CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_ASP834x is not set
CONFIG_ATA=y
+# CONFIG_ATA_PIIX is not set
CONFIG_AUDIT_ARCH=y
-# CONFIG_BINARY_PRINTF is not set
CONFIG_BITREVERSE=y
# CONFIG_BOOTX_TEXT is not set
CONFIG_BOUNCE=y
# CONFIG_BRIQ_PANEL is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CMDLINE_BOOL=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_DEVPORT=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_SOC=y
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_IOMAP is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_NVRAM=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_LMB=y
-CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_COUNTERS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HVC_RTAS is not set
-# CONFIG_HVC_UDBG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HZ_100 is not set
CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_HELPER is not set
CONFIG_IPIC=y
-CONFIG_IRQ_PER_CPU=y
# CONFIG_IRQSTACKS is not set
-CONFIG_ISA_DMA_API=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
# CONFIG_JFFS2_FS is not set
CONFIG_KERNEL_START=0xc0000000
+# CONFIG_KMETER1 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC836x_RDK is not set
# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
+CONFIG_MPC837x_RDB=y
# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_MPIC_WEIRD is not set
CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
# CONFIG_MTD_CFI is not set
+CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_NAND_FSL_UPM is not set
CONFIG_MTD_NAND_RB_PPC=y
-CONFIG_MTD_NAND=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MV643XX_ETH is not set
+CONFIG_OF=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
-CONFIG_OF=y
+CONFIG_OF_MDIO=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_PATA_RB_PPC=m
+CONFIG_PCIEAER=y
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIE_ECRC is not set
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC=y
CONFIG_PPC32=y
-CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC64 is not set
-# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_DCR_NATIVE is not set
+CONFIG_PPC_DISABLE_WERROR=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_PPC_FPU=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_IO is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PPC_MPC106=y
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
CONFIG_PPC_NATIVE=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_OF=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_RTAS=y
-CONFIG_PPC_STD_MMU_32=y
CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC=y
+CONFIG_PPC_WERROR=y
# CONFIG_PQ2ADS is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_PROC_DEVICETREE=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_QE is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SLOW_WORK is not set
# CONFIG_SQUASHFS is not set
+# CONFIG_SWIOTLB is not set
CONFIG_TASK_SIZE=0xc0000000
# CONFIG_TAU is not set
-CONFIG_TRACING_SUPPORT=y
# CONFIG_UCC_GETH is not set
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_WATCHDOG_RTAS is not set
;;
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
-@@ -97,9 +97,11 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += f
+@@ -104,9 +104,11 @@ obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
+endif
obj-$(CONFIG_PPC64) += $(obj64-y)
-
+ obj-$(CONFIG_PPC32) += $(obj32-y)
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -30,6 +30,15 @@ config MPC832x_RDB
menu "CPU Frequency drivers"
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
-@@ -50,3 +50,5 @@ obj-$(CONFIG_UCODE_PATCH) += micropatch.
+@@ -56,3 +56,5 @@ obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clo
ifeq ($(CONFIG_SUSPEND),y)
obj-$(CONFIG_6xx) += 6xx-suspend.o
endif
+EXPORT_SYMBOL(localbus_unmap);
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
-@@ -734,5 +734,12 @@ config PATA_BF54X
+@@ -751,5 +751,12 @@ config PATA_BF54X
If unsure, say N.
endif # ATA
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
-@@ -73,6 +73,7 @@ obj-$(CONFIG_PATA_OCTEON_CF) += pata_oct
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+@@ -75,6 +75,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat
+ obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
+module_exit(rbppc_exit);
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -380,6 +380,13 @@ config MTD_NAND_PLATFORM
+@@ -386,6 +386,13 @@ config MTD_NAND_PLATFORM
devices. You will need to provide platform-specific functions
via platform_data.
depends on MTD_NAND && USB
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
--- /dev/null
+From fda4bd9bac78efd2f9d566c52956d297bc03e8d9 Mon Sep 17 00:00:00 2001
+From: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Sat, 25 Jul 2009 01:42:17 +0400
+Subject: [PATCH] powerpc/83xx: Add support for MPC8377E-WLAN boards
+
+MPC8377E-WLAN are basically RDB boards except:
+
+- RAM extended to 512 MB;
+- NAND flash removed, NOR flash extended to 64 MB;
+- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
+- Power management MCU removed;
+- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
+- USB3300 PHY's ID pin grounded, thus USB port is host-only.
