is specified and the ciu clock is specified then we'll try to set the ciu
clock to this at probe time.
-* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output
- clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
- (Use the "max-frequency" instead of "clock-freq-min-max".)
-
* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
value specified by num-slots. If this property is not specified, the value
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
+ mmc->f_min = DW_MCI_FREQ_MIN;
+ if (!mmc->f_max)
+ mmc->f_max = DW_MCI_FREQ_MAX;
+
/* Process SDIO IRQs through the sdio_irq_work. */
if (mmc->caps & MMC_CAP_SDIO_IRQ)
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
struct mmc_host *mmc;
struct dw_mci_slot *slot;
int ret;
- u32 freq[2];
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
if (!mmc)
host->slot = slot;
mmc->ops = &dw_mci_ops;
- if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
- freq, 2)) {
- mmc->f_min = DW_MCI_FREQ_MIN;
- mmc->f_max = DW_MCI_FREQ_MAX;
- } else {
- dev_info(host->dev,
- "'clock-freq-min-max' property was deprecated.\n");
- mmc->f_min = freq[0];
- mmc->f_max = freq[1];
- }
/*if there are external regulators, get them*/
ret = mmc_regulator_get_supply(mmc);