radxa_cm3-io
endef
+define U-Boot/rock-3c-rk3566
+ $(U-Boot/rk3566/Default)
+ NAME:=ROCK 3C
+ BUILD_DEVICES:= \
+ radxa_rock-3c
+endef
+
# RK3568 boards
define U-Boot/rk3568/Default
rock-pi-e-rk3328 \
rock-pi-e-v3-rk3328 \
radxa-cm3-io-rk3566 \
+ rock-3c-rk3566 \
bpi-r2-pro-rk3568 \
nanopi-r5c-rk3568 \
nanopi-r5s-rk3568 \
+&usb_host0_ohci {
+ status = "okay";
+};
+--- /dev/null
++++ b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
+@@ -0,0 +1,726 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++
++/ {
++ model = "Radxa ROCK 3C";
++ compatible = "radxa,rock-3c", "rockchip,rk3566";
++
++ aliases {
++ ethernet0 = &gmac1;
++ mmc0 = &sdhci;
++ mmc1 = &sdmmc0;
++ mmc2 = &sdmmc1;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ gmac1_clkin: external-gmac1-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "gmac1_clkin";
++ #clock-cells = <0>;
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++ function = LED_FUNCTION_HEARTBEAT;
++ color = <LED_COLOR_ID_BLUE>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&user_led2>;
++ };
++ };
++
++ sdio_pwrseq: sdio-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rk809 1>;
++ clock-names = "ext_clock";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_reg_on_h>;
++ post-power-on-delay-ms = <100>;
++ power-off-delay-us = <5000000>;
++ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
++ };
++
++ vcc5v_dcin: vcc5v-dcin-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v_dcin";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc3v3_pcie: vcc3v3-pcie-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_pwr_en>;
++ regulator-name = "vcc3v3_pcie";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ vcc3v3_sys: vcc3v3-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v_dcin>;
++ };
++
++ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb30_host_en>;
++ regulator-name = "vcc5v0_usb30_host";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_otg_en>;
++ regulator-name = "vcc5v0_usb_otg";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc_cam: vcc-cam-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc_cam_en>;
++ regulator-name = "vcc_cam";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_mipi: vcc-mipi-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc_mipi_en>;
++ regulator-name = "vcc_mipi";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&combphy2 {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gmac1 {
++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
++ clock_in_out = "input";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii-id";
++ phy-supply = <&vcc_3v3>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac1m1_miim
++ &gmac1m1_tx_bus2
++ &gmac1m1_rx_bus2
++ &gmac1m1_rgmii_clk
++ &gmac1m1_rgmii_bus
++ &gmac1m1_clkinout>;
++ status = "okay";
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1150000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk809: pmic@20 {
++ compatible = "rockchip,rk809";
++ reg = <0x20>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ clock-output-names = "rk808-clkout1", "rk808-clkout2";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
++ system-power-controller;
++ vcc1-supply = <&vcc3v3_sys>;
++ vcc2-supply = <&vcc3v3_sys>;
++ vcc3-supply = <&vcc3v3_sys>;
++ vcc4-supply = <&vcc3v3_sys>;
++ vcc5-supply = <&vcc3v3_sys>;
++ vcc6-supply = <&vcc3v3_sys>;
++ vcc7-supply = <&vcc3v3_sys>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc3v3_sys>;
++ wakeup-source;
++ #clock-cells = <1>;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vdd_gpu: DCDC_REG2 {
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vdd_npu: DCDC_REG4 {
++ regulator-name = "vdd_npu";
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8: DCDC_REG5 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_image: LDO_REG1 {
++ regulator-name = "vdda0v9_image";
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca_1v8: LDO_REG7 {
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG8 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcca1v8_image: LDO_REG9 {
++ regulator-name = "vcca1v8_image";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v3: SWITCH_REG1 {
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_sd: SWITCH_REG2 {
++ regulator-name = "vcc3v3_sd";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++
++ eeprom: eeprom@50 {
++ compatible = "belling,bl24c16a", "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++};
++
++&i2s0_8ch {
++ status = "okay";
++};
++
++&i2s1_8ch {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
++ rockchip,trcm-sync-tx-only;
++ status = "okay";
++};
++
++&mdio1 {
++ rgmii_phy1: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <0x1>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <100000>;
++ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_reset_h>;
++ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pinctrl {
++ bluetooth {
++ bt_reg_on_h: bt-reg-on-h {
++ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_wake_host_h: bt-wake-host-h {
++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_host_wake_h: bt-host-wake-h {
++ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ cam {
++ vcc_cam_en: vcc_cam_en {
++ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ display {
++ vcc_mipi_en: vcc_mipi_en {
++ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ leds {
++ user_led2: user-led2 {
++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pcie {
++ pcie_pwr_en: pcie-pwr-en {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie_reset_h: pcie-reset-h {
++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
++ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ wifi {
++ wifi_host_wake_h: wifi-host-wake-h {
++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wifi_reg_on_h: wifi-reg-on-h {
++ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcca1v8_pmu>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio2-supply = <&vcc_1v8>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcca1v8_pmu>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_3v3>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ mmc-hs200-1_8v;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++};
++
++&sdmmc0 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++ sd-uhs-sdr50;
++ vmmc-supply = <&vcc3v3_sys>;
++ vqmmc-supply = <&vccio_sd>;
++ status = "okay";
++};
++
++&sdmmc1 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ cap-sdio-irq;
++ keep-power-in-suspend;
++ mmc-pwrseq = <&sdio_pwrseq>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc3v3_sys>;
++ vqmmc-supply = <&vcca1v8_pmu>;
++ status = "okay";
++};
++
++&sfc {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0x0>;
++ spi-max-frequency = <104000000>;
++ spi-rx-bus-width = <4>;
++ spi-tx-bus-width = <1>;
++ };
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&usb2phy0_otg {
++ phy-supply = <&vcc5v0_usb_otg>;
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&usb2phy1_host {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From e6e82ce24d4e9d20c232db2a95b2d10faf8f2bcf Mon Sep 17 00:00:00 2001
+From: Maxim Moskalets <maximmosk4@gmail.com>
+Date: Thu, 8 Aug 2024 22:37:10 +0300
+Subject: [PATCH] board: rockchip: add Radxa ROCK 3 Model C
+
+Based on rock-3a-rk3568_defconfig.
+Tested on v1.31 revision.
+
+Board Specifications:
+- Rockchip RK3566
+- 1/2/4GB LPDDR4 2112MT/s
+- eMMC socket
+- uSD card slot
+- M.2 2230 Connector
+- GbE LAN with POE
+- 3.5mm jack with mic
+- HDMI 2.0, MIPI DSI/CSI
+- USB 3.0 Host, USB 2.0 Host/OTG
+- 40-pin GPIO expansion ports
+
+Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
+Suggested-by: Jonas Karlman <jonas@kwiboo.se>
+Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
+Tested-by: FUKAUMI Naoki <naoki@radxa.com>
+Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
+---
+ arch/arm/dts/rk3566-rock-3c-u-boot.dtsi | 18 +++++
+ board/rockchip/evb_rk3568/MAINTAINERS | 7 ++
+ configs/rock-3c-rk3566_defconfig | 97 +++++++++++++++++++++++++
+ doc/board/rockchip/rockchip.rst | 1 +
+ 4 files changed, 123 insertions(+)
+ create mode 100644 arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
+ create mode 100644 configs/rock-3c-rk3566_defconfig
+
+--- /dev/null
++++ b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
+@@ -0,0 +1,18 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include "rk356x-u-boot.dtsi"
++
++&sfc {
++ flash@0 {
++ bootph-pre-ram;
++ bootph-some-ram;
++ };
++};
++
++/ {
++ leds {
++ led-0 {
++ default-state = "on";
++ };
++ };
++};
+--- a/board/rockchip/evb_rk3568/MAINTAINERS
++++ b/board/rockchip/evb_rk3568/MAINTAINERS
+@@ -69,3 +69,10 @@ S: Maintained
+ F: configs/rock-3a-rk3568_defconfig
+ F: arch/arm/dts/rk3568-rock-3a.dts
+ F: arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
++
++ROCK-3C
++M: Jonas Karlman <jonas@kwiboo.se>
++M: Maxim Moskalets <maximmosk4@gmail.com>
++S: Maintained
++F: arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
++F: configs/rock-3c-rk3566_defconfig
+--- /dev/null
++++ b/configs/rock-3c-rk3566_defconfig
+@@ -0,0 +1,97 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_SF_DEFAULT_SPEED=24000000
++CONFIG_SF_DEFAULT_MODE=0x2000
++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
++CONFIG_ROCKCHIP_RK3568=y
++CONFIG_ROCKCHIP_SPI_IMAGE=y
++CONFIG_SPL_SERIAL=y
++CONFIG_DEBUG_UART_BASE=0xFE660000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_SPL_SPI=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_FIT_SIGNATURE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_LEGACY_IMAGE_FORMAT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-rock-3c.dtb"
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++CONFIG_SPL_MAX_SIZE=0x40000
++CONFIG_SPL_PAD_TO=0x7f8000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_SPL_SPI_LOAD=y
++CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
++CONFIG_SPL_ATF=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_POWEROFF=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_PMIC=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_OF_LIVE=y
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_SPL_REGMAP=y
++CONFIG_SPL_SYSCON=y
++CONFIG_SCSI_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SPL_CLK=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_MISC=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_SF_DEFAULT_BUS=4
