--- /dev/null
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARPD is not set
+# CONFIG_ATH79 is not set
+CONFIG_B44=y
+CONFIG_B44_PCI=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_WDT=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BUG is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CFE=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IRQ_CPU=y
+CONFIG_KALLSYMS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MACH_NO_WESTBRIDGE=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MTD_BCM47XX=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_HZ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DEBUG=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SPROM=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+This patch has been in OpenWRT for a long time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 38 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -28,6 +28,8 @@
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -166,6 +168,31 @@ static int bcm47xx_get_invariants(struct
+ return 0;
+ }
+
++#ifdef CONFIG_SERIAL_8250
++static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
++{
++ int i;
++
++ for (i = 0; i < mcore->nr_serial_ports; i++) {
++ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++ struct uart_port s;
++
++ memset(&s, 0, sizeof(s));
++ s.line = i;
++ s.mapbase = (unsigned int) port->regs;
++ s.membase = port->regs;
++ s.irq = port->irq + 2;
++ s.uartclk = port->baud_base;
++ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++ s.iotype = SERIAL_IO_MEM;
++ s.regshift = port->reg_shift;
++
++ early_serial_setup(&s);
++ }
++ printk(KERN_DEBUG "Serial init done.\n");
++}
++#endif
++
+ void __init plat_mem_setup(void)
+ {
+ int err;
+@@ -191,6 +218,10 @@ void __init plat_mem_setup(void)
+ }
+ }
+
++#ifdef CONFIG_SERIAL_8250
++ bcm47xx_early_serial_setup(mcore);
++#endif
++
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
--- /dev/null
+From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig | 1 -
+ arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------
+ 2 files changed, 6 insertions(+), 77 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -101,7 +101,6 @@ config BCM47XX
+ select SSB_B43_PCI_BRIDGE if PCI
+ select SSB_PCICORE_HOSTMODE if PCI
+ select GENERIC_GPIO
+- select SYS_HAS_EARLY_PRINTK
+ select CFE
+ help
+ Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -31,96 +31,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ return "Broadcom BCM47XX";
+ }
+
+-void prom_putchar(char c)
+-{
+- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+- ;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ uint32_t cfe_ept;
+ uint32_t cfe_handle;
+ uint32_t cfe_eptseal;
+- int argc = fw_arg0;
+- char **envp = (char **) fw_arg2;
+- int *prom_vec = (int *) fw_arg3;
+-
+- /*
+- * Check if a loader was used; if NOT, the 4 arguments are
+- * what CFE gives us (handle, 0, EPT and EPTSEAL)
+- */
+- if (argc < 0) {
+- cfe_handle = (uint32_t)argc;
+- cfe_ept = (uint32_t)envp;
+- cfe_eptseal = (uint32_t)prom_vec;
+- } else {
+- if ((int)prom_vec < 0) {
+- /*
+- * Old loader; all it gives us is the handle,
+- * so use the "known" entrypoint and assume
+- * the seal.
+- */
+- cfe_handle = (uint32_t)prom_vec;
+- cfe_ept = 0xBFC00500;
+- cfe_eptseal = CFE_EPTSEAL;
+- } else {
+- /*
+- * Newer loaders bundle the handle/ept/eptseal
+- * Note: prom_vec is in the loader's useg
+- * which is still alive in the TLB.
+- */
+- cfe_handle = prom_vec[0];
+- cfe_ept = prom_vec[2];
+- cfe_eptseal = prom_vec[3];
+- }
+- }
++
++ cfe_eptseal = (uint32_t) fw_arg3;
++ cfe_handle = (uint32_t) fw_arg0;
++ cfe_ept = (uint32_t) fw_arg2;
+
+ if (cfe_eptseal != CFE_EPTSEAL) {
+- /* too early for panic to do any good */
+ printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+- while (1) ;
++ return -1;
+ }
+
+ cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+- /* Initialize CFE console */
+- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+- static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+- /* Get the kernel command line from CFE */
+- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+- buf[COMMAND_LINE_SIZE - 1] = 0;
+- strcpy(arcs_cmdline, buf);
+- }
+-
+- /* Force a console handover by adding a console= argument if needed,
+- * as CFE is not available anymore later in the boot process. */
+- if ((strstr(arcs_cmdline, "console=")) == NULL) {
+- /* Try to read the default serial port used by CFE */
+- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+- || (strncmp("uart", buf, 4)))
+- /* Default to uart0 */
+- strcpy(buf, "uart0");
+-
+- /* Compute the new command line */
+- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+- arcs_cmdline, buf[4]);
+- }
++ return 0;
+ }
+
+ static __init void prom_init_mem(void)
+@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ prom_init_cfe();
+- prom_init_console();
+- prom_init_cmdline();
+ prom_init_mem();
+ }
+
--- /dev/null
+--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
++++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
+@@ -39,8 +39,15 @@ extern int nvram_getenv(char *name, char
+
+ static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+ {
+- sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+- &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
++ if (strchr(buf, ':')) {
++ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
++ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
++ } else if (strchr(buf, '-')) {
++ sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], &macaddr[1],
++ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
++ } else {
++ printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
++ }
+ }
+
+ #endif
--- /dev/null
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,14 +121,6 @@
+ #endif
+ .endm
+
+-#ifndef CONFIG_NO_EXCEPT_FILL
+- /*
+- * Reserved space for exception handlers.
+- * Necessary for machines which link their kernels at KSEG0.
+- */
+- .fill 0x400
+-#endif
+-
+ EXPORT(_stext)
+
+ #ifdef CONFIG_BOOT_RAW
+@@ -141,6 +133,14 @@ FEXPORT(__kernel_entry)
+ j kernel_entry
+ #endif
+
++#ifndef CONFIG_NO_EXCEPT_FILL
++ /*
++ * Reserved space for exception handlers.
++ * Necessary for machines which link their kernels at KSEG0.
++ */
++ .fill 0x400
++#endif
++
+ #ifdef CONFIG_IMAGE_CMDLINE_HACK
+ .ascii "CMDLINE:"
+ EXPORT(__image_cmdline)
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -86,6 +86,7 @@ config ATH79
+
+ config BCM47XX
+ bool "Broadcom BCM47XX based boards"
++ select BOOT_RAW
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
--- /dev/null
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -215,6 +215,19 @@ config USB_OXU210HP_HCD
+ To compile this driver as a module, choose M here: the
+ module will be called oxu210hp-hcd.
+
++config USB_EHCI_HCD_SSB
++ bool "EHCI support for Broadcom SSB EHCI core"
++ depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
++ default n
++ ---help---
++ Support for the Sonics Silicon Backplane (SSB) attached
++ Broadcom USB EHCI core.
++
++ This device is present in some embedded devices with
++ Broadcom based SSB bus.
++
++ If unsure, say N.
++
+ config USB_ISP116X_HCD
+ tristate "ISP116X HCD support"
+ depends on USB
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1265,9 +1265,14 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER tegra_ehci_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++#include "ehci-ssb.c"
++#define SSB_EHCI_DRIVER ssb_ehci_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+- !defined(XILINX_OF_PLATFORM_DRIVER)
++ !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(SSB_EHCI_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+ #endif
+
+@@ -1327,10 +1332,20 @@ static int __init ehci_hcd_init(void)
+ if (retval < 0)
+ goto clean4;
+ #endif
++
++#ifdef SSB_EHCI_DRIVER
++ retval = ssb_driver_register(&SSB_EHCI_DRIVER);
++ if (retval < 0)
++ goto clean5;
++#endif
+ return retval;
+
++#ifdef SSB_EHCI_DRIVER
++ /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
++clean5:
++#endif
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+- /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
++ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
+ clean4:
+ #endif
+ #ifdef OF_PLATFORM_DRIVER
+@@ -1361,6 +1376,9 @@ module_init(ehci_hcd_init);
+
+ static void __exit ehci_hcd_cleanup(void)
+ {
++#ifdef SSB_EHCI_DRIVER
++ ssb_driver_unregister(&SSB_EHCI_DRIVER);
++#endif
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
+ #endif
+--- /dev/null
++++ b/drivers/usb/host/ehci-ssb.c
+@@ -0,0 +1,255 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom USB-core EHCI driver (SSB bus glue)
++ *
++ * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the OHCI-SSB driver
++ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ *
++ * Derived from the EHCI-PCI driver
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/ssb/ssb.h>
++
++
++struct ssb_ehci_device {
++ struct ehci_hcd ehci; /* _must_ be at the beginning. */
++};
++
++static inline
++struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
++{
++ return (struct ssb_ehci_device *)(hcd->hcd_priv);
++}
++
++static int ssb_ehci_reset(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int err;
++
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++
++ dbg_hcs_params(ehci, "reset");
++ dbg_hcc_params(ehci, "reset");
++
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++ err = ehci_halt(ehci);
++
++ if (err)
++ return err;
++
++ err = ehci_init(hcd);
++
++ if (err)
++ return err;
++
++ ehci_reset(ehci);
++
++ return err;
++}
++
++static const struct hc_driver ssb_ehci_hc_driver = {
++ .description = "ssb-usb-ehci",
++ .product_desc = "SSB EHCI Controller",
++ .hcd_priv_size = sizeof(struct ssb_ehci_device),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ssb_ehci_reset,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++ .endpoint_reset = ehci_endpoint_reset,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#if defined(CONFIG_PM)
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++
++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++static void ssb_ehci_detach(struct ssb_device *dev)
++{
++ struct usb_hcd *hcd = ssb_get_drvdata(dev);
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++ ssb_device_disable(dev, 0);
++}
++
++static int ssb_ehci_attach(struct ssb_device *dev)
++{
++ struct ssb_ehci_device *ehcidev;
++ struct usb_hcd *hcd;
++ int err = -ENOMEM;
++ u32 tmp;
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ /*
++ * USB 2.0 special considerations:
++ *
++ * In addition to the standard SSB reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various phy
++ * components out of reset.
