All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B
Signed-off-by: John Audia <graysky@archlinux.us>
endif
LINUX_VERSION-5.4 = .158
-LINUX_VERSION-5.10 = .77
+LINUX_VERSION-5.10 = .78
LINUX_KERNEL_HASH-5.4.158 = 6e018fecdc8fc24553756e582d83b82d65b10a6b03ef36262a24911f839b8d59
-LINUX_KERNEL_HASH-5.10.77 = d3b64edfc1dd7212e62ed733aeeb73d64ffd6d9658d322d44cddf1b41d5b8fc3
+LINUX_KERNEL_HASH-5.10.78 = be806c98e222ea581530727a8e83b0b96fcd678afd12944eb530e58776a6050f
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
-@@ -384,6 +384,11 @@ struct hc_driver {
+@@ -382,6 +382,11 @@ struct hc_driver {
* or bandwidth constraints.
*/
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
/* Returns the hardware-chosen device address */
int (*address_device)(struct usb_hcd *, struct usb_device *udev);
/* prepares the hardware to send commands to the device */
-@@ -445,6 +450,8 @@ extern void usb_hcd_unmap_urb_setup_for_
+@@ -443,6 +448,8 @@ extern void usb_hcd_unmap_urb_setup_for_
extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
-@@ -1468,6 +1468,103 @@ command_cleanup:
+@@ -1467,6 +1467,103 @@ command_cleanup:
}
/*
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*/
-@@ -5367,6 +5464,7 @@ static const struct hc_driver xhci_hc_dr
+@@ -5366,6 +5463,7 @@ static const struct hc_driver xhci_hc_dr
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
break;
default:
switch (port) {
-@@ -1223,9 +1228,7 @@ static const u16 bcm_sf2_4908_reg_offset
+@@ -1227,9 +1232,7 @@ static const u16 bcm_sf2_4908_reg_offset
[REG_PHY_REVISION] = 0x14,
[REG_SPHY_CNTRL] = 0x24,
[REG_CROSSBAR] = 0xc8,
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1484,10 +1484,14 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1488,10 +1488,14 @@ static int bcm_sf2_sw_probe(struct platf
rev = reg_readl(priv, REG_PHY_REVISION);
priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1498,6 +1498,12 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1502,6 +1502,12 @@ static int bcm_sf2_sw_probe(struct platf
priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
priv->irq0, priv->irq1);
}
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
-@@ -2835,7 +2835,6 @@ static int lan743x_pcidev_probe(struct p
+@@ -2837,7 +2837,6 @@ static int lan743x_pcidev_probe(struct p
{
struct lan743x_adapter *adapter = NULL;
struct net_device *netdev = NULL;
int ret = -ENODEV;
netdev = devm_alloc_etherdev(&pdev->dev,
-@@ -2852,9 +2851,7 @@ static int lan743x_pcidev_probe(struct p
+@@ -2854,9 +2853,7 @@ static int lan743x_pcidev_probe(struct p
NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED;
netdev->max_mtu = LAN743X_MAX_FRAME_SIZE;
#endif /* __LINUX_USB_PCI_QUIRKS_H */
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
-@@ -486,7 +486,14 @@ extern int usb_hcd_pci_probe(struct pci_
+@@ -484,7 +484,14 @@ extern int usb_hcd_pci_probe(struct pci_
extern void usb_hcd_pci_remove(struct pci_dev *dev);
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);