+
+Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+---
+ arch/powerpc/boot/dts/mpc8377_wlan.dts | 464 +++++++++++++++++++++++++++++
+ arch/powerpc/platforms/83xx/Kconfig | 4 +-
+ arch/powerpc/platforms/83xx/mpc837x_rdb.c | 5 +-
+ 3 files changed, 469 insertions(+), 4 deletions(-)
+ create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts
+
+--- /dev/null
++++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
+@@ -0,0 +1,464 @@
++/*
++ * MPC8377E WLAN Device Tree Source
++ *
++ * Copyright 2007-2009 Freescale Semiconductor Inc.
++ * Copyright 2009 MontaVista Software, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++/dts-v1/;
++
++/ {
++ compatible = "fsl,mpc8377wlan";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ aliases {
++ ethernet0 = &enet0;
++ ethernet1 = &enet1;
++ serial0 = &serial0;
++ serial1 = &serial1;
++ pci0 = &pci0;
++ pci1 = &pci1;
++ pci2 = &pci2;
++ };
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ PowerPC,8377@0 {
++ device_type = "cpu";
++ reg = <0x0>;
++ d-cache-line-size = <32>;
++ i-cache-line-size = <32>;
++ d-cache-size = <32768>;
++ i-cache-size = <32768>;
++ timebase-frequency = <0>;
++ bus-frequency = <0>;
++ clock-frequency = <0>;
++ };
++ };
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>; // 512MB at 0
++ };
++
++ localbus@e0005000 {
++ #address-cells = <2>;
++ #size-cells = <1>;
++ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
++ reg = <0xe0005000 0x1000>;
++ interrupts = <77 0x8>;
++ interrupt-parent = <&ipic>;
++ ranges = <0x0 0x0 0xfc000000 0x04000000>;
++
++ flash@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x4000000>;
++ bank-width = <2>;
++ device-width = <1>;
++
++ partition@0 {
++ reg = <0 0x8000>;
++ label = "u-boot";
++ read-only;
++ };
++
++ partition@a0000 {
++ reg = <0xa0000 0x300000>;
++ label = "kernel";
++ };
++
++ partition@3a0000 {
++ reg = <0x3a0000 0x3c60000>;
++ label = "rootfs";
++ };
++ };
++ };
++
++ immr@e0000000 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ device_type = "soc";
++ compatible = "simple-bus";
++ ranges = <0x0 0xe0000000 0x00100000>;
++ reg = <0xe0000000 0x00000200>;
++ bus-frequency = <0>;
++
++ wdt@200 {
++ device_type = "watchdog";
++ compatible = "mpc83xx_wdt";
++ reg = <0x200 0x100>;
++ };
++
++ gpio1: gpio-controller@c00 {
++ #gpio-cells = <2>;
++ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
++ reg = <0xc00 0x100>;
++ interrupts = <74 0x8>;
++ interrupt-parent = <&ipic>;
++ gpio-controller;
++ };
++
++ gpio2: gpio-controller@d00 {
++ #gpio-cells = <2>;
++ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
++ reg = <0xd00 0x100>;
++ interrupts = <75 0x8>;
++ interrupt-parent = <&ipic>;
++ gpio-controller;
++ };
++
++ sleep-nexus {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "simple-bus";
++ sleep = <&pmc 0x0c000000>;
++ ranges;
++
++ i2c@3000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ cell-index = <0>;
++ compatible = "fsl-i2c";
++ reg = <0x3000 0x100>;
++ interrupts = <14 0x8>;
++ interrupt-parent = <&ipic>;
++ dfsrr;
++
++ at24@50 {
++ compatible = "at24,24c256";
++ reg = <0x50>;
++ };
++
++ rtc@68 {
++ compatible = "dallas,ds1339";
++ reg = <0x68>;
++ };
++ };
++
++ sdhci@2e000 {
++ compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
++ reg = <0x2e000 0x1000>;
++ interrupts = <42 0x8>;
++ interrupt-parent = <&ipic>;
++ clock-frequency = <133333333>;
++ };
++ };
++
++ i2c@3100 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ cell-index = <1>;
++ compatible = "fsl-i2c";
++ reg = <0x3100 0x100>;
++ interrupts = <15 0x8>;
++ interrupt-parent = <&ipic>;
++ dfsrr;
