media: smiapp: Move definitions under driver directory

include/media/i2c/smiapp.h was meant to serve systems where the sensor is
enumerated through platform data. That's no longer necessary, hopefully
not even in out-of-tree use cases. Move the definitions to the appropriate
headers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

diff --git a/drivers/media/i2c/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h
index 43505cd0616e8eeeeb394e81a8ae56fe8dae27fd..e6f96309786fa3c6811d843d12788949e5d37d7b 100644 (file)
--- a/drivers/media/i2c/smiapp/smiapp-reg.h
+++ b/drivers/media/i2c/smiapp/smiapp-reg.h
@@ -35,6 +35,10 @@
 #define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE     BIT(0)
 #define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE   BIT(1)
 
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK     0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE    1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2                        2
+
 #define SMIAPP_DPHY_CTRL_AUTOMATIC                     0
 /* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
 #define SMIAPP_DPHY_CTRL_UI                            1

diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h
index 4837d80dc453e8c11c739c80f56cdfaacc9a64ca..6f469934f9e360de70bb7ed22f53503fa81c0a1c 100644 (file)
--- a/drivers/media/i2c/smiapp/smiapp.h
+++ b/drivers/media/i2c/smiapp/smiapp.h
@@ -14,7 +14,6 @@
 #include <linux/mutex.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-subdev.h>
-#include <media/i2c/smiapp.h>
 
 #include "smiapp-pll.h"
 #include "smiapp-reg.h"
@@ -42,6 +41,49 @@
 
 #define SMIAPP_COLOUR_COMPONENTS       4
 
+#define SMIAPP_NAME            "smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR    (0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR    (0x6e >> 1) /* Alternate I2C Address */
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+       SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+       SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+       u8 mode;
+       u32 strobe_width_high_us;
+       u16 strobe_delay;
+       u16 stobe_start_point;
+       u8 trigger;
+};
+
+struct smiapp_hwconfig {
+       /*
+        * Change the cci address if i2c_addr_alt is set.
+        * Both default and alternate cci addr need to be present
+        */
+       unsigned short i2c_addr_dfl;    /* Default i2c addr */
+       unsigned short i2c_addr_alt;    /* Alternate i2c addr */
+
+       uint32_t ext_clk;               /* sensor external clk */
+
+       unsigned int lanes;             /* Number of CSI-2 lanes */
+       uint32_t csi_signalling_mode;   /* SMIAPP_CSI_SIGNALLING_MODE_* */
+       uint64_t *op_sys_clock;
+
+       enum smiapp_module_board_orient module_board_orient;
+
+       struct smiapp_flash_strobe_parms *strobe_setup;
+};
+
 #include "smiapp-limits.h"
 
 struct smiapp_quirk;

diff --git a/include/media/i2c/smiapp.h b/include/media/i2c/smiapp.h
deleted file mode 100644 (file)
index 80f8251..0000000
--- a/include/media/i2c/smiapp.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * include/media/i2c/smiapp.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@iki.fi>
- */
-
-#ifndef __SMIAPP_H_
-#define __SMIAPP_H_
-
-#include <media/v4l2-subdev.h>
-
-#define SMIAPP_NAME            "smiapp"
-
-#define SMIAPP_DFL_I2C_ADDR    (0x20 >> 1) /* Default I2C Address */
-#define SMIAPP_ALT_I2C_ADDR    (0x6e >> 1) /* Alternate I2C Address */
-
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK     0
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE    1
-#define SMIAPP_CSI_SIGNALLING_MODE_CSI2                        2
-
-/*
- * Sometimes due to board layout considerations the camera module can be
- * mounted rotated. The typical rotation used is 180 degrees which can be
- * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
- * FIXME: rotation also changes the bayer pattern.
- */
-enum smiapp_module_board_orient {
-       SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
-       SMIAPP_MODULE_BOARD_ORIENT_180,
-};
-
-struct smiapp_flash_strobe_parms {
-       u8 mode;
-       u32 strobe_width_high_us;
-       u16 strobe_delay;
-       u16 stobe_start_point;
-       u8 trigger;
-};
-
-struct smiapp_hwconfig {
-       /*
-        * Change the cci address if i2c_addr_alt is set.
-        * Both default and alternate cci addr need to be present
-        */
-       unsigned short i2c_addr_dfl;    /* Default i2c addr */
-       unsigned short i2c_addr_alt;    /* Alternate i2c addr */
-
-       uint32_t ext_clk;               /* sensor external clk */
-
-       unsigned int lanes;             /* Number of CSI-2 lanes */
-       uint32_t csi_signalling_mode;   /* SMIAPP_CSI_SIGNALLING_MODE_* */
-       uint64_t *op_sys_clock;
-
-       enum smiapp_module_board_orient module_board_orient;
-
-       struct smiapp_flash_strobe_parms *strobe_setup;
-};
-
-#endif /* __SMIAPP_H_  */