This commit makes a few slight modifications to the efi_call_virt() macro
to get it to work with function pointers that are stored in locations
other than efi.systab->runtime, and renames the macro to
efi_call_virt_pointer(). The majority of the changes here are to pull
these macros up into header files so that they can be accessed from
outside of drivers/firmware/efi/runtime-wrappers.c.
The most significant change not directly related to the code move is to
add an extra "p" argument into the appropriate efi_call macros, and use
that new argument in place of the, formerly hard-coded,
efi.systab->runtime pointer.
The last piece of the puzzle was to add an efi_call_virt() macro back into
drivers/firmware/efi/runtime-wrappers.c to wrap around the new
efi_call_virt_pointer() macro - this was mainly to keep the code from
looking too cluttered by adding a bunch of extra references to
efi.systab->runtime everywhere.
Note that I also broke up the code in the efi_call_virt_pointer() macro a
bit in the process of moving it.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1466839230-12781-5-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
#define arch_efi_call_virt_setup() efi_virtmap_load()
#define arch_efi_call_virt_teardown() efi_virtmap_unload()
-#define arch_efi_call_virt(f, args...) \
+#define arch_efi_call_virt(p, f, args...) \
({ \
efi_##f##_t *__f; \
- __f = efi.systab->runtime->f; \
+ __f = p->f; \
__f(args); \
})
efi_virtmap_load(); \
})
-#define arch_efi_call_virt(f, args...) \
+#define arch_efi_call_virt(p, f, args...) \
({ \
efi_##f##_t *__f; \
- __f = efi.systab->runtime->f; \
+ __f = p->f; \
__f(args); \
})
/*
* Wrap all the virtual calls in a way that forces the parameters on the stack.
*/
-#define arch_efi_call_virt(f, args...) \
+#define arch_efi_call_virt(p, f, args...) \
({ \
- ((efi_##f##_t __attribute__((regparm(0)))*) \
- efi.systab->runtime->f)(args); \
+ ((efi_##f##_t __attribute__((regparm(0)))*) p->f)(args); \
})
#define efi_ioremap(addr, size, type, attr) ioremap_cache(addr, size)
} \
})
-#define arch_efi_call_virt(f, args...) \
- efi_call((void *)efi.systab->runtime->f, args) \
+#define arch_efi_call_virt(p, f, args...) \
+ efi_call((void *)p->f, args) \
#define arch_efi_call_virt_teardown() \
({ \
#include <linux/stringify.h>
#include <asm/efi.h>
-static void efi_call_virt_check_flags(unsigned long flags, const char *call)
+/*
+ * Wrap around the new efi_call_virt_generic() macros so that the
+ * code doesn't get too cluttered:
+ */
+#define efi_call_virt(f, args...) \
+ efi_call_virt_pointer(efi.systab->runtime, f, args)
+#define __efi_call_virt(f, args...) \
+ __efi_call_virt_pointer(efi.systab->runtime, f, args)
+
+void efi_call_virt_check_flags(unsigned long flags, const char *call)
{
unsigned long cur_flags, mismatch;
local_irq_restore(flags);
}
-/*
- * Arch code can implement the following three template macros, avoiding
- * reptition for the void/non-void return cases of {__,}efi_call_virt:
- *
- * * arch_efi_call_virt_setup
- *
- * Sets up the environment for the call (e.g. switching page tables,
- * allowing kernel-mode use of floating point, if required).
- *
- * * arch_efi_call_virt
- *
- * Performs the call. The last expression in the macro must be the call
- * itself, allowing the logic to be shared by the void and non-void
- * cases.
- *
- * * arch_efi_call_virt_teardown
- *
- * Restores the usual kernel environment once the call has returned.
- */
-
-#define efi_call_virt(f, args...) \
-({ \
- efi_status_t __s; \
- unsigned long flags; \
- arch_efi_call_virt_setup(); \
- local_save_flags(flags); \
- __s = arch_efi_call_virt(f, args); \
- efi_call_virt_check_flags(flags, __stringify(f)); \
- arch_efi_call_virt_teardown(); \
- __s; \
-})
-
-#define __efi_call_virt(f, args...) \
-({ \
- unsigned long flags; \
- arch_efi_call_virt_setup(); \
- local_save_flags(flags); \
- arch_efi_call_virt(f, args); \
- efi_call_virt_check_flags(flags, __stringify(f)); \
- arch_efi_call_virt_teardown(); \
-})
-
/*
* According to section 7.1 of the UEFI spec, Runtime Services are not fully
* reentrant, and there are particular combinations of calls that need to be
unsigned long size);
bool efi_runtime_disabled(void);
+extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
+
+/*
+ * Arch code can implement the following three template macros, avoiding
+ * reptition for the void/non-void return cases of {__,}efi_call_virt():
+ *
+ * * arch_efi_call_virt_setup()
+ *
+ * Sets up the environment for the call (e.g. switching page tables,
+ * allowing kernel-mode use of floating point, if required).
+ *
+ * * arch_efi_call_virt()
+ *
+ * Performs the call. The last expression in the macro must be the call
+ * itself, allowing the logic to be shared by the void and non-void
+ * cases.
+ *
+ * * arch_efi_call_virt_teardown()
+ *
+ * Restores the usual kernel environment once the call has returned.
+ */
+
+#define efi_call_virt_pointer(p, f, args...) \
+({ \
+ efi_status_t __s; \
+ unsigned long __flags; \
+ \
+ arch_efi_call_virt_setup(); \
+ \
+ local_save_flags(__flags); \
+ __s = arch_efi_call_virt(p, f, args); \
+ efi_call_virt_check_flags(__flags, __stringify(f)); \
+ \
+ arch_efi_call_virt_teardown(); \
+ \
+ __s; \
+})
+
+#define __efi_call_virt_pointer(p, f, args...) \
+({ \
+ unsigned long __flags; \
+ \
+ arch_efi_call_virt_setup(); \
+ \
+ local_save_flags(__flags); \
+ arch_efi_call_virt(p, f, args); \
+ efi_call_virt_check_flags(__flags, __stringify(f)); \
+ \
+ arch_efi_call_virt_teardown(); \
+})
+
#endif /* _LINUX_EFI_H */
projects / openwrt / staging / blogic.git / commitdiff