This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79.
Specifications:
SoC: QCA9563
CPU: 750 MHz
Flash/RAM: 8 / 128 MiB
Ethernet: 3x 1G ports (QCA8337 switch)
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k)
Buttons, LEDs and network setup appear to be almost identical
to the v2 revision.
Powerline interface is connected to switch port 5 (Label LAN4).
Installation:
No "fresh" device was available for testing the factory image.
It is not known whether flashing via OEM firmware GUI is possible
or not. A discussion from 2018 [1] about that indicates a few
adjustments are necessary, but it is not clear whether those
are already implemented with the TPLINK_HEADER_VERSION = 2 or not.
Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be
changed to 0x86310001 to allow factory flashing.
[1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27
Recovery:
Recovery is only possible via serial.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_tplink_tl-wpa8630.dtsi"
+
+/ {
+ compatible = "tplink,tl-wpa8630-v1", "qca,qca9563";
+ model = "TP-Link TL-WPA8630 v1";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&keys {
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&partitions {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x010000 0x7d0000>;
+ };
+
+ partition@7e0000 {
+ label = "mib0";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&uboot 0x0fc00>;
+};
+
+&wmac {
+ mtd-mac-address = <&uboot 0x0fc00>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ pair {
+ label = "Pair button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "tp-link:green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "tp-link:green:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "tp-link:green:wifi5g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_tplink_tl-wpa8630.dtsi"
/ {
aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
label-mac-device = ð0;
};
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "tp-link:green:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- wifi2g {
- label = "tp-link:green:wifi2g";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wifi5g {
- label = "tp-link:green:wifi5g";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-export {
compatible = "gpio-export";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- pair {
- label = "Pair button";
- linux,code = <BTN_1>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- leds {
- label = "LED control button";
- linux,code = <BTN_0>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "WPS button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
};
-&spi {
- status = "okay";
-
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "factory-uboot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot";
- reg = <0x020000 0x020000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x040000 0x5e0000>;
- };
-
- partition@620000 {
- label = "partition-table";
- reg = <0x620000 0x010000>;
- read-only;
- };
- };
+&keys {
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
};
};
-&pcie {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&mdio0 {
- status = "okay";
+&partitions {
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
- phy-mask = <0>;
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
- qca,mib-poll-interval = <500>;
+ partition@40000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x040000 0x5e0000>;
+ };
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
+ partition@620000 {
+ label = "partition-table";
+ reg = <0x620000 0x010000>;
+ read-only;
};
};
ð0 {
- status = "okay";
-
- phy-handle = <&phy0>;
- phy-mode = "sgmii";
mtd-mac-address = <&mac 0x8>;
};
&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};
ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
;;
+tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
;;
+ tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
# port 5 (internal) is the power-line port
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
+ tplink,tl-wpa8630-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
+ ;;
tplink,tl-wr902ac-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)
tplink,re450-v1)
migrate_leds "re450:=tp-link:"
;;
+tplink,tl-wpa8630-v1)
+ migrate_leds "^tl-wpa8630:=tp-link:" \
+ ':wlan$=:wifi2g' ':wlan5$=:wifi5g'
+ ;;
wd,mynet-n750)
migrate_leds "wd:=mynet-n750:"
;;
endef
TARGET_DEVICES += tplink_tl-wdr4900-v2
+define Device/tplink_tl-wpa8630-v1
+ $(Device/tplink-8mlzma)
+ SOC := qca9563
+ DEVICE_MODEL := TL-WPA8630
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ TPLINK_HWID := 0x86300001
+ SUPPORTED_DEVICES += tl-wpa8630
+endef
+TARGET_DEVICES += tplink_tl-wpa8630-v1
+
define Device/tplink_tl-wpa8630p-v2
$(Device/tplink-safeloader)
SOC := qca9563