I-O DATA WN-AX1167GR2 is a 2.4/5 GHz band 11ac router, based on MediaTek
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : NAND 128 MiB
- WLAN : MediaTek MT7615D (2.4/5 GHz, 2T2R)
- Ethernet : 5x 10/100/1000 Mbps
- Switch : MediaTek MT7621A (MT7530)
- LEDs/Input : 2x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J5: Vcc, TX, RX, NC, GND
- 57600 bps
Flash instruction using initramfs image:
1. Boot WN-AX1167GR2 normally
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新")
button to perform firmware update
4. On the initramfs image, perform sysupgrade with squashfs-sysupgrade
image
5. Wait ~120 seconds to complete flashing
Notes:
- configuration in DeviceTree of DBDC (Dual-Band-Dual-Concurrent) mode
for MT7615D chip is not supported in mt76 driver
- last 0x80000 (512 KiB) in NAND flash is not used on stock firmware
- stock firmware requires "customized uImage header" by MSTC
(MitraStar Technology Corp.), but U-Boot doesn't
- uImage magic (0x0 - 0x3) : 0x434F4D42 (COMB)
- header crc32 (0x4 - 0x7) : with data length and data crc32
- image name (0x20 - 0x37) : model ID and firmware versions
- data length (0x38 - 0x3b): kernel + rootfs
- data crc32 (0x3c - 0x3f) : kernel + rootfs
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621_iodata_wn-xx-xr.dtsi"
+
+/ {
+ compatible = "iodata,wn-ax1167gr2", "mediatek,mt7621-soc";
+ model = "I-O DATA WN-AX1167GR2";
+};
+
+&partitions {
+ partition@6b00000 {
+ label = "Backup";
+ reg = <0x6b00000 0x1480000>;
+ read-only;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
endef
TARGET_DEVICES += iodata_wn-ax1167gr
+define Device/iodata_wn-ax1167gr2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ UIMAGE_MAGIC := 0x434f4d42
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 51200k
+ DEVICE_VENDOR := I-O DATA
+ DEVICE_MODEL := WN-AX1167GR2
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage 3.10(XBC.1)b10 | \
+ iodata-mstc-header
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7615e wpad-basic
+endef
+TARGET_DEVICES += iodata_wn-ax1167gr2
+
define Device/iodata_wn-dx1167r
BLOCKSIZE := 128k
PAGESIZE := 2048
elecom,wrc-1900gst|\
elecom,wrc-2533gst|\
iodata,wn-ax1167gr|\
+ iodata,wn-ax1167gr2|\
iodata,wn-dx1167r|\
iodata,wn-gx300gr|\
iodata,wnpr2600g|\
xiaoyu,xy-c5)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
;;
+ iodata,wn-ax1167gr2|\
iodata,wn-dx1167r|\
xiaomi,mir3g-v2)
wan_mac=$(mtd_get_mac_binary factory 0xe006)
xiaomi,mir3p)
nand_do_upgrade "$1"
;;
+ iodata,wn-ax1167gr2|\
iodata,wn-dx1167r)
iodata_mstc_upgrade_prepare
nand_do_upgrade "$1"