USB: EHCI: ehci-mv: add DT support

Add Device tree support.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 43b300c90875b8a3ed8cb9ac690bdf0f13a95c1b..f26109eafdbfbc3633a9126c18f41cef27e26e01 100644 (file)
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -34,11 +34,11 @@ struct ehci_hcd_mv {
        void __iomem *op_regs;
 
        struct usb_phy *otg;
+       struct clk *clk;
 
-       struct mv_usb_platform_data *pdata;
        struct phy *phy;
 
-       struct clk *clk;
+       int (*set_vbus)(unsigned int vbus);
 };
 
 static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
@@ -100,11 +100,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
        int retval = -ENODEV;
        u32 offset;
 
-       if (!pdata) {
-               dev_err(&pdev->dev, "missing platform_data\n");
-               return -ENODEV;
-       }
-
        if (usb_disabled())
                return -ENODEV;
 
@@ -114,7 +109,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, hcd);
        ehci_mv = hcd_to_ehci_hcd_mv(hcd);
-       ehci_mv->pdata = pdata;
+
+       ehci_mv->mode = MV_USB_MODE_HOST;
+       if (pdata) {
+               ehci_mv->mode = pdata->mode;
+               ehci_mv->set_vbus = pdata->set_vbus;
+       }
 
        ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
        if (IS_ERR(ehci_mv->phy)) {
@@ -166,7 +166,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
        ehci = hcd_to_ehci(hcd);
        ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
 
-       ehci_mv->mode = pdata->mode;
        if (ehci_mv->mode == MV_USB_MODE_OTG) {
                ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
                if (IS_ERR(ehci_mv->otg)) {
@@ -191,8 +190,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
                /* otg will enable clock before use as host */
                mv_ehci_disable(ehci_mv);
        } else {
-               if (pdata->set_vbus)
-                       pdata->set_vbus(1);
+               if (ehci_mv->set_vbus)
+                       ehci_mv->set_vbus(1);
 
                retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
                if (retval) {
@@ -211,8 +210,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
        return 0;
 
 err_set_vbus:
-       if (pdata->set_vbus)
-               pdata->set_vbus(0);
+       if (ehci_mv->set_vbus)
+               ehci_mv->set_vbus(0);
 err_disable_clk:
        mv_ehci_disable(ehci_mv);
 err_put_hcd:
@@ -233,8 +232,8 @@ static int mv_ehci_remove(struct platform_device *pdev)
                otg_set_host(ehci_mv->otg->otg, NULL);
 
        if (ehci_mv->mode == MV_USB_MODE_HOST) {
-               if (ehci_mv->pdata->set_vbus)
-                       ehci_mv->pdata->set_vbus(0);
+               if (ehci_mv->set_vbus)
+                       ehci_mv->set_vbus(0);
 
                mv_ehci_disable(ehci_mv);
        }
@@ -265,14 +264,20 @@ static void mv_ehci_shutdown(struct platform_device *pdev)
                hcd->driver->shutdown(hcd);
 }
 
+static const struct of_device_id ehci_mv_dt_ids[] = {
+       { .compatible = "marvell,pxau2o-ehci", },
+       {},
+};
+
 static struct platform_driver ehci_mv_driver = {
        .probe = mv_ehci_probe,
        .remove = mv_ehci_remove,
        .shutdown = mv_ehci_shutdown,
        .driver = {
-                  .name = "mv-ehci",
-                  .bus = &platform_bus_type,
-                  },
+               .name = "mv-ehci",
+               .bus = &platform_bus_type,
+               .of_match_table = ehci_mv_dt_ids,
+       },
        .id_table = ehci_id_table,
 };