--- /dev/null
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include "global.h"
+
+void viafb_init_accel(void)
+{
+ viaparinfo->fbmem_free -= CURSOR_SIZE;
+ viaparinfo->cursor_start = viaparinfo->fbmem_free;
+ viaparinfo->fbmem_used += CURSOR_SIZE;
+
+ /* Reverse 8*1024 memory space for cursor image */
+ viaparinfo->fbmem_free -= (CURSOR_SIZE + VQ_SIZE);
+ viaparinfo->VQ_start = viaparinfo->fbmem_free;
+ viaparinfo->VQ_end = viaparinfo->VQ_start + VQ_SIZE - 1;
+ viaparinfo->fbmem_used += (CURSOR_SIZE + VQ_SIZE); }
+
+void viafb_init_2d_engine(void)
+{
+ u32 dwVQStartAddr, dwVQEndAddr;
+ u32 dwVQLen, dwVQStartL, dwVQEndL, dwVQStartEndH;
+
+ /* init 2D engine regs to reset 2D engine */
+ writel(0x0, viaparinfo->io_virt + VIA_REG_GEMODE);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_SRCPOS);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_DSTPOS);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_DIMENSION);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_PATADDR);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_FGCOLOR);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_BGCOLOR);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CLIPTL);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CLIPBR);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_OFFSET);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_KEYCONTROL);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_SRCBASE);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_DSTBASE);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_PITCH);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_MONOPAT1);
+
+ /* Init AGP and VQ regs */
+ switch (viaparinfo->chip_info->gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ writel(0x00100000, viaparinfo->io_virt + VIA_REG_CR_TRANSET);
+ writel(0x680A0000, viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(0x02000000, viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ break;
+
+ default:
+ writel(0x00100000, viaparinfo->io_virt + VIA_REG_TRANSET);
+ writel(0x00000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x00333004, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x60000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x61000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x62000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x63000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x64000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x7D000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+
+ writel(0xFE020000, viaparinfo->io_virt + VIA_REG_TRANSET);
+ writel(0x00000000, viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ break;
+ }
+ if (viaparinfo->VQ_start != 0) {
+ /* Enable VQ */
+ dwVQStartAddr = viaparinfo->VQ_start;
+ dwVQEndAddr = viaparinfo->VQ_end;
+
+ dwVQStartL = 0x50000000 | (dwVQStartAddr & 0xFFFFFF);
+ dwVQEndL = 0x51000000 | (dwVQEndAddr & 0xFFFFFF);
+ dwVQStartEndH = 0x52000000 |
+ ((dwVQStartAddr & 0xFF000000) >> 24) |
+ ((dwVQEndAddr & 0xFF000000) >> 16);
+ dwVQLen = 0x53000000 | (VQ_SIZE >> 3);
+ switch (viaparinfo->chip_info->gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ dwVQStartL |= 0x20000000;
+ dwVQEndL |= 0x20000000;
+ dwVQStartEndH |= 0x20000000;
+ dwVQLen |= 0x20000000;
+ break;
+ default:
+ break;
+ }
+
+ switch (viaparinfo->chip_info->gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ writel(0x00100000,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSET);
+ writel(dwVQStartEndH,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(dwVQStartL,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(dwVQEndL,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(dwVQLen,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(0x74301001,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ writel(0x00000000,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ break;
+ default:
+ writel(0x00FE0000,
+ viaparinfo->io_virt + VIA_REG_TRANSET);
