* Driver for simulating a mouse on GPIO lines.
*
* Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
-#include <linux/gpio.h>
-
-#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
-#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
-
-#define GPIO_MOUSE_PIN_UP 0
-#define GPIO_MOUSE_PIN_DOWN 1
-#define GPIO_MOUSE_PIN_LEFT 2
-#define GPIO_MOUSE_PIN_RIGHT 3
-#define GPIO_MOUSE_PIN_BLEFT 4
-#define GPIO_MOUSE_PIN_BMIDDLE 5
-#define GPIO_MOUSE_PIN_BRIGHT 6
-#define GPIO_MOUSE_PIN_MAX 7
+#include <linux/gpio/consumer.h>
+#include <linux/property.h>
/**
* struct gpio_mouse
- * @scan_ms: integer in ms specifying the scan periode.
- * @polarity: Pin polarity, active high or low.
+ * @scan_ms: the scan interval in milliseconds.
* @up: GPIO line for up value.
* @down: GPIO line for down value.
* @left: GPIO line for left value.
* @bleft: GPIO line for left button.
* @bmiddle: GPIO line for middle button.
* @bright: GPIO line for right button.
- * @pins: GPIO line numbers used for the mouse.
*
* This struct must be added to the platform_device in the board code.
* It is used by the gpio_mouse driver to setup GPIO lines and to
* calculate mouse movement.
*/
struct gpio_mouse {
- int scan_ms;
- int polarity;
-
- union {
- struct {
- int up;
- int down;
- int left;
- int right;
-
- int bleft;
- int bmiddle;
- int bright;
- };
- int pins[GPIO_MOUSE_PIN_MAX];
- };
+ u32 scan_ms;
+ struct gpio_desc *up;
+ struct gpio_desc *down;
+ struct gpio_desc *left;
+ struct gpio_desc *right;
+ struct gpio_desc *bleft;
+ struct gpio_desc *bmiddle;
+ struct gpio_desc *bright;
};
/*
struct input_dev *input = dev->input;
int x, y;
- if (gpio->bleft >= 0)
+ if (gpio->bleft)
input_report_key(input, BTN_LEFT,
- gpio_get_value(gpio->bleft) ^ gpio->polarity);
- if (gpio->bmiddle >= 0)
+ gpiod_get_value(gpio->bleft));
+ if (gpio->bmiddle)
input_report_key(input, BTN_MIDDLE,
- gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
- if (gpio->bright >= 0)
+ gpiod_get_value(gpio->bmiddle));
+ if (gpio->bright)
input_report_key(input, BTN_RIGHT,
- gpio_get_value(gpio->bright) ^ gpio->polarity);
+ gpiod_get_value(gpio->bright));
- x = (gpio_get_value(gpio->right) ^ gpio->polarity)
- - (gpio_get_value(gpio->left) ^ gpio->polarity);
- y = (gpio_get_value(gpio->down) ^ gpio->polarity)
- - (gpio_get_value(gpio->up) ^ gpio->polarity);
+ x = gpiod_get_value(gpio->right) - gpiod_get_value(gpio->left);
+ y = gpiod_get_value(gpio->down) - gpiod_get_value(gpio->up);
input_report_rel(input, REL_X, x);
input_report_rel(input, REL_Y, y);
struct gpio_mouse *gmouse;
struct input_polled_dev *input_poll;
struct input_dev *input;
- int pin, i;
- int error;
+ int ret;
gmouse = devm_kzalloc(dev, sizeof(*gmouse), GFP_KERNEL);
if (!gmouse)
return -ENOMEM;
- if (gmouse->scan_ms < 0) {
- dev_err(&pdev->dev, "invalid scan time\n");
- error = -EINVAL;
- goto out;
+ /* Assign some default scanning time */
+ ret = device_property_read_u32(dev, "scan-interval-ms",
+ &gmouse->scan_ms);
+ if (ret || gmouse->scan_ms == 0) {
+ dev_warn(dev, "invalid scan time, set to 50 ms\n");
+ gmouse->scan_ms = 50;
}
- for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
- pin = gmouse->pins[i];
-
- if (pin < 0) {
-
- if (i <= GPIO_MOUSE_PIN_RIGHT) {
- /* Mouse direction is required. */
- dev_err(&pdev->dev,
- "missing GPIO for directions\n");
- error = -EINVAL;
- goto out_free_gpios;
- }
-
