+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7240.dtsi"
-
-/ {
- compatible = "tplink,tl-wr740n-v2", "qca,ar7240";
- model = "TP-Link TL-WR740N v2";
-
- aliases {
- led-status = &led_system;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&switch_led_pins>;
-
- led_system: system {
- label = "tl-wr740n-v2:green:system";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "tl-wr740n-v2:green:lan1";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "tl-wr740n-v2:green:lan2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "tl-wr740n-v2:green:lan3";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "tl-wr740n-v2:green:lan4";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "tl-wr740n-v2:green:wan";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "tl-wr740n-v2:green:wlan";
- gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- wps {
- label = "tl-wr740n-v2:green:wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- firmware: partition@20000 {
- reg = <0x20000 0x3d0000>;
- label = "firmware";
- };
-
- art: partition@3f0000 {
- reg = <0x3f0000 0x10000>;
- label = "art";
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi@168c,002b {
- compatible = "pci168c,002b";
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- mtd-mac-address = <&uboot 0x1fc00>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&pinmux {
- switch_led_pins: pinmux_switch_led_pins {
- pinctrl-single,bits = <0x0 0x0 0xf8>;
- };
-};
-
-&uart {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7240.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr740n-v2", "qca,ar7240";
+ model = "TP-Link TL-WR740N v2";
+
+ aliases {
+ led-status = &led_system;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_pins>;
+
+ led_system: system {
+ label = "tl-wr740n-v2:green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tl-wr740n-v2:green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "tl-wr740n-v2:green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "tl-wr740n-v2:green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "tl-wr740n-v2:green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "tl-wr740n-v2:green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr740n-v2:green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "tl-wr740n-v2:green:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@168c,002b {
+ compatible = "pci168c,002b";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ switch_led_pins: pinmux_switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_tl-mr3x20.dtsi"
-
-/ {
- compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
- model = "TP-Link TL-MR3220 v1";
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_tl-mr3x20.dtsi"
-
-/ {
- compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
- model = "TP-Link TL-MR3420 v1";
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar7241_tp-link.dtsi"
-
-/ {
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb_power {
- gpio-export,name = "tp-link:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio_leds {
- led3g {
- label = "tp-link:green:3g";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
-};
-
-&usb {
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_tp-link.dtsi"
-
-/ {
- compatible = "tplink,tl-wr841-v7", "qca,ar7241";
- model = "TP-LINK TL-WR841N/ND v7";
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
- aliases {
- led-status = &led_system;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- qss {
- label = "qss";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio_leds: gpio-leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x3d0000>;
- label = "firmware";
- };
-
- partition@3f0000 {
- reg = <0x3f0000 0x10000>;
- label = "art";
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi@0 {
- reg = <0x0000 0 0 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- qca,no-eeprom;
- mtd-mac-address = <&uboot 0x1fc00>;
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
-};
-
-&gpio {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7241.dtsi"
+
+/ {
+ aliases {
+ led-status = &led_system;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ qss {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_tplink_tl-mr3x20.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
+ model = "TP-Link TL-MR3220 v1";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_tplink_tl-mr3x20.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
+ model = "TP-Link TL-MR3420 v1";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_tplink.dtsi"
+
+/ {
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio_leds {
+ led3g {
+ label = "tp-link:green:3g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb {
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7241_tplink.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v7", "qca,ar7241";
+ model = "TP-LINK TL-WR841N/ND v7";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7242.dtsi"
-
-/ {
- compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
- model = "TP-LINK TL-WR2543N/ND";
-
- aliases {
- led-status = &system;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- system: wps {
- label = "tplink:green:wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- usb {
- label = "tplink:green:usb";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan2g {
- label = "tplink:green:wlan2g";
- gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "tplink:green:wlan5g";
- gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- };
-
- rtl8367 {
- compatible = "realtek,rtl8367";
- gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
- realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
- };
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x7d0000>;
- };
-
- partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi@0 {
- reg = <0x0000 0 0 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- qca,no-eeprom;
- mtd-mac-address = <&uboot 0x1fc00>;
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-mode = "rgmii";
- mtd-mac-address = <&uboot 0x1fc00>;
-
- phy-handle = <&phy0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7242.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
+ model = "TP-LINK TL-WR2543N/ND";
+
+ aliases {
+ led-status = &system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system: wps {
+ label = "tplink:green:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ usb {
+ label = "tplink:green:usb";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "tplink:green:wlan2g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "tplink:green:wlan5g";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9132.dtsi"
-
-/ {
- compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
- model = "TP-Link TL-WR1043ND Version 1";
-
- aliases {
- led-status = &system;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- button1 {
- label = "qss";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- usb {
- label = "tp-link:green:usb";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
-
- system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-
- rtl8366rb {
- compatible = "realtek,rtl8366rb";
- gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
-
- resets = <&rst 8>;
- reset-names = "switch";
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&usb {
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x7D0000>;
- };
-
- art: partition@7F0000 {
- label = "art";
- reg = <0x7F0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-mode = "rgmii";
- mtd-mac-address = <&uboot 0x1fc00>;
-
- resets = <&rst 9>;
- reset-names = "mac";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+ model = "TP-Link TL-WR1043ND Version 1";
+
+ aliases {
+ led-status = &system;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button1 {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ usb {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
+
+ resets = <&rst 8>;
+ reset-names = "switch";
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&usb {
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x7D0000>;
+ };
+
+ art: partition@7F0000 {
+ label = "art";
+ reg = <0x7F0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "DPTechnics DPT-Module";
- compatible = "dptechnics,dpt-module", "qca,ar9331";
-
- aliases {
- serial0 = &uart;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "dpt-module:green:system";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Winbond 25Q128FVSG SPI flash */
- spiflash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "DPTechnics DPT-Module";
+ compatible = "dptechnics,dpt-module", "qca,ar9331";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "dpt-module:green:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q128FVSG SPI flash */
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "eTactica EG200";
- compatible = "etactica,eg200", "rme-eg200";
-
- aliases {
- serial0 = &uart;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <50>;
-
- restore {
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- modbus {
- label = "eg200:red:modbus";
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- etactica {
- label = "eg200:red:etactica";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- eth0 {
- label = "eg200:red:eth0";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wlan {
- label = "eg200:red:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
- mtd-mac-address = <&art 0x0>;
-
- gmac-config {
- device = <&gmac>;
- switch-phy-addr-swap = <1>;
- switch-phy-swap = <1>;
- };
-};
-
-ð1 {
- status = "okay";
- compatible = "syscon", "simple-mfd";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot@0 {
- reg = <0x0 0x40000>;
- read-only;
- };
-
- uboot-env@40000 {
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware@50000 {
- reg = <0x50000 0xfa0000>;
- };
-
- art: art@ff0000 {
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x1002>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "eTactica EG200";
+ compatible = "etactica,eg200", "rme-eg200";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <50>;
+
+ restore {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ modbus {
+ label = "eg200:red:modbus";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ etactica {
+ label = "eg200:red:etactica";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ eth0 {
+ label = "eg200:red:eth0";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wlan {
+ label = "eg200:red:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot@0 {
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ uboot-env@40000 {
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware@50000 {
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: art@ff0000 {
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "Onion Omega";
- compatible = "onion,omega", "qca,ar9331";
-
- aliases {
