Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,wbs210-v1", "qca,ar9344";
+ model = "TP-Link WBS210 v1";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
+tplink,wbs210-v1|\
tplink,wbs210-v2|\
tplink,wbs510-v1|\
tplink,wbs510-v2)
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
+ tplink,wbs210-v1|\
tplink,wbs210-v2|\
tplink,wbs510-v1|\
tplink,wbs510-v2|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
+tplink,wbs210-v1|\
tplink,wbs210-v2|\
tplink,wbs510-v1|\
tplink,wbs510-v2)
endef
TARGET_DEVICES += tplink_tl-wr902ac-v1
+define Device/tplink_wbs210-v1
+ $(Device/tplink-safeloader-okli)
+ SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := WBS210
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := WBS210
+ SUPPORTED_DEVICES += wbs210
+endef
+TARGET_DEVICES += tplink_wbs210-v1
+
define Device/tplink_wbs210-v2
$(Device/tplink-safeloader-okli)
SOC := ar9344