$(eval $(call KernelPackage,crypto-hw-hifn-795x))
-define KernelPackage/crypto-hw-omap
- TITLE:=TI OMAP hardware crypto modules
- DEPENDS:=@TARGET_omap
- KCONFIG:= \
- CONFIG_CRYPTO_HW=y \
- CONFIG_CRYPTO_DEV_OMAP_AES \
- CONFIG_CRYPTO_DEV_OMAP_DES \
- CONFIG_CRYPTO_DEV_OMAP_SHAM
-ifneq ($(wildcard $(LINUX_DIR)/drivers/crypto/omap-des.ko),)
- FILES:= \
- $(LINUX_DIR)/drivers/crypto/omap-aes.ko \
- $(LINUX_DIR)/drivers/crypto/omap-des.ko \
- $(LINUX_DIR)/drivers/crypto/omap-sham.ko
- AUTOLOAD:=$(call AutoLoad,90,omap-aes omap-des omap-sham)
-else
- FILES:= \
- $(LINUX_DIR)/drivers/crypto/omap-aes.ko \
- $(LINUX_DIR)/drivers/crypto/omap-sham.ko
- AUTOLOAD:=$(call AutoLoad,90,omap-aes omap-sham)
-endif
- $(call AddDepends/crypto,+kmod-crypto-manager +kmod-crypto-hash)
-endef
-
-define KernelPackage/crypto-hw-omap/description
- Kernel support for the TI OMAP HW crypto engine.
-endef
-
-$(eval $(call KernelPackage,crypto-hw-omap))
-
-
define KernelPackage/crypto-authenc
TITLE:=Combined mode wrapper for IPsec
DEPENDS:=+kmod-crypto-manager +LINUX_4_4:kmod-crypto-null
CONFIG_USB_MUSB_HOST=n \
CONFIG_USB_MUSB_DEBUG=y
DEPENDS:= \
- @(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
- +TARGET_omap24xx:kmod-usb-musb-tusb6010
+ @TARGET_omap24xx +kmod-usb-gadget +kmod-usb-musb-tusb6010
FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
$(call AddDepends/usb)
$(eval $(call KernelPackage,usb-musb-hdrc))
-define KernelPackage/usb-musb-platformglue
- TITLE:=MUSB platform glue layer
- KCONFIG:= \
- CONFIG_USB_MUSB_TUSB6010=n \
- CONFIG_USB_MUSB_OMAP2PLUS=n \
- CONFIG_USB_MUSB_AM35X=n \
- CONFIG_USB_MUSB_DSPS \
- CONFIG_USB_MUSB_UX500=n
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
- FILES:= \
- $(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
- $(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-control musb_dsps musb_am335x)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-platformglue/description
- MUSB platform glue modules
-endef
-
-$(eval $(call KernelPackage,usb-musb-platformglue))
-
-
define KernelPackage/usb-musb-tusb6010
TITLE:=Support for TUSB 6010
KCONFIG:=CONFIG_USB_MUSB_TUSB6010
$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-phy-am335x
- TITLE:=Support for AM335x USB PHY
- KCONFIG:= \
- CONFIG_AM335X_PHY_USB \
- CONFIG_AM335X_CONTROL_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
- FILES:= \
- $(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
- $(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
- AUTOLOAD:=$(call AutoLoad,44,phy-am335x)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-am335x/description
- Support for AM335x USB PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-am335x))
-
-
-define KernelPackage/usb-phy-omap-usb2
- TITLE:=Support for OMAP2 USB PHY
- KCONFIG:= \
- CONFIG_OMAP_USB2 \
- CONFIG_OMAP_CONTROL_PHY
- DEPENDS:=@TARGET_omap
- FILES:= \
- $(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
- $(LINUX_DIR)/drivers/phy/phy-omap-control.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-control phy-omap-usb2)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-omap-usb2/description
- Support for AM335x USB PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-omap-usb2))
-
-
-define KernelPackage/usb-phy-omap-usb3
- TITLE:=Support for OMAP USB3 PHY
- KCONFIG:=CONFIG_OMAP_USB3
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
- FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-omap-usb3/description
- Support for OMAP USB3 PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-omap-usb3))
-
-
-define KernelPackage/usb-phy-twl4030
- TITLE:=Support for TWL4030 OTG PHY
- KCONFIG:=CONFIG_TWL4030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
- FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-twl4030/description
- Support for TWL4030/TWL5030/TPS659x0 OTG PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-twl4030))
-
-
-define KernelPackage/usb-phy-twl6030
- TITLE:=Support for TWL6030 OTG PHY
- KCONFIG:=CONFIG_TWL6030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
- FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-twl6030/description
- Support for TWL6030 OTG PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-twl6030))
-
-
define KernelPackage/usb-gadget
TITLE:=USB Gadget support
KCONFIG:=CONFIG_USB_GADGET
$(eval $(call KernelPackage,usb-ohci-pci))
-define KernelPackage/usb2-omap
- TITLE:=Support for USB2 for OMAP
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
- KCONFIG:=\
- CONFIG_MFD_OMAP_USB_HOST=y \
- CONFIG_USB_EHCI_HCD_OMAP
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-omap.ko
- AUTOLOAD:=$(call AutoLoad,39,ehci-omap)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb2-omap/description
- Kernel support for OMAP USB2 (EHCI) controllers
-endef
-
-$(eval $(call KernelPackage,usb2-omap))
-
define KernelPackage/usb-bcma
TITLE:=Support for BCMA USB controllers
DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
TITLE:=Support for USB3 controllers
DEPENDS:= \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
- +TARGET_omap:kmod-usb-phy-omap-usb3
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
KCONFIG:= \
CONFIG_USB_XHCI_HCD \
CONFIG_USB_XHCI_PCI \
CONFIG_ALIGNMENT_TRAP=y
+CONFIG_AM335X_CONTROL_USB=y
+CONFIG_AM335X_PHY_USB=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_OMAP_AES=y
+CONFIG_CRYPTO_DEV_OMAP_DES=y
+CONFIG_CRYPTO_DEV_OMAP_SHAM=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DDR=y
CONFIG_FRAME_POINTER=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
-# CONFIG_FB_OMAP2 is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HDMI=y
-CONFIG_HDQ_MASTER_OMAP=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HSI=y
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
+# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEON=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_SSI is not set
+CONFIG_OMAP_USB2=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_OPROFILE=y
CONFIG_OPTPROBES=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
-# CONFIG_SPI_OMAP24XX is not set
+CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SRAM=y
CONFIG_SRCU=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_USB=y
CONFIG_TWL4030_WATCHDOG=y
+# CONFIG_TWL6030_USB is not set
CONFIG_TWL6040_CORE=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_USB=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_DUAL_ROLE=y
+# CONFIG_USB_DWC3_GADGET is not set
+# CONFIG_USB_DWC3_HOST is not set
+CONFIG_USB_DWC3_OMAP=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_OMAP=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_MUSB_AM335X_CHILD=y
+# CONFIG_USB_MUSB_AM35X is not set
+CONFIG_USB_MUSB_DSPS=y
+CONFIG_USB_MUSB_DUAL_ROLE=y
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_USB_MUSB_TUSB6010=y
+CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_DWC3_OMAP is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
# CONFIG_USERIO is not set
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WKUP_M3_RPROC is not set
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_MIGRATE=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y