++ */
++ ssb_device_enable(dev, 0);
++ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ tmp = ssb_read32(dev, 0x400);
++ tmp &= ~8;
++ ssb_write32(dev, 0x400, tmp);
++ tmp = ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ tmp = ssb_read32(dev, 0x304);
++ tmp &= ~0x100;
++ ssb_write32(dev, 0x304, tmp);
++ tmp = ssb_read32(dev, 0x304);
++
++ udelay(1);
++
++ /* Work around for 5354 failures */
++ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
++ /* Change syn01 reg */
++ tmp = 0x00fe00fe;
++ ssb_write32(dev, 0x894, tmp);
++
++ /* Change syn03 reg */
++ tmp = ssb_read32(dev, 0x89c);
++ tmp |= 0x1;
++ ssb_write32(dev, 0x89c, tmp);
++ }
++
++ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
++ dev_name(dev->dev));
++ if (!hcd)
++ goto err_dev_disable;
++
++ ehcidev = hcd_to_ssb_ehci(hcd);
++ tmp = ssb_read32(dev, SSB_ADMATCH0);
++ hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
++ hcd->rsrc_len = 0x100; /* ehci reg block size */
++ /*
++ * start & size modified per sbutils.c
++ */
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_put_hcd;
++ err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ ssb_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_put_hcd:
++ usb_put_hcd(hcd);
++err_dev_disable:
++ ssb_device_disable(dev, 0);
++ return err;
++}
++
++static int ssb_ehci_probe(struct ssb_device *dev,
++ const struct ssb_device_id *id)
++{
++ int err;
++ u16 chipid_top;
++
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (dev->bus->chip_id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ err = ssb_ehci_attach(dev);
++
++ return err;
++}
++
++static void ssb_ehci_remove(struct ssb_device *dev)
++{
++ ssb_ehci_detach(dev);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
++{
++ ssb_device_disable(dev, 0);
++
++ return 0;
++}
++
++static int ssb_ehci_resume(struct ssb_device *dev)
++{
++ struct usb_hcd *hcd = ssb_get_drvdata(dev);
++ struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
++
++ ssb_device_enable(dev, 0);
++
++ ehci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_ehci_suspend NULL
++#define ssb_ehci_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct ssb_device_id ssb_ehci_table[] = {
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
++ SSB_DEVTABLE_END
++};
++MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
++
++static struct ssb_driver ssb_ehci_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = ssb_ehci_table,
++ .probe = ssb_ehci_probe,
++ .remove = ssb_ehci_remove,
++ .suspend = ssb_ehci_suspend,
++ .resume = ssb_ehci_resume,
++};
--- /dev/null
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -17,6 +17,8 @@
+ */
+ #include <linux/ssb/ssb.h>
+
++extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
++extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
+
+ #define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+
+@@ -24,6 +26,9 @@ struct ssb_ohci_device {
+ struct ohci_hcd ohci; /* _must_ be at the beginning. */
+
+ u32 enable_flags;
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++ struct usb_hcd *ehci_hcd;
++#endif
+ };
+
+ static inline
+@@ -92,6 +97,9 @@ static const struct hc_driver ssb_ohci_h
+ static void ssb_ohci_detach(struct ssb_device *dev)
+ {
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
++#endif
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+@@ -99,6 +107,14 @@ static void ssb_ohci_detach(struct ssb_d
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
++
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++ /*
++ * Also detach ehci function
++ */
++ if (dev->id.coreid == SSB_DEV_USB20_HOST)
++ ssb_ehci_detach(dev, ohcidev->ehci_hcd);
++#endif
+ ssb_device_disable(dev, 0);
+ }
+
+@@ -121,6 +137,9 @@ static int ssb_ohci_attach(struct ssb_de
+ /*
+ * USB 2.0 special considerations:
+ *
++ * Since the core supports both OHCI and EHCI functions,
++ * it must only be reset once.
++ *
+ * In addition to the standard SSB reset sequence, the Host
+ * Control Register must be programmed to bring the USB core
+ * and various phy components out of reset.
+@@ -175,6 +194,14 @@ static int ssb_ohci_attach(struct ssb_de
+
+ ssb_set_drvdata(dev, hcd);
+
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++ /*
++ * attach ehci function in this core
++ */
++ if (dev->id.coreid == SSB_DEV_USB20_HOST)
++ err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
++#endif
++
+ return err;
+
+ err_iounmap:
+--- a/drivers/usb/host/ehci-ssb.c
++++ b/drivers/usb/host/ehci-ssb.c
+@@ -106,10 +106,18 @@ static void ssb_ehci_detach(struct ssb_d
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
++#ifndef CONFIG_USB_OHCI_HCD_SSB
++ ssb_device_disable(dev, 0);
++#endif
+ ssb_device_disable(dev, 0);
+ }
++EXPORT_SYMBOL_GPL(ssb_ehci_detach);
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ static int ssb_ehci_attach(struct ssb_device *dev)
++#else
++static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
++#endif
+ {
+ struct ssb_ehci_device *ehcidev;
+ struct usb_hcd *hcd;
+@@ -120,6 +128,7 @@ static int ssb_ehci_attach(struct ssb_de
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ /*
+ * USB 2.0 special considerations:
+ *
+@@ -155,6 +164,7 @@ static int ssb_ehci_attach(struct ssb_de
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
+ }
++#endif
+
+ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
+ dev_name(dev->dev));
+@@ -175,7 +185,11 @@ static int ssb_ehci_attach(struct ssb_de
+ if (err)
+ goto err_iounmap;
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ ssb_set_drvdata(dev, hcd);
++#else
++ *ehci_hcd = hcd;
++#endif
+
+ return err;
+
+@@ -187,7 +201,9 @@ err_dev_disable:
+ ssb_device_disable(dev, 0);
+ return err;
+ }
++EXPORT_SYMBOL_GPL(ssb_ehci_attach);
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ static int ssb_ehci_probe(struct ssb_device *dev,
+ const struct ssb_device_id *id)
+ {
+@@ -238,6 +254,7 @@ static int ssb_ehci_resume(struct ssb_de
+ #define ssb_ehci_suspend NULL
+ #define ssb_ehci_resume NULL
+ #endif /* CONFIG_PM */
++#endif /* !CONFIG_USB_OHCI_HCD_SSB */
+
+ static const struct ssb_device_id ssb_ehci_table[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+@@ -245,6 +262,8 @@ static const struct ssb_device_id ssb_eh
+ };
+ MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
+
++
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ static struct ssb_driver ssb_ehci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ssb_ehci_table,
+@@ -253,3 +272,4 @@ static struct ssb_driver ssb_ehci_driver
+ .suspend = ssb_ehci_suspend,
+ .resume = ssb_ehci_resume,
+ };
++#endif
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1333,17 +1333,21 @@ static int __init ehci_hcd_init(void)
+ goto clean4;
+ #endif
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ #ifdef SSB_EHCI_DRIVER
+ retval = ssb_driver_register(&SSB_EHCI_DRIVER);
+ if (retval < 0)
+ goto clean5;
+ #endif
++#endif /* !CONFIG_USB_OHCI_HCD_SSB */
+ return retval;
+
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ #ifdef SSB_EHCI_DRIVER
+ /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
+ clean5:
+ #endif
++#endif /* !CONFIG_USB_OHCI_HCD_SSB */
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
+ clean4:
+@@ -1376,9 +1380,11 @@ module_init(ehci_hcd_init);
+
+ static void __exit ehci_hcd_cleanup(void)
+ {
++#ifndef CONFIG_USB_OHCI_HCD_SSB
+ #ifdef SSB_EHCI_DRIVER
+ ssb_driver_unregister(&SSB_EHCI_DRIVER);
+ #endif
++#endif /* !CONFIG_USB_OHCI_HCD_SSB */
+ #ifdef XILINX_OF_PLATFORM_DRIVER
+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
+ #endif
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom =
+ .boardflags_lo = 0x2848,
+ .boardflags_hi = 0x0000,
+ };
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++ if (bus->bustype == SSB_BUSTYPE_PCI) {
++ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++ return 0;
++ } else {
++ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++ return -EINVAL;
++ }
++}
+ #endif
+
+ /*
+@@ -793,8 +804,9 @@ void __init board_prom_init(void)
+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+- printk(KERN_ERR "failed to register fallback SPROM\n");
++ if (ssb_arch_register_fallback_sprom(
++ &bcm63xx_get_fallback_sprom) < 0)
++ printk(KERN_ERR PFX "failed to register fallback SPROM\n");
+ }
+ #endif
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus
+ static int ssb_pci_sprom_get(struct ssb_bus *bus,
+ struct ssb_sprom *sprom)
+ {
+- const struct ssb_sprom *fallback;
+ int err;
+ u16 *buf;
+
+@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_
+ if (err) {
+ /* All CRC attempts failed.
+ * Maybe there is no SPROM on the device?
