insmod usb8388.ko [fw_name=usb8388.bin]
-=====================
-IWPRIV COMMAND
-=====================
-
-NAME
- This manual describes the usage of private commands used in Marvell WLAN
- Linux Driver. All the commands available in Wlanconfig will not be available
- in the iwpriv.
-
-SYNOPSIS
- iwpriv <ethX> <command> [sub-command] ...
-
- iwpriv ethX setregioncode <n>
- iwpriv ethX getregioncode
-
-Version 5 Command:
- iwpriv ethX ledgpio <n>
-
-BT Commands:
- The blinding table (BT) contains a list of mac addresses that will be,
- by default, ignored by the firmware. It is also possible to invert this
- behavior so that we will ignore all traffic except for the portion
- coming from mac addresess in the list. It is primarily used for
- debugging and testing networks. It can be edited and inspected with
- the following commands:
-
- iwpriv ethX bt_reset
- iwpriv ethX bt_add <mac_address>
- iwpriv ethX bt_del <mac_address>
- iwpriv ethX bt_list <id>
- iwpriv ethX bt_get_invert <n>
- iwpriv ethX bt_set_invert <n>
-
-FWT Commands:
- The forwarding table (FWT) is a feature used to manage mesh network
- routing in the firmware. The FWT is essentially a routing table that
- associates a destination mac address (da) with a next hop receiver
- address (ra). The FWT can be inspected and edited with the following
- iwpriv commands, which are described in greater detail below.
- Eventually, the table will be automatically maintained by a custom
- routing protocol.
-
- NOTE: FWT commands replace the previous DFT commands. What were the DFT
- commands?, you might ask. They were an earlier API to the firmware that
- implemented a simple MAC-layer forwarding mechanism. In the unlikely
- event that you were using these commands, you must migrate to the new
- FWT commands which can be used to achieve the same functionality.
-
- iwpriv ethX fwt_add [parameters]
- iwpriv ethX fwt_del [parameters]
- iwpriv ethX fwt_lookup [parameters]
- iwpriv ethX fwt_list [parameters]
- iwpriv ethX fwt_list_route [parameters]
- iwpriv ethX fwt_list_neigh [parameters]
- iwpriv ethX fwt_reset [parameters]
- iwpriv ethX fwt_cleanup
- iwpriv ethX fwt_time
-
-MESH Commands:
-
- The MESH commands are used to configure various features of the mesh
- routing protocol. The following commands are supported:
-
- iwpriv ethX mesh_get_ttl
- iwpriv ethX mesh_set_ttl ttl
-
-DESCRIPTION
- Those commands are used to send additional commands to the Marvell WLAN
- card via the Linux device driver.
-
- The ethX parameter specifies the network device that is to be used to
- perform this command on. it could be eth0, eth1 etc.
-
-setregioncode
- This command is used to set the region code in the station.
- where value is 'region code' for various regions like
- USA FCC, Canada IC, Spain, France, Europe ETSI, Japan ...
-
- Usage:
- iwpriv ethX setregioncode 0x10: set region code to USA (0x10).
-
-getregioncode
- This command is used to get the region code information set in the
- station.
-
-ledgpio
- This command is used to set/get LEDs.
-
- iwpriv ethX ledgpio <LEDs>
- will set the corresponding LED for the GPIO Line.
-
- iwpriv ethX ledgpio
- will give u which LEDs are Enabled.
-
- Usage:
- iwpriv eth1 ledgpio 1 0 2 1 3 4
- will enable
- LED 1 -> GPIO 0
- LED 2 -> GPIO 1
- LED 3 -> GPIO 4
-
- iwpriv eth1 ledgpio
- shows LED information in the format as mentioned above.
-
- Note: LED0 is invalid
- Note: Maximum Number of LEDs are 16.
-
-fwt_add
- This command is used to insert an entry into the FWT table. The list of
- parameters must follow the following structure:
-
- iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr]
-
- The parameters between brackets are optional, but they must appear in
- the order specified. For example, if you want to specify the metric,
- you must also specify the dir, ssn, and dsn but you need not specify the
- hopcount, expiration, sleepmode, or snr. Any unspecified parameters
- will be assigned the defaults specified below.
