--- /dev/null
+From: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+Date: Thu, 6 Nov 2014 10:52:23 +0530
+Subject: [PATCH] ath9k: Fix RTC_DERIVED_CLK usage
+
+Based on the reference clock, which could be 25MHz or 40MHz,
+AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550.
+But, when a chip reset is done, processing the initvals
+sets the register back to the default value.
+
+Fix this by moving the code in ath9k_hw_init_pll() to
+ar9003_hw_override_ini(). Also, do this override for AR9531.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+@@ -664,6 +664,19 @@ static void ar9003_hw_override_ini(struc
+ ah->enabled_cals |= TX_CL_CAL;
+ else
+ ah->enabled_cals &= ~TX_CL_CAL;
++
++ if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
++ if (ah->is_clk_25mhz) {
++ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
++ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
++ REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
++ } else {
++ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
++ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
++ REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
++ }
++ udelay(100);
++ }
+ }
+
+ static void ar9003_hw_prog_ini(struct ath_hw *ah,
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -870,19 +870,6 @@ static void ath9k_hw_init_pll(struct ath
+ udelay(RTC_PLL_SETTLE_DELAY);
+
+ REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
+-
+- if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+- if (ah->is_clk_25mhz) {
+- REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+- REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+- } else {
+- REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+- REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+- }
+- udelay(100);
+- }
+ }
+
+ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
--- /dev/null
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 5 Nov 2014 23:31:07 +0100
+Subject: [PATCH] b43: fix NULL pointer dereference in b43_phy_copy()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+phy_read and phy_write are not set for every phy any more sine this:
+commit d342b95dd735014a590f9051b1ba227eb54ca8f6
+Author: Rafał Miłecki <zajec5@gmail.com>
+Date: Thu Jul 31 21:59:43 2014 +0200
+
+ b43: don't duplicate common PHY read/write ops
+
+b43_phy_copy() accesses phy_read and phy_write directly and will fail
+with some phys. This patch fixes the regression by using the
+b43_phy_read() and b43_phy_write() functions which should be used for
+read and write access.
+
+This should fix this bug report:
+https://bugzilla.kernel.org/show_bug.cgi?id=87731
+
+Reported-by: Volker Kempter <v.kempter@pe.tu-clausthal.de>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+
+--- a/drivers/net/wireless/b43/phy_common.c
++++ b/drivers/net/wireless/b43/phy_common.c
+@@ -301,8 +301,7 @@ void b43_phy_write(struct b43_wldev *dev
+ void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
+ {
+ assert_mac_suspended(dev);
+- dev->phy.ops->phy_write(dev, destreg,
+- dev->phy.ops->phy_read(dev, srcreg));
++ b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
+ }
+
+ void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
--- /dev/null
+From: Ben Greear <greearb@candelatech.com>
+Date: Tue, 4 Nov 2014 15:22:49 -0800
+Subject: [PATCH] ath9k: fix misc debugfs when not using chan context
+
+When channel-context is not enabled, all vifs belong to
+the first context, but it is not configured as 'assigned'.
+
+Fix misc debugfs file to print out info for non-assigned
+contexts, and also print whether ctx is assigned or not.
+
+Signed-off-by: Ben Greear <greearb@candelatech.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/debug.c
++++ b/drivers/net/wireless/ath/ath9k/debug.c
+@@ -828,13 +828,14 @@ static ssize_t read_file_misc(struct fil
+
+ i = 0;
+ ath_for_each_chanctx(sc, ctx) {
+- if (!ctx->assigned || list_empty(&ctx->vifs))
++ if (list_empty(&ctx->vifs))
+ continue;
+ ath9k_calculate_iter_data(sc, ctx, &iter_data);
+
+ len += scnprintf(buf + len, sizeof(buf) - len,
+- "VIF-COUNTS: CTX %i AP: %i STA: %i MESH: %i WDS: %i",
+- i++, iter_data.naps, iter_data.nstations,
++ "VIFS: CTX %i(%i) AP: %i STA: %i MESH: %i WDS: %i",
++ i++, (int)(ctx->assigned), iter_data.naps,
++ iter_data.nstations,
+ iter_data.nmeshes, iter_data.nwds);
+ len += scnprintf(buf + len, sizeof(buf) - len,
+ " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n",
--- /dev/null
+From: Ben Greear <greearb@candelatech.com>
+Date: Tue, 4 Nov 2014 15:22:50 -0800
+Subject: [PATCH] ath9k: fix regression in bssidmask calculation
+
+The commit that went into 3.17:
+
+ ath9k: Summarize hw state per channel context
+
+ Group and set hw state (opmode, primary_sta, beacon conf) per
+ channel context instead of whole list of vifs. This would allow
+ each channel context to run in different mode (STA/AP).