+- * If we have a fallback, use that. */
+- fallback = ssb_get_fallback_sprom();
+- if (fallback) {
+- memcpy(sprom, fallback, sizeof(*sprom));
++ * Now we ask the arch code if there is some sprom
++ * avaliable for this device in some other storage */
++ err = ssb_fill_sprom_with_fallback(bus, sprom);
++ if (err) {
++ ssb_printk(KERN_WARNING PFX "WARNING: Using"
++ " fallback SPROM failed (err %d)\n",
++ err);
++ } else {
++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
++ " revision %d provided by"
++ " platform.\n", sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -17,7 +17,7 @@
+ #include <linux/slab.h>
+
+
+-static const struct ssb_sprom *fallback_sprom;
++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
+
+
+ static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
+@@ -145,13 +145,14 @@ out:
+ }
+
+ /**
+- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
++ * ssb_arch_register_fallback_sprom - Registers a method providing a fallback
++ * SPROM if no SPROM is found.
+ *
+- * @sprom: The SPROM data structure to register.
++ * @sprom_callback: The callbcak function.
+ *
+- * With this function the architecture implementation may register a fallback
+- * SPROM data structure. The fallback is only used for PCI based SSB devices,
+- * where no valid SPROM can be found in the shadow registers.
++ * With this function the architecture implementation may register a callback
++ * handler which wills the SPROM data structure. The fallback is only used for
++ * PCI based SSB devices, where no valid SPROM can be found in the shadow registers.
+ *
+ * This function is useful for weird architectures that have a half-assed SSB device
+ * hardwired to their PCI bus.
+@@ -163,18 +164,21 @@ out:
+ *
+ * This function is available for architecture code, only. So it is not exported.
+ */
+-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out))
+ {
+- if (fallback_sprom)
++ if (get_fallback_sprom)
+ return -EEXIST;
+- fallback_sprom = sprom;
++ get_fallback_sprom = sprom_callback;
+
+ return 0;
+ }
+
+-const struct ssb_sprom *ssb_get_fallback_sprom(void)
++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+- return fallback_sprom;
++ if (!get_fallback_sprom)
++ return -ENOENT;
++
++ return get_fallback_sprom(bus, out);
+ }
+
+ /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -171,7 +171,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
+-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out);
+
+
+ /* core.c */
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc
+
+ /* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
++extern int ssb_arch_register_fallback_sprom(
++ int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out));
+
+ /* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
--- /dev/null
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -59,10 +59,23 @@ static void bcm47xx_machine_halt(void)
+ }
+
+ #define READ_FROM_NVRAM(_outvar, name, buf) \
+- if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
++ if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
++static inline int nvram_getprefix(const char *prefix, char *name,
++ char *buf, int len)
++{
++ if (prefix) {
++ char key[100];
++
++ snprintf(key, sizeof(key), "%s%s", prefix, name);
++ return nvram_getenv(key, buf, len);
++ }
++
++ return nvram_getenv(name, buf, len);
++}
++
++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
+ {
+ char buf[100];
+ u32 boardflags;
+@@ -71,11 +84,11 @@ static void bcm47xx_fill_sprom(struct ss
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+- if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
++ if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->il0mac);
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
++ if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et0mac);
+- if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
++ if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et1mac);
+ READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+@@ -127,14 +140,14 @@ static void bcm47xx_fill_sprom(struct ss
+ READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+ READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+- if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
++ if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
+ }
+- if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
++ if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+@@ -160,7 +173,7 @@ static int bcm47xx_get_invariants(struct
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+
+- bcm47xx_fill_sprom(&iv->sprom);
++ bcm47xx_fill_sprom(&iv->sprom, NULL);
+
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
--- /dev/null
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -3,6 +3,7 @@
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -23,7 +24,7 @@
+ static char nvram_buf[NVRAM_SPACE];
+
+ /* Probe for NVRAM header */
+-static void __init early_nvram_init(void)
++static void early_nvram_init(void)
+ {
+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ struct nvram_header *header;
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -3,6 +3,7 @@
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
++ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -156,6 +157,22 @@ static void bcm47xx_fill_sprom(struct ss
+ }
+ }
+
++int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++ char prefix[10];
++
++ if (bus->bustype == SSB_BUSTYPE_PCI) {
++ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
++ bus->host_pci->bus->number + 1,
++ PCI_SLOT(bus->host_pci->devfn));
++ bcm47xx_fill_sprom(out, prefix);
++ return 0;
++ } else {
++ printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
++ return -EINVAL;
++ }
++}
++
+ static int bcm47xx_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv)
+ {
+@@ -212,6 +229,11 @@ void __init plat_mem_setup(void)
+ char buf[100];
+ struct ssb_mipscore *mcore;
+
++ err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom);
++ if (err)
++ printk(KERN_WARNING "bcm47xx: someone else already registered"
++ " a ssb SPROM callback handler (err %d)\n", err);
++
+ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+ bcm47xx_get_invariants);
+ if (err)
--- /dev/null
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -63,6 +63,11 @@ static void bcm47xx_machine_halt(void)
+ if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
++#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \
++ if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \
++ nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\
++ sprom->_outvar = simple_strtoul(buf, NULL, 0);
++
+ static inline int nvram_getprefix(const char *prefix, char *name,
+ char *buf, int len)
+ {
+@@ -76,6 +81,27 @@ static inline int nvram_getprefix(const
+ return nvram_getenv(name, buf, len);
+ }
+
++static u32 nvram_getu32(const char *name, char *buf, int len)
++{
++ int rv;
++ char key[100];
++ u16 var0, var1;
++
++ snprintf(key, sizeof(key), "%s0", name);
++ rv = nvram_getenv(key, buf, len);
++ /* return 0 here so this looks like unset */
++ if (rv < 0)
++ return 0;
++ var0 = simple_strtoul(buf, NULL, 0);
++
++ snprintf(key, sizeof(key), "%s1", name);
++ rv = nvram_getenv(key, buf, len);
++ if (rv < 0)
++ return 0;
++ var1 = simple_strtoul(buf, NULL, 0);
++ return var1 << 16 | var0;
++}
++
+ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
+ {
+ char buf[100];
+@@ -85,7 +111,8 @@ static void bcm47xx_fill_sprom(struct ss
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+- if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0)
++ if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 ||
++ nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->il0mac);
+ if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et0mac);
+@@ -111,20 +138,36 @@ static void bcm47xx_fill_sprom(struct ss
+ READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+ READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+ READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+- READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+- READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+- READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+- READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+- READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+- READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+- READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+- READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+- READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+- READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
++ READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf);
++ READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf);
++ READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf);
++ READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf);
++ READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf);
++ READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf);
++ READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf);
++ READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf);
++ READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf);
++ READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf);
+ READ_FROM_NVRAM(tri2g, "tri2g", buf);
+ READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+ READ_FROM_NVRAM(tri5g, "tri5g", buf);
+ READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
++ READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf);
++ READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf);
++ READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf);
++ READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf);
++ READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf);
++ READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf);
++ READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf);
++ READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf);
++ READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf);
++ READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf);
++ READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf);
++ READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf);
++ READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf);
++ READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf);
++ READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf);
++ READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf);
+ READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+ READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+ READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+@@ -136,10 +179,18 @@ static void bcm47xx_fill_sprom(struct ss
+ READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+ READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+ READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+- READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+- READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+- READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+- READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
++
++ sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf));
++ sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf));
++ sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf));
++ sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf));
++
++ READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf);
++ READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf);
++ READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf);
++ READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf);
++ memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24,
++ sizeof(sprom->antenna_gain.ghz5));
+
+ if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
--- /dev/null
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -58,6 +58,10 @@ static inline int gpio_polarity(unsigned
+ return 0;
+ }
+
++static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
++{
++ return -ENOSYS;
++}
+
+ /* cansleep wrappers */
+ #include <asm-generic/gpio.h>
--- /dev/null
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -328,6 +328,12 @@ config MTD_CFI_FLAGADM
+ Mapping for the Flaga digital module. If you don't have one, ignore
+ this setting.
+
++config MTD_BCM47XX
++ tristate "BCM47xx flash device"
++ depends on MIPS && MTD_CFI && BCM47XX
++ help
++ Support for the flash chips on the BCM947xx board.
