include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2017.07
+PKG_VERSION:=2017.11
-PKG_HASH:=5374bfdc8acb9a38c025371b1ff20f45e7533668e84e685d0df5d9e7c0e4feff
+PKG_HASH:=6a018fd3caf58f3dcfa23ee989a82bd35df03af71872b9dca8c6d758a0d26c05
PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
+++ /dev/null
-From 335d30050b0d02444c9297f7a9b0cbf75dce847f Mon Sep 17 00:00:00 2001
-From: Olliver Schinagl <oliver@schinagl.nl>
-Date: Fri, 12 May 2017 11:38:54 +0200
-Subject: sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
-
-This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash
-storage.
-https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
-
-It is a assembly variant of the regular Lime2 but featuring eMMC for
-storage.
-
-Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- board/sunxi/MAINTAINERS | 5 +++++
- configs/A20-OLinuXino-Lime2-eMMC_defconfig | 36 ++++++++++++++++++++++++++++++
- 2 files changed, 41 insertions(+)
- create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
-
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -88,6 +88,11 @@ M: Iain Paton <ipaton0@gmail.com>
- S: Maintained
- F: configs/A20-OLinuXino-Lime2_defconfig
-
-+A20-OLINUXINO-LIME2-EMMC BOARD
-+M: Olliver Schinagl <oliver@schinagl.nl>
-+S: Maintained
-+F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
-+
- A33-OLINUXINO BOARD
- M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
- S: Maintained
---- /dev/null
-+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-@@ -0,0 +1,37 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN7I=y
-+CONFIG_DRAM_CLK=384
-+CONFIG_MMC0_CD_PIN="PH1"
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_USB0_VBUS_PIN="PC17"
-+CONFIG_USB0_VBUS_DET="PH5"
-+CONFIG_I2C1_ENABLE=y
-+CONFIG_SATAPWR="PC3"
-+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
-+CONFIG_AHCI=y
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_SPL=y
-+CONFIG_SPL_I2C_SUPPORT=y
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+CONFIG_CMD_DFU=y
-+CONFIG_CMD_USB_MASS_STORAGE=y
-+# CONFIG_CMD_FPGA is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_ISO_PARTITION is not set
-+# CONFIG_SPL_PARTITION_UUIDS is not set
-+CONFIG_DFU_RAM=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_RGMII=y
-+CONFIG_SUN7I_GMAC=y
-+CONFIG_GMAC_TX_DELAY=1
-+CONFIG_AXP_ALDO3_VOLT=2800
-+CONFIG_AXP_ALDO4_VOLT=2800
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_MUSB_GADGET=y
-+CONFIG_USB_GADGET=y
-+CONFIG_USB_GADGET_DOWNLOAD=y
-+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-+CONFIG_G_DNL_PRODUCT_NUM=0x1010
+++ /dev/null
-From fb7fe04da2187b9853d713cb643d01bd56813e3d Mon Sep 17 00:00:00 2001
-From: Emmanuel Vadot <manu@bidouilliste.com>
-Date: Fri, 12 May 2017 11:38:53 +0200
-Subject: ARM: dts: sunxi: Change node name for pwrseq pin on
- Olinuxino-lime2-emmc
-
-The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one.
-This makes the original node (mmc2_pins_a) scrapped out of the dtb and
-result in a unusable eMMC if U-Boot didn't configured the pins to the
-correct functions.