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+ Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+ Signed-off-by: John W. Linville <linville@tuxdriver.com>
+
+broke multi-vif configuration due to not properly calculating
+the bssid mask.
+
+The test case that caught this was:
+
+ create wlan0 and sta0-4 (6 total), not sure how much that matters.
+ associate all 6 (works fine)
+ disconnect 5 of them, leaving sta0 up
+ Start trying to bring up the other 5 one at a time. It will
+ fail, with iw events looking like this (in these logs, several
+ sta are trying to come up, but symptom is the same with just one)
+
+The patch causing the regression made quite a few changes, but
+the part I think caused this particular problem was not
+recalculating the bssid mask when adding and removing interfaces.
+
+Re-adding those calls fixes my test case. Fix bad comment
+as well.
+
+Signed-off-by: Ben Greear <greearb@candelatech.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -994,9 +994,8 @@ void ath9k_calculate_iter_data(struct at
+ struct ath_vif *avp;
+
+ /*
+- * Pick the MAC address of the first interface as the new hardware
+- * MAC address. The hardware will use it together with the BSSID mask
+- * when matching addresses.
++ * The hardware will use primary station addr together with the
++ * BSSID mask when matching addresses.
+ */
+ memset(iter_data, 0, sizeof(*iter_data));
+ memset(&iter_data->mask, 0xff, ETH_ALEN);
+@@ -1225,6 +1224,8 @@ static int ath9k_add_interface(struct ie
+ list_add_tail(&avp->list, &avp->chanctx->vifs);
+ }
+
++ ath9k_calculate_summary_state(sc, avp->chanctx);
++
+ ath9k_assign_hw_queues(hw, vif);
+
+ an->sc = sc;
+@@ -1294,6 +1295,8 @@ static void ath9k_remove_interface(struc
+
+ ath_tx_node_cleanup(sc, &avp->mcast_node);
+
++ ath9k_calculate_summary_state(sc, avp->chanctx);
++
+ mutex_unlock(&sc->mutex);
+ }
+
--- /dev/null
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Mon, 3 Nov 2014 14:29:09 +0100
+Subject: [PATCH] mac80211: fix use-after-free in defragmentation
+
+Upon receiving the last fragment, all but the first fragment
+are freed, but the multicast check for statistics at the end
+of the function refers to the current skb (the last fragment)
+causing a use-after-free bug.
+
+Since multicast frames cannot be fragmented and we check for
+this early in the function, just modify that check to also
+do the accounting to fix the issue.
+
+Cc: stable@vger.kernel.org
+Reported-by: Yosef Khyal <yosefx.khyal@intel.com>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -1678,11 +1678,14 @@ ieee80211_rx_h_defragment(struct ieee802
+ sc = le16_to_cpu(hdr->seq_ctrl);
+ frag = sc & IEEE80211_SCTL_FRAG;
+
+- if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
+- is_multicast_ether_addr(hdr->addr1))) {
+- /* not fragmented */
++ if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
++ goto out;
++
++ if (is_multicast_ether_addr(hdr->addr1)) {
++ rx->local->dot11MulticastReceivedFrameCount++;
+ goto out;
+ }
++
+ I802_DEBUG_INC(rx->local->rx_handlers_fragments);
+
+ if (skb_linearize(rx->skb))
+@@ -1775,10 +1778,7 @@ ieee80211_rx_h_defragment(struct ieee802
+ out:
+ if (rx->sta)
+ rx->sta->rx_packets++;
+- if (is_multicast_ether_addr(hdr->addr1))
+- rx->local->dot11MulticastReceivedFrameCount++;
+- else
+- ieee80211_led_rx(rx->local);
++ ieee80211_led_rx(rx->local);
+ return RX_CONTINUE;
+ }
+
--- /dev/null
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Sun, 2 Nov 2014 13:38:47 +0100
+Subject: [PATCH] rt2x00: do not align payload on modern H/W
+
+RT2800 and newer hardware require padding between header and payload if
+header length is not multiple of 4.
