b53: support setting port link

When dealing with Broadcom hardware we can simply use swconfig's generic
helper, we just need to do some validation of requested state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48623

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
index 41b5ae96c390e2eefc92f42a07d35389f2e19704..676e301559b64db4ac5bbc6997083dc7279bf850 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
@@ -794,6 +794,34 @@ static int b53_port_get_link(struct switch_dev *dev, int port,
 
 }
 
+static int b53_port_set_link(struct switch_dev *sw_dev, int port,
+                            struct switch_port_link *link)
+{
+       struct b53_device *dev = sw_to_b53(sw_dev);
+
+       /*
+        * TODO: BCM63XX requires special handling as it can have external phys
+        * and ports might be GE or only FE
+        */
+       if (is63xx(dev))
+               return -ENOTSUPP;
+
+       if (port == sw_dev->cpu_port)
+               return -EINVAL;
+
+       if (!(BIT(port) & dev->enabled_ports))
+               return -EINVAL;
+
+       if (link->speed == SWITCH_PORT_SPEED_1000 &&
+           (is5325(dev) || is5365(dev)))
+               return -EINVAL;
+
+       if (link->speed == SWITCH_PORT_SPEED_1000 && !link->duplex)
+               return -EINVAL;
+
+       return switch_generic_set_link(sw_dev, port, link);
+}
+
 static int b53_phy_read16(struct switch_dev *dev, int addr, u8 reg, u16 *value)
 {
        struct b53_device *priv = sw_to_b53(dev);
@@ -1022,6 +1050,7 @@ static const struct switch_dev_ops b53_switch_ops_25 = {
        .apply_config = b53_global_apply_config,
        .reset_switch = b53_global_reset_switch,
        .get_port_link = b53_port_get_link,
+       .set_port_link = b53_port_set_link,
        .phy_read16 = b53_phy_read16,
        .phy_write16 = b53_phy_write16,
 };
@@ -1047,6 +1076,7 @@ static const struct switch_dev_ops b53_switch_ops_65 = {
        .apply_config = b53_global_apply_config,
        .reset_switch = b53_global_reset_switch,
        .get_port_link = b53_port_get_link,
+       .set_port_link = b53_port_set_link,
        .phy_read16 = b53_phy_read16,
        .phy_write16 = b53_phy_write16,
 };
@@ -1072,6 +1102,7 @@ static const struct switch_dev_ops b53_switch_ops = {
        .apply_config = b53_global_apply_config,
        .reset_switch = b53_global_reset_switch,
        .get_port_link = b53_port_get_link,
+       .set_port_link = b53_port_set_link,
        .phy_read16 = b53_phy_read16,
        .phy_write16 = b53_phy_write16,
 };