default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
help
Some MIPS machines can be configured for either little or big endian
-diff -Nur linux-2.6.12.5/arch/mips/Kconfig.orig linux-2.6.12.5-brcm/arch/mips/Kconfig.orig
---- linux-2.6.12.5/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/Kconfig.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1662 @@
-+config MIPS
-+ bool
-+ default y
-+ # Horrible source of confusion. Die, die, die ...
-+ select EMBEDDED
-+
-+config MIPS64
-+ bool "64-bit kernel"
-+ help
-+ Select this option if you want to build a 64-bit kernel. You should
-+ only select this option if you have hardware that actually has a
-+ 64-bit processor and if your application will actually benefit from
-+ 64-bit processing, otherwise say N. You must say Y for kernels for
-+ SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
-+
-+config 64BIT
-+ def_bool MIPS64
-+
-+config MIPS32
-+ bool
-+ depends on MIPS64 = 'n'
-+ default y
-+
-+mainmenu "Linux/MIPS Kernel Configuration"
-+
-+source "init/Kconfig"
-+
-+menu "Machine selection"
-+
-+config MACH_JAZZ
-+ bool "Support for the Jazz family of machines"
-+ select ARC
-+ select ARC32
-+ select GENERIC_ISA_DMA
-+ select I8259
-+ select ISA
-+ help
-+ This a family of machines based on the MIPS R4030 chipset which was
-+ used by several vendors to build RISC/os and Windows NT workstations.
-+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-+ Olivetti M700-10 workstations.
-+
-+config ACER_PICA_61
-+ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-+ depends on MACH_JAZZ && EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config MIPS_MAGNUM_4000
-+ bool "Support for MIPS Magnum 4000"
-+ depends on MACH_JAZZ
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config OLIVETTI_M700
-+ bool "Support for Olivetti M700-10"
-+ depends on MACH_JAZZ
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config MACH_VR41XX
-+ bool "Support for NEC VR41XX-based machines"
-+
-+config NEC_CMBVR4133
-+ bool "Support for NEC CMB-VR4133"
-+ depends on MACH_VR41XX
-+ select CPU_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select HW_HAS_PCI
-+ select PCI_VR41XX
+diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
+--- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-08-28 16:39:59.077334424 +0200
+@@ -79,7 +79,7 @@
+ cflags-y += -I $(TOPDIR)/include/asm/gcc
+ cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y += $(call cc-option, -finline-limit=100000)
+-LDFLAGS_vmlinux += -G 0 -static -n
++LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
+ MODFLAGS += -mlong-calls
+
+ cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
+@@ -167,9 +167,10 @@
+ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
+ -Wa,--trap
+
+-cflags-$(CONFIG_CPU_MIPS32) += \
+- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
+- -Wa,--trap
++#cflags-$(CONFIG_CPU_MIPS32) += \
++# $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
++# -Wa,--trap
++cflags-$(CONFIG_CPU_MIPS32) += -mips2 -Wa,--trap
+
+ cflags-$(CONFIG_CPU_MIPS64) += \
+ $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
+@@ -618,6 +619,14 @@
+ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
+
+ #
++# Broadcom BCM47XX boards
++#
++core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
++cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include
++load-$(CONFIG_BCM947XX) := 0xffffffff80001000
+
-+config ROCKHOPPER
-+ bool "Support for Rockhopper baseboard"
-+ depends on NEC_CMBVR4133
-+ select I8259
-+ select HAVE_STD_PC_SERIAL_PORT
+
-+config CASIO_E55
-+ bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select ISA
++#
+ # SNI RM200 PCI
+ #
+ core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
+@@ -729,6 +738,7 @@
+ archclean:
+ @$(MAKE) $(clean)=arch/mips/boot
+ @$(MAKE) $(clean)=arch/mips/lasat
++ @$(MAKE) -C arch/mips/bcm47xx/compressed clean
+
+ # Generate <asm/offset.h
+ #
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile 2005-08-28 11:12:20.406862800 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
+
-+config IBM_WORKPAD
-+ bool "Support for IBM WorkPad z50"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select ISA
++obj-y := irq.o int-handler.o prom.o setup.o time.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
+
-+config TANBAC_TB0226
-+ bool "Support for TANBAC TB0226 (Mbase)"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ help
-+ The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
-+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200
+@@ -0,0 +1,685 @@
++/*
++ * Misc useful routines to access NIC SROM
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+config TANBAC_TB0229
-+ bool "Support for TANBAC TB0229 (VR4131DIMM)"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ help
