scripts/target-metadata.pl: order features alphabetically

We generaly do this in many other places, so let's do it here also.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

diff --git a/scripts/target-metadata.pl b/scripts/target-metadata.pl
index 990235182dd5ebb95f74b64aaff3efb3d3ef7700..dff24998cd2b6c725dcf4b7c225180ab29f33201 100755 (executable)
--- a/scripts/target-metadata.pl
+++ b/scripts/target-metadata.pl
@@ -10,42 +10,42 @@ sub target_config_features(@) {
 
        while ($_ = shift @_) {
                /^arm_v(\w+)$/ and $ret .= "\tselect arm_v$1\n";
-               /^broken$/ and $ret .= "\tdepends on BROKEN\n";
                /^audio$/ and $ret .= "\tselect AUDIO_SUPPORT\n";
+               /^boot-part$/ and $ret .= "\tselect USES_BOOT_PART\n";
+               /^broken$/ and $ret .= "\tdepends on BROKEN\n";
+               /^cpiogz$/ and $ret .= "\tselect USES_CPIOGZ\n";
                /^display$/ and $ret .= "\tselect DISPLAY_SUPPORT\n";
                /^dt$/ and $ret .= "\tselect USES_DEVICETREE\n";
+               /^dt-overlay$/ and $ret .= "\tselect HAS_DT_OVERLAY_SUPPORT\n";
+               /^ext4$/ and $ret .= "\tselect USES_EXT4\n";
+               /^fpu$/ and $ret .= "\tselect HAS_FPU\n";
                /^gpio$/ and $ret .= "\tselect GPIO_SUPPORT\n";
+               /^jffs2$/ and $ret .= "\tselect USES_JFFS2\n";
+               /^jffs2_nand$/ and $ret .= "\tselect USES_JFFS2_NAND\n";
+               /^low_mem$/ and $ret .= "\tselect LOW_MEMORY_FOOTPRINT\n";
+               /^minor$/ and $ret .= "\tselect USES_MINOR\n";
+               /^mips16$/ and $ret .= "\tselect HAS_MIPS16\n";
+               /^nand$/ and $ret .= "\tselect NAND_SUPPORT\n";
+               /^nommu$/ and $ret .= "\tselect NOMMU\n";
                /^pci$/ and $ret .= "\tselect PCI_SUPPORT\n";
                /^pcie$/ and $ret .= "\tselect PCIE_SUPPORT\n";
-               /^usb$/ and $ret .= "\tselect USB_SUPPORT\n";
-               /^usbgadget$/ and $ret .= "\tselect USB_GADGET_SUPPORT\n";
                /^pcmcia$/ and $ret .= "\tselect PCMCIA_SUPPORT\n";
+               /^powerpc64$/ and $ret .= "\tselect powerpc64\n";
                /^pwm$/ and $ret .= "\select PWM_SUPPORT\n";
+               /^ramdisk$/ and $ret .= "\tselect USES_INITRAMFS\n";
+               /^rfkill$/ and $ret .= "\tselect RFKILL_SUPPORT\n";
+               /^rootfs-part$/ and $ret .= "\tselect USES_ROOTFS_PART\n";
                /^rtc$/ and $ret .= "\tselect RTC_SUPPORT\n";
+               /^separate_ramdisk$/ and $ret .= "\tselect USES_INITRAMFS\n\tselect USES_SEPARATE_INITRAMFS\n";
+               /^small_flash$/ and $ret .= "\tselect SMALL_FLASH\n";
+               /^spe_fpu$/ and $ret .= "\tselect HAS_SPE_FPU\n";
                /^squashfs$/ and $ret .= "\tselect USES_SQUASHFS\n";
-               /^jffs2$/ and $ret .= "\tselect USES_JFFS2\n";
-               /^jffs2_nand$/ and $ret .= "\tselect USES_JFFS2_NAND\n";
-               /^ext4$/ and $ret .= "\tselect USES_EXT4\n";
                /^targz$/ and $ret .= "\tselect USES_TARGZ\n";
-               /^cpiogz$/ and $ret .= "\tselect USES_CPIOGZ\n";
-               /^minor$/ and $ret .= "\tselect USES_MINOR\n";
+               /^testing-kernel$/ and $ret .= "\tselect HAS_TESTING_KERNEL\n";
                /^ubifs$/ and $ret .= "\tselect USES_UBIFS\n";
-               /^fpu$/ and $ret .= "\tselect HAS_FPU\n";
-               /^spe_fpu$/ and $ret .= "\tselect HAS_SPE_FPU\n";
-               /^ramdisk$/ and $ret .= "\tselect USES_INITRAMFS\n";
-               /^separate_ramdisk$/ and $ret .= "\tselect USES_INITRAMFS\n\tselect USES_SEPARATE_INITRAMFS\n";
-               /^powerpc64$/ and $ret .= "\tselect powerpc64\n";
-               /^nommu$/ and $ret .= "\tselect NOMMU\n";
-               /^mips16$/ and $ret .= "\tselect HAS_MIPS16\n";
-               /^rfkill$/ and $ret .= "\tselect RFKILL_SUPPORT\n";
-               /^low_mem$/ and $ret .= "\tselect LOW_MEMORY_FOOTPRINT\n";
-               /^small_flash$/ and $ret .= "\tselect SMALL_FLASH\n";
-               /^nand$/ and $ret .= "\tselect NAND_SUPPORT\n";
+               /^usb$/ and $ret .= "\tselect USB_SUPPORT\n";
+               /^usbgadget$/ and $ret .= "\tselect USB_GADGET_SUPPORT\n";
                /^virtio$/ and $ret .= "\tselect VIRTIO_SUPPORT\n";
-               /^rootfs-part$/ and $ret .= "\tselect USES_ROOTFS_PART\n";
-               /^boot-part$/ and $ret .= "\tselect USES_BOOT_PART\n";
-               /^testing-kernel$/ and $ret .= "\tselect HAS_TESTING_KERNEL\n";
-               /^dt-overlay$/ and $ret .= "\tselect HAS_DT_OVERLAY_SUPPORT\n";
        }
        return $ret;
 }