ARM: cns3xxx: Convert PCI to use generic config accessors

Convert the cns3xxx PCI driver to use the generic config access functions.

This changes accesses from __raw_readl/__raw_writel to readl/writel.

[arnd: remove extra open parenthesis]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org

diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 45d6bd09e6ef2940240134096f5fab8456e474aa..85fc72e875d28b0238dcc440fa8b265157bb620c 100644 (file)
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -54,8 +54,8 @@ static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
        return sysdata_to_cnspci(bus->sysdata);
 }
 
-static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
-                                 unsigned int devfn, int where)
+static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
+                                        unsigned int devfn, int where)
 {
        struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
        int busno = bus->number;
@@ -91,55 +91,22 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
 static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
                                   int where, int size, u32 *val)
 {
-       u32 v;
-       void __iomem *base;
+       int ret;
        u32 mask = (0x1ull << (size * 8)) - 1;
        int shift = (where % 4) * 8;
 
-       base = cns3xxx_pci_cfg_base(bus, devfn, where);
-       if (!base) {
-               *val = 0xffffffff;
-               return PCIBIOS_SUCCESSFUL;
-       }
-
-       v = __raw_readl(base);
+       ret = pci_generic_config_read32(bus, devfn, where, size, val);
 
-       if (bus->number == 0 && devfn == 0 &&
-                       (where & 0xffc) == PCI_CLASS_REVISION) {
+       if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
+           (where & 0xffc) == PCI_CLASS_REVISION)
                /*
                 * RC's class is 0xb, but Linux PCI driver needs 0x604
                 * for a PCIe bridge. So we must fixup the class code
                 * to 0x604 here.
                 */
-               v &= 0xff;
-               v |= 0x604 << 16;
-       }
-
-       *val = (v >> shift) & mask;
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-                                   int where, int size, u32 val)
-{
-       u32 v;
-       void __iomem *base;
-       u32 mask = (0x1ull << (size * 8)) - 1;
-       int shift = (where % 4) * 8;
-
-       base = cns3xxx_pci_cfg_base(bus, devfn, where);
-       if (!base)
-               return PCIBIOS_SUCCESSFUL;
-
-       v = __raw_readl(base);
-
-       v &= ~(mask << shift);
-       v |= (val & mask) << shift;
-
-       __raw_writel(v, base);
+               *val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
 
-       return PCIBIOS_SUCCESSFUL;
+       return ret;
 }
 
 static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
@@ -158,8 +125,9 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
 }
 
 static struct pci_ops cns3xxx_pcie_ops = {
+       .map_bus = cns3xxx_pci_map_bus,
        .read = cns3xxx_pci_read_config,
-       .write = cns3xxx_pci_write_config,
+       .write = pci_generic_config_write,
 };
 
 static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)