4.25 KVM_IRQ_LINE
Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86, ia64, arm
Type: vm ioctl
Parameters: struct kvm_irq_level
Returns: 0 on success, -1 on error
Sets the level of a GSI input to the interrupt controller model in the kernel.
-Requires that an interrupt controller model has been previously created with
-KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level
-to be set to 1 and then back to 0.
+On some architectures it is required that an interrupt controller model has
+been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered
+interrupts require the level to be set to 1 and then back to 0.
+
+ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip
+(GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for
+specific cpus. The irq field is interpreted like this:
+
+ bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 |
+ field: | irq_type | vcpu_index | irq_id |
+
+The irq_type field has the following values:
+- irq_type[0]: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ
+- irq_type[1]: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.)
+ (the vcpu_index field is ignored)
+- irq_type[2]: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.)
+
+(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs)
+
+In both cases, level is used to raise/lower the line.
struct kvm_irq_level {
union {
#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
HCR_SWIO | HCR_TIDCP)
+#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
/* Hyp System Control Register (HSCTLR) bits */
#define HSCTLR_TE (1 << 30)
#include <asm/ptrace.h>
#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4)
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_TYPE_SHIFT 24
+#define KVM_ARM_IRQ_TYPE_MASK 0xff
+#define KVM_ARM_IRQ_VCPU_SHIFT 16
+#define KVM_ARM_IRQ_VCPU_MASK 0xff
+#define KVM_ARM_IRQ_NUM_SHIFT 0
+#define KVM_ARM_IRQ_NUM_MASK 0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU 0
+#define KVM_ARM_IRQ_TYPE_SPI 1
+#define KVM_ARM_IRQ_TYPE_PPI 2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ 0
+#define KVM_ARM_IRQ_CPU_FIQ 1
+
+/* Highest supported SPI, from VGIC_NR_IRQS */
+#define KVM_ARM_IRQ_GIC_MAX 127
+
#endif /* __ARM_KVM_H__ */
#include <linux/fs.h>
#include <linux/mman.h>
#include <linux/sched.h>
+#include <linux/kvm.h>
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
+ vcpu->cpu = cpu;
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
return -EINVAL;
}
+static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level)
+{
+ int bit_index;
+ bool set;
+ unsigned long *ptr;
+
+ if (number == KVM_ARM_IRQ_CPU_IRQ)
+ bit_index = __ffs(HCR_VI);
+ else /* KVM_ARM_IRQ_CPU_FIQ */
+ bit_index = __ffs(HCR_VF);
+
+ ptr = (unsigned long *)&vcpu->arch.irq_lines;
+ if (level)
+ set = test_and_set_bit(bit_index, ptr);
+ else
+ set = test_and_clear_bit(bit_index, ptr);
+
+ /*
+ * If we didn't change anything, no need to wake up or kick other CPUs
+ */
+ if (set == level)
+ return 0;
+
+ /*
+ * The vcpu irq_lines field was updated, wake up sleeping VCPUs and
+ * trigger a world-switch round on the running physical CPU to set the
+ * virtual IRQ/FIQ fields in the HCR appropriately.
+ */
+ kvm_vcpu_kick(vcpu);
+
+ return 0;
+}
+
+int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level)
+{
+ u32 irq = irq_level->irq;
+ unsigned int irq_type, vcpu_idx, irq_num;
+ int nrcpus = atomic_read(&kvm->online_vcpus);
+ struct kvm_vcpu *vcpu = NULL;
+ bool level = irq_level->level;
+
+ irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
+ vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
+ irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
+
+ trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
+
+ if (irq_type != KVM_ARM_IRQ_TYPE_CPU)
+ return -EINVAL;
+
+ if (vcpu_idx >= nrcpus)
+ return -EINVAL;
+
+ vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+ if (!vcpu)
+ return -EINVAL;
+
+ if (irq_num > KVM_ARM_IRQ_CPU_FIQ)
+ return -EINVAL;
+
+ return vcpu_interrupt_line(vcpu, irq_num, level);
+}
+
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
);
+TRACE_EVENT(kvm_irq_line,
+ TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level),
+ TP_ARGS(type, vcpu_idx, irq_num, level),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, type )
+ __field( int, vcpu_idx )
+ __field( int, irq_num )
+ __field( int, level )
+ ),
+
+ TP_fast_assign(
+ __entry->type = type;
+ __entry->vcpu_idx = vcpu_idx;
+ __entry->irq_num = irq_num;
+ __entry->level = level;
+ ),
+
+ TP_printk("Inject %s interrupt (%d), vcpu->idx: %d, num: %d, level: %d",
+ (__entry->type == KVM_ARM_IRQ_TYPE_CPU) ? "CPU" :
+ (__entry->type == KVM_ARM_IRQ_TYPE_PPI) ? "VGIC PPI" :
+ (__entry->type == KVM_ARM_IRQ_TYPE_SPI) ? "VGIC SPI" : "UNKNOWN",
+ __entry->type, __entry->vcpu_idx, __entry->irq_num, __entry->level)
+);
+
TRACE_EVENT(kvm_unmap_hva,
TP_PROTO(unsigned long hva),
TP_ARGS(hva),
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+ * For ARM: See Documentation/virtual/kvm/api.txt
*/
union {
__u32 irq;
projects / openwrt / staging / blogic.git / commitdiff