Enabling DM_MMC is forcing CONFIG_BLK=y so if any board which uses
SCSI must need to enable DM_SCSI otherwise SCSI reads on that particular
target making invalid reading to the disk drive.
Allwinner platform do support SCSI on A10, A20 and R40 SoC's out of
these only A10 have DM_SCSI enabled. So enabling DM_MMC on A20, R40
would eventually end-up with scsi disk read failures like [1]
So, enable DM_MMC in all places of respective SoC's instead of enabling
them globally to Allwinner platform.
Now, DM_MMC is enabled in Allwinner SoC's except A20 and R40.
[1] https://lists.denx.de/pipermail/u-boot/2019-April/364057.html
Reported-by: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
- select DM_MMC if MMC
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
bool "sun4i (Allwinner A10)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
+ select DM_MMC if MMC
select DM_SCSI if SCSI
select PHY_SUN4I_USB
select DRAM_SUN4I
bool "sun5i (Allwinner A13)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
+ select DM_MMC if MMC
select DRAM_SUN4I
select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DM_MMC if MMC
select DRAM_SUN6I
select PHY_SUN4I_USB
select SUN6I_P2WI
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DM_MMC if MMC
select DRAM_SUN8I_A23
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DM_MMC if MMC
select DRAM_SUN8I_A33
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7A
+ select DM_MMC if MMC
select DRAM_SUN8I_A83T
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select ARCH_SUPPORT_PSCI
select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+ select DM_MMC if MMC
config MACH_SUN8I_R40
bool "sun8i (Allwinner R40)"
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DM_MMC if MMC
select SUNXI_GEN_SUN6I
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_16BIT
select SUNXI_GEN_SUN6I
select SUN8I_RSB
select SUPPORT_SPL
+ select DM_MMC if MMC
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select DM_I2C
+ select DM_MMC if MMC
select PHY_SUN4I_USB
select SUN6I_PRCM
select SUNXI_DE2
bool "sun50i (Allwinner H5)"
select ARM64
select MACH_SUNXI_H3_H5
+ select DM_MMC if MMC
select FIT
select SPL_LOAD_FIT
bool "sun50i (Allwinner H6)"
select ARM64
select SUPPORT_SPL
+ select DM_MMC if MMC
select FIT
select SPL_LOAD_FIT
select DRAM_SUN50I_H6