staging: comedi: adl_pci9118: prefer using the BIT macro

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index fb3043dcfff1e62b9cc318df55e82c3dceea308c..87746983783fe27c66e1651916d30cf264c0e27e 100644 (file)
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -96,24 +96,24 @@
 #define PCI9118_AI_FIFO_REG            0x10
 #define PCI9118_AO_REG(x)              (0x10 + ((x) * 4))
 #define PCI9118_AI_STATUS_REG          0x18
-#define PCI9118_AI_STATUS_NFULL                (1 << 8)  /* 0=FIFO full (fatal) */
-#define PCI9118_AI_STATUS_NHFULL       (1 << 7)  /* 0=FIFO half full */
-#define PCI9118_AI_STATUS_NEPTY                (1 << 6)  /* 0=FIFO empty */
-#define PCI9118_AI_STATUS_ACMP         (1 << 5)  /* 1=about trigger complete */
-#define PCI9118_AI_STATUS_DTH          (1 << 4)  /* 1=ext. digital trigger */
-#define PCI9118_AI_STATUS_BOVER                (1 << 3)  /* 1=burst overrun (fatal) */
-#define PCI9118_AI_STATUS_ADOS         (1 << 2)  /* 1=A/D over speed (warn) */
-#define PCI9118_AI_STATUS_ADOR         (1 << 1)  /* 1=A/D overrun (fatal) */
-#define PCI9118_AI_STATUS_ADRDY                (1 << 0)  /* 1=A/D ready */
+#define PCI9118_AI_STATUS_NFULL                BIT(8)  /* 0=FIFO full (fatal) */
+#define PCI9118_AI_STATUS_NHFULL       BIT(7)  /* 0=FIFO half full */
+#define PCI9118_AI_STATUS_NEPTY                BIT(6)  /* 0=FIFO empty */
+#define PCI9118_AI_STATUS_ACMP         BIT(5)  /* 1=about trigger complete */
+#define PCI9118_AI_STATUS_DTH          BIT(4)  /* 1=ext. digital trigger */
+#define PCI9118_AI_STATUS_BOVER                BIT(3)  /* 1=burst overrun (fatal) */
+#define PCI9118_AI_STATUS_ADOS         BIT(2)  /* 1=A/D over speed (warn) */
+#define PCI9118_AI_STATUS_ADOR         BIT(1)  /* 1=A/D overrun (fatal) */
+#define PCI9118_AI_STATUS_ADRDY                BIT(0)  /* 1=A/D ready */
 #define PCI9118_AI_CTRL_REG            0x18
-#define PCI9118_AI_CTRL_UNIP           (1 << 7)  /* 1=unipolar */
-#define PCI9118_AI_CTRL_DIFF           (1 << 6)  /* 1=differential inputs */
-#define PCI9118_AI_CTRL_SOFTG          (1 << 5)  /* 1=8254 software gate */
-#define PCI9118_AI_CTRL_EXTG           (1 << 4)  /* 1=8254 TGIN(pin 46) gate */
-#define PCI9118_AI_CTRL_EXTM           (1 << 3)  /* 1=ext. trigger (pin 44) */
-#define PCI9118_AI_CTRL_TMRTR          (1 << 2)  /* 1=8254 is trigger source */
-#define PCI9118_AI_CTRL_INT            (1 << 1)  /* 1=enable interrupt */
-#define PCI9118_AI_CTRL_DMA            (1 << 0)  /* 1=enable DMA */
+#define PCI9118_AI_CTRL_UNIP           BIT(7)  /* 1=unipolar */
+#define PCI9118_AI_CTRL_DIFF           BIT(6)  /* 1=differential inputs */
+#define PCI9118_AI_CTRL_SOFTG          BIT(5)  /* 1=8254 software gate */
+#define PCI9118_AI_CTRL_EXTG           BIT(4)  /* 1=8254 TGIN(pin 46) gate */
+#define PCI9118_AI_CTRL_EXTM           BIT(3)  /* 1=ext. trigger (pin 44) */
+#define PCI9118_AI_CTRL_TMRTR          BIT(2)  /* 1=8254 is trigger source */
+#define PCI9118_AI_CTRL_INT            BIT(1)  /* 1=enable interrupt */
+#define PCI9118_AI_CTRL_DMA            BIT(0)  /* 1=enable DMA */
 #define PCI9118_DIO_REG                        0x1c
 #define PCI9118_SOFTTRG_REG            0x20
 #define PCI9118_AI_CHANLIST_REG                0x24
@@ -122,20 +122,20 @@
 #define PCI9118_AI_BURST_NUM_REG       0x28
 #define PCI9118_AI_AUTOSCAN_MODE_REG   0x2c
 #define PCI9118_AI_CFG_REG             0x30
-#define PCI9118_AI_CFG_PDTRG           (1 << 7)  /* 1=positive trigger */
-#define PCI9118_AI_CFG_PETRG           (1 << 6)  /* 1=positive ext. trigger */
-#define PCI9118_AI_CFG_BSSH            (1 << 5)  /* 1=with sample & hold */
-#define PCI9118_AI_CFG_BM              (1 << 4)  /* 1=burst mode */
-#define PCI9118_AI_CFG_BS              (1 << 3)  /* 1=burst mode start */
-#define PCI9118_AI_CFG_PM              (1 << 2)  /* 1=post trigger */
-#define PCI9118_AI_CFG_AM              (1 << 1)  /* 1=about trigger */
-#define PCI9118_AI_CFG_START           (1 << 0)  /* 1=trigger start */
+#define PCI9118_AI_CFG_PDTRG           BIT(7)  /* 1=positive trigger */
+#define PCI9118_AI_CFG_PETRG           BIT(6)  /* 1=positive ext. trigger */
+#define PCI9118_AI_CFG_BSSH            BIT(5)  /* 1=with sample & hold */
+#define PCI9118_AI_CFG_BM              BIT(4)  /* 1=burst mode */
+#define PCI9118_AI_CFG_BS              BIT(3)  /* 1=burst mode start */
+#define PCI9118_AI_CFG_PM              BIT(2)  /* 1=post trigger */
+#define PCI9118_AI_CFG_AM              BIT(1)  /* 1=about trigger */
+#define PCI9118_AI_CFG_START           BIT(0)  /* 1=trigger start */
 #define PCI9118_FIFO_RESET_REG         0x34
 #define PCI9118_INT_CTRL_REG           0x38
-#define PCI9118_INT_CTRL_TIMER         (1 << 3)  /* timer interrupt */
-#define PCI9118_INT_CTRL_ABOUT         (1 << 2)  /* about trigger complete */
-#define PCI9118_INT_CTRL_HFULL         (1 << 1)  /* A/D FIFO half full */
-#define PCI9118_INT_CTRL_DTRG          (1 << 0)  /* ext. digital trigger */
+#define PCI9118_INT_CTRL_TIMER         BIT(3)  /* timer interrupt */
+#define PCI9118_INT_CTRL_ABOUT         BIT(2)  /* about trigger complete */
+#define PCI9118_INT_CTRL_HFULL         BIT(1)  /* A/D FIFO half full */
+#define PCI9118_INT_CTRL_DTRG          BIT(0)  /* ext. digital trigger */
 
 #define START_AI_EXT   0x01    /* start measure on external trigger */
 #define STOP_AI_EXT    0x02    /* stop measure on external trigger */