--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_eap2x5-1port.dtsi"
+
+/ {
+ compatible = "tplink,eap225-v4", "qca,qca9563";
+ model = "TP-Link EAP225 v4";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&art {
+ precalibration_ath10k: pre-calibration@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+};
+
+ð0 {
+ phy-handle = <&phy6>;
+ phy-mode = "sgmii";
+};
+
+&mdio0 {
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ };
+};
+
+&pcie {
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ mac-address-increment = <1>;
+
+ nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+};
endef
TARGET_DEVICES += tplink_eap225-v3
+define Device/tplink_eap225-v4
+ $(Device/tplink-eap2x5)
+ SOC := qca9563
+ IMAGE_SIZE := 13824k
+ DEVICE_MODEL := EAP225
+ DEVICE_VARIANT := v4
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ TPLINK_BOARD_ID := EAP225-V3
+endef
+TARGET_DEVICES += tplink_eap225-v4
+
define Device/tplink_eap225-wall-v2
$(Device/tplink-eap2x5)
SOC := qca9561