gemini: Bring up DSA switches
authorLinus Walleij <linus.walleij@linaro.org>
Wed, 9 Sep 2020 21:10:11 +0000 (23:10 +0200)
committerChristian Lamparter <chunkeey@gmail.com>
Fri, 25 Sep 2020 17:32:34 +0000 (19:32 +0200)
First group the interfaces on the DSA switch into the
right LAN/WAN groups. Tested successfully on the
D-Link DIR-685 with the RTL8366RB DSA switch.

The RTL8366RB is DSA custom tagged and now handled
by the kernel tag parser. (Backported.)

The Vitesse switches are not capable of supporting
DSA per-port tagging. We suspect they must be handled
using some custom VLAN set-up.

Cc: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[sorted devices alphabetically]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
target/linux/gemini/base-files/etc/board.d/02_network [new file with mode: 0755]

diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network
new file mode 100755 (executable)
index 0000000..f371956
--- /dev/null
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+dlink,dir-685)
+       # These are all connected to eth0 thru RTL8366RB
+       ucidef_set_interface "eth" ifname "eth0" protocol "none"
+       ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
+       ;;
+itian,sq201)
+       # These are all connected to eth1 thru VSC7395
+       ucidef_set_interface "eth" ifname "eth1" protocol "none"
+       ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+       ;;
+storlink,gemini324)
+       # These are all connected to eth1 thru VSC7385
+       ucidef_set_interface "eth" ifname "eth1" protocol "none"
+       ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+       ;;
+esac
+
+board_config_flush
+
+exit 0