-
-Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
-@@ -56,7 +56,7 @@
- };
-
- &pio {
-- mmc2_pins_nrst: mmc2@0 {
-+ mmc2_pins_nrst: mmc2-rst-pin {
- allwinner,pins = "PC16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+CONFIG_GMAC_TX_DELAY=1
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
- CONFIG_USB_EHCI_HCD=y
+ CONFIG_SCSI=y
-From 5b707cdadb35d896daafff52983416e1c617745b Mon Sep 17 00:00:00 2001
+From 637800493945ffed2f454756300437a4ec86e3b1 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 19 Jul 2017 22:23:15 +0200
-Subject: [PATCH] mkimage: check environment for dtc binary location
+Subject: mkimage: check environment for dtc binary location
Currently mkimage assumes the dtc binary is in the path and fails
otherwise. This patch makes it check the DTC environment variable first
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
-@@ -647,9 +647,14 @@ static int fit_handle_file(struct image_
+@@ -650,9 +650,14 @@ static int fit_handle_file(struct image_
}
*cmd = '\0';
} else if (params->datafile) {
+ dtc = MKIMAGE_DTC;
+
/* dtc -I dts -O dtb -p 500 datafile > tmpfile */
- snprintf(cmd, sizeof(cmd), "%s %s %s > %s",
+ snprintf(cmd, sizeof(cmd), "%s %s \"%s\" > \"%s\"",
- MKIMAGE_DTC, params->dtc, params->datafile, tmpfile);
+ dtc, params->dtc, params->datafile, tmpfile);
debug("Trying to execute \"%s\"\n", cmd);
} else {
- snprintf(cmd, sizeof(cmd), "cp %s %s",
+ snprintf(cmd, sizeof(cmd), "cp \"%s\" \"%s\"",
+++ /dev/null
-From eed65e5c25cbc4b6e893f140e9d7898f4624c114 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 19 Jul 2017 23:12:38 +0200
-Subject: [PATCH 210/213] Revert "fdt: Makefile: Build python libfdt library if
- needed"
-
-This reverts commit e38ffc42674fedc750ca895046be0bd983b56dd5.
----
- Makefile | 17 ++---------------
- scripts/Makefile.spl | 17 ++++-------------
- 2 files changed, 6 insertions(+), 28 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1116,7 +1116,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
-
- u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
- $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
-- $(if $(CONFIG_HAVE_REFCODE),refcode.bin) checkbinman FORCE
-+ $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
- $(call if_changed,binman)
-
- OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
-@@ -1125,8 +1125,7 @@ u-boot-x86-16bit.bin: u-boot FORCE
- endif
-
- ifneq ($(CONFIG_ARCH_SUNXI),)
--u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb \
-- checkbinman FORCE
-+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
- $(call if_changed,binman)
- endif
-
-@@ -1355,18 +1354,6 @@ $(version_h): include/config/uboot.relea
- $(timestamp_h): $(srctree)/Makefile FORCE
- $(call filechk,timestamp.h)
-
--checkbinman: tools
-- @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \
-- echo >&2; \
-- echo >&2 '*** binman needs the Python libfdt library.'; \
-- echo >&2 '*** Either install it on your system, or try:'; \
-- echo >&2 '***'; \
-- echo >&2 '*** sudo apt-get install swig libpython-dev'; \
-- echo >&2 '***'; \
-- echo >&2 '*** to have U-Boot build its own version.'; \
-- false; \
-- fi
--
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds = LDS $@
- cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
---- a/scripts/Makefile.spl
-+++ b/scripts/Makefile.spl
-@@ -257,12 +257,14 @@ PHONY += dts_dir
- dts_dir:
- $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
-
--include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
-+include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
- $(call if_changed,dtoch)
-
--$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
-+$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
- $(call if_changed,dtocc)
-
-+dtoc: #$(objtree)/tools/_libfdt.so
-+
- ifdef CONFIG_SAMSUNG
- ifdef CONFIG_VAR_SIZE_SPL
- VAR_SIZE_PARAM = --vs
-@@ -355,17 +357,6 @@ ifneq ($(cmd_files),)
- include $(cmd_files)
- endif
-
--checkdtoc: tools
-- @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \
-- echo '*** dtoc needs the Python libfdt library. Either '; \
-- echo '*** install it on your system, or try:'; \
-- echo '***'; \
-- echo '*** sudo apt-get install swig libpython-dev'; \
-- echo '***'; \
-- echo '*** to have U-Boot build its own version.'; \
-- false; \
-- fi
--
- PHONY += FORCE
- FORCE:
-
--- /dev/null
+From def280c4792262a368c8861312dc6b376181021f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 1 Jan 2018 23:10:56 +0100
+Subject: sunxi: deactivate binman
+
+Use the old way to generate the images instead of binman.
+binman needs python with swig to avoid this host tool dependency use the
+old way of generating images.