- serial0 = &uart;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "onion:amber:system";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Winbond 25Q128FVSG SPI flash */
- spiflash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "Onion Omega";
+ compatible = "onion,omega", "qca,ar9331";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "onion:amber:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q128FVSG SPI flash */
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9331_tl-wr703n_tl-mr10u.dtsi"
-
-/ {
- model = "TP-Link TL-MR10U";
- compatible = "tplink,tl-mr10u", "qca,ar9331";
-};
-
-®_usb_vbus {
- gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "TP-Link TL-MR3020 V1";
- compatible = "tplink,tl-mr3020-v1", "qca,ar9331";
-
- aliases {
- serial0 = &uart;
- led-status = &system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- system: wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led3g {
- label = "tp-link:green:3g";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- button1 {
- label = "sw1";
- linux,input-type = <EV_SW>;
- linux,code = <BTN_0>;
- gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- button2 {
- label = "sw2";
- linux,input-type = <EV_SW>;
- linux,code = <BTN_1>;
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
- };
-
- reg_usb_vbus: reg_usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- vbus-supply = <®_usb_vbus>;
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Spansion S25FL032PIF SPI flash */
- spiflash: s25sl032p@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x3c0000>;
- };
-
- partition@3e0000 {
- label = "config";
- reg = <0x3e0000 0x010000>;
- read-only;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <0>;
- switch-phy-swap = <0>;
- };
-};
-
-ð1 {
- status = "okay";
- compatible = "syscon", "simple-mfd";
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9331_tl-wr703n_tl-mr10u.dtsi"
-
-/ {
- model = "TP-Link TL-WR703N";
- compatible = "tplink,tl-wr703n", "qca,ar9331";
-};
-
-®_usb_vbus {
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- aliases {
- serial0 = &uart;
- led-status = &led_system;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "tl-wr703n:blue:system";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_usb_vbus: reg_usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- };
-
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- firmware: partition@20000 {
- reg = <0x20000 0x3d0000>;
- label = "firmware";
- };
-
- art: partition@3f0000 {
- reg = <0x3f0000 0x10000>;
- label = "art";
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <0>;
- switch-phy-swap = <0>;
- };
-};
-
-ð1 {
- status = "okay";
- compatible = "syscon", "simple-mfd";
-};
-
-&gpio {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- vbus-supply = <®_usb_vbus>;
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9331_tl-wr741nd-v4.dtsi"
-
-/ {
- model = "TP-Link TL-WR740N/ND v4";
- compatible = "tplink,tl-wr740nd-v4";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9331_tl-wr741nd-v4.dtsi"
-
-/ {
- model = "TP-Link TL-WR741N/ND v4";
- compatible = "tplink,tl-wr741nd-v4";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
- model = "TP-Link TL-WR741N/ND v4";
-
- aliases {
- serial0 = &uart;
- led-status = &led_system;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&switch_led_pins>;
-
- lan1 {
- label = "tp-link:green:lan1";
- gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- };
-
- lan2 {
- label = "tp-link:green:lan2";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
-
- lan3 {
- label = "tp-link:green:lan3";
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
-
- lan4 {
- label = "tp-link:green:lan4";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- led_system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "tp-link:green:wan";
- gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- firmware: partition@20000 {
- reg = <0x20000 0x3d0000>;
- label = "firmware";
- };
-
- art: partition@3f0000 {
- reg = <0x3f0000 0x10000>;
- label = "art";
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <1>;
- switch-phy-swap = <1>;
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-&gpio {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
+
+/ {
+ model = "TP-Link TL-MR10U";
+ compatible = "tplink,tl-mr10u", "qca,ar9331";
+};
+
+®_usb_vbus {
+ gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "TP-Link TL-MR3020 V1";
+ compatible = "tplink,tl-mr3020-v1", "qca,ar9331";
+
+ aliases {
+ serial0 = &uart;
+ led-status = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ system: wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3g {
+ label = "tp-link:green:3g";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ button1 {
+ label = "sw1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ button2 {
+ label = "sw2";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Spansion S25FL032PIF SPI flash */
+ spiflash: s25sl032p@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x3c0000>;
+ };
+
+ partition@3e0000 {
+ label = "config";
+ reg = <0x3e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
+
+/ {
+ model = "TP-Link TL-WR703N";
+ compatible = "tplink,tl-wr703n", "qca,ar9331";
+};
+
+®_usb_vbus {
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart;
+ led-status = &led_system;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "tl-wr703n:blue:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
+
+/ {
+ model = "TP-Link TL-WR740N/ND v4";
+ compatible = "tplink,tl-wr740nd-v4";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
