bcm53xx: fix platform clocks & USB 2.0 PHY

This fixes WARNing, missing clocks and
[   10.422481] bcm_ns_usb2 1800c164.usb2-phy: Clock not defined

Fixes: 5901917b936d ("bcm53xx: use more upsteam DT patches from 5.16 / 5.17")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

diff --git a/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch b/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch
new file mode 100644 (file)
index 0000000..cee3773
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.10/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch
@@ -0,0 +1,62 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 23 Nov 2021 13:13:05 +0100
+Subject: [PATCH] ARM: dts: BCM5301X: Switch back to old clock nodes names
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+First of all using the same node name prefix resulted in trying to
+register 2 clocks under the same "clock-controller" name:
+
+[    0.000000] __clk_core_init: clk clock-controller already initialized
+[    0.000000] ------------[ cut here ]------------
+[    0.000000] WARNING: CPU: 0 PID: 0 at drivers/clk/bcm/clk-iproc-pll.c:802 iproc_pll_clk_setup+0x4c8/0x4f4
+[    0.000000] Modules linked in:
+[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.80 #0
+[    0.000000] Hardware name: BCM5301X
+[    0.000000] [<c0108410>] (unwind_backtrace) from [<c0104bc4>] (show_stack+0x10/0x14)
+[    0.000000] [<c0104bc4>] (show_stack) from [<c03dca28>] (dump_stack+0x94/0xa8)
+[    0.000000] [<c03dca28>] (dump_stack) from [<c0118440>] (__warn+0xb8/0x114)
+[    0.000000] [<c0118440>] (__warn) from [<c0118504>] (warn_slowpath_fmt+0x68/0x78)
+[    0.000000] [<c0118504>] (warn_slowpath_fmt) from [<c043281c>] (iproc_pll_clk_setup+0x4c8/0x4f4)
+[    0.000000] [<c043281c>] (iproc_pll_clk_setup) from [<c0818c04>] (nsp_genpll_clk_init+0x30/0x38)
+[    0.000000] [<c0818c04>] (nsp_genpll_clk_init) from [<c0818634>] (of_clk_init+0x118/0x1f8)
+[    0.000000] [<c0818634>] (of_clk_init) from [<c08039b0>] (time_init+0x24/0x30)
+[    0.000000] [<c08039b0>] (time_init) from [<c0800d14>] (start_kernel+0x398/0x50c)
+[    0.000000] [<c0800d14>] (start_kernel) from [<00000000>] (0x0)
+[    0.000000] ---[ end trace fe236bfe9559ee50 ]---
+
+Secondly using any other names than "lcpll0" and "genpll" breaks output
+clocks:
+
+$ cat /sys/kernel/debug/clk/usbclk/clk_rate
+0
+
+For some reason iproc_clk_recalc_rate() gets called with "parent_rate"
+argument 0 whenever clocks aren't named "lcpll0" and "genpll".
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -421,7 +421,7 @@
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+ 
+-                      lcpll0: clock-controller@100 {
++                      lcpll0: lcpll0@100 {
+                               #clock-cells = <1>;
+                               compatible = "brcm,nsp-lcpll0";
+                               reg = <0x100 0x14>;
+@@ -430,7 +430,7 @@
+                                                    "sdio", "ddr_phy";
+                       };
+ 
+-                      genpll: clock-controller@140 {
++                      genpll: genpll@140 {
+                               #clock-cells = <1>;
+                               compatible = "brcm,nsp-genpll";
+                               reg = <0x140 0x24>;