+---
+ Makefile | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -1144,9 +1144,10 @@ u-boot-x86-16bit.bin: u-boot FORCE
+ endif
+
+ ifneq ($(CONFIG_ARCH_SUNXI),)
+-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb \
+- checkbinman FORCE
+- $(call if_changed,binman)
++OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
++ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
++u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
++ $(call if_changed,pad_cat)
+ endif
+
+ ifneq ($(CONFIG_TEGRA),)
+++ /dev/null
-From cdee74ad13e933631caf7f544c319d8e981c6063 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 20 Jul 2017 19:49:25 +0200
-Subject: [PATCH 211/213] Revert "scripts/Makefile.lib: Always have
- ...-u-boot.dtsi be able to override"
-
-This reverts commit 7452946e7f3742b3ff1cb4a50603e7492aceea88.
----
- scripts/Makefile.lib | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -306,10 +306,10 @@ $(obj)/%.dtb.S: $(obj)/%.dtb
-
- quiet_cmd_dtc = DTC $@
- # Modified for U-Boot
--# Bring in any U-Boot-specific include at the end of the file
-+# Bring in any U-Boot-specific include after the '/dts-v1/;' header
- cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- cat $< $(if $(u_boot_dtsi),\
-- | sed "$$ a\#include \"$(u_boot_dtsi)\"") | \
-+ | sed '/^\/ {$$/{x;s%$$%\#include \"$(u_boot_dtsi)\"%;G;}') | \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) - ; \
- $(DTC) -O dtb -o $@ -b 0 \
- -i $(dir $<) $(DTC_FLAGS) \
+++ /dev/null
-From 53d123333fa0ddc64b2c55d48366f4582ac6922d Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 20 Jul 2017 19:50:52 +0200
-Subject: [PATCH 212/213] Revert "Avoid non-portable sed construct"
-
-This reverts commit 208db781cad4c24f538658a9cb17e24fa43ca3c9.
----
- scripts/Makefile.lib | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -309,7 +309,7 @@ quiet_cmd_dtc = DTC $@
- # Bring in any U-Boot-specific include after the '/dts-v1/;' header
- cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- cat $< $(if $(u_boot_dtsi),\
-- | sed '/^\/ {$$/{x;s%$$%\#include \"$(u_boot_dtsi)\"%;G;}') | \
-+ | sed 's%^/ {$$%\#include \"$(u_boot_dtsi)\"\n&%') | \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) - ; \
- $(DTC) -O dtb -o $@ -b 0 \
- -i $(dir $<) $(DTC_FLAGS) \
+++ /dev/null
-From cf1defd80b7594f6f2721ab2dacffe48522abfca Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 20 Jul 2017 19:51:01 +0200
-Subject: [PATCH 213/213] Revert "sunxi: Use binman for sunxi boards"
-
-This reverts commit 61b994a386eb6f631dc1c2194d4cce9b1a43542c.