+
+/ {
+ model = "TP-Link TL-WR741N/ND v4";
+ compatible = "tplink,tl-wr741nd-v4";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
+ model = "TP-Link TL-WR741N/ND v4";
+
+ aliases {
+ serial0 = &uart;
+ led-status = &led_system;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_pins>;
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2 {
+ label = "tp-link:green:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan3 {
+ label = "tp-link:green:lan3";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan4 {
+ label = "tp-link:green:lan4";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "tp-link:green:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9344_tl-wdr4300.dtsi"
-
-/ {
- model = "TP-Link WDR3600";
- compatible = "tplink,tl-wdr3600";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar9344_tl-wdr4300.dtsi"
-
-/ {
- model = "TP-Link WDR4300";
- compatible = "tplink,tl-wdr4300";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
-
-/ {
- model = "TP-Link WDR4300";
- compatible = "tplink,tl-wdr4300";
-
- aliases {
- led-status = &system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb1 {
- label = "tp-link:green:usb1";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port1>;
- linux,default-trigger = "usbport";
- };
-
- usb2 {
- label = "tp-link:green:usb2";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port2>;
- linux,default-trigger = "usbport";
- };
-
- wlan2g {
- label = "tp-link:green:wlan2g";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan5g {
- label = "tp-link:green:wlan5g";
- gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wifi {
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb1_power {
- gpio-export,name = "tp-link:power:usb1";
- gpio-export,output = <1>;
- gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_usb2_power {
- gpio-export,name = "tp-link:power:usb2";
- gpio-export,output = <1>;
- gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_ext_lna0 {
- gpio-export,name = "tp-link:ext:lna0";
- gpio-export,output = <1>;
- gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_ext_lna1 {
- gpio-export,name = "tp-link:ext:lna1";
- gpio-export,output = <1>;
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&ref {
- clock-frequency = <40000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- num-cs = <1>;
-
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x7d0000>;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&usb {
- status = "okay";
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-
- ath9k: wifi@168c,0033 {
- compatible = "pci168c,0033";
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&uboot 0x1fc00>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
-
- qca,ar8327-initvals = <
- 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
- 0x10 0x80000080 /* POWER_ON_STRIP */
- 0x50 0xc737c737 /* LED_CTRL0 */
- 0x54 0x00000000 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x0030c300 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- /* default for ar934x, except for 1000M */
- pll-data = <0x06000000 0x00000101 0x00001616>;
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-2)>;
-
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link WDR3600";
+ compatible = "tplink,tl-wdr3600";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link WDR4300";
+ compatible = "tplink,tl-wdr4300";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "TP-Link WDR4300";
+ compatible = "tplink,tl-wdr4300";
+
+ aliases {
+ led-status = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb1 {
+ label = "tp-link:green:usb1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "tp-link:green:usb2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "tp-link:green:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna0 {
+ gpio-export,name = "tp-link:ext:lna0";
+ gpio-export,output = <1>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna1 {
+ gpio-export,name = "tp-link:ext:lna1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@168c,0033 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRIP */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-2)>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533_tl-wr841.dtsi"
-
-/ {
- compatible = "tplink,tl-wr841n-v9", "qca,qca9533";
- model = "TP-Link TL-WR841N/ND Version 9";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-status = &system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "tp-link:green:wlan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- system: wifi_qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wan {
- label = "tp-link:green:wan";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan1 {
- label = "tp-link:green:lan1";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan2 {
- label = "tp-link:green:lan2";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan3 {
- label = "tp-link:green:lan3";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan4 {
- label = "tp-link:green:lan4";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- rfkill {
- label = "RFKILL button";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x3d0000>;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð1 {
- mtd-mac-address = <&uboot 0x1fc00>;
-};
-
-ð0 {
- status = "okay";
- phy-handle = <&swphy4>;
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9533_tplink_tl-wr841.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841n-v9", "qca,qca9533";
