PKG_NAME:=uboot-envtools
PKG_DISTNAME:=u-boot
PKG_VERSION:=2024.01
-PKG_RELEASE:=2
+PKG_RELEASE:=3
PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \
checkpoint,l-50|\
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
+dlink,dns320l|\
globalscale,sheevaplug|\
iom,ix2-200|\
iom,ix4-200d|\
include $(TOPDIR)/rules.mk
PKG_VERSION:=2020.04
-PKG_RELEASE:=9
+PKG_RELEASE:=10
PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372
BUILD_SUBTARGET:=generic
endef
+define U-Boot/dns320l
+ NAME:=D-Link DNS-320L
+ BUILD_DEVICES:=dlink_dns320l
+endef
+
define U-Boot/dockstar
NAME:=Seagate DockStar
BUILD_DEVICES:=seagate_dockstar
endef
UBOOT_TARGETS := \
+ dns320l \
dockstar dockstar_second_stage \
goflexhome \
ib62x0 ib62x0_second_stage \
--- /dev/null
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -28,6 +28,9 @@ config TARGET_POGO_E02
+ config TARGET_POGOPLUGV4
+ bool "Pogoplug V4 Board"
+
++config TARGET_DNS320L
++ bool "dns320l Board"
++
+ config TARGET_DNS325
+ bool "dns325 Board"
+
+@@ -93,6 +96,7 @@ source "board/Marvell/sheevaplug/Kconfig
+ source "board/buffalo/lsxl/Kconfig"
+ source "board/cloudengines/pogo_e02/Kconfig"
+ source "board/cloudengines/pogoplugv4/Kconfig"
++source "board/d-link/dns320l/Kconfig"
+ source "board/d-link/dns325/Kconfig"
+ source "board/iomega/iconnect/Kconfig"
+ source "board/keymile/Kconfig"
+--- /dev/null
++++ b/board/d-link/dns320l/dns320l.c
+@@ -0,0 +1,113 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (C) 2015
++ * Gerald Kerma <dreagle@doukki.net>
++ * Tony Dinh <mibodhi@gmail.com>
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <net.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/soc.h>
++#include <asm/arch/mpp.h>
++#include <asm/arch/gpio.h>
++#include <asm/io.h>
++#include "dns320l.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++ /*
++ * default gpio configuration
++ * There are maximum 64 gpios controlled through 2 sets of registers
++ * the below configuration configures mainly initial LED status
++ */
++ mvebu_config_gpio(DNS320L_OE_VAL_LOW, DNS320L_OE_VAL_HIGH,
++ DNS320L_OE_LOW, DNS320L_OE_HIGH);
++
++ /* (all LEDs & power off active high) */
++ /* Multi-Purpose Pins Functionality configuration */
++ static const u32 kwmpp_config[] = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP6_SYSRST_OUTn,
++ MPP7_GPO,
++ MPP8_TW_SDA,
++ MPP9_TW_SCK,
++ MPP10_UART0_TXD,
++ MPP11_UART0_RXD,
++ MPP12_GPO,
++ MPP13_GPIO,
++ MPP14_GPIO,
++ MPP15_GPIO,
++ MPP16_GPIO,
++ MPP17_GPIO,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP20_SATA1_ACTn, /* sata1(left) status led */
++ MPP21_SATA0_ACTn, /* sata0(right) status led */
++ MPP22_GPIO,
++ MPP23_GPIO,
++ MPP24_GPIO,
++ MPP25_GPIO,
++ MPP26_GPIO,
++ MPP27_GPIO,
++ MPP28_GPIO,
++ MPP29_GPIO,
