realtek: Adding RTL930X sub-target

This adds the RTL931X sub-target in the realtek target Makefile.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>

diff --git a/target/linux/realtek/Makefile b/target/linux/realtek/Makefile
index b9063eb73a653f761ea2fc3f1cd40b7191a05422..26b7d0afaa5cbed08001b516ee979f546bb8d625 100644 (file)
--- a/target/linux/realtek/Makefile
+++ b/target/linux/realtek/Makefile
@@ -7,7 +7,7 @@ BOARD:=realtek
 BOARDNAME:=Realtek MIPS
 DEVICE_TYPE:=basic
 FEATURES:=ramdisk squashfs
-SUBTARGETS:=rtl838x rtl839x
+SUBTARGETS:=rtl838x rtl839x rtl930x
 
 KERNEL_PATCHVER:=5.10
 

diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
index a4c9757505f52a4ae0781fbfda3cddf0f493efb8..beae10c9ddebfa963345b325874b575dcb16dda3 100644 (file)
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi
@@ -2,51 +2,6 @@
 
 /dts-v1/;
 
-#define STRINGIZE(s) #s
-#define LAN_LABEL(p, s) STRINGIZE(p ## s)
-#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
-
-#define INTERNAL_PHY(n) \
-       phy##n: ethernet-phy@##n { \
-               reg = <##n>; \
-               compatible = "ethernet-phy-ieee802.3-c22"; \
-               phy-is-integrated; \
-       };
-
-#define EXTERNAL_PHY(n) \
-       phy##n: ethernet-phy@##n { \
-               reg = <##n>; \
-               compatible = "ethernet-phy-ieee802.3-c22"; \
-       };
-
-#define EXTERNAL_SFP_PHY(n) \
-       phy##n: ethernet-phy@##n { \
-               compatible = "ethernet-phy-ieee802.3-c22"; \
-               sfp; \
-               media = "fibre"; \
-               reg = <##n>; \
-       };
-
-#define SWITCH_PORT(n, s, m) \
-       port@##n { \
-               reg = <##n>; \
-               label = SWITCH_PORT_LABEL(s) ; \
-               phy-handle = <&phy##n>; \
-               phy-mode = #m ; \
-       };
-
-#define SWITCH_SFP_PORT(n, s, m) \
-       port@##n { \
-               reg = <##n>; \
-               label = SWITCH_PORT_LABEL(s) ; \
-               phy-handle = <&phy##n>; \
-               phy-mode = #m ; \
-               fixed-link { \
-                       speed = <1000>; \
-                       full-duplex; \
-               }; \
-       };
-
 / {
        #address-cells = <1>;
        #size-cells = <1>;
@@ -70,7 +25,7 @@
        };
 
        chosen {
-               bootargs = "console=ttyS0,115200";
+               bootargs = "console=ttyS0,38400";
        };
 
        cpuintc: cpuintc {
@@ -92,35 +47,24 @@
                #size-cells = <1>;
                ranges = <0x0 0x18000000 0x10000>;
 
-               intc: rtlintc@3000 {
-                       compatible = "realtek,rtl-intc";
-                       reg = <0x3000 0x20>;
-                       #address-cells = <0>;
-                       #interrupt-cells = <1>;
+               intc: interrupt-controller@3000 {
+                       compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+                       reg = <0x3000 0x18>, <0x3018 0x18>;
                        interrupt-controller;
-                       interrupt-map =
-                               <31 &cpuintc 1>, /* UART1 */
-                               <30 &cpuintc 2>, /* UART0 */
-                               <28 &cpuintc 1>, /* USB_H2 */
-                               <24 &cpuintc 4>, /* NIC */
-                               <23 &cpuintc 3>, /* SWCORE */
-                               <13 &cpuintc 4>, /* GPIO_ABCD */
-                               <11 &cpuintc 1>, /* TC4 */
-                               <10 &cpuintc 1>, /* TC3 */
-                               <9 &cpuintc 1>,  /* TC2 */
-                               <8 &cpuintc 1>,  /* TC1 */
-                               <7 &cpuintc 5>,  /* TC0 */
-                               <6 &cpuintc 5>,  /* WDT_IP2 */
-                               <5 &cpuintc 4>;  /* WDT_IP1 */
+                       #interrupt-cells = <2>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>, <3>, <4>, <5>, <6>;
                };
 
-               timer: timer@3200 {
-                       compatible = "realtek,rtl9300-timer";
-                       reg = <0x3200 0x60>;
+               rtl9300clock: rtl9300clock@3200 {
+                       compatible = "realtek,rtl9300clock";
+                       reg = <0xb8003200 0x10>;
+                       #address-cells = <0>;
+                       #interrupt-cells = <1>;
+
                        interrupt-parent = <&intc>;
-                       interrupts = <8>;
-                       interrupt-names = "ostimer";
-                       clocks = <&lx_clk>;
+                       interrupts = <7 1>, <8 2>;
                };
 
                spi0: spi@1200 {
@@ -135,10 +79,10 @@
                        compatible = "ns16550a";
                        reg = <0x2000 0x100>;
 
-                       clocks = <&lx_clk>;
+                       clock-frequency = <175000000>;
 
                        interrupt-parent = <&intc>;
-                       interrupts = <30>;
+                       interrupts = <30 1>;
 
                        reg-io-width = <1>;
                        reg-shift = <2>;
@@ -150,10 +94,10 @@
                        compatible = "ns16550a";
                        reg = <0x2100 0x100>;
 
-                       clocks = <&lx_clk>;
+                       clock-frequency = <175000000>;
 
                        interrupt-parent = <&intc>;
-                       interrupts = <31>;
+                       interrupts = <31 0>;
 
                        reg-io-width = <1>;
                        reg-shift = <2>;
@@ -174,32 +118,32 @@
 
                        interrupt-parent = <&intc>;
                        interrupt-names = "phase1", "phase2";
-                       interrupts = <5>, <6>;
+                       interrupts = <5 1>, <6 2>;
                };
 
-               gpio0: gpio-controller@3500 {
-                       compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
-                       reg = <0x3500 0x20>;
+               gpio0: gpio-controller@3300 {
+                       compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+                       reg = <0x3300 0x1c>, <0x3338 0x8>;
+
                        gpio-controller;
                        #gpio-cells = <2>;
-                       ngpios = <32>;
-                       interrupt-parent = <&intc>;
-                       interrupts = <31>;
+                       ngpios = <24>;
 
-                       /*
-                        * currently, RTL930x GPIO is not supported in
-                        * upstreamed driver (gpio-realtek-otto)
-                        */
-                       status = "disabled";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&intc>;
+                       interrupts = <13 1>;
                };
+
        };
 
        ethernet0: ethernet@1b00a300 {
                compatible = "realtek,rtl838x-eth";
                reg = <0x1b00a300 0x100>;
+
                interrupt-parent = <&intc>;
-               interrupts = <24>;
-               #interrupt-cells = <1>;
+               interrupts = <24 3>;
+
                phy-mode = "internal";
 
                fixed-link {
@@ -210,8 +154,9 @@
 
        switch0: switch@1b000000 {
                compatible = "realtek,rtl83xx-switch";
+               status = "okay";
 
                interrupt-parent = <&intc>;
-               interrupts = <20>;
+               interrupts = <23 2>;
        };
 };