+ model = "TP-Link TL-WR841N/ND Version 9";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9533.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-status = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ system: wifi_qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wan {
+ label = "tp-link:green:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan2 {
+ label = "tp-link:green:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan3 {
+ label = "tp-link:green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan4 {
+ label = "tp-link:green:lan4";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9558_tl-archer-c7.dtsi"
-
-/ {
- compatible = "tplink,tl-archer-c7-v2", "qca,qca9558";
- model = "TP-Link Archer C7 Version 2";
-};
-
-&gpio_keys {
- rfkill {
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- };
-};
-
-&gpio_leds {
- wlan5g {
- label = "tp-link:green:wlan5g";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-};
-
-&mtdparts {
- uboot: u-boot@0 {
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- firmware@20000 {
- reg = <0x020000 0xfd0000>;
- };
-
- art: art@ff0000 {
- reg = <0xff0000 0x010000>;
- read-only;
- };
-};
\ No newline at end of file
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-status = &system;
- };
-
- gpio_leds: leds {
- compatible = "gpio-leds";
-
- system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- usb1 {
- label = "tp-link:green:usb1";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port1>;
- linux,default-trigger = "usbport";
- };
-
- usb2 {
- label = "tp-link:green:usb2";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port0>;
- linux,default-trigger = "usbport";
- };
-
- led_wlan2g: wlan2g {
- label = "tp-link:green:wlan2g";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy1tpt";
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- gpio_keys: keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb1_power {
- gpio-export,name = "tp-link:power:usb1";
- gpio-export,output = <1>;
- gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_usb2_power {
- gpio-export,name = "tp-link:power:usb2";
- gpio-export,output = <1>;
- gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- };
-
- };
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- mtdparts: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
-
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
- 0x50 0xc737c737 /* LED_CTRL0 */
- 0x54 0x00000000 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x0030c300 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- 0x94 0x0000007e /* PORT6 STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
- phy-handle = <&phy0>;
-
- gmac-config {
- device = <&gmac>;
- rgmii-enabled = <1>;
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9558_tl-wr1043nd.dtsi"
-
-/ {
- compatible = "tplink,tl-wr1043nd-v2", "qca,qca9557";
- model = "TP-Link TL-WR1043ND Version 2";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9558_tl-wr1043nd.dtsi"
-
-/ {
- compatible = "tplink,tl-wr1043nd-v3", "qca,qca9557";
- model = "TP-Link TL-WR1043ND Version 3";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-status = &system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
-
- usb {
- label = "tp-link:green:usb";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port0>;
- linux,default-trigger = "usbport";
- };
-
- wifi_green {
- label = "tp-link:green:wlan";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wifi {
- label = "RFKILL button";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb_power {
- gpio-export,name = "tp-link:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x7d0000>;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
- 0x10 0x81000080 /* POWER_ON_STRIP */
- 0x50 0xcc35cc35 /* LED_CTRL0 */
- 0x54 0xca35ca35 /* LED_CTRL1 */
- 0x58 0xc935c935 /* LED_CTRL2 */
- 0x5c 0x03ffff00 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- 0x94 0x0000007e /* PORT6 STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <1>;
- phy-handle = <&phy0>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_tplink_tl-archer-c7.dtsi"
+
+/ {
+ compatible = "tplink,tl-archer-c7-v2", "qca,qca9558";
+ model = "TP-Link Archer C7 Version 2";
+};
+
+&gpio_keys {
+ rfkill {
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+};
+
+&gpio_leds {
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&mtdparts {
+ uboot: u-boot@0 {
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ firmware@20000 {
+ reg = <0x020000 0xfd0000>;
+ };
+
+ art: art@ff0000 {
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
\ No newline at end of file
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-status = &system;
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb1 {
+ label = "tp-link:green:usb1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "tp-link:green:usb2";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_wlan2g: wlan2g {
+ label = "tp-link:green:wlan2g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys: keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ mtdparts: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_tplink_tl-wr1043nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v2", "qca,qca9557";
+ model = "TP-Link TL-WR1043ND Version 2";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_tplink_tl-wr1043nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v3", "qca,qca9557";