-
- The different parameters are:-
- da -- DA MAC address in the form 00:11:22:33:44:55
- ra -- RA MAC address in the form 00:11:22:33:44:55
- metric -- route metric (cost: smaller-metric routes are
- preferred, default is 0)
- dir -- direction (1 for direct, 0 for reverse,
- default is 1)
- rate -- data rate used for transmission to the RA,
- as specified for the rateadapt command,
- default is 3 (11Mbps)
- ssn -- Source Sequence Number (time at the RA for
- reverse routes. Default is 0)
- dsn -- Destination Sequence Number (time at the DA
- for direct routes. Default is 0)
- hopcount -- hop count (currently unused, default is 0)
- ttl -- TTL (Only used in reverse entries)
- expiration -- entry expiration (in ticks, where a tick is
- 1024us, or ~ 1ms. Use 0 for an indefinite
- entry, default is 0)
- sleepmode -- RA's sleep mode (currently unused, default is
- 0)
- snr -- SNR in the link to RA (currently unused,
- default is 0)
-
- The command does not return anything.
-
-fwt_del
- This command is used to remove an entry to the FWT table. The list of
- parameters must follow the following structure:
-
- iwpriv ethX fwt_del da ra [dir]
-
- where the different parameters are:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- dir -- direction (1 for direct, 0 for reverse,
- default is 1)
-
- The command does not return anything.
-
-fwt_lookup
- This command is used to get the best route in the FWT table to a given
- host. The only parameter is the MAC address of the host that is being
- looked for.
-
- iwpriv ethX fwt_lookup da
-
- where:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
-
- The command returns an output string identical to the one returned by
- fwt_list described below.
-
-
-fwt_list
- This command is used to list a route from the FWT table. The only
- parameter is the index into the table. If you want to list all the
- routes in a table, start with index=0, and keep listing until you get a
- "(null)" string. Note that the indicies may change as the fwt is
- updated. It is expected that most users will not use fwt_list directly,
- but that a utility similar to the traditional route command will be used
- to invoke fwt_list over and over.
-
- iwpriv ethX fwt_list index
-
- The output is a string of the following form:
-
- da ra valid metric dir rate ssn dsn hopcount ttl expiration
- sleepmode snr precursor
-
- where the different fields are:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- valid -- whether the route is valid (0 if not valid)
- metric -- route metric (cost: smaller-metric routes are preferred)
- dir -- direction (1 for direct, 0 for reverse)
- rate -- data rate used for transmission to the RA,
- as specified for the rateadapt command
- ssn -- Source Sequence Number (time at the RA for reverse routes)
- dsn -- Destination Sequence Number (time at the DA for direct routes)
- hopcount -- hop count (currently unused)
- ttl -- TTL (only used in reverse entries)
- expiration -- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
- sleepmode -- RA's sleep mode (currently unused)
- snr -- SNR in the link to RA (currently unused)
- precursor -- predecessor in direct routes
-
-fwt_list_route
- This command is equivalent to fwt_list.
-
-fwt_list_neigh
- This command is used to list a neighbor from the FWT table. The only
- parameter is the neighbor ID. If you want to list all the neighbors in a
- table, start with nid=0, and keep incrementing nid until you get a
- "(null)" string. Note that the nid from a fwt_list_route command can be
- used as an input to this command. Also note that this command is meant
- mostly for debugging. It is expected that users will use fwt_lookup.
- One important reason for this is that the neighbor id may change as the
- neighbor table is altered.
-
- iwpriv ethX fwt_list_neigh nid
-
- The output is a string of the following form:
-
- ra sleepmode snr references
-
- where the different fields are:-
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- sleepmode -- RA's sleep mode (currently unused)
- snr -- SNR in the link to RA (currently unused)
- references -- RA's reference counter
-
-fwt_reset
- This command is used to reset the FWT table, getting rid of all the
- entries. There are no input parameters.
-
- iwpriv ethX fwt_reset
-
- The command does not return anything.
