--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-rutx.dtsi"
+
+/ {
+ model = "Teltonika RUTX50";
+ compatible = "teltonika,rutx50";
+
+ aliases {
+ led-boot = &led_rssi0;
+ led-failsafe = &led_rssi0;
+ led-running = &led_rssi0;
+ led-upgrade = &led_rssi0;
+ label-mac-device = &gmac;
+ };
+
+ soc {
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_modem_reset {
+ gpio-export,name = "modem_reset";
+ gpio-export,output = <0>;
+ gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_modem_power {
+ gpio-export,name = "modem_power";
+ gpio-export,output = <0>;
+ gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_out_1 {
+ gpio-export,name = "sim-select";
+ /* 0 = SIM1 ; 1 = SIM2 */
+ gpio-export,output = <0>;
+ gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_in_1 {
+ gpio-export,name = "sim-detect";
+ gpio-export,input = <0>;
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "green:sim1";
+ gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ label = "green:sim2";
+ gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "green:eth";
+ gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ label = "green:wifi";
+ gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ label = "green:3g";
+ gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-5 {
+ label = "green:4g";
+ gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-6 {
+ label = "green:5g";
+ gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_rssi0: led-7 {
+ label = "green:rssi0";
+ gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-8 {
+ label = "green:rssi1";
+ gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-9 {
+ label = "green:rssi2";
+ gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-10 {
+ label = "green:wifi2g";
+ gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-11 {
+ label = "green:wifi5g";
+ gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi-gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ shift_io: shift_io@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* Attn: This is specific to RUTX50 in Teltonika GPL */
+ registers-number = <2>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+
+ label = "lan1";
+};
+
+&swport2 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan3";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan4";
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "wan";
+};