#include <linux/platform_data/mv88e6xxx.h>
#include <linux/netdevice.h>
#include <linux/gpio/consumer.h>
-#include <linux/phy.h>
#include <linux/phylink.h>
#include <net/dsa.h>
return port < chip->info->num_internal_phys;
}
-/* We expect the switch to perform auto negotiation if there is a real
- * phy. However, in the case of a fixed link phy, we force the port
- * settings from the fixed link settings.
- */
-static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int err;
-
- if (!phy_is_pseudo_fixed_link(phydev) &&
- mv88e6xxx_phy_is_internal(ds, port))
- return;
-
- mv88e6xxx_reg_lock(chip);
- err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
- phydev->duplex, phydev->pause,
- phydev->interface);
- mv88e6xxx_reg_unlock(chip);
-
- if (err && err != -EOPNOTSUPP)
- dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
-}
-
static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
unsigned long *mask,
struct phylink_link_state *state)
static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
.get_tag_protocol = mv88e6xxx_get_tag_protocol,
.setup = mv88e6xxx_setup,
- .adjust_link = mv88e6xxx_adjust_link,
.phylink_validate = mv88e6xxx_validate,
.phylink_mac_link_state = mv88e6xxx_link_state,
.phylink_mac_config = mv88e6xxx_mac_config,