Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.
Specification:
- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
- 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
- JP1: Vcc, GND, TX, RX from reset button side
Flash instruction using factory image:
1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
wd,mynet-wifi-rangeextender)
ucidef_set_interface_lan "eth0"
;;
- buffalo,wzr-hp-ag300h)
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
+ buffalo,bhr-4grv|\
buffalo,wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
;;
+ buffalo,wzr-hp-ag300h)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
dlink,dir-825-b1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7242_buffalo_wzr-bhr.dtsi"
+
+/ {
+ compatible = "buffalo,bhr-4grv", "qca,ar7242";
+ model = "Buffalo BHR-4GRV";
+};
+
+&sec_vpn {
+ label = "buffalo:orange:vpn";
+};
endef
TARGET_DEVICES += avm_fritz4020
+define Device/buffalo_bhr-4grv
+ ATH_SOC := ar7242
+ DEVICE_TITLE := Buffalo BHR-4GRV
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ IMAGE_SIZE := 32256k
+ IMAGES += factory.bin tftp.bin
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | buffalo-tag BHR-4GRV
+ IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
+ SUPPORTED_DEVICES += wzr-hp-g450h
+endef
+TARGET_DEVICES += buffalo_bhr-4grv
+
define Device/buffalo_wzr-hp-ag300h
ATH_SOC := ar7161
DEVICE_TITLE := Buffalo WZR-HP-AG300H