++ MPP30_GPIO,
++ MPP31_GPIO,
++ MPP32_GPIO,
++ 0
++ };
++ kirkwood_mpp_conf(kwmpp_config, NULL);
++
++ kw_gpio_set_value(DNS320L_GPIO_SATA_EN , 1);
++
++ return 0;
++}
++
++int board_init(void)
++{
++ /* address of boot parameters */
++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
++
++ return 0;
++}
++
++#ifdef CONFIG_RESET_PHY_R
++/* Configure and initialize PHY */
++void reset_phy(void)
++{
++ u16 reg;
++ u16 phyaddr;
++ char *name = "egiga0";
++
++ if (miiphy_set_current_dev(name))
++ return;
++
++ /* read PHY dev address */
++ if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
++ printf("could not read PHY dev address\n");
++ return;
++ }
++
++ /* set RGMII delay */
++ miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
++ miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®);
++ reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
++ miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
++ miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
++
++ /* reset PHY */
++ if (miiphy_reset(name, phyaddr))
++ return;
++
++ printf("MV88E1318 PHY initialized on %s\n", name);
++}
++#endif /* CONFIG_RESET_PHY_R */
+--- /dev/null
++++ b/board/d-link/dns320l/dns320l.h
+@@ -0,0 +1,39 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2011
++ * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++ */
++
++#ifndef __DNS320L_H
++#define __DNS320L_H
++
++/* GPIO configuration */
++#define DNS320L_GPIO_SATA_EN 24
++#define HDD_L_GREEN_LED (1 << 22)
++#define HDD_R_GREEN_LED (1 << 23)
++#define USB_BLUE_LED (1 << 25)
++#define USB_ORANGE_LED (1 << 26)
++
++#define DNS320L_OE_LOW (~(HDD_L_GREEN_LED | HDD_R_GREEN_LED | \
++ USB_BLUE_LED | USB_ORANGE_LED))
++#define DNS320L_OE_VAL_LOW (0)
++
++/* high GPIO's */
++#define WATCHDOG_SIGNAL (1 << 14)
++
++#define DNS320L_OE_HIGH (~(WATCHDOG_SIGNAL))
++#define DNS320L_OE_VAL_HIGH ((WATCHDOG_SIGNAL))
++
++/* PHY related */
++#define MV88E1318_PGADR_REG 22
++#define MV88E1318_MAC_CTRL_PG 2
++#define MV88E1318_MAC_CTRL_REG 21
++#define MV88E1318_RGMII_TX_CTRL (1 << 4)
++#define MV88E1318_RGMII_RX_CTRL (1 << 5)
++
++#endif /* __DNS320L_H */
+--- /dev/null
++++ b/board/d-link/dns320l/Kconfig
+@@ -0,0 +1,18 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <dreagle@doukki.net>
++# Tony Dinh <mibodhi@gmail.com>
++
++if TARGET_DNS320L
++
++config SYS_BOARD
++ default "dns320l"
++
++config SYS_VENDOR
++ default "d-link"
++
++config SYS_CONFIG_NAME
++ default "dns320l"
++
++endif
+--- /dev/null
++++ b/board/d-link/dns320l/kwbimage.cfg
+@@ -0,0 +1,41 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <dreagle@doukki.net>
++# Tony Dinh <mibodhi@gmail.com>
++# Refer to doc/README.kwbimage for more details about how-to
++# configure and create kirkwood boot images.