+
+For historical reasons we also align payload to to 4 bytes boundary, but
+such alignment is not needed on modern H/W.
+
+Patch improve performance on embedded CPUs and _possibly_ fixes
+skb_under_panic problems reported from time to time:
+
+https://bugzilla.kernel.org/show_bug.cgi?id=84911
+https://bugzilla.kernel.org/show_bug.cgi?id=72471
+http://marc.info/?l=linux-wireless&m=139108549530402&w=2
+https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591
+
+But we can not explain or otherwise confirm the patch fixes this panic
+issue for sure.
+
+Originally-From: Helmut Schaa <helmut.schaa@googlemail.com>
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+---
+
+--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
+@@ -158,55 +158,29 @@ void rt2x00queue_align_frame(struct sk_b
+ skb_trim(skb, frame_length);
+ }
+
+-void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
++/*
++ * H/W needs L2 padding between the header and the paylod if header size
++ * is not 4 bytes aligned.
++ */
++void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len)
+ {
+- unsigned int payload_length = skb->len - header_length;
+- unsigned int header_align = ALIGN_SIZE(skb, 0);
+- unsigned int payload_align = ALIGN_SIZE(skb, header_length);
+- unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
++ unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
+
+- /*
+- * Adjust the header alignment if the payload needs to be moved more
+- * than the header.
+- */
+- if (payload_align > header_align)
+- header_align += 4;
+-
+- /* There is nothing to do if no alignment is needed */
+- if (!header_align)
++ if (!l2pad)
+ return;
+
+- /* Reserve the amount of space needed in front of the frame */
+- skb_push(skb, header_align);
+-
+- /*
+- * Move the header.
+- */
+- memmove(skb->data, skb->data + header_align, header_length);
+-
+- /* Move the payload, if present and if required */
+- if (payload_length && payload_align)
+- memmove(skb->data + header_length + l2pad,
+- skb->data + header_length + l2pad + payload_align,
+- payload_length);
+-
+- /* Trim the skb to the correct size */
+- skb_trim(skb, header_length + l2pad + payload_length);
++ skb_push(skb, l2pad);
++ memmove(skb->data, skb->data + l2pad, hdr_len);
+ }
+
+-void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
++void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len)
+ {
+- /*
+- * L2 padding is only present if the skb contains more than just the
+- * IEEE 802.11 header.
+- */
+- unsigned int l2pad = (skb->len > header_length) ?
+- L2PAD_SIZE(header_length) : 0;
++ unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
+
+ if (!l2pad)
+ return;
+
+- memmove(skb->data + l2pad, skb->data, header_length);
++ memmove(skb->data + l2pad, skb->data, hdr_len);
+ skb_pull(skb, l2pad);
+ }
+
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1313,6 +1313,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1314,6 +1314,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_spectral_deinit_debug(sc);
}
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1332,6 +1379,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1333,6 +1380,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_spectral_init_debug(sc);
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1360,6 +1360,52 @@ static const struct file_operations fops
+@@ -1361,6 +1361,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1381,6 +1427,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1382,6 +1428,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);
#endif
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1405,6 +1405,61 @@ static const struct file_operations fops
+@@ -1406,6 +1406,61 @@ static const struct file_operations fops
.llseek = default_llseek,
};
int ath9k_init_debug(struct ath_hw *ah)
{
-@@ -1429,6 +1484,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1430,6 +1485,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_eeprom);
debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_chanbw);
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1461,6 +1461,50 @@ static const struct file_operations fops
+@@ -1462,6 +1462,50 @@ static const struct file_operations fops
#endif
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1488,6 +1532,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1489,6 +1533,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("gpio_led", S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_gpio_led);
#endif
struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1766,6 +1766,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1753,6 +1753,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
