[PATCH] sata_sil24: use ata_wait_register()

Replace hard-coded waiting loops in sata_sil24 to ata_wait_register().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index d6cfd8eb29b9abd0d0792c11f752ad11dd287fa2..286c46e1f21c7a231095138b5d85f3f192100ea0 100644 (file)
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -432,8 +432,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
        struct sil24_port_priv *pp = ap->private_data;
        struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
        dma_addr_t paddr = pp->cmd_block_dma;
-       unsigned long timeout = jiffies + ATA_TMOUT_BOOT;
-       u32 irq_enable, irq_stat;
+       u32 mask, irq_enable, irq_stat;
        const char *reason;
 
        DPRINTK("ENTER\n");
@@ -459,16 +458,12 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
 
        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 
-       do {
-               irq_stat = readl(port + PORT_IRQ_STAT);
-               writel(irq_stat, port + PORT_IRQ_STAT);         /* clear irq */
+       mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+       irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
+                                    100, ATA_TMOUT_BOOT / HZ * 1000);
 
-               irq_stat >>= PORT_IRQ_RAW_SHIFT;
-               if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
-                       break;
-
-               msleep(100);
-       } while (time_before(jiffies, timeout));
+       writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
+       irq_stat >>= PORT_IRQ_RAW_SHIFT;
 
        /* restore IRQs */
        writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
@@ -937,14 +932,13 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        /* GPIO off */
        writel(0, host_base + HOST_FLASH_CMD);
 
-       /* Mask interrupts during initialization */
+       /* clear global reset & mask interrupts during initialization */
        writel(0, host_base + HOST_CTRL);
 
        for (i = 0; i < probe_ent->n_ports; i++) {
                void __iomem *port = port_base + i * PORT_REGS_SIZE;
                unsigned long portu = (unsigned long)port;
                u32 tmp;
-               int cnt;
 
                probe_ent->port[i].cmd_addr = portu + PORT_PRB;
                probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
@@ -958,13 +952,9 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                tmp = readl(port + PORT_CTRL_STAT);
                if (tmp & PORT_CS_PORT_RST) {
                        writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
-                       readl(port + PORT_CTRL_STAT);   /* sync */
-                       for (cnt = 0; cnt < 10; cnt++) {
-                               msleep(10);
-                               tmp = readl(port + PORT_CTRL_STAT);
-                               if (!(tmp & PORT_CS_PORT_RST))
-                                       break;
-                       }
+                       tmp = ata_wait_register(port + PORT_CTRL_STAT,
+                                               PORT_CS_PORT_RST,
+                                               PORT_CS_PORT_RST, 10, 100);
                        if (tmp & PORT_CS_PORT_RST)
                                dev_printk(KERN_ERR, &pdev->dev,
                                           "failed to clear port RST\n");