+ writel(0x080003FE,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0A00027C,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0B000260,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0C000274,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0D000264,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0E000000,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x0F000020,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x1000027E,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x110002FE,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x200F0060,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+
+ writel(0x00000006,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x40008C0F,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x44000000,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x45080C04,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x46800408,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+
+ writel(dwVQStartEndH,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(dwVQStartL,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(dwVQEndL,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(dwVQLen,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ break;
+ }
+ } else {
+ /* Disable VQ */
+ switch (viaparinfo->chip_info->gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ writel(0x00100000,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSET);
+ writel(0x74301000,
+ viaparinfo->io_virt + VIA_REG_CR_TRANSPACE);
+ break;
+ default:
+ writel(0x00FE0000,
+ viaparinfo->io_virt + VIA_REG_TRANSET);
+ writel(0x00000004,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x40008C0F,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x44000000,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x45080C04,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ writel(0x46800408,
+ viaparinfo->io_virt + VIA_REG_TRANSPACE);
+ break;
+ }
+ }
+
+ viafb_set_2d_color_depth(viaparinfo->bpp);
+
+ writel(0x0, viaparinfo->io_virt + VIA_REG_SRCBASE);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_DSTBASE);
+
+ writel(VIA_PITCH_ENABLE |
+ (((viaparinfo->hres *
+ viaparinfo->bpp >> 3) >> 3) | (((viaparinfo->hres *
+ viaparinfo->
+ bpp >> 3) >> 3) << 16)),
+ viaparinfo->io_virt + VIA_REG_PITCH);
+}
+
+void viafb_set_2d_color_depth(int bpp)
+{
+ u32 dwGEMode;
+
+ dwGEMode = readl(viaparinfo->io_virt + 0x04) & 0xFFFFFCFF;
+
+ switch (bpp) {
+ case 16:
+ dwGEMode |= VIA_GEM_16bpp;
+ break;
+ case 32:
+ dwGEMode |= VIA_GEM_32bpp;
+ break;
+ default:
+ dwGEMode |= VIA_GEM_8bpp;
+ break;
+ }
+
+ /* Set BPP and Pitch */
+ writel(dwGEMode, viaparinfo->io_virt + VIA_REG_GEMODE);
+}
+
+void viafb_hw_cursor_init(void)
+{
+ /* Set Cursor Image Base Address */
+ writel(viaparinfo->cursor_start,
+ viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_POS);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_ORG);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_BG);
+ writel(0x0, viaparinfo->io_virt + VIA_REG_CURSOR_FG);
+}
+
+void viafb_show_hw_cursor(struct fb_info *info, int Status)
+{
+ u32 temp;
+ u32 iga_path = ((struct viafb_par *)(info->par))->iga_path;
+
+ temp = readl(viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
+ switch (Status) {
+ case HW_Cursor_ON:
+ temp |= 0x1;
+ break;
+ case HW_Cursor_OFF:
+ temp &= 0xFFFFFFFE;
+ break;
+ }
+ switch (iga_path) {
+ case IGA2:
+ temp |= 0x80000000;
+ break;
+ case IGA1:
+ default:
+ temp &= 0x7FFFFFFF;
+ }
+ writel(temp, viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
+}
+
+int viafb_wait_engine_idle(void)
+{
+ int loop = 0;
+
+ while (!(readl(viaparinfo->io_virt + VIA_REG_STATUS) &
+ VIA_VR_QUEUE_BUSY) && (loop++ < MAXLOOP))
+ cpu_relax();
+
+ while ((readl(viaparinfo->io_virt + VIA_REG_STATUS) &
+ (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY)) &&
+ (loop++ < MAXLOOP))
+ cpu_relax();
+
+ return loop >= MAXLOOP;
+}
--- /dev/null
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ACCEL_H__
+#define __ACCEL_H__
+
+#define FB_ACCEL_VIA_UNICHROME 50
+
+/* MMIO Base Address Definition */
+#define MMIO_VGABASE 0x8000
+#define MMIO_CR_READ (MMIO_VGABASE + 0x3D4)
+#define MMIO_CR_WRITE (MMIO_VGABASE + 0x3D5)