+ model = "TP-Link TL-WR1043ND Version 3";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-status = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ usb {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi_green {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
-
-/ {
- model = "Phicomm K2T";
- compatible = "phicomm,k2t";
-
- aliases {
- led-status = &status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- status_blue {
- label = "phicomm:blue:status";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- status_red: status_red {
- label = "phicomm:red:status";
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- status_yellow {
- label = "phicomm:yellow:status";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&spi {
- num-cs = <1>;
-
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x030000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "permanent";
- reg = <0x040000 0x50000>;
- read-only;
- };
-
- partition@90000 {
- label = "firmware";
- reg = <0x090000 0xf60000>;
- };
-
- art: partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
-
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x10 0x81000080 /* POWER_ON_STRIP */
- 0x50 0xcc35cc35 /* LED_CTRL0 */
- 0x54 0xcb37cb37 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x00f3cf00 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x03000101 0x00000101 0x00001919>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ model = "Phicomm K2T";
+ compatible = "phicomm,k2t";
+
+ aliases {
+ led-status = &status_red;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_blue {
+ label = "phicomm:blue:status";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ status_red: status_red {
+ label = "phicomm:red:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ status_yellow {
+ label = "phicomm:yellow:status";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x030000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "permanent";
+ reg = <0x040000 0x50000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "firmware";
+ reg = <0x090000 0xf60000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
-
-/ {
- compatible = "tplink,re450-v2", "qca,qca9563";
- model = "TP-Link RE450 v2";
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-status = &system;
- mdio-gpio0 = &mdio2;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system: power {
- label = "tp-link:blue:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "tp-link:blue:wlan2g";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g {
- label = "tp-link:blue:wlan5g";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- lan_link {
- label = "tp-link:green:lan_link";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan_data {
- label = "tp-link:green:lan_data";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wps_blue {
- label = "tp-link:blue:wps";
- gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- wps_red {
- label = "tp-link:red:wps";
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- power {
- label = "Power button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- leds {
- label = "LED control button";
- linux,code = <BTN_0>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "WPS button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- mdio2: mdio {
- compatible = "virtual,mdio-gpio";
-
- gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
- <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- device_type = "ethernet-phy";
- reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0x5e0000>;
- };
-
- partition@600000 {
- label = "partition-table";
- reg = <0x600000 0x010000>;
- read-only;
- };
-
- info: partition@610000 {
- label = "product-info";
- reg = <0x610000 0x020000>;
- read-only;
- };
-
- partition@630000 {
- label = "config";
- reg = <0x630000 0x020000>;
- read-only;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
- mtd-mac-address = <&info 0x8>;
- phy-handle = <&phy0>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-status = &system;
- };
-
- gpio_leds: leds {
- compatible = "gpio-leds";
-
- system: system {
- label = "tp-link:green:system";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
-
- wifi_green {
- label = "tp-link:green:wlan";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wan {
- label = "tp-link:green:wan";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wan_fail {
- label = "tp-link:orange:wan";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan1 {
- label = "tp-link:green:lan1";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan2 {
- label = "tp-link:green:lan2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan3 {
- label = "tp-link:green:lan3";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- lan4 {
- label = "tp-link:green:lan4";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wifi {
- label = "RFKILL button";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb_power {
- gpio-export,name = "tp-link:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x020000 0xf30000>;
- };
-
- info: partition@f50000 {
- label = "product-info";
- reg = <0xf50000 0x020000>;
- read-only;
- };
-
- partition@f70000 {
- label = "config";
- reg = <0xf70000 0x050000>;
- read-only;
- };
-
- partition@fc0000 {
- label = "partition-table";
- reg = <0xfc0000 0x010000>;
- read-only;
- };
-
- partition@fd0000 {
- label = "logs";
- reg = <0xfd0000 0x020000>;
- read-only;
- };
-
- art: partition@ff0000 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy-mask = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