++#
++
++# Boot Media configurations
++BOOT_FROM nand
++NAND_ECC_MODE default
++NAND_PAGE_SIZE 0x0800
++
++# Configure RGMII-0 interface pad voltage to 1.8V
++DATA 0xFFD100e0 0x1b1b1b9b
++
++DATA 0xFFD01400 0x43010c30
++DATA 0xFFD01404 0x39543000
++DATA 0xFFD01408 0x22125451
++DATA 0xFFD0140C 0x00000833
++DATA 0xFFD01410 0x0000000C
++DATA 0xFFD01414 0x00000000
++DATA 0xFFD01418 0x00000000
++DATA 0xFFD0141C 0x00000652
++DATA 0xFFD01420 0x00000004
++DATA 0xFFD01424 0x0000F17F
++DATA 0xFFD01428 0x00085520
++DATA 0xFFD0147c 0x00008552
++DATA 0xFFD01504 0x0FFFFFF1
++DATA 0xFFD01508 0x10000000
++DATA 0xFFD0150C 0x00000000
++DATA 0xFFD01514 0x00000000
++DATA 0xFFD0151C 0x00000000
++DATA 0xFFD01494 0x00010000
++DATA 0xFFD01498 0x00000000
++DATA 0xFFD0149C 0x0000E403
++DATA 0xFFD01480 0x00000001
++DATA 0xFFD20134 0x66666666
++DATA 0xFFD20138 0x66666666
++DATA 0x0 0x0
+--- /dev/null
++++ b/board/d-link/dns320l/MAINTAINERS
+@@ -0,0 +1,8 @@
++NSA310S BOARD
++M: Gerald Kerma <dreagle@doukki.net>
++M: Tony Dinh <mibodhi@gmail.com>
++M: Luka Perkov <luka.perkov@sartura.hr>
++S: Maintained
++F: board/d-link/dns320l/
++F: include/configs/dns320l.h
++F: configs/dns320l_defconfig
+--- /dev/null
++++ b/board/d-link/dns320l/Makefile
+@@ -0,0 +1,7 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <dreagle@doukki.net>
++# Tony Dinh <mibodhi@gmail.com>
++
++obj-y := dns320l.o
+--- /dev/null
++++ b/configs/dns320l_defconfig
+@@ -0,0 +1,48 @@
++CONFIG_ARM=y
++CONFIG_SYS_DCACHE_OFF=y
++CONFIG_ARCH_CPU_INIT=y
++CONFIG_KIRKWOOD=y
++CONFIG_SYS_TEXT_BASE=0x600000
++CONFIG_TARGET_DNS320L=y
++CONFIG_ENV_SIZE=0x20000
++CONFIG_ENV_OFFSET=0x100000
++CONFIG_NR_DRAM_BANKS=2
++CONFIG_BOOTDELAY=3
++CONFIG_USE_PREBOOT=y
++# CONFIG_DISPLAY_BOARDINFO is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="dns320l => "
++CONFIG_CMD_BOOTZ=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_IDE=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_MII=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_EXT2=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_JFFS2=y
++CONFIG_CMD_MTDPARTS=y
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x100000@0x0(uboot),0x20000@0x100000(ubootenv),0x6de0000@0x120000(ubi),0xa00000@0x6f00000(mini),0x500000@0x7900000(config),0x200000@0x7e00000(my-dlink)"
++CONFIG_CMD_UBI=y
++CONFIG_ISO_PARTITION=y
++CONFIG_ENV_IS_IN_NAND=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_MVSATA_IDE=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_RAW_NAND=y
++CONFIG_MVGBE=y
++CONFIG_MII=y
++CONFIG_SYS_NS16550=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_LZMA=y
++CONFIG_LZO=y
++CONFIG_OF_LIBFDT=y
++CONFIG_NET_RANDOM_ETHADDR=y
+--- /dev/null
++++ b/include/configs/dns320l.h
+@@ -0,0 +1,69 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2015
++ * Gerald Kerma <dreagle@doukki.net>
++ * Tony Dinh <mibodhi@gmail.com>
++ * Luka Perkov <luka.perkov@sartura.hr>
++ */
++
++#ifndef _CONFIG_DNS320L_H
++#define _CONFIG_DNS320L_H
++
++/* high level configuration options */
++#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
++#define CONFIG_KW88F6192 1 /* SOC Name */
++#define CONFIG_KW88F6702 1 /* SOC Name */
++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
++
++/* compression configuration */
++#define CONFIG_BZIP2
++
++/* commands configuration */
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++/* environment variables configuration */
++
++/* default environment variables */
++#define CONFIG_BOOTCOMMAND \
++ "ubi part ubi; " \
++ "ubi read 0x800000 kernel; " \
++ "bootm 0x800000"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "console=console=ttyS0,115200\0" \
++ "mtdids=nand0=orion_nand\0" \
++ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
++ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
++
++/* Ethernet driver configuration */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_NETCONSOLE
++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
++#define CONFIG_PHY_BASE_ADR 1
++#define CONFIG_RESET_PHY_R
++#endif /* CONFIG_CMD_NET */
++
++/* SATA driver configuration */
++#ifdef CONFIG_IDE
++#define __io
++#define CONFIG_IDE_PREINIT
