Refreshed all patches.
Remove upstreamed:
- 551-loop-Better-discard-support-for-block-devices.patch
Fixed:
- CVE-2020-11884
- CVE-2020-12114
- CVE-2019-3016
- CVE-2020-11669
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
endif
LINUX_VERSION-4.14 = .180
-LINUX_VERSION-4.19 = .115
+LINUX_VERSION-4.19 = .122
LINUX_VERSION-5.4 = .39
LINUX_KERNEL_HASH-4.14.180 = 444ef973d9b6a6ea174e4a9086f0aea980d8575d13302e431ad688f22e27ed0e
-LINUX_KERNEL_HASH-4.19.115 = 11b2d97c8ea5ceb40c5e1d0bb87ad5b2b8c84560181bc60c0d28ec3a3e3801c2
+LINUX_KERNEL_HASH-4.19.122 = 5050268ec5cf003d96366d1611ecfa4ab6974125d6fa26cea1ccb81dd4df00a5
LINUX_KERNEL_HASH-5.4.39 = 5141965a61a7b1c538443782ec3ef25fe0c3f9cd4d70c4e9f969d16883f365c8
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
-@@ -1,2 +1,3 @@
+@@ -1,3 +1,4 @@
+obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
+ obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -1,3 +1,11 @@
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5232,7 +5232,7 @@ static void port_event(struct usb_hub *h
+@@ -5246,7 +5246,7 @@ static void port_event(struct usb_hub *h
u16 status = 0, unused;
port_dev->over_current_count++;
USB_PORT_FEAT_C_OVER_CURRENT);
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
-@@ -1993,6 +1993,85 @@ free_interfaces:
+@@ -2000,6 +2000,85 @@ free_interfaces:
if (cp->string == NULL &&
!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+};
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -565,6 +565,32 @@
+@@ -566,6 +566,32 @@
status = "disabled";
};
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
-@@ -2147,7 +2147,7 @@ static void bcmgenet_init_tx_ring(struct
+@@ -2150,7 +2150,7 @@ static void bcmgenet_init_tx_ring(struct
bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_PROD_INDEX);
bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_CONS_INDEX);
/* Disable rate control for now */
bcmgenet_tdma_ring_writel(priv, index, flow_period_val,
TDMA_FLOW_PERIOD);
-@@ -3576,9 +3576,12 @@ static int bcmgenet_probe(struct platfor
+@@ -3580,9 +3580,12 @@ static int bcmgenet_probe(struct platfor
netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
/* Set default coalescing parameters */
jtag_gpio22: jtag_gpio22 {
brcm,pins = <22 23 24 25 26 27>;
brcm,function = <BCM2835_FSEL_ALT4>;
-@@ -487,14 +460,6 @@
-
+@@ -488,14 +461,6 @@
+ status = "disabled";
};
- thermal: thermal@7e212000 {
aux: aux@7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
-@@ -660,12 +625,6 @@
+@@ -661,12 +626,6 @@
phy-names = "usb2-phy";
};
* have been called previously. Use for set_configuration, set_interface,
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
-@@ -1113,6 +1113,21 @@ static void remove_intf_ep_devs(struct u
+@@ -1120,6 +1120,21 @@ static void remove_intf_ep_devs(struct u
intf->ep_devs_created = 0;
}
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
-@@ -1425,6 +1425,103 @@ command_cleanup:
+@@ -1427,6 +1427,103 @@ command_cleanup:
}
/*
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*/
-@@ -5217,6 +5314,7 @@ static const struct hc_driver xhci_hc_dr
+@@ -5219,6 +5316,7 @@ static const struct hc_driver xhci_hc_dr
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
-@@ -1087,10 +1087,12 @@ static int vc4_hdmi_audio_init(struct vc
+@@ -1099,10 +1099,12 @@ static int vc4_hdmi_audio_init(struct vc
struct device *dev = &hdmi->pdev->dev;
const __be32 *addr;
int ret;
static inline void bcmgenet_writel(u32 value, void __iomem *offset)
{
/* MIPS chips strapped for BE will automagically configure the
-@@ -1993,6 +1997,11 @@ static void reset_umac(struct bcmgenet_p
+@@ -1996,6 +2000,11 @@ static void reset_umac(struct bcmgenet_p
bcmgenet_rbuf_ctrl_set(priv, 0);
udelay(10);
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2046,6 +2055,9 @@ build_r4000_tlbchange_handler_head(u32 *
+@@ -2049,6 +2058,9 @@ build_r4000_tlbchange_handler_head(u32 *
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
-@@ -2092,6 +2104,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+@@ -2095,6 +2107,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
#define INADDR_ANY ((unsigned long int) 0x00000000)
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