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_PHY_REALTEK=y
++CONFIG_DWC_ETH_QOS=y
++CONFIG_DWC_ETH_QOS_ROCKCHIP=y
++CONFIG_NVME_PCI=y
++CONFIG_PCIE_DW_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_SPL_RAM=y
++CONFIG_SCSI=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_ROCKCHIP_SFC=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_ERRNO_STR=y
+--- a/doc/board/rockchip/rockchip.rst
++++ b/doc/board/rockchip/rockchip.rst
+@@ -106,6 +106,7 @@ List of mainline supported Rockchip boar
+ - Pine64 SOQuartz on Model A (soquartz-model-a-rk3566)
+ - Powkiddy X55 (powkiddy-x55-rk3566)
+ - Radxa CM3 IO Board (radxa-cm3-io-rk3566)
++ - Radxa ROCK 3C (rock-3c-rk3566)
+
+ * rk3568
+ - Rockchip Evb-RK3568 (evb-rk3568)
endef
TARGET_DEVICES += radxa_rock-3a
+define Device/radxa_rock-3c
+ DEVICE_VENDOR := Radxa
+ DEVICE_MODEL := ROCK 3C
+ SOC := rk3566
+ DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
+endef
+TARGET_DEVICES += radxa_rock-3c
+
define Device/radxa_rock-5a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5A
--- /dev/null
+From ee219017ddb50be14c60d3cbe3e51ac0b2008d40 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 28 Apr 2024 20:36:18 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa ROCK 3C
+
+The Radxa ROCK 3C is a development board with the
+Rockchip RK3566 SoC. It has the following features:
+
+- 1/2/4GB LPDDR4
+- 1x HDMI Type A
+- 1x PCIE 2.0 slot
+- 1x FAN connector
+- 3.5mm jack with mic
+- 1GbE RTL8211F Ethernet
+- 1x USB 3.0, 3x USB 2.0
+- 40-pin expansion header
+- MicroSD card/eMMC socket
+- 16MB SPI NOR (gd25lq128d)
+- AP6256 or AIC8800 WiFi/BT
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn
+[dropped rk809-sound and not specified pmic sound properties]
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3566-rock-3c.dts | 726 ++++++++++++++++++
+ 2 files changed, 727 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-qu
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+@@ -0,0 +1,726 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++
++/ {
++ model = "Radxa ROCK 3C";
++ compatible = "radxa,rock-3c", "rockchip,rk3566";
++
++ aliases {
++ ethernet0 = &gmac1;
++ mmc0 = &sdhci;
++ mmc1 = &sdmmc0;
++ mmc2 = &sdmmc1;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ gmac1_clkin: external-gmac1-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "gmac1_clkin";
++ #clock-cells = <0>;
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++ function = LED_FUNCTION_HEARTBEAT;
++ color = <LED_COLOR_ID_BLUE>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&user_led2>;
++ };
++ };
++
++ sdio_pwrseq: sdio-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rk809 1>;
++ clock-names = "ext_clock";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_reg_on_h>;
++ post-power-on-delay-ms = <100>;
++ power-off-delay-us = <5000000>;
++ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
++ };
++
++ vcc5v_dcin: vcc5v-dcin-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v_dcin";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc3v3_pcie: vcc3v3-pcie-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_pwr_en>;
++ regulator-name = "vcc3v3_pcie";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ vcc3v3_sys: vcc3v3-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v_dcin>;
++ };
++
++ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb30_host_en>;
++ regulator-name = "vcc5v0_usb30_host";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_otg_en>;
++ regulator-name = "vcc5v0_usb_otg";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc_cam: vcc-cam-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc_cam_en>;
++ regulator-name = "vcc_cam";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_mipi: vcc-mipi-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc_mipi_en>;
++ regulator-name = "vcc_mipi";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&combphy2 {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gmac1 {
++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
++ clock_in_out = "input";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii-id";
++ phy-supply = <&vcc_3v3>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac1m1_miim
++ &gmac1m1_tx_bus2
++ &gmac1m1_rx_bus2
++ &gmac1m1_rgmii_clk
++ &gmac1m1_rgmii_bus
++ &gmac1m1_clkinout>;
++ status = "okay";
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1150000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk809: pmic@20 {
++ compatible = "rockchip,rk809";
++ reg = <0x20>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ clock-output-names = "rk808-clkout1", "rk808-clkout2";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
++ system-power-controller;
++ vcc1-supply = <&vcc3v3_sys>;
++ vcc2-supply = <&vcc3v3_sys>;
++ vcc3-supply = <&vcc3v3_sys>;
++ vcc4-supply = <&vcc3v3_sys>;
++ vcc5-supply = <&vcc3v3_sys>;
++ vcc6-supply = <&vcc3v3_sys>;
++ vcc7-supply = <&vcc3v3_sys>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc3v3_sys>;
++ wakeup-source;
