ar71xx: fix swapped LAN/WAN MAC address for Archer C60 v1/v2

The MAC addresses for lan/wan are swapped compared to the vendor
firmware. This adjusts to vendor configuration, which is:

lan   *:7b   label
wan   *:7c   label+1
2.4g  *:7b   label
5g    *:7a   label-1

Only one address is stored in <&mac 0x8>, corresponding to the label.

This has been checked on revisions v1, v2 and v3.

Since ar71xx calculates the ath10k MAC address based on the ethernet
addresses, the number there is adjusted, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 14eb54938b525d4c2d2847a6fad7670ed944650c)

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 718fd7555c73c247cb662c0a8638895e2da38b84..8fb5be643c9c1372195bf10e3e45927c2f6a2a55 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -182,7 +182,7 @@ case "$FIRMWARE" in
                ath10kcal_extract "art" 20480 12064
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
                ;;
        cf-e385ac)
                ath10kcal_extract "art" 20480 12064

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
index 88f4f081a34db9b289d393d9c7ad4693ddb9b01d..a0839e6bcadd39b826d657141c5ba94fc5b2a729 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -157,8 +157,8 @@ static void __init archer_c60_v1_setup(void)
        ath79_register_mdio(0, 0x0);
        ath79_register_mdio(1, 0x0);
 
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
 
        /* WAN port */
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
@@ -199,8 +199,8 @@ static void __init archer_c60_v2_setup(void)
        ath79_register_mdio(0, 0x0);
        ath79_register_mdio(1, 0x0);
 
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
 
        /* WAN port */
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;