-
-fwt_cleanup
- This command is used to perform user-based garbage recollection. The
- FWT table is checked, and all the entries that are expired or invalid
- are cleaned. Note that this is exported to the driver for debugging
- purposes, as garbage collection is also fired by the firmware when in
- space problems. There are no input parameters.
-
- iwpriv ethX fwt_cleanup
-
- The command does returns the number of invalid/expired routes deleted.
-
-fwt_time
- This command returns a card's internal time representation. It is this
- time that is used to represent the expiration times of FWT entries. The
- number is not consistent from card to card; it is simply a timer count.
- The fwt_time command is used to inspect the timer so that expiration
- times reported by fwt_list can be properly interpreted.
-
- iwpriv ethX fwt_time
-
-mesh_get_ttl
-
- The mesh ttl is the number of hops a mesh packet can traverse before it
- is dropped. This parameter is used to prevent infinite loops in the
- mesh network. The value returned by this function is the ttl assigned
- to all mesh packets. Currently there is no way to control the ttl on a
- per packet or per socket basis.
-
- iwpriv ethX mesh_get_ttl
-
-mesh_set_ttl ttl
-
- Set the ttl. The argument must be between 0 and 255.
-
- iwpriv ethX mesh_set_ttl <ttl>
-
=========================
ETHTOOL
=========================
+++ /dev/null
-/**
- * This file contains ioctl functions
- */
-
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-
-#include <net/iw_handler.h>
-#include <net/ieee80211.h>
-
-#include "host.h"
-#include "radiotap.h"
-#include "decl.h"
-#include "defs.h"
-#include "dev.h"
-#include "join.h"
-#include "wext.h"
-
-#define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN + \
- IW_ESSID_MAX_SIZE + \
- IW_EV_UINT_LEN + IW_EV_FREQ_LEN + \
- IW_EV_QUAL_LEN + IW_ESSID_MAX_SIZE + \
- IW_EV_PARAM_LEN + 40) /* 40 for WPAIE */
-
-#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
-
-static int wlan_set_region(wlan_private * priv, u16 region_code)
-{
- int i;
- int ret = 0;
-
- for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
- // use the region code to search for the index
- if (region_code == libertas_region_code_to_index[i]) {
- priv->adapter->regiontableindex = (u16) i;
- priv->adapter->regioncode = region_code;
- break;
- }
- }
-
- // if it's unidentified region code
- if (i >= MRVDRV_MAX_REGION_CODE) {
- lbs_deb_ioctl("region Code not identified\n");
- ret = -1;
- goto done;
- }
-
- if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) {
- ret = -EINVAL;
- }
-
-done:
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-static inline int hex2int(char c)
-{
- if (c >= '0' && c <= '9')
- return (c - '0');
- if (c >= 'a' && c <= 'f')
- return (c - 'a' + 10);
- if (c >= 'A' && c <= 'F')
- return (c - 'A' + 10);
- return -1;
-}
-
-/* Convert a string representation of a MAC address ("xx:xx:xx:xx:xx:xx")
- into binary format (6 bytes).