++ #clock-cells = <1>;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vdd_gpu: DCDC_REG2 {
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vdd_npu: DCDC_REG4 {
++ regulator-name = "vdd_npu";
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8: DCDC_REG5 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_image: LDO_REG1 {
++ regulator-name = "vdda0v9_image";
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca_1v8: LDO_REG7 {
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG8 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcca1v8_image: LDO_REG9 {
++ regulator-name = "vcca1v8_image";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v3: SWITCH_REG1 {
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_sd: SWITCH_REG2 {
++ regulator-name = "vcc3v3_sd";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++
++ eeprom: eeprom@50 {
++ compatible = "belling,bl24c16a", "atmel,24c16";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++};
++
++&i2s0_8ch {
++ status = "okay";
++};
++
++&i2s1_8ch {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
++ rockchip,trcm-sync-tx-only;
++ status = "okay";
++};
++
++&mdio1 {
++ rgmii_phy1: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <0x1>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <100000>;
++ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_reset_h>;
++ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pinctrl {
++ bluetooth {
++ bt_reg_on_h: bt-reg-on-h {
++ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_wake_host_h: bt-wake-host-h {
++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_host_wake_h: bt-host-wake-h {
++ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ cam {
++ vcc_cam_en: vcc_cam_en {
++ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ display {
++ vcc_mipi_en: vcc_mipi_en {
++ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ leds {
++ user_led2: user-led2 {
++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pcie {
++ pcie_pwr_en: pcie-pwr-en {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie_reset_h: pcie-reset-h {
++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
++ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ wifi {
++ wifi_host_wake_h: wifi-host-wake-h {
++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wifi_reg_on_h: wifi-reg-on-h {
++ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcca1v8_pmu>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio2-supply = <&vcc_1v8>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcca1v8_pmu>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_3v3>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ mmc-hs200-1_8v;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++};
++
++&sdmmc0 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++ sd-uhs-sdr50;
++ vmmc-supply = <&vcc3v3_sys>;
++ vqmmc-supply = <&vccio_sd>;
++ status = "okay";
++};
++
++&sdmmc1 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ cap-sdio-irq;
++ keep-power-in-suspend;
++ mmc-pwrseq = <&sdio_pwrseq>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc3v3_sys>;
++ vqmmc-supply = <&vcca1v8_pmu>;
++ status = "okay";
++};
++
++&sfc {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0x0>;
++ spi-max-frequency = <120000000>;
++ spi-rx-bus-width = <4>;
++ spi-tx-bus-width = <1>;
++ };
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&usb2phy0_otg {
++ phy-supply = <&vcc5v0_usb_otg>;
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&usb2phy1_host {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ phy-supply = <&vcc5v0_usb30_host>;
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From 06f6dd4d607766a527e37529f2f3f90dd1464293 Mon Sep 17 00:00:00 2001
+From: FUKAUMI Naoki <naoki@radxa.com>
+Date: Sun, 23 Jun 2024 11:33:29 +0900
+Subject: [PATCH] arm64: dts: rockchip: change spi-max-frequency for Radxa ROCK
+ 3C
+
+SPI NOR flash chip may vary, so use safe(lowest) spi-max-frequency.
+
+Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
+Link: https://lore.kernel.org/r/20240623023329.1044-3-naoki@radxa.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+@@ -633,7 +633,7 @@
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+- spi-max-frequency = <120000000>;
++ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -104,4 +104,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
+@@ -105,4 +105,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
--- /dev/null
+--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+@@ -16,6 +16,10 @@
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
++ led-boot = &led_blue;
++ led-failsafe = &led_blue;
++ led-running = &led_blue;
++ led-upgrade = &led_blue;
+ };
+
+ chosen: chosen {
+@@ -43,11 +47,11 @@
+ leds {
+ compatible = "gpio-leds";
+
+- led-0 {
+- gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+- function = LED_FUNCTION_HEARTBEAT;
++ led_blue: led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+- linux,default-trigger = "heartbeat";
++ default-state = "on";
++ function = LED_FUNCTION_HEARTBEAT;
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led2>;
+ };
projects / openwrt / staging / blocktrron.git / commitdiff