++ };
++
++ spi@7000 {
++ cell-index = <0>;
++ compatible = "fsl,spi";
++ reg = <0x7000 0x1000>;
++ interrupts = <16 0x8>;
++ interrupt-parent = <&ipic>;
++ mode = "cpu";
++ };
++
++ dma@82a8 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
++ reg = <0x82a8 4>;
++ ranges = <0 0x8100 0x1a8>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ cell-index = <0>;
++ dma-channel@0 {
++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
++ reg = <0 0x80>;
++ cell-index = <0>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@80 {
++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x80 0x80>;
++ cell-index = <1>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@100 {
++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x100 0x80>;
++ cell-index = <2>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@180 {
++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x180 0x28>;
++ cell-index = <3>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ };
++
++ usb@23000 {
++ compatible = "fsl-usb2-dr";
++ reg = <0x23000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ interrupt-parent = <&ipic>;
++ interrupts = <38 0x8>;
++ phy_type = "ulpi";
++ sleep = <&pmc 0x00c00000>;
++ };
++
++ enet0: ethernet@24000 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ cell-index = <0>;
++ device_type = "network";
++ model = "eTSEC";
++ compatible = "gianfar";
++ reg = <0x24000 0x1000>;
++ ranges = <0x0 0x24000 0x1000>;
++ local-mac-address = [ 00 00 00 00 00 00 ];
++ interrupts = <32 0x8 33 0x8 34 0x8>;
++ phy-connection-type = "mii";
++ interrupt-parent = <&ipic>;
++ tbi-handle = <&tbi0>;
++ phy-handle = <&phy2>;
++ sleep = <&pmc 0xc0000000>;
++ fsl,magic-packet;
++
++ mdio@520 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,gianfar-mdio";
++ reg = <0x520 0x20>;
++
++ phy2: ethernet-phy@2 {
++ interrupt-parent = <&ipic>;
++ interrupts = <17 0x8>;
++ reg = <0x2>;
++ device_type = "ethernet-phy";
++ };
++
++ phy3: ethernet-phy@3 {
++ interrupt-parent = <&ipic>;
++ interrupts = <18 0x8>;
++ reg = <0x3>;
++ device_type = "ethernet-phy";
++ };
++
++ tbi0: tbi-phy@11 {
++ reg = <0x11>;
++ device_type = "tbi-phy";
++ };
++ };
++ };
++
++ enet1: ethernet@25000 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ cell-index = <1>;
++ device_type = "network";
++ model = "eTSEC";
++ compatible = "gianfar";
++ reg = <0x25000 0x1000>;
++ ranges = <0x0 0x25000 0x1000>;
++ local-mac-address = [ 00 00 00 00 00 00 ];
++ interrupts = <35 0x8 36 0x8 37 0x8>;
++ phy-connection-type = "mii";
++ interrupt-parent = <&ipic>;
++ phy-handle = <&phy3>;
++ tbi-handle = <&tbi1>;
++ sleep = <&pmc 0x30000000>;
++ fsl,magic-packet;
++
++ mdio@520 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,gianfar-tbi";
++ reg = <0x520 0x20>;
++
++ tbi1: tbi-phy@11 {
++ reg = <0x11>;
++ device_type = "tbi-phy";
++ };
++ };
++ };
++
++ serial0: serial@4500 {
++ cell-index = <0>;
++ device_type = "serial";
++ compatible = "ns16550";
++ reg = <0x4500 0x100>;
++ clock-frequency = <0>;
++ interrupts = <9 0x8>;
++ interrupt-parent = <&ipic>;
++ };
++
++ serial1: serial@4600 {
++ cell-index = <1>;
++ device_type = "serial";
++ compatible = "ns16550";
++ reg = <0x4600 0x100>;
++ clock-frequency = <0>;
++ interrupts = <10 0x8>;
++ interrupt-parent = <&ipic>;
++ };
++
++ crypto@30000 {
++ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
++ "fsl,sec2.1", "fsl,sec2.0";
++ reg = <0x30000 0x10000>;
++ interrupts = <11 0x8>;
++ interrupt-parent = <&ipic>;
++ fsl,num-channels = <4>;
++ fsl,channel-fifo-len = <24>;
++ fsl,exec-units-mask = <0x9fe>;
++ fsl,descriptor-types-mask = <0x3ab0ebf>;