++
+ config MTD_SOLUTIONENGINE
+ tristate "CFI Flash device mapped on Hitachi SolutionEngine"
+ depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcms
+ obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
+ obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
++obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o
+ obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
+ obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
+ obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o
--- /dev/null
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -17,6 +17,20 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsmtregs.h>
+
++#ifdef CONFIG_BCM47XX
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++
++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations. Two issues here:
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ __dflush_epilogue
+ }
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, addr);
+ __dflush_epilogue
+ }
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+ __dflush_prologue
++ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Invalidate_D, addr);
+ __dflush_epilogue
+ }
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+ */
+ static inline void protected_flush_icache_line(unsigned long addr)
+ {
++ BCM4710_DUMMY_RREG();
+ protected_cache_op(Hit_Invalidate_I, addr);
+ }
+
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+ */
+ static inline void protected_writeback_dcache_line(unsigned long addr)
+ {
++ BCM4710_DUMMY_RREG();
+ protected_cache_op(Hit_Writeback_Inv_D, addr);
+ }
+
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+ : "r" (base), \
+ "i" (op));
+
++static inline void blast_dcache(void)
++{
++ unsigned long start = KSEG0;
++ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++ unsigned long end = (start + dcache_size);
++
++ do {
++ BCM4710_DUMMY_RREG();
++ cache_op(Index_Writeback_Inv_D, start);
++ start += current_cpu_data.dcache.linesz;
++ } while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++ unsigned long start = page;
++ unsigned long end = start + PAGE_SIZE;
++
++ BCM4710_FILL_TLB(start);
++ do {
++ BCM4710_DUMMY_RREG();
++ cache_op(Hit_Writeback_Inv_D, start);
++ start += current_cpu_data.dcache.linesz;
++ } while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++ unsigned long start = page;
++ unsigned long end = start + PAGE_SIZE;
++ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++ unsigned long ws_end = current_cpu_data.dcache.ways <<
++ current_cpu_data.dcache.waybit;
++ unsigned long ws, addr;
++ for (ws = 0; ws < ws_end; ws += ws_inc) {
++ start = page + ws;
++ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++ BCM4710_DUMMY_RREG();
++ cache_op(Index_Writeback_Inv_D, addr);
++ }
++ }
++}
++
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
+ static inline void blast_##pfx##cache##lsize(void) \
+ { \
+ unsigned long start = INDEX_BASE; \
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+ \
+ __##pfx##flush_prologue \
+ \
++ war \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws, indexop); \
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+ \
+ __##pfx##flush_prologue \
+ \
++ war \
+ do { \
+ cache##lsize##_unroll32(start, hitop); \
+ start += lsize * 32; \
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
++ war \
++ \
+ __##pfx##flush_prologue \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
+ __##pfx##flush_epilogue \
+ }
+
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
+ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ unsigned long end) \
+ { \
+ unsigned long lsize = cpu_##desc##_line_size(); \
+ unsigned long addr = start & ~(lsize - 1); \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
++ war \
+ \
+ __##pfx##flush_prologue \
+ \
+ while (1) { \
++ war2 \
+ prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
+ __##pfx##flush_epilogue \
+ }
+
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
+
+ #endif /* _ASM_R4KCACHE_H */
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -449,6 +449,10 @@
+ .macro RESTORE_SP_AND_RET
+ LONG_L sp, PT_R29(sp)
+ .set mips3
++#ifdef CONFIG_BCM47XX
++ nop
++ nop
++#endif
+ eret
+ .set mips0
+ .endm
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
+ NESTED(except_vec3_generic, 0, sp)
+ .set push
+ .set noat
++#ifdef CONFIG_BCM47XX
++ nop
++ nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+ mfc0 k0, CP0_INDEX
+ #endif
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -35,6 +35,9 @@
+ #include <asm/cacheflush.h> /* for run_uncached() */
+
+
++/* For enabling BCM4710 cache workarounds */
++int bcm4710 = 0;
++
+ /*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache_page = blast_dcache_page;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
++ if (bcm4710)
++ r4k_blast_dcache = blast_dcache;
++ else
+ if (dc_lsize == 0)
+ r4k_blast_dcache = (void *)cache_noop;
+ else if (dc_lsize == 16)
+@@ -679,6 +691,8 @@ static void local_r4k_flush_cache_sigtra
+ unsigned long addr = (unsigned long) arg;
+
+ R4600_HIT_CACHEOP_WAR_IMPL;
++ BCM4710_PROTECTED_FILL_TLB(addr);
++ BCM4710_PROTECTED_FILL_TLB(addr + 4);
+ if (dc_lsize)
+ protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ if (!cpu_icache_snoops_remote_store && scache_size)
+@@ -1308,6 +1322,17 @@ static void __cpuinit coherency_setup(vo
+ * silly idea of putting something else there ...
+ */
+ switch (current_cpu_type()) {
++ case CPU_BMIPS3300:
++ {
++ u32 cm;
++ cm = read_c0_diag();
++ /* Enable icache */
++ cm |= (1 << 31);
++ /* Enable dcache */
++ cm |= (1 << 30);
++ write_c0_diag(cm);
++ }
++ break;
+ case CPU_R4000PC:
+ case CPU_R4000SC:
+ case CPU_R4000MC:
+@@ -1364,6 +1389,15 @@ void __cpuinit r4k_cache_init(void)
+ break;
+ }
+
++ /* Check if special workarounds are required */
++#ifdef CONFIG_BCM47XX
++ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++ printk("Enabling BCM4710A0 cache workarounds.\n");
++ bcm4710 = 1;
++ } else
++#endif
++ bcm4710 = 0;
++
+ probe_pcache();
+ setup_scache();
+
+@@ -1422,5 +1456,13 @@ void __cpuinit r4k_cache_init(void)
+ #if !defined(CONFIG_MIPS_CMP)
+ local_r4k___flush_cache_all(NULL);
+ #endif
++#ifdef CONFIG_BCM47XX
++ {
++ static void (*_coherency_setup)(void);
++ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++ _coherency_setup();
++ }
++#else
+ coherency_setup();
++#endif
+ }
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -1187,6 +1187,9 @@ static void __cpuinit build_r4000_tlb_re
+ /* No need for uasm_i_nop */
+ }
+
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
+@@ -1706,6 +1709,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ struct uasm_reloc **r, unsigned int pte,
+ unsigned int ptr)
+ {
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
+ #else
--- /dev/null
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -110,6 +110,9 @@
+ #ifndef cpu_has_pindexed_dcache
+ #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+
+ /*
+ * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -0,0 +1,13 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
++ */
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_use_kmap_coherent 0
++
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
+ */
+ map_coherent = (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page));
+- if (map_coherent)
++ if (map_coherent && cpu_use_kmap_coherent)
+ vaddr = kmap_coherent(page, addr);
+ else
+ vaddr = kmap_atomic(page, KM_USER0);
+@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
+ }
+
+ if (vaddr) {
+- if (map_coherent)
++ if (map_coherent && cpu_use_kmap_coherent)
+ kunmap_coherent();
+ else
+ kunmap_atomic(vaddr, KM_USER0);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -210,7 +210,7 @@ void copy_user_highpage(struct page *to,
+ void *vfrom, *vto;
+
+ vto = kmap_atomic(to, KM_USER1);
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(from) && !Page_dcache_dirty(from)) {
+ vfrom = kmap_coherent(from, vaddr);
+ copy_page(vto, vfrom);
+@@ -232,7 +232,7 @@ void copy_to_user_page(struct vm_area_st
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+ {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ memcpy(vto, src, len);
+@@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+ {
+- if (cpu_has_dc_aliases &&
++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ memcpy(dst, vfrom, len);
--- /dev/null
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru
+ error:
+ pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static inline int startswith (const char *source, const char *cmp)
++{
++ return !strncmp(source,cmp,strlen(cmp));
++}
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++ char buf[20];
++ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++ if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
++ return;
++ if (simple_strtoul(buf, NULL, 0) == 100) {
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ } else {
++ /* WL-HDD */
++ struct ssb_device *sdev = bp->sdev;
++ if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
++ return;
++ if (startswith(buf, "WL300-")) {
++ if (sdev->bus->sprom.et0phyaddr == 0 &&
++ sdev->bus->sprom.et1phyaddr == 1)
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ }
++ }
++ return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+
+ static int b44_setup_phy(struct b44 *bp)
+@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp)
+ int err;
+
+ b44_wap54g10_workaround(bp);
++ b44_bcm47xx_workarounds(bp);
+
+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ return 0;
+@@ -2088,6 +2120,8 @@ static int __devinit b44_get_invariants(
+ * valid PHY address. */
+ bp->phy_addr &= 0x1F;
+
++ b44_bcm47xx_workarounds(bp);
++
+ memcpy(bp->dev->dev_addr, addr, 6);
+
+ if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
--- /dev/null
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
+ udelay(10);
+ }
+ if (i == timeout) {
++#if 0
+ if (net_ratelimit())
+ netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
+ bit, reg, clear ? "clear" : "set");
+-
++#endif
+ return -ENODEV;
+ }
+ return 0;
--- /dev/null
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -285,6 +285,8 @@ void ssb_chipco_resume(struct ssb_chipco
+ void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+ {
++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++ return;
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+@@ -308,6 +310,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+ {
++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++ return;
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -217,6 +217,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+
+ if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
+ rate = 200000000;
++ } else if (bus->chip_id == 0x5354) {
++ rate = 240000000;
+ } else {
+ rate = ssb_calc_clock_rate(pll_type, n, m);
+ }
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1103,6 +1103,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+
+ if (bus->chip_id == 0x5365) {
+ rate = 100000000;
++ } else if (bus->chip_id == 0x5354) {
++ rate = 120000000;
+ } else {
+ rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
+ if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
--- /dev/null
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -141,6 +141,8 @@ config SSB_DRIVER_MIPS
+ config SSB_EMBEDDED
+ bool
+ depends on SSB_DRIVER_MIPS
++ select USB_EHCI_HCD_SSB if USB_EHCI_HCD
++ select USB_OHCI_HCD_SSB if USB_OHCI_HCD
+ default y
+
+ config SSB_DRIVER_EXTIF
--- /dev/null
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -32,7 +32,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
--- /dev/null
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
+ }
+ }
+
+-static void r4k___flush_cache_all(void)
++void r4k___flush_cache_all(void)
+ {
+ r4k_on_each_cpu(local_r4k___flush_cache_all, NULL);
+ }
+@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
+ }
+ }
+
+-static void r4k_flush_cache_page(struct vm_area_struct *vma,
++void r4k_flush_cache_page(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