----
- Makefile | 6 ++++--
- arch/arm/dts/sunxi-u-boot.dtsi | 14 --------------
- scripts/Makefile.lib | 4 ++--
- 3 files changed, 6 insertions(+), 18 deletions(-)
- delete mode 100644 arch/arm/dts/sunxi-u-boot.dtsi
-
---- a/Makefile
-+++ b/Makefile
-@@ -1125,8 +1125,10 @@ u-boot-x86-16bit.bin: u-boot FORCE
- endif
-
- ifneq ($(CONFIG_ARCH_SUNXI),)
--u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
-- $(call if_changed,binman)
-+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-+ $(call if_changed,pad_cat)
- endif
-
- ifneq ($(CONFIG_TEGRA),)
---- a/arch/arm/dts/sunxi-u-boot.dtsi
-+++ /dev/null
-@@ -1,14 +0,0 @@
--#include <config.h>
--
--/ {
-- binman {
-- filename = "u-boot-sunxi-with-spl.bin";
-- pad-byte = <0xff>;
-- blob {
-- filename = "spl/sunxi-spl.bin";
-- };
-- u-boot-img {
-- pos = <CONFIG_SPL_PAD_TO>;
-- };
-- };
--};
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -308,8 +308,8 @@ quiet_cmd_dtc = DTC $@
- # Modified for U-Boot
- # Bring in any U-Boot-specific include after the '/dts-v1/;' header
- cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
-- cat $< $(if $(u_boot_dtsi),\
-- | sed 's%^/ {$$%\#include \"$(u_boot_dtsi)\"\n&%') | \
-+ cat $< $(if $(u-boot-dtsi),\
-+ | sed 's%^/ {$$%\#include \"$(u-boot-dtsi)\"\n&%') | \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) - ; \
- $(DTC) -O dtb -o $@ -b 0 \
- -i $(dir $<) $(DTC_FLAGS) \
+++ /dev/null
-From 6ff005cf19363382fc867d7876a75fd8a386e894 Mon Sep 17 00:00:00 2001
-From: Dave Prue <dave@prue.com>
-Date: Thu, 31 Aug 2017 19:21:01 +0200
-Subject: [PATCH] sunxi: Fix CONFIG_SUNXI_GMAC references
-
-SUNXI_GMAC was still used to configure the code where as the
-same has been renamed and moved to Kconfig in below commit
-"sunxi: Move SUNXI_GMAC to Kconfig"
-(sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)
-
-Signed-off-by: Dave Prue <dave@prue.com>
-Reviewed-by: Simon Glass <sjg@chromium.org>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
-Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
-Tested-by: Mark Kettenis <kettenis@openbsd.org>
-[Tweek commit message, config_whitelist.txt, build-whitelist.sh]
-Signed-off-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +-
- board/sunxi/Makefile | 2 +-
- include/configs/sunxi-common.h | 2 +-
- scripts/build-whitelist.sh | 4 ++--
- scripts/config_whitelist.txt | 1 -
- 5 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
-+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
-@@ -24,7 +24,7 @@ void sdelay(unsigned long);
- void return_to_fel(uint32_t lr, uint32_t sp);
-
- /* Board / SoC level designware gmac init */
--#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
-+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC
- void eth_init_board(void);
- #else
- static inline void eth_init_board(void) {}
---- a/board/sunxi/Makefile
-+++ b/board/sunxi/Makefile
-@@ -9,7 +9,7 @@
- # SPDX-License-Identifier: GPL-2.0+
- #
- obj-y += board.o
--obj-$(CONFIG_SUNXI_GMAC) += gmac.o
-+obj-$(CONFIG_SUN7I_GMAC) += gmac.o
- obj-$(CONFIG_SUNXI_AHCI) += ahci.o
- obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o
- obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -302,7 +302,7 @@ extern int soft_i2c_gpio_scl;
- #define CONFIG_PHYLIB
- #endif
-
--#ifdef CONFIG_SUNXI_GMAC
-+#ifdef CONFIG_SUN7I_GMAC
- #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
- #define CONFIG_PHY_ADDR 1
- #define CONFIG_MII /* MII PHY management */
---- a/scripts/build-whitelist.sh
-+++ b/scripts/build-whitelist.sh
-@@ -13,10 +13,10 @@ export LC_ALL=C LC_COLLATE=C
- # There are two independent greps. The first pulls out the component parts
- # of CONFIG_SYS_EXTRA_OPTIONS. An example is:
- #
--# SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)
-+# SUN7I_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)
- #
- # We want this to produce:
--# CONFIG_SUNXI_GMAC
-+# CONFIG_SUN7I_GMAC
- # CONFIG_AHCI
- # CONFIG_SATAPWR
- #
---- a/scripts/config_whitelist.txt
-+++ b/scripts/config_whitelist.txt
-@@ -2371,7 +2371,6 @@ CONFIG_STV0991_HZ_CLOCK
- CONFIG_ST_SMI
- CONFIG_SUNXI_AHCI
- CONFIG_SUNXI_EMAC
--CONFIG_SUNXI_GMAC
- CONFIG_SUNXI_GPIO
- CONFIG_SUNXI_MAX_FB_SIZE
- CONFIG_SUNXI_USB_PHYS
projects / openwrt / staging / ansuel.git / commitdiff