Staging: rtl8192u: r8192U_core.c Fixed open brace { placement

Fixed open brace placement to address the following code-style errors:

ERROR: that open brace { should be on the previous line

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9dba99ddd2d4f80f78d32d68578129a74ba9d71d..512bf5cf40637f44f26368ba03e3f4d3af5df82a 100644 (file)
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1115,8 +1115,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
                tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
                tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
                tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
-               if (tcb_desc->bAMPDUEnable)
-               {//AMPDU enabled
+               if (tcb_desc->bAMPDUEnable) {//AMPDU enabled
                        tx_fwinfo->AllowAggregation = 1;
                        /* DWORD 1 */
                        tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
@@ -1331,8 +1330,7 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
 
        for (i = 0; i < net->rates_len; i++) {
                basic_rate = net->rates[i]&0x7f;
-               switch (basic_rate)
-               {
+               switch (basic_rate) {
                        case MGN_1M:
                                *rate_config |= RRSR_1M;
                                break;
@@ -1371,11 +1369,9 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
                                break;
                }
        }
-       for (i = 0; i < net->rates_ex_len; i++)
-       {
+       for (i = 0; i < net->rates_ex_len; i++) {
                basic_rate = net->rates_ex[i]&0x7f;
-               switch (basic_rate)
-               {
+               switch (basic_rate) {
                        case MGN_1M:
                                *rate_config |= RRSR_1M;
                                break;
@@ -1498,8 +1494,7 @@ u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
        u16     N_DBPS;
        u16     Ceiling;
 
-       if (rtl8192_IsWirelessBMode(DataRate))
-       {
+       if (rtl8192_IsWirelessBMode(DataRate)) {
                if (bManagementFrame || !bShortPreamble || DataRate == 10) /* long preamble */
                        FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
                else // Short preamble
@@ -1671,8 +1666,7 @@ static u8 MRateToHwRate8190Pci(u8 rate)
 {
        u8  ret = DESC90_RATE1M;
 
-       switch (rate)
-       {
+       switch (rate) {
                case MGN_1M:
                        ret = DESC90_RATE1M;
                        break;
@@ -1827,8 +1821,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
        tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
        tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
        tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
-       if (tcb_desc->bAMPDUEnable) /* AMPDU enabled */
-       {
+       if (tcb_desc->bAMPDUEnable) { /* AMPDU enabled */
                tx_fwinfo->AllowAggregation = 1;
                /* DWORD 1 */
                tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
@@ -2314,8 +2307,7 @@ void rtl8192_update_ratr_table(struct net_device *dev)
                break;
        case IEEE_N_24G:
        case IEEE_N_5G:
-               if (ieee->pHTInfo->PeerMimoPs == 0) /* MIMO_PS_STATIC */
-               {
+               if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
                        ratr_value &= 0x0007F007;
                } else {
                        if (priv->rf_type == RF_1T2R)
@@ -2699,8 +2691,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
                else
                        priv->EEPROM_Def_Ver = 1;
                RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
-               if (priv->EEPROM_Def_Ver == 0) /* old eeprom definition */
-               {
+               if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */
                        int i;
                        if (bLoad_From_EEPOM)
                                priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
@@ -3111,15 +3102,13 @@ static bool rtl8192_adapter_start(struct net_device *dev)
        //
 #ifdef TO_DO_LIST
        if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
-               if (pMgntInfo->RegRfOff == TRUE) /* User disable RF via registry. */
-               {
+               if (pMgntInfo->RegRfOff == TRUE) { /* User disable RF via registry. */
                        RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
                        MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
                        // Those actions will be discard in MgntActSet_RF_State because of the same state
                        for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
                                PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
-               } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) /* H/W or S/W RF OFF before sleep. */
-               {
+               } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */
                        RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
                        MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
                } else {
@@ -3128,8 +3117,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
                        RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
                }
        } else {
-               if (pHalData->eRFPowerState == eRfOff)
-               {
+               if (pHalData->eRFPowerState == eRfOff) {
                        MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
                        // Those actions will be discard in MgntActSet_RF_State because of the same state
                        for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
@@ -3138,8 +3126,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
        }
 #endif
        //config RF.
-       if (priv->ResetProgress == RESET_TYPE_NORESET)
-       {
+       if (priv->ResetProgress == RESET_TYPE_NORESET) {
                rtl8192_phy_RFConfig(dev);
                RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
        }
@@ -3647,8 +3634,7 @@ void rtl819x_watchdog_wqcallback(struct work_struct *work)
        }
        if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
            (priv->bForcedSilentReset ||
-           (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) /* This is control by OID set in Pomelo */
-       {
+           (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) { /* This is control by OID set in Pomelo */
                RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
                rtl819x_ifsilentreset(dev);
        }
@@ -3928,8 +3914,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate)
        u8  ret_rate = 0xff;
 
        if (!bIsHT) {
-               switch (rate)
-               {
+               switch (rate) {
                        case DESC90_RATE1M:
                                ret_rate = MGN_1M;
                                break;
@@ -3974,8 +3959,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate)
                }
 
        } else {
-               switch (rate)
-               {
+               switch (rate) {
                        case DESC90_RATEMCS0:
                                ret_rate = MGN_MCS0;
                                break;
@@ -4058,8 +4042,7 @@ static void UpdateRxPktTimeStamp8190(struct net_device *dev,
 {
        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 
-       if (stats->bIsAMPDU && !stats->bFirstMPDU)
-       {
+       if (stats->bIsAMPDU && !stats->bFirstMPDU) {
                stats->mac_time[0] = priv->LastRxDescTSFLow;
                stats->mac_time[1] = priv->LastRxDescTSFHigh;
        } else {
@@ -4250,10 +4233,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
                }
 
                // <2> Showed on UI for engineering
-               if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
-               {
-                       for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) /* 2 spatial stream */
-                       {
+               if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
+                       for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { /* 2 spatial stream */
                                if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) {
                                        if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) /* initialize */
                                                priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
@@ -4676,8 +4657,7 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
        else
                preamble_guardinterval = 0;// long
 
-       switch (stats->rate)
-       {
+       switch (stats->rate) {
                //
                // CCK rate
                //
@@ -5394,8 +5374,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
 
        ieee->hwsec_active = 1;
 
-       if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) /* add hwsec_support flag to totol control hw_sec on/off */
-       {
+       if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { /* add hwsec_support flag to totol control hw_sec on/off */
                ieee->hwsec_active = 0;
                SECR_value &= ~SCR_RxDecEnable;
        }
@@ -5427,16 +5406,14 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
                TargetCommand  = i+CAM_CONTENT_COUNT*EntryNo;
                TargetCommand |= BIT31|BIT16;
 
-               if (i == 0) /* MAC|Config */
-               {
+               if (i == 0) { /* MAC|Config */
                        TargetContent = (u32)(*(MacAddr+0)) << 16|
                                        (u32)(*(MacAddr+1)) << 24|
                                        (u32)usConfig;
 
                        write_nic_dword(dev, WCAMI, TargetContent);
                        write_nic_dword(dev, RWCAM, TargetCommand);
-               } else if (i == 1) /* MAC */
-               {
+               } else if (i == 1) { /* MAC */
                        TargetContent = (u32)(*(MacAddr+2))      |
                                        (u32)(*(MacAddr+3)) <<  8|
                                        (u32)(*(MacAddr+4)) << 16|