-
- This function expects that each byte is represented with 2 characters
- (e.g., 11:2:11:11:11:11 is invalid)
-
- */
-static char *eth_str2addr(char *ethstr, u8 * addr)
-{
- int i, val, val2;
- char *pos = ethstr;
-
- /* get rid of initial blanks */
- while (*pos == ' ' || *pos == '\t')
- ++pos;
-
- for (i = 0; i < 6; i++) {
- val = hex2int(*pos++);
- if (val < 0)
- return NULL;
- val2 = hex2int(*pos++);
- if (val2 < 0)
- return NULL;
- addr[i] = (val * 16 + val2) & 0xff;
-
- if (i < 5 && *pos++ != ':')
- return NULL;
- }
- return pos;
-}
-
-/* this writes xx:xx:xx:xx:xx:xx into ethstr
- (ethstr must have space for 18 chars) */
-static int eth_addr2str(u8 * addr, char *ethstr)
-{
- int i;
- char *pos = ethstr;
-
- for (i = 0; i < 6; i++) {
- sprintf(pos, "%02x", addr[i] & 0xff);
- pos += 2;
- if (i < 5)
- *pos++ = ':';
- }
- return 17;
-}
-
-/**
- * @brief Add an entry to the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_add_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char ethaddrs_str[18];
- char *pos;
- u8 ethaddr[ETH_ALEN];
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
- sizeof(ethaddrs_str)))
- return -EFAULT;
-
- if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
- lbs_pr_info("BT_ADD: Invalid MAC address\n");
- return -EINVAL;
- }
-
- lbs_deb_ioctl("BT: adding %s\n", ethaddrs_str);
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_add,
- cmd_option_waitforrsp, 0, ethaddr);
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-/**
- * @brief Delete an entry from the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_del_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char ethaddrs_str[18];
- u8 ethaddr[ETH_ALEN];
- char *pos;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
- sizeof(ethaddrs_str)))
- return -EFAULT;
-
- if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
- lbs_pr_info("Invalid MAC address\n");
- return -EINVAL;
- }
-
- lbs_deb_ioctl("BT: deleting %s\n", ethaddrs_str);
-
- return (libertas_prepare_and_send_command(priv,
- cmd_bt_access,
- cmd_act_bt_access_del,
- cmd_option_waitforrsp, 0, ethaddr));
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Reset all entries from the BT table
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_reset_ioctl(wlan_private * priv)
-{
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_pr_alert( "BT: resetting\n");
-
- return (libertas_prepare_and_send_command(priv,
- cmd_bt_access,
- cmd_act_bt_access_reset,
- cmd_option_waitforrsp, 0, NULL));
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief List an entry from the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_list_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int pos;
- char *addr1;
- struct iwreq *wrq = (struct iwreq *)req;
- /* used to pass id and store the bt entry returned by the FW */
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
- static char outstr[64];
- char *pbuf = outstr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(outstr, wrq->u.data.pointer, sizeof(outstr))) {
- lbs_deb_ioctl("Copy from user failed\n");
- return -1;
- }
- param.id = simple_strtoul(outstr, NULL, 10);
- pos = sprintf(pbuf, "%d: ", param.id);
- pbuf += pos;
-
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_list,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
-
- if (ret == 0) {
- addr1 = param.addr1addr2;
-
- pos = sprintf(pbuf, "BT includes node ");
- pbuf += pos;
- pos = eth_addr2str(addr1, pbuf);
- pbuf += pos;
- } else {
- sprintf(pbuf, "(null)");
- pbuf += pos;
- }
-
- wrq->u.data.length = strlen(outstr);
- if (copy_to_user(wrq->u.data.pointer, (char *)outstr,
- wrq->u.data.length)) {
- lbs_deb_ioctl("BT_LIST: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0 ;
-}
-
-/**
- * @brief Sets inverted state of blacklist (non-zero if inverted)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_set_invert_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int ret;
- struct iwreq *wrq = (struct iwreq *)req;
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- param.id = SUBCMD_DATA(wrq) ;
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_set_invert,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
- if (ret != 0)
- return -EFAULT;
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets inverted state of blacklist (non-zero if inverted)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_get_invert_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- int ret;
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_get_invert,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(param.id);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Find the next parameter in an input string
- * @param ptr A pointer to the input parameter string
- * @return A pointer to the next parameter, or 0 if no parameters left.