++#define CONFIG_MVSATA_IDE_USE_PORT0
++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
++#endif /* CONFIG_IDE */
++
++/*
++ * Enable GPI0 support
++*/
++#define CONFIG_KIRKWOOD_GPIO
++
++/* RTC driver configuration */
++#ifdef CONFIG_CMD_DATE
++#define CONFIG_RTC_MV
++#endif /* CONFIG_CMD_DATE */
++
++#endif /* _CONFIG_DNS320L_H */
--- /dev/null
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dns320l-mcu
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=https://github.com/wigyori/dns320l-daemon.git
+PKG_SOURCE_DATE:=2024-05-11
+PKG_SOURCE_VERSION:=c74941880e0a8d2bc0344b3256b984397512e8c3
+PKG_MIRROR_HASH:=e0f186a0c139ccfac3d311f49e2fecdbd02fa3f9fe6ced4b1ce0baa603d49fc3
+PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
+PKG_LICENSE:=GPL-3.0+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dns320l-mcu
+ SECTION:=utils
+ CATEGORY:=Utilities
+ TITLE:=Utility to control the MCU on DNS-320L
+ DEPENDS:=@TARGET_kirkwood
+ URL:=https://github.com/wigyori/dns320l-mcu
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS) -Wall"
+endef
+
+define Package/dns320l-mcu/install
+ $(INSTALL_DIR) $(1)/usr/bin $(1)/etc/init.d
+ $(INSTALL_BIN) ./files/dns320l-mcu.init $(1)/etc/init.d/dns320l-mcu
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/dns320l-daemon $(1)/usr/bin/dns320l-mcu
+endef
+
+$(eval $(call BuildPackage,dns320l-mcu))
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright (c) 2024 OpenWrt.org
+
+START=99
+
+USE_PROCD=1
+PROG=/usr/bin/dns320l-mcu
+
+start_service() {
+ procd_open_instance
+ procd_set_param command "$PROG"
+ procd_set_param respawn
+ procd_close_instance
+}
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
ctera,c200-v1|\
+ dlink,dns320l|\
globalscale,sheevaplug|\
iom,iconnect-1.1|\
iom,ix2-200|\
local label_mac=""
case "$board" in
+ dlink,dns320l)
+ lan_mac=$(mtd_get_mac_text "mini firmware")
+ ;;
iptime,nas1)
lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
label_mac=$lan_mac
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree file for DLINK DNS-320L
+ *
+ * Copyright (C) 2024, Zoltan HERPAI <wigyori@uid0.hu>
+ * Copyright (C) 2015, Sunke Schlüters <sunke-dev@schlueters.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is based on the works of:
+ * - Sunke Schlüters <sunke-dev@schlueters.de>
+ * - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
+ * - Andreas Böhler <dev@aboehler.at>:
+ * - http://www.aboehler.at/doku/doku.php/projects:dns320l
+ * - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "D-Link DNS-320L";
+ compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Reset push button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 28 1>;
+ };
+
+ button@2 {
+ label = "USB unmount button";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&gpio0 27 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds>;
+ pinctrl-names = "default";
+
+ blue-usb {
+ label = "dns320l:usb:blue";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ };
+
+ orange-usb {
+ label = "dns320l:usb:orange";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ orange-l-hdd {
+ label = "dns320l:orange:l_hdd";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ orange-r-hdd {
+ label = "dns320l:orange:r_hdd";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ serial@12100 {
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_sata>;
+ pinctrl-names = "default";
+
+ sata_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 24 0>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+ chip-delay = <40>;
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition@100000 {
+ label = "ubootenv";
+ reg = <0x100000 0x20000>;
+ };
+
+ partition@120000 {
+ label = "ubi";
+ reg = <0x120000 0x6de0000>;
+ };
+
+ partition@6f00000 {
+ label = "mini firmware";
+ reg = <0x6f00000 0xa00000>;
+ };
+
+ partition@7900000 {
+ label = "config";
+ reg = <0x7900000 0x500000>;
+ };
+
+ partition@7e00000 {
+ label = "my-dlink";
+ reg = <0x7e00000 0x200000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+
+ pmx_power_sata: pmx-power-sata {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree file for DLINK DNS-320L