-
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&info 0x8>;
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9563_tl-wr1043n.dtsi"
-
-/ {
- compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
- model = "TP-Link TL-WR1043ND Version 4";
-};
-
-&gpio_leds {
- usb {
- label = "tp-link:green:usb";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- default-state = "off";
- trigger-sources = <&hub_port0>;
- linux,default-trigger = "usbport";
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ compatible = "tplink,re450-v2", "qca,qca9563";
+ model = "TP-Link RE450 v2";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-status = &system;
+ mdio-gpio0 = &mdio2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system: power {
+ label = "tp-link:blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "tp-link:blue:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "tp-link:blue:wlan5g";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan_link {
+ label = "tp-link:green:lan_link";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan_data {
+ label = "tp-link:green:lan_data";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wps_blue {
+ label = "tp-link:blue:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ wps_red {
+ label = "tp-link:red:wps";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ power {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ device_type = "ethernet-phy";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x5e0000>;
+ };
+
+ partition@600000 {
+ label = "partition-table";
+ reg = <0x600000 0x010000>;
+ read-only;
+ };
+
+ info: partition@610000 {
+ label = "product-info";
+ reg = <0x610000 0x020000>;
+ read-only;
+ };
+
+ partition@630000 {
+ label = "config";
+ reg = <0x630000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&info 0x8>;
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-status = &system;
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ wifi_green {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wan {
+ label = "tp-link:green:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wan_fail {
+ label = "tp-link:orange:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan2 {
+ label = "tp-link:green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan3 {
+ label = "tp-link:green:lan3";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ lan4 {
+ label = "tp-link:green:lan4";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xf30000>;
+ };
+
+ info: partition@f50000 {
+ label = "product-info";
+ reg = <0xf50000 0x020000>;
+ read-only;
+ };
+
+ partition@f70000 {
+ label = "config";
+ reg = <0xf70000 0x050000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "partition-table";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "logs";
+ reg = <0xfd0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
+ model = "TP-Link TL-WR1043ND Version 4";
+};
+
+&gpio_leds {
+ usb {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
include ./common-tp-link.mk
-define Device/tl-archer-c7-v2
+define Device/tplink_tl-archer-c7-v2
$(Device/tplink-16mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-LINK Archer C7 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
TPLINK_HWID := 0xc7000002
- SUPPORTED_DEVICES := tplink,tl-archer-c7-v2
IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
-TARGET_DEVICES += tl-archer-c7-v2
+TARGET_DEVICES += tplink_tl-archer-c7-v2
-define Device/tl-re450-v2
+define Device/tplink_tl-re450-v2
$(Device/tplink)
ATH_SOC := qca9563
IMAGE_SIZE := 6016k
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- SUPPORTED_DEVICES := tplink,re450-v2
endef
-TARGET_DEVICES += tl-re450-v2
+TARGET_DEVICES += tplink_tl-re450-v2
-define Device/tl-wdr3600
+define Device/tplink_tl-wdr3600
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_TITLE := TP-LINK TL-WDR3600
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x36000001
- SUPPORTED_DEVICES := tplink,tl-wdr3600 tl-wdr3600
+ SUPPORTED_DEVICES += tl-wdr3600
endef
-TARGET_DEVICES += tl-wdr3600
+TARGET_DEVICES += tplink_tl-wdr3600
-define Device/tl-wdr4300
- $(Device/tl-wdr3600)
+define Device/tplink_tl-wdr4300
+ $(Device/tplink_tl-wdr3600)
DEVICE_TITLE := TP-LINK TL-WDR4300
TPLINK_HWID := 0x43000001
- SUPPORTED_DEVICES := tplink,tl-wdr4300 tl-wdr4300
+ SUPPORTED_DEVICES += tl-wdr4300
endef
-TARGET_DEVICES += tl-wdr4300
+TARGET_DEVICES += tplink_tl-wdr4300
-define Device/tl-wr1043nd-v1
+define Device/tplink_tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430001
- SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
+ SUPPORTED_DEVICES += tl-wr1043nd
endef
-TARGET_DEVICES += tl-wr1043nd-v1
+TARGET_DEVICES += tplink_tl-wr1043nd-v1
-define Device/tl-wr1043nd-v2
+define Device/tplink_tl-wr1043nd-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430002
- SUPPORTED_DEVICES := tplink,tl-wr1043nd-v2 tl-wr1043nd-v2
+ SUPPORTED_DEVICES += tl-wr1043nd-v2
endef
-TARGET_DEVICES += tl-wr1043nd-v2
+TARGET_DEVICES += tplink_tl-wr1043nd-v2
-define Device/tl-wr1043nd-v3
+define Device/tplink_tl-wr1043nd-v3
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430003
- SUPPORTED_DEVICES := tplink,tl-wr1043nd-v3 tl-wr1043nd-v3
+ SUPPORTED_DEVICES += tl-wr1043nd-v3
endef
-TARGET_DEVICES += tl-wr1043nd-v3
+TARGET_DEVICES += tplink_tl-wr1043nd-v3
-define Device/tl-wr1043nd-v4
+define Device/tplink_tl-wr1043nd-v4
$(Device/tplink)