- */
-static char * next_param(char * ptr)
-{
- if (!ptr) return NULL;
- while (*ptr == ' ' || *ptr == '\t') ++ptr;
- return (*ptr == '\0') ? NULL : ptr;
-}
-
-/**
- * @brief Add an entry to the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_add_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[128];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_ADD: Invalid MAC address 1\n");
- return -EINVAL;
- }
-
- if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
- lbs_pr_alert( "FWT_ADD: Invalid MAC address 2\n");
- return -EINVAL;
- }
-
- if ((ptr = next_param(ptr)))
- fwt_access.metric =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.metric = cpu_to_le32(FWT_DEFAULT_METRIC);
-
- if ((ptr = next_param(ptr)))
- fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.dir = FWT_DEFAULT_DIR;
-
- if ((ptr = next_param(ptr)))
- fwt_access.rate = (u8) simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.rate = FWT_DEFAULT_RATE;
-
- if ((ptr = next_param(ptr)))
- fwt_access.ssn =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.ssn = cpu_to_le32(FWT_DEFAULT_SSN);
-
- if ((ptr = next_param(ptr)))
- fwt_access.dsn =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.dsn = cpu_to_le32(FWT_DEFAULT_DSN);
-
- if ((ptr = next_param(ptr)))
- fwt_access.hopcount = simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.hopcount = FWT_DEFAULT_HOPCOUNT;
-
- if ((ptr = next_param(ptr)))
- fwt_access.ttl = simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.ttl = FWT_DEFAULT_TTL;
-
- if ((ptr = next_param(ptr)))
- fwt_access.expiration =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.expiration = cpu_to_le32(FWT_DEFAULT_EXPIRATION);
-
- if ((ptr = next_param(ptr)))
- fwt_access.sleepmode = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.sleepmode = FWT_DEFAULT_SLEEPMODE;
-
- if ((ptr = next_param(ptr)))
- fwt_access.snr =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.snr = cpu_to_le32(FWT_DEFAULT_SNR);
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18], ethaddr2_str[18];
- eth_addr2str(fwt_access.da, ethaddr1_str);
- eth_addr2str(fwt_access.ra, ethaddr2_str);
- lbs_deb_ioctl("FWT_ADD: adding (da:%s,%i,ra:%s)\n", ethaddr1_str,
- fwt_access.dir, ethaddr2_str);
- lbs_deb_ioctl("FWT_ADD: ssn:%u dsn:%u met:%u hop:%u ttl:%u exp:%u slp:%u snr:%u\n",
- fwt_access.ssn, fwt_access.dsn, fwt_access.metric,
- fwt_access.hopcount, fwt_access.ttl, fwt_access.expiration,
- fwt_access.sleepmode, fwt_access.snr);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_add,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-/**
- * @brief Delete an entry from the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_del_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_DEL: Invalid MAC address 1\n");
- return -EINVAL;
- }
-
- if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
- lbs_pr_alert( "FWT_DEL: Invalid MAC address 2\n");
- return -EINVAL;
- }
-
- if ((ptr = next_param(ptr)))
- fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.dir = FWT_DEFAULT_DIR;
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18], ethaddr2_str[18];
- lbs_deb_ioctl("FWT_DEL: line is %s\n", in_str);
- eth_addr2str(fwt_access.da, ethaddr1_str);
- eth_addr2str(fwt_access.ra, ethaddr2_str);
- lbs_deb_ioctl("FWT_DEL: removing (da:%s,ra:%s,dir:%d)\n", ethaddr1_str,
- ethaddr2_str, fwt_access.dir);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_del,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-
-/**
- * @brief Print route parameters
- * @param fwt_access struct cmd_ds_fwt_access with route info
- * @param buf destination buffer for route info
- */
-static void print_route(struct cmd_ds_fwt_access fwt_access, char *buf)
-{
- buf += sprintf(buf, " ");
- buf += eth_addr2str(fwt_access.da, buf);
- buf += sprintf(buf, " ");
- buf += eth_addr2str(fwt_access.ra, buf);
- buf += sprintf(buf, " %u", fwt_access.valid);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.metric));
- buf += sprintf(buf, " %u", fwt_access.dir);
- buf += sprintf(buf, " %u", fwt_access.rate);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.ssn));
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.dsn));
- buf += sprintf(buf, " %u", fwt_access.hopcount);
- buf += sprintf(buf, " %u", fwt_access.ttl);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.expiration));
- buf += sprintf(buf, " %u", fwt_access.sleepmode);
- buf += sprintf(buf, " %u ", le32_to_cpu(fwt_access.snr));
- buf += eth_addr2str(fwt_access.prec, buf);
-}
-
-/**
- * @brief Lookup an entry in the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_lookup_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- char *ptr;
- static struct cmd_ds_fwt_access fwt_access;
- static char out_str[128];
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_LOOKUP: Invalid MAC address\n");
- return -EINVAL;
- }
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18];
- lbs_deb_ioctl("FWT_LOOKUP: line is %s\n", in_str);
- eth_addr2str(fwt_access.da, ethaddr1_str);
- lbs_deb_ioctl("FWT_LOOKUP: looking for (da:%s)\n", ethaddr1_str);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_lookup,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- print_route(fwt_access, out_str);