++ sleep = <&pmc 0x03000000>;
++ };
++
++ sata@18000 {
++ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
++ reg = <0x18000 0x1000>;
++ interrupts = <44 0x8>;
++ interrupt-parent = <&ipic>;
++ sleep = <&pmc 0x000000c0>;
++ };
++
++ sata@19000 {
++ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
++ reg = <0x19000 0x1000>;
++ interrupts = <45 0x8>;
++ interrupt-parent = <&ipic>;
++ sleep = <&pmc 0x00000030>;
++ };
++
++ /* IPIC
++ * interrupts cell = <intr #, sense>
++ * sense values match linux IORESOURCE_IRQ_* defines:
++ * sense == 8: Level, low assertion
++ * sense == 2: Edge, high-to-low change
++ */
++ ipic: interrupt-controller@700 {
++ compatible = "fsl,ipic";
++ interrupt-controller;
++ #address-cells = <0>;
++ #interrupt-cells = <2>;
++ reg = <0x700 0x100>;
++ };
++
++ pmc: power@b00 {
++ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
++ reg = <0xb00 0x100 0xa00 0x100>;
++ interrupts = <80 0x8>;
++ interrupt-parent = <&ipic>;
++ };
++ };
++
++ pci0: pci@e0008500 {
++ interrupt-map-mask = <0xf800 0 0 7>;
++ interrupt-map = <
++ /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
++
++ /* IDSEL AD14 IRQ6 inta */
++ 0x7000 0x0 0x0 0x1 &ipic 22 0x8
++
++ /* IDSEL AD15 IRQ5 inta */
++ 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
++ interrupt-parent = <&ipic>;
++ interrupts = <66 0x8>;
++ bus-range = <0 0>;
++ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
++ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
++ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
++ sleep = <&pmc 0x00010000>;
++ clock-frequency = <66666666>;
++ #interrupt-cells = <1>;
++ #size-cells = <2>;
++ #address-cells = <3>;
++ reg = <0xe0008500 0x100 /* internal registers */
++ 0xe0008300 0x8>; /* config space access registers */
++ compatible = "fsl,mpc8349-pci";
++ device_type = "pci";
++ };
++
++ pci1: pcie@e0009000 {
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ device_type = "pci";
++ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
++ reg = <0xe0009000 0x00001000>;
++ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
++ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
++ bus-range = <0 255>;
++ interrupt-map-mask = <0xf800 0 0 7>;
++ interrupt-map = <0 0 0 1 &ipic 1 8
++ 0 0 0 2 &ipic 1 8
++ 0 0 0 3 &ipic 1 8
++ 0 0 0 4 &ipic 1 8>;
++ sleep = <&pmc 0x00300000>;
++ clock-frequency = <0>;
++
++ pcie@0 {
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ reg = <0 0 0 0 0>;
++ ranges = <0x02000000 0 0xa8000000
++ 0x02000000 0 0xa8000000
++ 0 0x10000000
++ 0x01000000 0 0x00000000
++ 0x01000000 0 0x00000000
++ 0 0x00800000>;
++ };
++ };
++
++ pci2: pcie@e000a000 {
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ device_type = "pci";
++ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
++ reg = <0xe000a000 0x00001000>;
++ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
++ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
++ bus-range = <0 255>;
++ interrupt-map-mask = <0xf800 0 0 7>;
++ interrupt-map = <0 0 0 1 &ipic 2 8
++ 0 0 0 2 &ipic 2 8
++ 0 0 0 3 &ipic 2 8
++ 0 0 0 4 &ipic 2 8>;
++ sleep = <&pmc 0x000c0000>;
++ clock-frequency = <0>;
++
++ pcie@0 {
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ reg = <0 0 0 0 0>;
++ ranges = <0x02000000 0 0xc8000000
++ 0x02000000 0 0xc8000000
++ 0 0x10000000
++ 0x01000000 0 0x00000000
++ 0x01000000 0 0x00000000
++ 0 0x00800000>;
++ };
++ };
++};
+--- a/arch/powerpc/platforms/83xx/Kconfig
++++ b/arch/powerpc/platforms/83xx/Kconfig
+@@ -84,11 +84,11 @@ config MPC837x_MDS
+ This option enables support for the MPC837x MDS Processor Board.