-@@ -949,7 +949,7 @@ static int inet_abc_len(__be32 addr)
+@@ -954,7 +954,7 @@ static int inet_abc_len(__be32 addr)
{
int rc = -1; /* Something else, probably a multicast. */
rc = 0;
else {
__u32 haddr = ntohl(addr);
-@@ -960,6 +960,8 @@ static int inet_abc_len(__be32 addr)
+@@ -965,6 +965,8 @@ static int inet_abc_len(__be32 addr)
rc = 16;
else if (IN_CLASSC(haddr))
rc = 24;
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
-@@ -764,6 +764,7 @@ static const struct nand_ops spinand_ops
+@@ -762,6 +762,7 @@ static const struct nand_ops spinand_ops
static const struct spinand_manufacturer *spinand_manufacturers[] = {
¯onix_spinand_manufacturer,
µn_spinand_manufacturer,
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
-@@ -762,6 +762,7 @@ static const struct nand_ops spinand_ops
+@@ -760,6 +760,7 @@ static const struct nand_ops spinand_ops
};
static const struct spinand_manufacturer *spinand_manufacturers[] = {
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
-@@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand
+@@ -851,7 +851,7 @@ spinand_select_op_variant(struct spinand
*/
int spinand_match_and_init(struct spinand_device *spinand,
const struct spinand_info *table,
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
-@@ -765,6 +765,7 @@ static const struct spinand_manufacturer
+@@ -763,6 +763,7 @@ static const struct spinand_manufacturer
&gigadevice_spinand_manufacturer,
¯onix_spinand_manufacturer,
µn_spinand_manufacturer,
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
-@@ -460,7 +460,7 @@ static void lo_complete_rq(struct reques
+@@ -461,7 +461,7 @@ static void lo_complete_rq(struct reques
if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
req_op(rq) != REQ_OP_READ) {
if (cmd->ret < 0)
goto end_io;
}
-@@ -1904,7 +1904,10 @@ static void loop_handle_cmd(struct loop_
+@@ -1924,7 +1924,10 @@ static void loop_handle_cmd(struct loop_
failed:
/* complete non-aio request */
if (!cmd->use_aio || ret) {
+++ /dev/null
-From 3117c3f45edbcc269baaebd3d13f39b7bf884aa6 Mon Sep 17 00:00:00 2001
-From: Evan Green <evgreen@chromium.org>
-Date: Thu, 14 Nov 2019 15:50:08 -0800
-Subject: loop: Better discard support for block devices
-
-If the backing device for a loop device is itself a block device,
-then mirror the "write zeroes" capabilities of the underlying
-block device into the loop device. Copy this capability into both
-max_write_zeroes_sectors and max_discard_sectors of the loop device.
-
-The reason for this is that REQ_OP_DISCARD on a loop device translates
-into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
-presents a consistent interface for loop devices (that discarded data
-is zeroed), regardless of the backing device type of the loop device.
-There should be no behavior change for loop devices backed by regular
-files.
-
-This change fixes blktest block/003, and removes an extraneous
-error print in block/013 when testing on a loop device backed
-by a block device that does not support discard.
-
-Signed-off-by: Evan Green <evgreen@chromium.org>
-Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
-Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
----
- drivers/block/loop.c | 40 +++++++++++++++++++++++++++++-----------
- 1 file changed, 29 insertions(+), 11 deletions(-)
-
---- a/drivers/block/loop.c
-+++ b/drivers/block/loop.c
-@@ -426,11 +426,12 @@ static int lo_fallocate(struct loop_devi
- * information.
- */
- struct file *file = lo->lo_backing_file;
-+ struct request_queue *q = lo->lo_queue;
- int ret;
-
- mode |= FALLOC_FL_KEEP_SIZE;
-
-- if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
-+ if (!blk_queue_discard(q)) {
- ret = -EOPNOTSUPP;
- goto out;
- }
-@@ -863,6 +864,21 @@ static void loop_config_discard(struct l
- struct file *file = lo->lo_backing_file;
- struct inode *inode = file->f_mapping->host;
- struct request_queue *q = lo->lo_queue;
-+ struct request_queue *backingq;
-+
-+ /*
-+ * If the backing device is a block device, mirror its zeroing
-+ * capability. REQ_OP_DISCARD translates to a zero-out even when backed
-+ * by block devices to keep consistent behavior with file-backed loop
-+ * devices.