+ {
+ struct flush_cache_page_args args;
+@@ -1466,3 +1466,7 @@ void __cpuinit r4k_cache_init(void)
+ coherency_setup();
+ #endif
+ }
++
++/* fuse package DCACHE BUG patch exports */
++void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
++EXPORT_SYMBOL(fuse_flush_cache_all);
--- /dev/null
+--- a/fs/fuse/dev.c
++++ b/fs/fuse/dev.c
+@@ -647,11 +647,20 @@ static int fuse_copy_fill(struct fuse_co
+ return lock_request(cs->fc, cs->req);
+ }
+
++#ifdef DCACHE_BUG
++extern void (*fuse_flush_cache_all)(void);
++#endif
++
+ /* Do as much copy to/from userspace buffer as we can */
+ static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
+ {
+ unsigned ncpy = min(*size, cs->len);
+ if (val) {
++#ifdef DCACHE_BUG
++ // patch from mailing list, it is very important, otherwise,
++ // can't mount, or ls mount point will hang
++ fuse_flush_cache_all();
++#endif
+ if (cs->write)
+ memcpy(cs->buf, *val, ncpy);
+ else
+--- a/fs/fuse/fuse_i.h
++++ b/fs/fuse/fuse_i.h
+@@ -8,6 +8,7 @@
+
+ #ifndef _FS_FUSE_I_H
+ #define _FS_FUSE_I_H
++#define DCACHE_BUG
+
+ #include <linux/fuse.h>
+ #include <linux/fs.h>
+--- a/fs/fuse/inode.c
++++ b/fs/fuse/inode.c
+@@ -1200,6 +1200,10 @@ static int __init fuse_init(void)
+ printk(KERN_INFO "fuse init (API version %i.%i)\n",
+ FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
+
++#ifdef DCACHE_BUG
++ printk("fuse init DCACHE_BUG workaround enabled\n");
++#endif
++
+ INIT_LIST_HEAD(&fuse_conn_list);
+ res = fuse_fs_init();
+ if (res)
--- /dev/null
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -43,6 +43,7 @@
+ #ifndef __ASSEMBLY__
+
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ #include <asm/io.h>
+
+ extern void build_clear_page(void);
+@@ -78,13 +79,16 @@ static inline void clear_user_page(void
+ flush_data_cache_page((unsigned long)addr);
+ }
+
+-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+- struct page *to);
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+- unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++ struct page *to)
++{
++ extern void (*flush_data_cache_page)(unsigned long addr);
+
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++ copy_page(vto, vfrom);
++ if (!cpu_has_ic_fills_f_dc ||
++ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++ flush_data_cache_page((unsigned long)vto);
++}
+
+ /*
+ * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -204,30 +204,6 @@ void kunmap_coherent(void)
+ preempt_check_resched();
+ }
+
+-void copy_user_highpage(struct page *to, struct page *from,
+- unsigned long vaddr, struct vm_area_struct *vma)
+-{
+- void *vfrom, *vto;
+-
+- vto = kmap_atomic(to, KM_USER1);
+- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+- page_mapped(from) && !Page_dcache_dirty(from)) {
+- vfrom = kmap_coherent(from, vaddr);
+- copy_page(vto, vfrom);
+- kunmap_coherent();
+- } else {
+- vfrom = kmap_atomic(from, KM_USER0);
+- copy_page(vto, vfrom);
+- kunmap_atomic(vfrom, KM_USER0);
+- }
+- if ((!cpu_has_ic_fills_f_dc) ||
+- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+- flush_data_cache_page((unsigned long)vto);
+- kunmap_atomic(vto, KM_USER1);
+- /* Make sure this page is cleared on other CPU's too before using it */
+- smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
--- /dev/null
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -93,3 +93,30 @@ int nvram_getenv(char *name, char *val,
+ return NVRAM_ERR_ENVNOTFOUND;
+ }
+ EXPORT_SYMBOL(nvram_getenv);
++
++char *nvram_get(const char *name)
++{
++ char *var, *value, *end, *eq;
++
++ if (!name)
++ return NULL;
++
++ if (!nvram_buf[0])
++ early_nvram_init();
++
++ /* Look for name=value and return value */
++ var = &nvram_buf[sizeof(struct nvram_header)];
++ end = nvram_buf + sizeof(nvram_buf) - 2;
++ end[0] = end[1] = '\0';
++ for (; *var; var = value + strlen(value) + 1) {
++ eq = strchr(var, '=');
++ if (!eq)
++ break;
++ value = eq + 1;
++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++ return value;
++ }
++
++ return NULL;
++}
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -312,3 +312,20 @@ void __init plat_mem_setup(void)
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
+ }
++
++static int __init bcm47xx_register_gpiodev(void)
++{
++ static struct resource res = {
++ .start = 0xFFFFFFFF,
++ };
++ struct platform_device *pdev;
++
++ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
++ if (!pdev) {
++ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++device_initcall(bcm47xx_register_gpiodev);
--- /dev/null
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
+- if (!r->start && r->end) {
+- printk(KERN_ERR "PCI: Device %s not available "
+- "because of resource collisions\n",
++ if (!r->start && r->end)
++ printk(KERN_WARNING "PCI: Device %s resource"
++ "collisions detected. Ignoring...\n",
+ pci_name(dev));
+- return -EINVAL;
+- }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
--- /dev/null
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
+ hw->io_ports.ctl_addr = ctl_addr;
+ }
+
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS 2
++#else
+ #define MAX_HWIFS 10
++#endif
+
+ /*
+ * Now for the data we need to maintain per-drive: ide_drive_t
--- /dev/null
+--- a/drivers/net/tg3.c
++++ b/drivers/net/tg3.c
+@@ -43,6 +43,7 @@
+ #include <linux/prefetch.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/firmware.h>
++#include <linux/ssb/ssb_driver_gige.h>
+
+ #include <net/checksum.h>
+ #include <net/ip.h>
+@@ -488,8 +489,9 @@ static void _tw32_flush(struct tg3 *tp,
+ static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
+ {
+ tp->write32_mbox(tp, off, val);
+- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
++ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
++ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
++ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
+ tp->read32_mbox(tp, off);
+ }
+
+@@ -499,7 +501,7 @@ static void tg3_write32_tx_mbox(struct t
+ writel(val, mbox);
+ if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
+ writel(val, mbox);
+- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
++ if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
+ readl(mbox);
+ }
+
+@@ -782,7 +784,7 @@ static void tg3_switch_clocks(struct tg3
+
+ #define PHY_BUSY_LOOPS 5000
+
+-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -796,7 +798,7 @@ static int tg3_readphy(struct tg3 *tp, i
+
+ *val = 0x0;
+
+- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -831,7 +833,12 @@ static int tg3_readphy(struct tg3 *tp, i
+ return ret;
+ }
+
+-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++{
++ return __tg3_readphy(tp, tp->phy_addr, reg, val);
++}
++
++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -847,7 +854,7 @@ static int tg3_writephy(struct tg3 *tp,
+ udelay(80);
+ }
+
+- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -880,6 +887,11 @@ static int tg3_writephy(struct tg3 *tp,
+ return ret;
+ }
+
++static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++{
++ return __tg3_writephy(tp, tp->phy_addr, reg, val);
++}
++
+ static int tg3_bmcr_reset(struct tg3 *tp)
+ {
+ u32 phy_control;
+@@ -2488,6 +2500,9 @@ static int tg3_nvram_read(struct tg3 *tp
+ {
+ int ret;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ return -ENODEV;
++
+ if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
+ return tg3_nvram_read_using_eeprom(tp, offset, val);
+
+@@ -2812,8 +2827,10 @@ static int tg3_power_down_prepare(struct
+ tg3_frob_aux_power(tp);
+
+ /* Workaround for unstable PLL clock */
+- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
++ if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
++ /* !!! FIXME !!! */
++ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
++ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
+ u32 val = tr32(0x7d00);
+
+ val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
+@@ -3340,6 +3357,14 @@ relink:
+ if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
+ tg3_phy_copper_begin(tp);
+
++ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
++ current_link_up = 1;
++ current_speed = SPEED_1000; /* FIXME */
++ current_duplex = DUPLEX_FULL;
++ tp->link_config.active_speed = current_speed;
++ tp->link_config.active_duplex = current_duplex;
++ }
++
+ tg3_readphy(tp, MII_BMSR, &bmsr);
+ if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
+ (bmsr & BMSR_LSTATUS))
+@@ -6916,6 +6941,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+ int i;
+ u32 val;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ /* Wait up to 20ms for init done. */
+ for (i = 0; i < 200; i++) {
+@@ -7206,6 +7236,14 @@ static int tg3_chip_reset(struct tg3 *tp
+ tw32(0x5000, 0x400);
+ }
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* BCM4785: In order to avoid repercussions from using potentially
++ * defective internal ROM, stop the Rx RISC CPU, which is not
++ * required. */
++ tg3_stop_fw(tp);
++ tg3_halt_cpu(tp, RX_CPU_BASE);
++ }
++
+ tw32(GRC_MODE, tp->grc_mode);
+
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
+@@ -7360,9 +7398,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+ return -ENODEV;
+ }
+
+- /* Clear firmware's nvram arbitration. */
+- if (tp->tg3_flags & TG3_FLAG_NVRAM)
+- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
++ /* Clear firmware's nvram arbitration. */
++ if (tp->tg3_flags & TG3_FLAG_NVRAM)
++ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ }
++
+ return 0;
+ }
+
+@@ -7425,6 +7466,11 @@ static int tg3_load_5701_a0_firmware_fix
+ const __be32 *fw_data;
+ int err, i;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ fw_data = (void *)tp->fw->data;
+
+ /* Firmware blob starts with version numbers, followed by
+@@ -7483,6 +7529,11 @@ static int tg3_load_tso_firmware(struct
+ unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
+ int err, i;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ return 0;
+
+@@ -8701,6 +8752,11 @@ static void tg3_timer(unsigned long __op
+
+ spin_lock(&tp->lock);
+
++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++ /* BCM4785: Flush posted writes from GbE to host memory. */
++ tr32(HOSTCC_MODE);
++ }
++
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ /* All of this garbage is because when using non-tagged
+ * IRQ status the mailbox/status_block protocol the chip
+@@ -10372,6 +10428,11 @@ static int tg3_test_nvram(struct tg3 *tp
+ if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+ return 0;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't have NVRAM. */
++ return 0;
++ }
++
+ if (tg3_nvram_read(tp, 0, &magic) != 0)
+ return -EIO;
+
+@@ -11253,7 +11314,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
++ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
+ spin_unlock_bh(&tp->lock);
+
+ data->val_out = mii_regval;
+@@ -11271,7 +11332,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
++ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_bh(&tp->lock);
+
+ return err;
+@@ -11891,6 +11952,12 @@ static void __devinit tg3_get_5717_nvram
+ /* Chips other than 5700/5701 use the NVRAM for fetching info. */
+ static void __devinit tg3_nvram_init(struct tg3 *tp)
+ {
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
++ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
++ return;
++ }
++
+ tw32_f(GRC_EEPROM_ADDR,
+ (EEPROM_ADDR_FSM_RESET |
+ (EEPROM_DEFAULT_CLOCK_PERIOD <<
+@@ -12154,6 +12221,9 @@ static int tg3_nvram_write_block(struct
+ {
+ int ret;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ return -ENODEV;
++
+ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
+ ~GRC_LCLCTRL_GPIO_OUTPUT1);
+@@ -13615,6 +13685,11 @@ static int __devinit tg3_get_invariants(
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
+ tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+
++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++ tp->write32_tx_mbox = tg3_write_flush_reg32;
++ tp->write32_rx_mbox = tg3_write_flush_reg32;
++ }
++
+ /* Get eeprom hw config before calling tg3_set_power_state().