+#define MMIO_SR_READ (MMIO_VGABASE + 0x3C4)
+#define MMIO_SR_WRITE (MMIO_VGABASE + 0x3C5)
+
+/* HW Cursor Status Define */
+#define HW_Cursor_ON 0
+#define HW_Cursor_OFF 1
+
+#define CURSOR_SIZE (8 * 1024)
+#define VQ_SIZE (256 * 1024)
+
+#define VIA_MMIO_BLTBASE 0x200000
+#define VIA_MMIO_BLTSIZE 0x200000
+
+/* Defines for 2D registers */
+#define VIA_REG_GECMD 0x000
+#define VIA_REG_GEMODE 0x004
+#define VIA_REG_SRCPOS 0x008
+#define VIA_REG_DSTPOS 0x00C
+/* width and height */
+#define VIA_REG_DIMENSION 0x010
+#define VIA_REG_PATADDR 0x014
+#define VIA_REG_FGCOLOR 0x018
+#define VIA_REG_BGCOLOR 0x01C
+/* top and left of clipping */
+#define VIA_REG_CLIPTL 0x020
+/* bottom and right of clipping */
+#define VIA_REG_CLIPBR 0x024
+#define VIA_REG_OFFSET 0x028
+/* color key control */
+#define VIA_REG_KEYCONTROL 0x02C
+#define VIA_REG_SRCBASE 0x030
+#define VIA_REG_DSTBASE 0x034
+/* pitch of src and dst */
+#define VIA_REG_PITCH 0x038
+#define VIA_REG_MONOPAT0 0x03C
+#define VIA_REG_MONOPAT1 0x040
+/* from 0x100 to 0x1ff */
+#define VIA_REG_COLORPAT 0x100
+
+/* VIA_REG_PITCH(0x38): Pitch Setting */
+#define VIA_PITCH_ENABLE 0x80000000
+
+/* defines for VIA HW cursor registers */
+#define VIA_REG_CURSOR_MODE 0x2D0
+#define VIA_REG_CURSOR_POS 0x2D4
+#define VIA_REG_CURSOR_ORG 0x2D8
+#define VIA_REG_CURSOR_BG 0x2DC
+#define VIA_REG_CURSOR_FG 0x2E0
+
+/* VIA_REG_GEMODE(0x04): GE mode */
+#define VIA_GEM_8bpp 0x00000000
+#define VIA_GEM_16bpp 0x00000100
+#define VIA_GEM_32bpp 0x00000300
+
+/* VIA_REG_GECMD(0x00): 2D Engine Command */
+#define VIA_GEC_NOOP 0x00000000
+#define VIA_GEC_BLT 0x00000001
+#define VIA_GEC_LINE 0x00000005
+
+/* Rotate Command */
+#define VIA_GEC_ROT 0x00000008
+
+#define VIA_GEC_SRC_XY 0x00000000
+#define VIA_GEC_SRC_LINEAR 0x00000010
+#define VIA_GEC_DST_XY 0x00000000
+#define VIA_GEC_DST_LINRAT 0x00000020
+
+#define VIA_GEC_SRC_FB 0x00000000
+#define VIA_GEC_SRC_SYS 0x00000040
+#define VIA_GEC_DST_FB 0x00000000
+#define VIA_GEC_DST_SYS 0x00000080
+
+/* source is mono */
+#define VIA_GEC_SRC_MONO 0x00000100
+/* pattern is mono */
+#define VIA_GEC_PAT_MONO 0x00000200
+/* mono src is opaque */
+#define VIA_GEC_MSRC_OPAQUE 0x00000000
+/* mono src is transparent */
+#define VIA_GEC_MSRC_TRANS 0x00000400
+/* pattern is in frame buffer */
+#define VIA_GEC_PAT_FB 0x00000000
+/* pattern is from reg setting */
+#define VIA_GEC_PAT_REG 0x00000800
+
+#define VIA_GEC_CLIP_DISABLE 0x00000000
+#define VIA_GEC_CLIP_ENABLE 0x00001000
+
+#define VIA_GEC_FIXCOLOR_PAT 0x00002000
+
+#define VIA_GEC_INCX 0x00000000
+#define VIA_GEC_DECY 0x00004000
+#define VIA_GEC_INCY 0x00000000
+#define VIA_GEC_DECX 0x00008000
+/* mono pattern is opaque */
+#define VIA_GEC_MPAT_OPAQUE 0x00000000
+/* mono pattern is transparent */
+#define VIA_GEC_MPAT_TRANS 0x00010000
+
+#define VIA_GEC_MONO_UNPACK 0x00000000
+#define VIA_GEC_MONO_PACK 0x00020000
+#define VIA_GEC_MONO_DWORD 0x00000000
+#define VIA_GEC_MONO_WORD 0x00040000
+#define VIA_GEC_MONO_BYTE 0x00080000
+
+#define VIA_GEC_LASTPIXEL_ON 0x00000000
+#define VIA_GEC_LASTPIXEL_OFF 0x00100000
+#define VIA_GEC_X_MAJOR 0x00000000
+#define VIA_GEC_Y_MAJOR 0x00200000
+#define VIA_GEC_QUICK_START 0x00800000
+
+/* defines for VIA 3D registers */
+#define VIA_REG_STATUS 0x400
+#define VIA_REG_CR_TRANSET 0x41C
+#define VIA_REG_CR_TRANSPACE 0x420
+#define VIA_REG_TRANSET 0x43C
+#define VIA_REG_TRANSPACE 0x440
+
+/* VIA_REG_STATUS(0x400): Engine Status */
+
+/* Command Regulator is busy */
+#define VIA_CMD_RGTR_BUSY 0x00000080
+/* 2D Engine is busy */
+#define VIA_2D_ENG_BUSY 0x00000002
+/* 3D Engine is busy */
+#define VIA_3D_ENG_BUSY 0x00000001
+/* Virtual Queue is busy */
+#define VIA_VR_QUEUE_BUSY 0x00020000
+
+#define MAXLOOP 0xFFFFFF
+
+void viafb_init_accel(void);
+void viafb_init_2d_engine(void);
+void set_2d_color_depth(int);
+void viafb_hw_cursor_init(void);
+void viafb_show_hw_cursor(struct fb_info *info, int Status); int
+viafb_wait_engine_idle(void); void viafb_set_2d_color_depth(int bpp);
+
+#endif /* __ACCEL_H__ */
projects / openwrt / staging / blogic.git / commitdiff