+
+ config MPC837x_RDB
+- bool "Freescale MPC837x RDB"
++ bool "Freescale MPC837x RDB/WLAN"
+ select DEFAULT_UIMAGE
+ select PPC_MPC837x
+ help
+- This option enables support for the MPC837x RDB Board.
++ This option enables support for the MPC837x RDB and WLAN Boards.
+
+ config SBC834x
+ bool "Wind River SBC834x"
+--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
++++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
+ of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
+- of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
++ of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
++ of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
+ }
+
+ define_machine(mpc837x_rdb) {
+- .name = "MPC837x RDB",
++ .name = "MPC837x RDB/WLAN",
+ .probe = mpc837x_rdb_probe,
+ .setup_arch = mpc837x_rdb_setup_arch,
+ .init_IRQ = mpc837x_rdb_init_IRQ,
--- /dev/null
+From 50dfe70fe9e216cf356830194630f9a39e498d76 Mon Sep 17 00:00:00 2001
+From: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue, 22 Sep 2009 16:45:14 -0700
+Subject: [PATCH] powerpc: introduce and document sdhci,wp-inverted property for eSDHC
+
+eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
+sdhci-of driver will look for sdhci,wp-inverted properties to decide
+whether apply a specific quirk.
+
+So, document the property and add it to device tree source files.
+
+Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+Cc: Pierre Ossman <pierre@ossman.eu>
+Cc: Kumar Gala <galak@kernel.crashing.org>
+Cc: David Vrabel <david.vrabel@csr.com>
+Cc: Ben Dooks <ben@fluff.org>
+Cc: Sascha Hauer <s.hauer@pengutronix.de>
+Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+Cc: <linux-mmc@vger.kernel.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+ Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++
+ arch/powerpc/boot/dts/mpc8377_mds.dts | 1 +
+ arch/powerpc/boot/dts/mpc8377_rdb.dts | 1 +
+ arch/powerpc/boot/dts/mpc8377_wlan.dts | 1 +
+ arch/powerpc/boot/dts/mpc8378_mds.dts | 1 +
+ arch/powerpc/boot/dts/mpc8378_rdb.dts | 1 +
+ arch/powerpc/boot/dts/mpc8379_mds.dts | 1 +
+ arch/powerpc/boot/dts/mpc8379_rdb.dts | 1 +
+ 8 files changed, 9 insertions(+), 0 deletions(-)
+
+--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
++++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+@@ -10,6 +10,8 @@ Required properties:
+ - interrupts : should contain eSDHC interrupt.
+ - interrupt-parent : interrupt source phandle.
+ - clock-frequency : specifies eSDHC base clock frequency.
++ - sdhci,wp-inverted : (optional) specifies that eSDHC controller
++ reports inverted write-protect state;
+ - sdhci,1-bit-only : (optional) specifies that a controller can
+ only handle 1-bit data transfers.
+
+--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
++++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
+@@ -159,6 +159,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
++++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
+@@ -173,6 +173,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
++++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
+@@ -150,6 +150,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ clock-frequency = <133333333>;
+ };
+ };
+--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
++++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
+@@ -159,6 +159,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
++++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
+@@ -173,6 +173,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
++++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
+@@ -157,6 +157,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
++++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
+@@ -171,6 +171,7 @@
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
++ sdhci,wp-inverted;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
projects / openwrt / staging / ansuel.git / commitdiff