}
EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata, bool fastcc)
{
-@@ -1970,6 +1984,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1957,6 +1971,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ar9003_hw_disable_phy_restart(ah);
ath9k_hw_apply_gpio_override(ah);
void (*spectral_scan_trigger)(struct ath_hw *ah);
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-@@ -1783,6 +1783,26 @@ static void ar9003_hw_tx99_set_txpower(s
+@@ -1796,6 +1796,26 @@ static void ar9003_hw_tx99_set_txpower(s
ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_14], 0));
}
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-@@ -1818,6 +1838,7 @@ void ar9003_hw_attach_phy_ops(struct ath
+@@ -1831,6 +1851,7 @@ void ar9003_hw_attach_phy_ops(struct ath
priv_ops->set_radar_params = ar9003_hw_set_radar_params;
priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
/******************/
/* Chip Revisions */
/******************/
-@@ -1351,6 +1364,9 @@ static bool ath9k_hw_set_reset(struct at
+@@ -1338,6 +1351,9 @@ static bool ath9k_hw_set_reset(struct at
if (AR_SREV_9100(ah))
udelay(50);
return true;
}
-@@ -1450,6 +1466,9 @@ static bool ath9k_hw_chip_reset(struct a
+@@ -1437,6 +1453,9 @@ static bool ath9k_hw_chip_reset(struct a
ar9003_hw_internal_regulator_apply(ah);
ath9k_hw_init_pll(ah, chan);
return true;
}
-@@ -1744,8 +1763,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1731,8 +1750,14 @@ static int ath9k_hw_do_fastcc(struct ath
if (AR_SREV_9271(ah))
ar9002_hw_load_ani_reg(ah, chan);
return -EINVAL;
}
-@@ -1995,6 +2020,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1982,6 +2007,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_set_radar_params(ah);
}
/**
* ar9003_hw_set_channel - set channel on single-chip device
* @ah: atheros hardware structure
-@@ -971,11 +957,6 @@ static bool ar9003_hw_ani_control(struct
+@@ -984,11 +970,6 @@ static bool ar9003_hw_ani_control(struct
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_channel *chan = ah->curchan;
struct ar5416AniState *aniState = &ah->ani;
s32 value, value2;
switch (cmd & ah->ani_function) {
-@@ -989,61 +970,6 @@ static bool ar9003_hw_ani_control(struct
+@@ -1002,61 +983,6 @@ static bool ar9003_hw_ani_control(struct
*/
u32 on = param ? 1 : 0;
+++ /dev/null
-[RFC] rt2x00: For drivers that only need L2 padding don't realign frames
-
-Signed-off-by: Helmut Schaa <helmut.schaa@...>
----
-
-Ivo, Gertjan, do you remeber by any chance why this alignment stuff was added
-in the first place? Was it because of DMA restrictions?
-
-While doing some profiling on the rt3052 SoC I noticed that 30-40% time was
-spent in memmove calls. And the culprit is the memmove aligning the payload
-to a 4byte boundary since that has to move a whole bunch of data.
-
-Interesstingly the legacy drivers insert an l2pad between the header and the
-payload but doesn't realign the payload itself to a 4-byte boundary. Hence,
-I came up with this patch and indeed CPU usage improves impressively.
-
-Only tested on rt2800pci!
-
-Thanks,
-Helmut
-
- drivers/net/wireless/rt2x00/rt2x00queue.c | 30 +++-------------------------
- 1 files changed, 4 insertions(+), 26 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -161,36 +161,14 @@ void rt2x00queue_align_frame(struct sk_b
- void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
- {
- unsigned int payload_length = skb->len - header_length;
-- unsigned int header_align = ALIGN_SIZE(skb, 0);
-- unsigned int payload_align = ALIGN_SIZE(skb, header_length);
- unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
-
-- /*
-- * Adjust the header alignment if the payload needs to be moved more
-- * than the header.
-- */
-- if (payload_align > header_align)
-- header_align += 4;
--
-- /* There is nothing to do if no alignment is needed */
-- if (!header_align)
-+ if (!l2pad)
- return;
-
-- /* Reserve the amount of space needed in front of the frame */
-- skb_push(skb, header_align);
--
-- /*
-- * Move the header.
-- */
-- memmove(skb->data, skb->data + header_align, header_length);
--
-- /* Move the payload, if present and if required */
-- if (payload_length && payload_align)
-- memmove(skb->data + header_length + l2pad,
-- skb->data + header_length + l2pad + payload_align,
-- payload_length);
--
-- /* Trim the skb to the correct size */
-+ /* insert l2pad -> Move header */
-+ skb_push(skb, l2pad);
-+ memmove(skb->data, skb->data + l2pad, header_length);
- skb_trim(skb, header_length + l2pad + payload_length);
- }
-
projects / openwrt / staging / wigyori.git / commitdiff