ATH_SOC := qca9563
IMAGE_SIZE := 15552k
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- SUPPORTED_DEVICES := tplink,tl-wr1043nd-v4 tl-wr1043nd-v4
+ SUPPORTED_DEVICES += tl-wr1043nd-v4
endef
-TARGET_DEVICES += tl-wr1043nd-v4
+TARGET_DEVICES += tplink_tl-wr1043nd-v4
-define Device/tl-wr2543-v1
+define Device/tplink_tl-wr2543-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar7242
DEVICE_TITLE := TP-LINK TL-WR2543N/ND v1
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
- SUPPORTED_DEVICES := tplink,tl-wr2543-v1 tl-wr2543-v1
+ SUPPORTED_DEVICES += tl-wr2543-v1
endef
-TARGET_DEVICES += tl-wr2543-v1
+TARGET_DEVICES += tplink_tl-wr2543-v1
DEVICE_TITLE := Embedded Wireless Dorin
DEVICE_PACKAGES := kmod-usb-chipidea2
IMAGE_SIZE := 16000k
- SUPPORTED_DEVICES += ew-dorin
endef
TARGET_DEVICES += embeddedwireless_dorin
-define Device/etactica-eg200
+define Device/etactica_eg200
ATH_SOC := ar9331
DEVICE_TITLE := eTactica EG200
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
- SUPPORTED_DEVICES += etactica,eg200 rme-eg200
+ SUPPORTED_DEVICES += rme-eg200
endef
-TARGET_DEVICES += etactica-eg200
+TARGET_DEVICES += etactica_eg200
define Device/glinet_ar150
ATH_SOC := ar9330
endef
TARGET_DEVICES += buffalo_wzr-hp-g450h
-define Device/phicomm-k2t
+define Device/phicomm_k2t
ATH_SOC := qca9563
DEVICE_TITLE := Phicomm K2T
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k ath10k-firmware-qca9888
- SUPPORTED_DEVICES += phicomm,k2t
endef
-TARGET_DEVICES += phicomm-k2t
+TARGET_DEVICES += phicomm_k2t
endef
TARGET_DEVICES += netgear_wnr612-v2
-define Device/n150r
+define Device/on_n150r
ATH_SOC := ar7240
DEVICE_TITLE := ON Network N150R
- DEVICE_DTS := ar7240_on_n150r
NETGEAR_KERNEL_MAGIC := 0x32303631
KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- SUPPORTED_DEVICES := on,n150r n150r
+ SUPPORTED_DEVICES += n150r
endef
-TARGET_DEVICES += n150r
+TARGET_DEVICES += on_n150r
include ./common-tp-link.mk
-define Device/tl-mr10u
+define Device/tplink_tl-mr10u
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-Link TL-MR10U
DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x00100101
- SUPPORTED_DEVICES := tplink,tl-mr10u tl-mr10u
+ SUPPORTED_DEVICES += tl-mr10u
endef
-TARGET_DEVICES += tl-mr10u
+TARGET_DEVICES += tplink_tl-mr10u
-define Device/tl-mr3020-v1
+define Device/tplink_tl-mr3020-v1
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-LINK TL-MR3020 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x30200001
- SUPPORTED_DEVICES := tplink,tl-mr3020-v1 tl-mr3020-v1
+ SUPPORTED_DEVICES += tl-mr3020-v1
endef
-TARGET_DEVICES += tl-mr3020-v1
+TARGET_DEVICES += tplink_tl-mr3020-v1
-define Device/tl-mr3220-v1
+define Device/tplink_tl-mr3220-v1
$(Device/tplink-4m)
ATH_SOC := ar7241
DEVICE_TITLE := TP-Link TL-MR3220 v1
TPLINK_HWID := 0x32200001
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES := tplink,tl-mr3220-v1 tl-mr3220-v1
+ SUPPORTED_DEVICES += tl-mr3220-v1
endef
-TARGET_DEVICES += tl-mr3220-v1
+TARGET_DEVICES += tplink_tl-mr3220-v1
-define Device/tl-mr3420-v1
+define Device/tplink_tl-mr3420-v1
$(Device/tplink-4m)
ATH_SOC := ar7241
DEVICE_TITLE := TP-Link TL-MR3420 v1
TPLINK_HWID := 0x34200001
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES := tplink,tl-mr3420-v1 tl-mr3420-v1
+ SUPPORTED_DEVICES += tl-mr3420-v1
endef
-TARGET_DEVICES += tl-mr3420-v1
+TARGET_DEVICES += tplink_tl-mr3420-v1
-define Device/tl-wr703n
+define Device/tplink_tl-wr703n
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-Link TL-WR703N
DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
- SUPPORTED_DEVICES := tplink,tl-wr703n tl-wr703n
+ SUPPORTED_DEVICES += tl-wr703n
endef
-TARGET_DEVICES += tl-wr703n
+TARGET_DEVICES += tplink_tl-wr703n
-define Device/tl-wr740n-v2
+define Device/tplink_tl-wr740n-v2
$(Device/tplink-4m)
ATH_SOC := ar7240
DEVICE_TITLE := TP-Link TL-WR740N/ND v2
TPLINK_HWID := 0x07400001
- SUPPORTED_DEVICES := tplink,tl-wr740n-v2 tl-wr740n-v2
+ SUPPORTED_DEVICES += tl-wr740n-v2
endef
-TARGET_DEVICES += tl-wr740n-v2
+TARGET_DEVICES += tplink_tl-wr740n-v2
-define Device/tl-wr740nd-v4
+define Device/tplink_tl-wr740nd-v4
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-LINK TL-WR740N/ND v4
TPLINK_HWID := 0x07400004
- SUPPORTED_DEVICES := tplink,tl-wr740n-v4 tl-wr740n-v4
+ SUPPORTED_DEVICES += tl-wr740n-v4
endef
-TARGET_DEVICES += tl-wr740nd-v4
+TARGET_DEVICES += tplink_tl-wr740nd-v4
-define Device/tl-wr741nd-v4
+define Device/tplink_tl-wr741nd-v4
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-LINK TL-WR741N/ND v4
TPLINK_HWID := 0x07410004
- SUPPORTED_DEVICES := tplink,tl-wr741n-v4 tl-wr741n-v4
+ SUPPORTED_DEVICES += tl-wr741n-v4
endef
-TARGET_DEVICES += tl-wr741nd-v4
+TARGET_DEVICES += tplink_tl-wr741nd-v4
-define Device/tl-wr841-v7
+define Device/tplink_tl-wr841-v7
$(Device/tplink-4m)
ATH_SOC := ar7241
DEVICE_TITLE := TP-LINK TL-WR841N/ND v7
TPLINK_HWID := 0x08410007
- SUPPORTED_DEVICES := tplink,tl-wr841-v7 tl-wr841-v7
+ SUPPORTED_DEVICES += tl-wr841-v7
endef
-TARGET_DEVICES += tl-wr841-v7
+TARGET_DEVICES += tplink_tl-wr841-v7
-define Device/tl-wr841-v9
+define Device/tplink_tl-wr841-v9
$(Device/tplink-4mlzma)
ATH_SOC := qca9533
DEVICE_TITLE := TP-LINK TL-WR841N/ND v9
TPLINK_HWID := 0x08410009
- SUPPORTED_DEVICES := tplink,tl-wr841n-v9 tl-wr841n-v9
+ SUPPORTED_DEVICES += tl-wr841n-v9
endef
-TARGET_DEVICES += tl-wr841-v9
+TARGET_DEVICES += tplink_tl-wr841-v9
projects / openwrt / staging / thess.git / commitdiff