ARM: uniphier: change UNIPHIER_SERIAL to default y option

This is very likely to be necessary for normal use cases.
Set its default to 'y' for shorter defconfig files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/configs/uniphier_ld11_defconfig b/configs/uniphier_ld11_defconfig
index 57b9c07c77b0de998c807ac729caf27522c47014..9b32d68617ab6826189aa2f7e34eb0c7efad03c1 100644 (file)
--- a/configs/uniphier_ld11_defconfig
+++ b/configs/uniphier_ld11_defconfig
@@ -25,7 +25,6 @@ CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y

diff --git a/configs/uniphier_ld20_defconfig b/configs/uniphier_ld20_defconfig
index e6aa525ca5baf1a8d60cd9077686aa840b7711a5..76233810198f96e95c6ba1c8de49518da500177d 100644 (file)
--- a/configs/uniphier_ld20_defconfig
+++ b/configs/uniphier_ld20_defconfig
@@ -26,7 +26,6 @@ CONFIG_I2C_EEPROM=y
 CONFIG_MMC_UNIPHIER=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y

diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index 47b577af7c9459ff691a5fdd16feabf64de8226a..f51e0da723767b33e53ed143bc751ef8519fd12a 100644 (file)
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -31,7 +31,6 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
 CONFIG_SPL_NAND_DENALI=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y

diff --git a/configs/uniphier_pro4_defconfig b/configs/uniphier_pro4_defconfig
index e156ec533adad663261063375ad40d3f6f70f89f..c47d02fc2a271545b767cefcff7f8cbd8487dea0 100644 (file)
--- a/configs/uniphier_pro4_defconfig
+++ b/configs/uniphier_pro4_defconfig
@@ -30,7 +30,6 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
 CONFIG_SPL_NAND_DENALI=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y

diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig
index f943516a90bc59fbbeeba461db86639cd7399f6f..9eebad177685eece58f70be3587644c27bf0df8d 100644 (file)
--- a/configs/uniphier_pxs2_ld6b_defconfig
+++ b/configs/uniphier_pxs2_ld6b_defconfig
@@ -31,7 +31,6 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
 CONFIG_SPL_NAND_DENALI=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y

diff --git a/configs/uniphier_sld3_defconfig b/configs/uniphier_sld3_defconfig
index 4cbd01ceb6a8e951235edd8500ca5ee2431830c8..6f31dd4cfc501846f5ee5fad13dd09e9d7a3868e 100644 (file)
--- a/configs/uniphier_sld3_defconfig
+++ b/configs/uniphier_sld3_defconfig
@@ -29,7 +29,6 @@ CONFIG_NAND_DENALI=y
 CONFIG_SYS_NAND_DENALI_64BIT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
 CONFIG_SPL_NAND_DENALI=y
-CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9ff7234d61e787ce4f2a201f0a1569ed220ea06c..ab5df70bfc5e5ade49a7da5461ef260270846478 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -344,6 +344,7 @@ config SANDBOX_SERIAL
 config UNIPHIER_SERIAL
        bool "Support for UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
+       default y
        help
          If you have a UniPhier based board and want to use the on-chip
          serial ports, say Y to this option. If unsure, say N.