- else
- sprintf(out_str, "(null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LOOKUP: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Reset all entries from the FWT table
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_reset_ioctl(wlan_private * priv)
-{
- lbs_deb_ioctl("FWT: resetting\n");
-
- return (libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_reset,
- cmd_option_waitforrsp, 0, NULL));
-}
-
-/**
- * @brief List an entry from the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[8];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret = 0;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) {
- ret = -EFAULT;
- goto out;
- }
-
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list,
- cmd_option_waitforrsp, 0, (void *)&fwt_access);
-
- if (ret == 0)
- print_route(fwt_access, pbuf);
- else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST: Copy to user failed!\n");
- ret = -EFAULT;
- goto out;
- }
-
- ret = 0;
-
-out:
- lbs_deb_leave(LBS_DEB_IOCTL);
- return ret;
-}
-
-/**
- * @brief List an entry from the FRT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_route_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST_ROUTE: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST_ROUTE: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list_route,
- cmd_option_waitforrsp, 0, (void *)&fwt_access);
-
- if (ret == 0) {
- print_route(fwt_access, pbuf);
- } else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST_ROUTE: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief List an entry from the FNT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_neighbor_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[8];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- memset(&fwt_access, 0, sizeof(fwt_access));
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list_neighbor,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0) {
- pbuf += sprintf(pbuf, " ra ");
- pbuf += eth_addr2str(fwt_access.ra, pbuf);
- pbuf += sprintf(pbuf, " slp %u", fwt_access.sleepmode);
- pbuf += sprintf(pbuf, " snr %u", le32_to_cpu(fwt_access.snr));
- pbuf += sprintf(pbuf, " ref %u", le32_to_cpu(fwt_access.references));
- } else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Cleans up the route (FRT) and neighbor (FNT) tables
- * (Garbage Collection)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- static struct cmd_ds_fwt_access fwt_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("FWT: cleaning up\n");
-
- memset(&fwt_access, 0, sizeof(fwt_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_cleanup,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(fwt_access.references);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets firmware internal time (debug purposes)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- static struct cmd_ds_fwt_access fwt_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("FWT: getting time\n");
-
- memset(&fwt_access, 0, sizeof(fwt_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_time,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(fwt_access.references);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets mesh ttl from firmware
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- struct cmd_ds_mesh_access mesh_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- memset(&mesh_access, 0, sizeof(mesh_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
- cmd_act_mesh_get_ttl,
- cmd_option_waitforrsp, 0,
- (void *)&mesh_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(mesh_access.data[0]);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets mesh ttl from firmware
- * @param priv A pointer to wlan_private structure
- * @param ttl New ttl value
- * @return 0 --success, otherwise fail
- */
-static int wlan_mesh_set_ttl_ioctl(wlan_private * priv, int ttl)
-{
- struct cmd_ds_mesh_access mesh_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if( (ttl > 0xff) || (ttl < 0) )
- return -EINVAL;
-
- memset(&mesh_access, 0, sizeof(mesh_access));
- mesh_access.data[0] = cpu_to_le32(ttl);
-
- ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
- cmd_act_mesh_set_ttl,
- cmd_option_waitforrsp, 0,
- (void *)&mesh_access);
-
- if (ret != 0)
- ret = -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return ret;
-}
-
-/**
- * @brief ioctl function - entry point
- *
- * @param dev A pointer to net_device structure
- * @param req A pointer to ifreq structure
- * @param cmd command
- * @return 0--success, otherwise fail
- */
-int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-{
- int subcmd = 0;
- int idata = 0;
- int *pdata;
- int ret = 0;
- wlan_private *priv = dev->priv;
- wlan_adapter *adapter = priv->adapter;
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
- switch (cmd) {
- case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
- switch (wrq->u.data.flags) {
- case WLAN_SUBCMD_BT_RESET: /* bt_reset */
- wlan_bt_reset_ioctl(priv);
- break;
- case WLAN_SUBCMD_FWT_RESET: /* fwt_reset */
- wlan_fwt_reset_ioctl(priv);
- break;
- } /* End of switch */
- break;
-
- case WLAN_SETONEINT_GETNONE:
- /* The first 4 bytes of req->ifr_data is sub-ioctl number
- * after 4 bytes sits the payload.