- if (i == GPIO_MOUSE_PIN_BLEFT)
- dev_dbg(&pdev->dev, "no left button defined\n");
-
- } else {
- error = gpio_request(pin, "gpio_mouse");
- if (error) {
- dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
- pin, i);
- goto out_free_gpios;
- }
-
- gpio_direction_input(pin);
- }
- }
-
- input_poll = input_allocate_polled_device();
+ gmouse->up = devm_gpiod_get(dev, "up", GPIOD_IN);
+ if (IS_ERR(gmouse->up))
+ return PTR_ERR(gmouse->up);
+ gmouse->down = devm_gpiod_get(dev, "down", GPIOD_IN);
+ if (IS_ERR(gmouse->down))
+ return PTR_ERR(gmouse->down);
+ gmouse->left = devm_gpiod_get(dev, "left", GPIOD_IN);
+ if (IS_ERR(gmouse->left))
+ return PTR_ERR(gmouse->left);
+ gmouse->right = devm_gpiod_get(dev, "right", GPIOD_IN);
+ if (IS_ERR(gmouse->right))
+ return PTR_ERR(gmouse->right);
+
+ gmouse->bleft = devm_gpiod_get_optional(dev, "button-left", GPIOD_IN);
+ if (IS_ERR(gmouse->bleft))
+ return PTR_ERR(gmouse->bleft);
+ gmouse->bmiddle = devm_gpiod_get_optional(dev, "button-middle",
+ GPIOD_IN);
+ if (IS_ERR(gmouse->bmiddle))
+ return PTR_ERR(gmouse->bmiddle);
+ gmouse->bright = devm_gpiod_get_optional(dev, "button-right",
+ GPIOD_IN);
+ if (IS_ERR(gmouse->bright))
+ return PTR_ERR(gmouse->bright);
+
+ input_poll = devm_input_allocate_polled_device(dev);
if (!input_poll) {
- dev_err(&pdev->dev, "not enough memory for input device\n");
- error = -ENOMEM;
- goto out_free_gpios;
+ dev_err(dev, "not enough memory for input device\n");
+ return -ENOMEM;
}
platform_set_drvdata(pdev, input_poll);
input_set_capability(input, EV_REL, REL_X);
input_set_capability(input, EV_REL, REL_Y);
- if (gmouse->bleft >= 0)
+ if (gmouse->bleft)
input_set_capability(input, EV_KEY, BTN_LEFT);
- if (gmouse->bmiddle >= 0)
+ if (gmouse->bmiddle)
input_set_capability(input, EV_KEY, BTN_MIDDLE);
- if (gmouse->bright >= 0)
+ if (gmouse->bright)
input_set_capability(input, EV_KEY, BTN_RIGHT);
- error = input_register_polled_device(input_poll);
- if (error) {
- dev_err(&pdev->dev, "could not register input device\n");
- goto out_free_polldev;
- }
-
- dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
- gmouse->scan_ms,
- gmouse->bleft < 0 ? "" : "left ",
- gmouse->bmiddle < 0 ? "" : "middle ",
- gmouse->bright < 0 ? "" : "right");
-
- return 0;
-
- out_free_polldev:
- input_free_polled_device(input_poll);
-
- out_free_gpios:
- while (--i >= 0) {
- pin = gmouse->pins[i];
- if (pin)
- gpio_free(pin);
+ ret = input_register_polled_device(input_poll);
+ if (ret) {
+ dev_err(dev, "could not register input device\n");
+ return ret;
}
- out:
- return error;
-}
-static int gpio_mouse_remove(struct platform_device *pdev)
-{
- struct input_polled_dev *input = platform_get_drvdata(pdev);
- struct gpio_mouse *gmouse = input->private;
- int pin, i;
-
- input_unregister_polled_device(input);
- input_free_polled_device(input);
-
- for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
- pin = gmouse->pins[i];
- if (pin >= 0)
- gpio_free(pin);
- }
+ dev_dbg(dev, "%d ms scan time, buttons: %s%s%s\n",
+ gmouse->scan_ms,
+ gmouse->bleft ? "" : "left ",
+ gmouse->bmiddle ? "" : "middle ",
+ gmouse->bright ? "" : "right");
return 0;
}
static struct platform_driver gpio_mouse_device_driver = {
.probe = gpio_mouse_probe,
- .remove = gpio_mouse_remove,
.driver = {
.name = "gpio_mouse",
}
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
-
projects / openwrt / staging / blogic.git / commitdiff