#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END S3C64XX_GPIO_END
+
/* define the number of gpios we need to the one after the GPQ() range */
#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
+obj-y += gpio.o
# devices
--- /dev/null
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ * gpio n: 2 bits starting at (2*n)
+ * 00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+
+ __raw_writel(con, base + 0x00);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= 1 << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ if (!gc->direction_input)
+ gc->direction_input = s3c_gpiolib_input;
+ if (!gc->direction_output)
+ gc->direction_output = s3c_gpiolib_output;
+ if (!gc->set)
+ gc->set = s3c_gpiolib_set;
+ if (!gc->get)
+ gc->get = s3c_gpiolib_get;
+
+ /* gpiochip_add() prints own failure message on error. */
+ gpiochip_add(gc);
+}
--- /dev/null
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ */
+struct s3c_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *base;
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
#include <linux/io.h>
#include <linux/gpio.h>
+#include <plat/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
-struct s3c24xx_gpio_chip {
- struct gpio_chip chip;
- void __iomem *base;
-};
-
-static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
-{
- return container_of(gpc, struct s3c24xx_gpio_chip, chip);
-}
-
-/* these routines are exported for use by other parts of the platform
- * and system support, but are not intended to be used directly by the
- * drivers themsevles.
- */
-
-static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
- __raw_writel(con, base + 0x00);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
-
- local_irq_save(flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
-}
-
-static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- unsigned long val;
-
- val = __raw_readl(ourchip->base + 0x04);
- val >>= offset;
- val &= 1;
-
- return val;
-}
-
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
return -EINVAL;
static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
return 0;
}
-static struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c_gpio_chip gpios[] = {
[0] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
.chip = {
},
};
-static __init void s3c24xx_gpiolib_add(struct s3c24xx_gpio_chip *chip)
-{
- struct gpio_chip *gc = &chip->chip;
-
- BUG_ON(!chip->base);
- BUG_ON(!gc->label);
- BUG_ON(!gc->ngpio);
-
- if (!gc->direction_input)
- gc->direction_input = s3c24xx_gpiolib_input;
- if (!gc->direction_output)
- gc->direction_output = s3c24xx_gpiolib_output;
- if (!gc->set)
- gc->set = s3c24xx_gpiolib_set;
- if (!gc->get)
- gc->get = s3c24xx_gpiolib_get;
-
- /* gpiochip_add() prints own failure message on error. */
- gpiochip_add(gc);
-}
-
static __init int s3c24xx_gpiolib_init(void)
{
- struct s3c24xx_gpio_chip *chip = gpios;
+ struct s3c_gpio_chip *chip = gpios;
int gpn;
for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
- s3c24xx_gpiolib_add(chip);
+ s3c_gpiolib_add(chip);
return 0;
}
projects / openwrt / staging / blogic.git / commitdiff