- */
- subcmd = wrq->u.data.flags;
- if (!subcmd)
- subcmd = (int)wrq->u.param.value;
-
- switch (subcmd) {
- case WLANSETREGION:
- idata = SUBCMD_DATA(wrq);
- ret = wlan_set_region(priv, (u16) idata);
- break;
- case WLAN_SUBCMD_MESH_SET_TTL:
- idata = SUBCMD_DATA(wrq);
- ret = wlan_mesh_set_ttl_ioctl(priv, idata);
- break;
-
- case WLAN_SUBCMD_BT_SET_INVERT:
- ret = wlan_bt_set_invert_ioctl(priv, req);
- break ;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
-
- break;
-
- case WLAN_SET128CHAR_GET128CHAR:
- switch ((int)wrq->u.data.flags) {
- case WLAN_SUBCMD_BT_ADD:
- ret = wlan_bt_add_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_BT_DEL:
- ret = wlan_bt_del_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_BT_LIST:
- ret = wlan_bt_list_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_ADD:
- ret = wlan_fwt_add_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_DEL:
- ret = wlan_fwt_del_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LOOKUP:
- ret = wlan_fwt_lookup_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST_NEIGHBOR:
- ret = wlan_fwt_list_neighbor_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST:
- ret = wlan_fwt_list_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST_ROUTE:
- ret = wlan_fwt_list_route_ioctl(priv, req);
- break;
- }
- break;
-
- case WLAN_SETNONE_GETONEINT:
- switch (wrq->u.param.value) {
- case WLANGETREGION:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->regioncode;
- break;
- case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
- ret = wlan_fwt_cleanup_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_FWT_TIME: /* fwt_time */
- ret = wlan_fwt_time_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_MESH_GET_TTL:
- ret = wlan_mesh_get_ttl_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_BT_GET_INVERT:
- ret = wlan_bt_get_invert_ioctl(priv, req);
- break ;
-
- default:
- ret = -EOPNOTSUPP;
-
- }
-
- break;
-
- case WLAN_SET_GET_SIXTEEN_INT:
- switch ((int)wrq->u.data.flags) {
- case WLAN_LED_GPIO_CTRL:
- {
- int i;
- int data[16];
-
- struct cmd_ds_802_11_led_ctrl ctrl;
- struct mrvlietypes_ledgpio *gpio =
- (struct mrvlietypes_ledgpio *) ctrl.data;
-
- memset(&ctrl, 0, sizeof(ctrl));
- if (wrq->u.data.length > MAX_LEDS * 2)
- return -ENOTSUPP;
- if ((wrq->u.data.length % 2) != 0)
- return -ENOTSUPP;
- if (wrq->u.data.length == 0) {
- ctrl.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) *
- wrq->u.data.length)) {
- lbs_deb_ioctl(
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- ctrl.action =
- cpu_to_le16
- (cmd_act_set);
- ctrl.numled = cpu_to_le16(0);
- gpio->header.type =
- cpu_to_le16(TLV_TYPE_LED_GPIO);
- gpio->header.len = wrq->u.data.length;
- for (i = 0; i < wrq->u.data.length;
- i += 2) {
- gpio->ledpin[i / 2].led =
- data[i];
- gpio->ledpin[i / 2].pin =
- data[i + 1];
- }
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_led_gpio_ctrl,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&ctrl);
- for (i = 0; i < gpio->header.len; i += 2) {
- data[i] = gpio->ledpin[i / 2].led;
- data[i + 1] = gpio->ledpin[i / 2].pin;
- }
- if (copy_to_user(wrq->u.data.pointer, data,
- sizeof(int) *
- gpio->header.len)) {
- lbs_deb_ioctl("Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = gpio->header.len;
- }
- break;
- }
- break;
-
- default:
- ret = -EINVAL;
- break;
- }
-
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-
projects / openwrt / staging / blogic.git / commitdiff