+ *
+ * Copyright (C) 2024, Zoltan HERPAI <wigyori@uid0.hu>
+ * Copyright (C) 2015, Sunke Schlüters <sunke-dev@schlueters.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is based on the works of:
+ * - Sunke Schlüters <sunke-dev@schlueters.de>
+ * - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
+ * - Andreas Böhler <dev@aboehler.at>:
+ * - http://www.aboehler.at/doku/doku.php/projects:dns320l
+ * - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "D-Link DNS-320L";
+ compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Reset push button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 28 1>;
+ };
+
+ button@2 {
+ label = "USB unmount button";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&gpio0 27 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds>;
+ pinctrl-names = "default";
+
+ blue-usb {
+ label = "dns320l:usb:blue";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ };
+
+ orange-usb {
+ label = "dns320l:usb:orange";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ orange-l-hdd {
+ label = "dns320l:orange:l_hdd";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ orange-r-hdd {
+ label = "dns320l:orange:r_hdd";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ serial@12100 {
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_sata>;
+ pinctrl-names = "default";
+
+ sata_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 24 0>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+ chip-delay = <40>;
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition@100000 {
+ label = "ubootenv";
+ reg = <0x100000 0x20000>;
+ };
+
+ partition@120000 {
+ label = "ubi";
+ reg = <0x120000 0x6de0000>;
+ };
+
+ partition@6f00000 {
+ label = "mini firmware";
+ reg = <0x6f00000 0xa00000>;
+ };
+
+ partition@7900000 {
+ label = "config";
+ reg = <0x7900000 0x500000>;
+ };
+
+ partition@7e00000 {
+ label = "my-dlink";
+ reg = <0x7e00000 0x200000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+
+ pmx_power_sata: pmx-power-sata {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
endef
TARGET_DEVICES += ctera_c200-v1
+define Device/dlink_dns320l
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DNS-320L
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug \
+ kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu
+endef
+TARGET_DEVICES += dlink_dns320l
+
define Device/endian_4i-edge-200
DEVICE_VENDOR := Endian
DEVICE_MODEL := 4i Edge 200
--- /dev/null
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-db-88f6282.dtb \
+ kirkwood-dir665.dtb \
+ kirkwood-dns320.dtb \
++ kirkwood-dns320l.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dockstar.dtb \
+ kirkwood-dreamplug.dtb \
+--- a/arch/arm/boot/dts/kirkwood-dns320l.dts
++++ b/arch/arm/boot/dts/kirkwood-dns320l.dts
+@@ -32,6 +32,13 @@
+ reg = <0x00000000 0x10000000>;
+ };
+
++ aliases {
++ led-boot = &led_orange_usb;
++ led-failsafe = &led_orange_usb;
++ led-running = &led_orange_usb;
++ led-upgrade = &led_orange_usb;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+@@ -68,7 +75,7 @@
+ linux,default-trigger = "usbport";
+ };
+
+- orange-usb {
++ led_orange_usb: orange-usb {
+ label = "dns320l:usb:orange";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+--- a/arch/arm/boot/dts/marvell/Makefile
++++ b/arch/arm/boot/dts/marvell/Makefile
+@@ -92,6 +92,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-db-88f6282.dtb \
+ kirkwood-dir665.dtb \
+ kirkwood-dns320.dtb \
++ kirkwood-dns320l.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dockstar.dtb \
+ kirkwood-dreamplug.dtb \
+--- a/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
+@@ -32,6 +32,13 @@
+ reg = <0x00000000 0x10000000>;
+ };
+
++ aliases {
++ led-boot = &led_orange_usb;
++ led-failsafe = &led_orange_usb;
++ led-running = &led_orange_usb;
++ led-upgrade = &led_orange_usb;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+@@ -68,7 +75,7 @@
+ linux,default-trigger = "usbport";
+ };
+
+- orange-usb {
++ led_orange_usb: orange-usb {
+ label = "dns320l:usb:orange";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
projects / openwrt / staging / jow.git / commitdiff