+ * In particular, the TG3_FLG2_IS_NIC flag must be
+ * determined before calling tg3_set_power_state() so that
+@@ -14012,6 +14087,10 @@ static int __devinit tg3_get_device_addr
+ }
+
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
++ }
++ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ #ifdef CONFIG_SPARC
+ if (!tg3_get_default_macaddr_sparc(tp))
+ return 0;
+@@ -14512,6 +14591,7 @@ static char * __devinit tg3_phy_string(s
+ case TG3_PHY_ID_BCM5704: return "5704";
+ case TG3_PHY_ID_BCM5705: return "5705";
+ case TG3_PHY_ID_BCM5750: return "5750";
++ case TG3_PHY_ID_BCM5750_2: return "5750-2";
+ case TG3_PHY_ID_BCM5752: return "5752";
+ case TG3_PHY_ID_BCM5714: return "5714";
+ case TG3_PHY_ID_BCM5780: return "5780";
+@@ -14715,6 +14795,13 @@ static int __devinit tg3_init_one(struct
+ tp->msg_enable = tg3_debug;
+ else
+ tp->msg_enable = TG3_DEF_MSG_ENABLE;
++ if (pdev_is_ssb_gige_core(pdev)) {
++ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
++ if (ssb_gige_must_flush_posted_writes(pdev))
++ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
++ if (ssb_gige_have_roboswitch(pdev))
++ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
++ }
+
+ /* The word/byte swap controls here control register access byte
+ * swapping. DMA data byte swapping is controlled in the GRC_MODE
+--- a/drivers/net/tg3.h
++++ b/drivers/net/tg3.h
+@@ -2065,6 +2065,9 @@
+ #define NIC_SRAM_RGMII_INBAND_DISABLE 0x00000004
+ #define NIC_SRAM_RGMII_EXT_IBND_RX_EN 0x00000008
+ #define NIC_SRAM_RGMII_EXT_IBND_TX_EN 0x00000010
++#define TG3_FLG3_IS_SSB_CORE 0x00000800
++#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00001000
++#define TG3_FLG3_ROBOSWITCH 0x00002000
+
+ #define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000
+
+@@ -2971,6 +2974,7 @@ struct tg3 {
+ #define TG3_PHY_ID_BCM5704 0x60008190
+ #define TG3_PHY_ID_BCM5705 0x600081a0
+ #define TG3_PHY_ID_BCM5750 0x60008180
++#define TG3_PHY_ID_BCM5750_2 0xbc050cd0
+ #define TG3_PHY_ID_BCM5752 0x60008100
+ #define TG3_PHY_ID_BCM5714 0x60008340
+ #define TG3_PHY_ID_BCM5780 0x60008350
+@@ -3007,7 +3011,7 @@ struct tg3 {
+ (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
+ (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
+ (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
+- (X) == TG3_PHY_ID_BCM8002)
++ (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2)
+
+ u32 phy_flags;
+ #define TG3_PHYFLG_IS_LOW_POWER 0x00000001
--- /dev/null
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ /dev/null
+@@ -1,166 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License. See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+- */
+-
+-#include <linux/platform_device.h>
+-#include <linux/module.h>
+-#include <linux/leds.h>
+-#include <linux/mtd/physmap.h>
+-#include <linux/ssb/ssb.h>
+-#include <linux/interrupt.h>
+-#include <linux/reboot.h>
+-#include <linux/gpio.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-/* GPIO definitions for the WGT634U */
+-#define WGT634U_GPIO_LED 3
+-#define WGT634U_GPIO_RESET 2
+-#define WGT634U_GPIO_TP1 7
+-#define WGT634U_GPIO_TP2 6
+-#define WGT634U_GPIO_TP3 5
+-#define WGT634U_GPIO_TP4 4
+-#define WGT634U_GPIO_TP5 1
+-
+-static struct gpio_led wgt634u_leds[] = {
+- {
+- .name = "power",
+- .gpio = WGT634U_GPIO_LED,
+- .active_low = 1,
+- .default_trigger = "heartbeat",
+- },
+-};
+-
+-static struct gpio_led_platform_data wgt634u_led_data = {
+- .num_leds = ARRAY_SIZE(wgt634u_leds),
+- .leds = wgt634u_leds,
+-};
+-
+-static struct platform_device wgt634u_gpio_leds = {
+- .name = "leds-gpio",
+- .id = -1,
+- .dev = {
+- .platform_data = &wgt634u_led_data,
+- }
+-};
+-
+-
+-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+- firmware. */
+-static struct mtd_partition wgt634u_partitions[] = {
+- {
+- .name = "cfe",
+- .offset = 0,
+- .size = 0x60000, /* 384k */
+- .mask_flags = MTD_WRITEABLE /* force read-only */
+- },
+- {
+- .name = "config",
+- .offset = 0x60000,
+- .size = 0x20000 /* 128k */
+- },
+- {
+- .name = "linux",
+- .offset = 0x80000,
+- .size = 0x140000 /* 1280k */
+- },
+- {
+- .name = "jffs",
+- .offset = 0x1c0000,
+- .size = 0x620000 /* 6272k */
+- },
+- {
+- .name = "nvram",
+- .offset = 0x7e0000,
+- .size = 0x20000 /* 128k */
+- },
+-};
+-
+-static struct physmap_flash_data wgt634u_flash_data = {
+- .parts = wgt634u_partitions,
+- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
+-};
+-
+-static struct resource wgt634u_flash_resource = {
+- .flags = IORESOURCE_MEM,
+-};
+-
+-static struct platform_device wgt634u_flash = {
+- .name = "physmap-flash",
+- .id = 0,
+- .dev = { .platform_data = &wgt634u_flash_data, },
+- .resource = &wgt634u_flash_resource,
+- .num_resources = 1,
+-};
+-
+-/* Platform devices */
+-static struct platform_device *wgt634u_devices[] __initdata = {
+- &wgt634u_flash,
+- &wgt634u_gpio_leds,
+-};
+-
+-static irqreturn_t gpio_interrupt(int irq, void *ignored)
+-{
+- int state;
+-
+- /* Interrupts are shared, check if the current one is
+- a GPIO interrupt. */
+- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+- SSB_CHIPCO_IRQ_GPIO))
+- return IRQ_NONE;
+-
+- state = gpio_get_value(WGT634U_GPIO_RESET);
+-
+- /* Interrupt are level triggered, revert the interrupt polarity
+- to clear the interrupt. */
+- gpio_polarity(WGT634U_GPIO_RESET, state);
+-
+- if (!state) {
+- printk(KERN_INFO "Reset button pressed");
+- ctrl_alt_del();
+- }
+-
+- return IRQ_HANDLED;
+-}
+-
+-static int __init wgt634u_init(void)
+-{
+- /* There is no easy way to detect that we are running on a WGT634U
+- * machine. Use the MAC address as an heuristic. Netgear Inc. has
+- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+- */
+-
+- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+-
+- if (et0mac[0] == 0x00 &&
+- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+-
+- printk(KERN_INFO "WGT634U machine detected.\n");
+-
+- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+- gpio_interrupt, IRQF_SHARED,
+- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+- gpio_direction_input(WGT634U_GPIO_RESET);
+- gpio_intmask(WGT634U_GPIO_RESET, 1);
+- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+- SSB_CHIPCO_IRQ_GPIO,
+- SSB_CHIPCO_IRQ_GPIO);
+- }
+-
+- wgt634u_flash_data.width = mcore->flash_buswidth;
+- wgt634u_flash_resource.start = mcore->flash_window;
+- wgt634u_flash_resource.end = mcore->flash_window
+- + mcore->flash_window_size
+- - 1;
+- return platform_add_devices(wgt634u_devices,
+- ARRAY_SIZE(wgt634u_devices));
+- } else
+- return -ENODEV;
+-}
+-
+-module_init(wgt634u_init);
--- /dev/null
+The Netgear wgt634u uses a different format for storing the
+configuration. This patch is needed to read out the correct
+configuration. The cfe_env.c file uses a different method way to read
+out the configuration than the in kernel cfe config reader.