-+ */
-+ if (S_ISBLK(inode->i_mode) && !lo->lo_encrypt_key_size) {
-+ backingq = bdev_get_queue(inode->i_bdev);
-+ blk_queue_max_discard_sectors(q,
-+ backingq->limits.max_write_zeroes_sectors);
-+
-+ blk_queue_max_write_zeroes_sectors(q,
-+ backingq->limits.max_write_zeroes_sectors);
-
- /*
- * We use punch hole to reclaim the free space used by the
-@@ -870,22 +886,24 @@ static void loop_config_discard(struct l
- * encryption is enabled, because it may give an attacker
- * useful information.
- */
-- if ((!file->f_op->fallocate) ||
-- lo->lo_encrypt_key_size) {
-+ } else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
- q->limits.discard_granularity = 0;
- q->limits.discard_alignment = 0;
- blk_queue_max_discard_sectors(q, 0);
- blk_queue_max_write_zeroes_sectors(q, 0);
-- blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
-- return;
-- }
-
-- q->limits.discard_granularity = inode->i_sb->s_blocksize;
-- q->limits.discard_alignment = 0;
-+ } else {
-+ q->limits.discard_granularity = inode->i_sb->s_blocksize;
-+ q->limits.discard_alignment = 0;
-
-- blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
-- blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
-- blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
-+ blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
-+ blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
-+ }
-+
-+ if (q->limits.max_write_zeroes_sectors)
-+ blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
-+ else
-+ blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
- }
-
- static void loop_unprepare_queue(struct loop_device *lo)
if (!pe)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
-@@ -2752,6 +2752,8 @@ static const struct seq_operations vmall
+@@ -2764,6 +2764,8 @@ static const struct seq_operations vmall
static int __init proc_vmalloc_init(void)
{
drivers/platform/Makefile | 1 +
2 files changed, 3 insertions(+)
-diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
-index c11db8b..0283f0b 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
-@@ -10,3 +10,5 @@
+@@ -10,3 +10,5 @@ source "drivers/platform/goldfish/Kconfi
source "drivers/platform/chrome/Kconfig"
-
+
source "drivers/platform/mellanox/Kconfig"
+
+source "drivers/platform/mikrotik/Kconfig"
-diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
-index d3a6630..ad290c3 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
-@@ -9,3 +9,4 @@
+@@ -9,3 +9,4 @@ obj-$(CONFIG_MIPS) += mips/
obj-$(CONFIG_OLPC) += olpc/
obj-$(CONFIG_GOLDFISH) += goldfish/
obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
+obj-$(CONFIG_MIKROTIK) += mikrotik/
---
-2.11.0
-
drivers/mtd/parsers/Makefile | 1 +
2 files changed, 10 insertions(+)
-diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
-index de6f5f8..0afa89c 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
-@@ -22,3 +22,12 @@ config MTD_SHARPSL_PARTS
+@@ -14,3 +14,12 @@ config MTD_SHARPSL_PARTS
This provides the read-only FTL logic necessary to read the partition
table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
partition parser using this code.
+ flash, some of which are fixed and some of which are located at
+ variable offsets. This parser handles both cases via properly
+ formatted DTS.
-diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
-index 44ff342..0543362 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -1,2 +1,3 @@
__u16 tc_index; /* traffic control index */
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -5456,6 +5456,9 @@ static enum gro_result dev_gro_receive(s
+@@ -5457,6 +5457,9 @@ static enum gro_result dev_gro_receive(s
int same_flow;
int grow;
if (netif_elide_gro(skb->dev))
goto normal;
-@@ -7114,6 +7117,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -7115,6 +7118,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info,
-@@ -7164,6 +7209,7 @@ static int __netdev_upper_dev_link(struc
+@@ -7165,6 +7210,7 @@ static int __netdev_upper_dev_link(struc
if (ret)
return ret;
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
ret = notifier_to_errno(ret);
-@@ -7256,6 +7302,7 @@ void netdev_upper_dev_unlink(struct net_
+@@ -7257,6 +7303,7 @@ void netdev_upper_dev_unlink(struct net_
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
-@@ -7895,6 +7942,7 @@ int dev_set_mac_address(struct net_devic
+@@ -7896,6 +7943,7 @@ int dev_set_mac_address(struct net_devic
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
/*
* The Mellanox Tavor device gives false positive parity errors. Mark this
* device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3147,6 +3148,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3213,6 +3214,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
* To work around this, query the size it should be configured to by the
-@@ -3172,6 +3175,8 @@ static void quirk_intel_ntb(struct pci_d
+@@ -3238,6 +3241,8 @@ static void quirk_intel_ntb(struct pci_d
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled, even
* though no one is handling them (e.g., if the i915 driver is never
-@@ -3210,6 +3215,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3276,6 +3281,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
projects / openwrt / staging / ynezz.git / commitdiff