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+
+-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
++obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/cfe_env.c
+@@ -0,0 +1,229 @@
++/*
++ * CFE environment variable access
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#define NVRAM_SIZE (0x1ff0)
++static char _nvdata[NVRAM_SIZE];
++static char _valuestr[256];
++
++/*
++ * TLV types. These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ *
++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
++ * indicates the size of the length field.
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS 0x00 /* for low bit */
++#define ENV_LENGTH_8BITS 0x01
++
++#define ENV_TYPE_USER 0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END 0x00
++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags
++ */
++
++#define ENV_FLG_NORMAL 0x00 /* normal read/write */
++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
++
++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
++
++
++/* *********************************************************************
++ * _nvram_read(buffer,offset,length)
++ *
++ * Read data from the NVRAM device
++ *
++ * Input parameters:
++ * buffer - destination buffer
++ * offset - offset of data to read
++ * length - number of bytes to read
++ *
++ * Return value:
++ * number of bytes read, or <0 if error occured
++ ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++ int i;
++ if (offset > NVRAM_SIZE)
++ return -1;
++
++ for ( i = 0; i < length; i++) {
++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++ }
++ return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++ while (*dest && (cnt > 0)) {
++ if (*dest == c) return (char *) dest;
++ dest++;
++ cnt--;
++ }
++ return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param name name of variable to get
++ * @return value of variable or NULL if undefined
++ */
++
++char*
++cfe_env_get(unsigned char *nv_buf, char* name)
++{
++ int size;
++ unsigned char *buffer;
++ unsigned char *ptr;
++ unsigned char *envval;
++ unsigned int reclen;
++ unsigned int rectype;
++ int offset;
++ int flg;
++
++ if (!strcmp(name, "nvram_type"))
++ return "cfe";
++
++ size = NVRAM_SIZE;
++ buffer = &_nvdata[0];
++
++ ptr = buffer;
++ offset = 0;
++
++ /* Read the record type and length */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++
++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
++
++ /* Adjust pointer for TLV type */
++ rectype = *(ptr);
++ offset++;
++ size--;
++
++ /*
++ * Read the length. It can be either 1 or 2 bytes
++ * depending on the code
++ */
++ if (rectype & ENV_LENGTH_8BITS) {
++ /* Read the record type and length - 8 bits */
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++ goto error;
++ }
++ reclen = *(ptr);
++ size--;
++ offset++;
++ }
++ else {
++ /* Read the record type and length - 16 bits, MSB first */
++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++ goto error;
++ }
++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++ size -= 2;
++ offset += 2;
++ }
++
++ if (reclen > size)
++ break; /* should not happen, bad NVRAM */
++
++ switch (rectype) {
++ case ENV_TLV_TYPE_ENV:
++ /* Read the TLV data */
++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++ goto error;
++ flg = *ptr++;
++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++ if (envval) {
++ *envval++ = '\0';
++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0
++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++ if(!strcmp(ptr, name)){
++ return _valuestr;
++ }
++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++ return _valuestr;
++ }
++ break;
++
++ default:
++ /* Unknown TLV type, skip it. */
++ break;
++ }
++
++ /*
++ * Advance to next TLV
++ */
++
++ size -= (int)reclen;
++ offset += reclen;
++
++ /* Read the next record type */
++ ptr = buffer;
++ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++ goto error;
++ }
++
++error:
++ return NULL;
++
++}
++
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -22,6 +22,8 @@
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+
+ static char nvram_buf[NVRAM_SPACE];
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
+
+ /* Probe for NVRAM header */
+ static void early_nvram_init(void)
+@@ -34,6 +36,25 @@ static void early_nvram_init(void)
+
+ base = mcore->flash_window;
+ lim = mcore->flash_window_size;
++ cfe_env = 0;
++
++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
++ if (lim >= 8 * 1024 * 1024) {
++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
++ dst = (u32 *) nvram_buf;
++
++ if ((*src & 0xff00ff) == 0x000001) {
++ printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++ for (i = 0; i < 0x1ff0; i++) {
++ if (*src == 0xFFFFFFFF)
++ break;
++ *dst++ = *src++;
++ }
++ cfe_env = 1;
++ return;
++ }
++ }
+
+ off = FLASH_MIN;
+ while (off <= lim) {
+@@ -75,6 +96,12 @@ int nvram_getenv(char *name, char *val,
+ if (!nvram_buf[0])
+ early_nvram_init();
+
++ if (cfe_env) {
++ value = cfe_env_get(nvram_buf, name);
++ snprintf(val, val_len, "%s", value);
++ return 0;
++ }
++
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
+@@ -104,6 +131,9 @@ char *nvram_get(const char *name)
+ if (!nvram_buf[0])
+ early_nvram_init();
+
++ if (cfe_env)
++ return cfe_env_get(nvram_buf, name);
++
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
--- /dev/null
+commit 812bcf8f47b45a206948008144233bc47d5747ac
+Author: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu Dec 16 20:01:17 2010 +0100
+
+ Revert "tg3: Remove 5720, 5750, and 5750M"
+
+ This reverts commit 67b284d476bcb3d100e946da23d6cf9acfd0465c.
+
+--- a/drivers/net/tg3.c
++++ b/drivers/net/tg3.c
+@@ -217,9 +217,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)},
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2074,6 +2074,7 @@
+ #define PCI_DEVICE_ID_NX2_57711E 0x1650
+ #define PCI_DEVICE_ID_TIGON3_5705 0x1653
+ #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
++#define PCI_DEVICE_ID_TIGON3_5720 0x1658
+ #define PCI_DEVICE_ID_TIGON3_5721 0x1659
+ #define PCI_DEVICE_ID_TIGON3_5722 0x165a
+ #define PCI_DEVICE_ID_TIGON3_5723 0x165b
+@@ -2089,11 +2090,13 @@
+ #define PCI_DEVICE_ID_TIGON3_5754M 0x1672
+ #define PCI_DEVICE_ID_TIGON3_5755M 0x1673
+ #define PCI_DEVICE_ID_TIGON3_5756 0x1674
++#define PCI_DEVICE_ID_TIGON3_5750 0x1676
+ #define PCI_DEVICE_ID_TIGON3_5751 0x1677
+ #define PCI_DEVICE_ID_TIGON3_5715 0x1678
+ #define PCI_DEVICE_ID_TIGON3_5715S 0x1679
+ #define PCI_DEVICE_ID_TIGON3_5754 0x167a
+ #define PCI_DEVICE_ID_TIGON3_5755 0x167b
++#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
+ #define PCI_DEVICE_ID_TIGON3_5751M 0x167d
+ #define PCI_DEVICE_ID_TIGON3_5751F 0x167e
+ #define PCI_DEVICE_ID_TIGON3_5787F 0x167f
--- /dev/null
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -31,6 +31,7 @@
+
+ #define WDT_DEFAULT_TIME 30 /* seconds */
+ #define WDT_MAX_TIME 255 /* seconds */
++#define WDT_SHIFT 15 /* 32.768 KHz on cores with slow WDT clock */
+
+ static int wdt_time = WDT_DEFAULT_TIME;
+ static int nowayout = WATCHDOG_NOWAYOUT;
+@@ -50,11 +51,11 @@ static unsigned long bcm47xx_wdt_busy;
+ static char expect_release;
+ static struct timer_list wdt_timer;
+ static atomic_t ticks;
++static int needs_sw_scale;
+
+-static inline void bcm47xx_wdt_hw_start(void)
++static inline void bcm47xx_wdt_hw_start(u32 ticks)
+ {
+- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
++ ssb_watchdog_timer_set(&ssb_bcm47xx, ticks);
+ }
+
+ static inline int bcm47xx_wdt_hw_stop(void)
+@@ -65,33 +66,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
+ static void bcm47xx_timer_tick(unsigned long unused)
+ {
+ if (!atomic_dec_and_test(&ticks)) {
+- bcm47xx_wdt_hw_start();
++ /* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
++ bcm47xx_wdt_hw_start(0xfffffff);
+ mod_timer(&wdt_timer, jiffies + HZ);
+ } else {
+- printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
++ printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
+ }
+ }
+
+-static inline void bcm47xx_wdt_pet(void)
++static void bcm47xx_wdt_pet(void)
+ {
+- atomic_set(&ticks, wdt_time);
++ if(needs_sw_scale)
++ atomic_set(&ticks, wdt_time);
++ else
++ bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
+ }
+
+ static void bcm47xx_wdt_start(void)
+ {
+ bcm47xx_wdt_pet();
+- bcm47xx_timer_tick(0);
+-}
+-
+-static void bcm47xx_wdt_pause(void)
+-{
+- del_timer_sync(&wdt_timer);
+- bcm47xx_wdt_hw_stop();
++ if(needs_sw_scale)
++ bcm47xx_timer_tick(0);
+ }
+
+ static void bcm47xx_wdt_stop(void)
+ {
+- bcm47xx_wdt_pause();
++ if(needs_sw_scale)
++ del_timer_sync(&wdt_timer);
++ bcm47xx_wdt_hw_stop();
+ }
+
+ static int bcm47xx_wdt_settimeout(int new_time)
+@@ -243,7 +245,15 @@ static int __init bcm47xx_wdt_init(void)
+ if (bcm47xx_wdt_hw_stop() < 0)
+ return -ENODEV;
+
+- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++ /* FIXME Other cores */
++ if(ssb_bcm47xx.chip_id == 0x5354) {
++ /* Slow WDT clock, no pre-scaling */
++ needs_sw_scale = 0;
++ } else {
++ /* Fast WDT clock, needs software pre-scaling */
++ needs_sw_scale = 1;
++ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++ }
+
+ if (bcm47xx_wdt_settimeout(wdt_time)) {
+ bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
--- /dev/null
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -20,10 +20,28 @@
+ #ifdef CONFIG_BCM47XX
+ #include <asm/paccess.h>
+ #include <linux/ssb/ssb.h>
+-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++ return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++ unsigned long x;
++ get_dbe(x, (unsigned long *)addr);;
++}
+
+-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+ #else
+ #define BCM4710_DUMMY_RREG()
+
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -834,6 +834,9 @@ build_get_pgde32(u32 **p, unsigned int t
+ #endif
+ uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+ uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1187,12 +1190,12 @@ static void __cpuinit build_r4000_tlb_re
+ /* No need for uasm_i_nop */
+ }
+
+-#ifdef CONFIG_BCM47XX
+- uasm_i_nop(&p);
+-#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++# endif
+ build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+
+@@ -1204,6 +1207,9 @@ static void __cpuinit build_r4000_tlb_re
+ build_update_entries(&p, K0, K1);
+ build_tlb_write_entry(&p, &l, &r, tlb_random);
+ uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(&p);
++#endif
+ uasm_i_eret(&p); /* return from trap */
+ }
+ #ifdef CONFIG_HUGETLB_PAGE
+@@ -1709,12 +1715,12 @@ build_r4000_tlbchange_handler_head(u32 *
+ struct uasm_reloc **r, unsigned int pte,
+ unsigned int ptr)
+ {
+-#ifdef CONFIG_BCM47XX
+- uasm_i_nop(p);
+-#endif
+ #ifdef CONFIG_64BIT
+ build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++# endif
+ build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
+ #endif
+
+@@ -1751,6 +1757,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+ build_update_entries(p, tmp, ptr);
+ build_tlb_write_entry(p, l, r, tlb_indexed);
+ uasm_l_leave(l, *p);
++#ifdef CONFIG_BCM47XX
++ uasm_i_nop(p);
++#endif
+ uasm_i_eret(p); /* return from trap */
+
+ #ifdef CONFIG_64BIT
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -22,6 +22,19 @@
+ #include <asm/page.h>
+ #include <asm/thread_info.h>
+
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++# undef eret
++# endif
++# define eret \
++ .set push; \
++ .set noreorder; \
++ nop; \
++ nop; \
++ eret; \
++ .set pop;
++#endif
++
+ #define PANIC_PIC(msg) \
+ .set push; \
+ .set reorder; \
+@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
+ .set noat
+ #ifdef CONFIG_BCM47XX
+ nop
+- nop
+ #endif
+ #if R5432_CP0_INTERRUPT_WAR
+ mfc0 k0, CP0_INDEX
+@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
+ .set push
+ .set mips3
+ .set noat
++#ifdef CONFIG_BCM47XX
++ nop
++#endif
+ mfc0 k1, CP0_CAUSE
+ li k0, 31<<2
+ andi k1, k1, 0x7c
--- /dev/null
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
+ * Probe for usable interrupts using the force
+ * register to generate bogus card status events.
+ */
++#ifndef CONFIG_BCM47XX
++ /* WRT54G3G does not like this */
+ cb_writel(socket, CB_SOCKET_EVENT, -1);
+ cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+ reg = exca_readb(socket, I365_CSCINT);
+@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
+ }
+ cb_writel(socket, CB_SOCKET_MASK, 0);
+ exca_writeb(socket, I365_CSCINT, reg);
++#endif
+
+ mask = probe_irq_mask(val) & 0xffff;
+
+@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
+ else
+ socket->socket.irq_mask = 0;
+
++ /* irq mask probing is broken for the WRT54G3G */
++ if (socket->socket.irq_mask == 0)
++ socket->socket.irq_mask = 0x6f8;
++
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
+@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+
++ /* Generate an interrupt on card insert/remove */
++ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++ /* Set up Multifunction Routing Status Register */
++ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++ /* Switch interrupts to parallelized */
++ config_writeb(socket, 0x92, 0x64);
++
+ yenta_fixup_parent_bridge(dev->subordinate);
+
+ /* Register it with the pcmcia layer.. */
--- /dev/null
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -90,6 +90,14 @@ const char *ssb_core_name(u16 coreid)
+ return "ARM 1176";
+ case SSB_DEV_ARM_7TDMI:
+ return "ARM 7TDMI";
++ case SSB_DEV_ETHERNET_GBIT2:
++ return "Gigabit MAC";
++ case SSB_DEV_MIPS_74K:
++ return "MIPS 74k";
++ case SSB_DEV_DDR_CTRLR:
++ return "DDR1/2 memory controller";
++ case SSB_DEV_I2S:
++ return "I2S";
+ }
+ return "UNKNOWN";
+ }
+@@ -148,6 +156,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4710:
+ case 0x4610:
+ case 0x4704:
++ case 0x4716:
+ return 9;
+ default:
+ ssb_printk(KERN_ERR PFX
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -155,9 +155,16 @@ struct ssb_bus_ops {
+ #define SSB_DEV_MINI_MACPHY 0x823
+ #define SSB_DEV_ARM_1176 0x824
+ #define SSB_DEV_ARM_7TDMI 0x825
++#define SSB_DEV_ETHERNET_GBIT2 0x82d
++#define SSB_DEV_MIPS_74K 0x82c
++#define SSB_DEV_DDR_CTRLR 0x82e
++#define SSB_DEV_I2S 0x834
++#define SSB_DEV_DEFAULT 0xfff
+
+ /* Vendor-ID values */
+ #define SSB_VENDOR_BROADCOM 0x4243
++#define SSB_VENDOR_BROADCOM2 0x04BF
++#define SSB_VENDOR_ARM 0x43b
+
+ /* Some kernel subsystems poke with dev->drvdata, so we must use the
+ * following ugly workaround to get from struct device to struct ssb_device */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -11,6 +11,7 @@
+ #define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */
+ #define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */
+ #define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */
++#define SSB_AI_BASE 0x18100000 /* base for AI registers */
+
+ #define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */
+ #define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */
+@@ -26,6 +27,7 @@
+ #define SSB_EUART (SSB_EXTIF_BASE + 0x00800000)
+ #define SSB_LED (SSB_EXTIF_BASE + 0x00900000)
+
++#define SSB_EROM_ASD_SZ_BASE 0x00001000
+
+ /* Enumeration space constants */
+ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */
+@@ -499,5 +501,41 @@ enum {
+ #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */
+ #define SSB_ADM_BASE2_SHIFT 16
+
++/***** EROM defines for AI type busses *****/
++#define SSB_EROM_VALID 1
++#define SSB_EROM_END 0xe
++#define SSB_EROM_TAG 0xe
++/* Adress Space Descriptor */
++#define SSB_EROM_ASD 0x4
++#define SSB_EROM_ASD_SP_MASK 0x00000f00
++#define SSB_EROM_ASD_SP_SHIFT 8
++#define SSB_EROM_ASD_ST_MASK 0x000000c0
++#define SSB_EROM_ASD_ST_SLAVE 0x00000000
++#define SSB_EROM_ASD_ST_BRIDGE 0x00000040
++#define SSB_EROM_ASD_ST_MWRAP 0x000000c0
++#define SSB_EROM_ASD_ST_SWRAP 0x00000080
++#define SSB_EROM_ASD_ADDR_MASK 0xfffff000
++#define SSB_EROM_ASD_AG32 0x00000008
++#define SSB_EROM_ASD_SZ_MASK 0x00000030
++#define SSB_EROM_ASD_SZ_SZD 0x00000030
++#define SSB_EROM_ASD_SZ_SHIFT 4
++#define SSB_EROM_CI 0
++#define SSB_EROM_CIA_CID_MASK 0x000fff00
++#define SSB_EROM_CIA_CID_SHIFT 8
++#define SSB_EROM_CIA_MFG_MASK 0xfff00000
++#define SSB_EROM_CIA_MFG_SHIFT 20
++#define SSB_EROM_CIB_REV_MASK 0xff000000
++#define SSB_EROM_CIB_REV_SHIFT 24
++#define SSB_EROM_CIB_NMW_MASK 0x0007c000
++#define SSB_EROM_CIB_NSW_MASK 0x00f80000
++#define SSB_EROM_CIB_NSP_MASK 0x00003e00
++
++/***** Registers of AI config space *****/
++#define SSB_AI_RESETCTRL 0x800 /* maybe 0x804 for big endian */
++#define SSB_AI_RESETCTRL_RESET 1
++#define SSB_AI_IOCTRL 0x408 /* maybe 0x40c for big endian */
++#define SSB_CF_FGC 0x0002
++#define SSB_CF_CLOCK_EN 0x001
++#define SSB_AI_oobselouta30 0x100
+
+ #endif /* LINUX_SSB_REGS_H_ */
--- /dev/null
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -370,7 +370,7 @@ static void ssb_pcicore_init_hostmode(st
+ set_io_port_base(ssb_pcicore_controller.io_map_base);
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
+- mdelay(10);
++ mdelay(300);
+ register_pci_controller(&ssb_pcicore_controller);
+ }
+
--- /dev/null
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -246,6 +246,10 @@ static int bcm47xx_get_invariants(struct
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+
++ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
++ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
++ iv->has_cardbus_slot = 0;
++
+ return 0;
+ }
+
--- /dev/null
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -21,7 +21,8 @@
+ #include <asm/mach-bcm47xx/nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+
+-static char nvram_buf[NVRAM_SPACE];
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
+ static int cfe_env;
+ extern char *cfe_env_get(char *nv_buf, const char *name);
+
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+
+ #endif /* CONFIG_DMA_NONCOHERENT */
+
projects / openwrt / staging / chunkeey.git / commitdiff