-+ The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
-+ Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmsrom.h>
++#include <bcmdevs.h>
++#include <bcmendian.h>
++#include <sbpcmcia.h>
++#include <pcicfg.h>
+
-+config VICTOR_MPC30X
-+ bool "Support for Victor MP-C303/304"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ depends on MACH_VR41XX
++#include <proto/ethernet.h> /* for sprom content groking */
+
-+config ZAO_CAPCELLA
-+ bool "Support for ZAO Networks Capcella"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
++#define VARS_MAX 4096 /* should be reduced */
+
-+config PCI_VR41XX
-+ bool "Add PCI control unit support of NEC VR4100 series"
-+ depends on MACH_VR41XX && PCI
-+
-+config VRC4171
-+ tristate "Add NEC VRC4171 companion chip support"
-+ depends on MACH_VR41XX && ISA
-+ ---help---
-+ The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
-+
-+config VRC4173
-+ tristate "Add NEC VRC4173 companion chip support"
-+ depends on MACH_VR41XX && PCI_VR41XX
-+ ---help---
-+ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
-+
-+config TOSHIBA_JMR3927
-+ bool "Support for Toshiba JMR-TX3927 board"
-+ depends on MIPS32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
++static int initvars_srom_pci(void *curmap, char **vars, int *count);
++static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
++static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
++static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
++static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
++static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
+
-+config MIPS_COBALT
-+ bool "Support for Cobalt Server (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select I8259
-+ select IRQ_CPU
++/*
++ * Initialize the vars from the right source for this platform.
++ * Return 0 on success, nonzero on error.
++ */
++int
++srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
++{
++ if (vars == NULL)
++ return (0);
+
-+config MACH_DECSTATION
-+ bool "Support for DECstations"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ depends on MIPS32 || EXPERIMENTAL
-+ ---help---
-+ This enables support for DEC's MIPS based workstations. For details
-+ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
-+ DECstation porting pages on <http://decstation.unix-ag.org/>.
++ switch (bus) {
++ case SB_BUS:
++ /* These two could be asserts ... */
++ *vars = NULL;
++ *count = 0;
++ return(0);
+
-+ If you have one of the following DECstation Models you definitely
-+ want to choose R4xx0 for the CPU Type:
++ case PCI_BUS:
++ ASSERT(curmap); /* can not be NULL */
++ return(initvars_srom_pci(curmap, vars, count));
+
-+ DECstation 5000/50
-+ DECstation 5000/150
-+ DECstation 5000/260
-+ DECsystem 5900/260
++ case PCMCIA_BUS:
++ return(initvars_cis_pcmcia(osh, vars, count));
+
-+ otherwise choose R3000.
+
-+config MIPS_EV64120
-+ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ help
-+ This is an evaluation board based on the Galileo GT-64120
-+ single-chip system controller that contains a MIPS R5000 compatible
-+ core running at 75/100MHz. Their website is located at
-+ <http://www.marvell.com/>. Say Y here if you wish to build a
-+ kernel for this platform.
-+
-+config EVB_PCI1
-+ bool "Enable Second PCI (PCI1)"
-+ depends on MIPS_EV64120
-+
-+config MIPS_EV96100
-+ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select MIPS_GT96100
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN
-+ communications controllers containing a MIPS R5000 compatible core
-+ running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
-+ here if you wish to build a kernel for this platform.
++ default:
++ ASSERT(0);
++ }
++ return (-1);
++}
+
-+config MIPS_IVR
-+ bool "Support for Globespan IVR board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ help
-+ This is an evaluation board built by Globespan to showcase thir
-+ iVR (Internet Video Recorder) design. It utilizes a QED RM5231
-+ R5000 MIPS core. More information can be found out their website
-+ located at <http://www.globespan.net/>. Say Y here if you wish to
-+ build a kernel for this platform.
-+
-+config LASAT
-+ bool "Support for LASAT Networks platforms"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ select R5000_CPU_SCACHE
+
-+config PICVUE
-+ tristate "PICVUE LCD display driver"
-+ depends on LASAT
++/* support only 16-bit word read from srom */
++int
++srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ void *srom;
++ uint i, off, nw;
+
-+config PICVUE_PROC
-+ tristate "PICVUE LCD display driver /proc interface"
-+ depends on PICVUE
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
+
-+config DS1603
-+ bool "DS1603 RTC driver"
-+ depends on LASAT
++ if (bus == PCI_BUS) {
++ if (!curmap)
++ return 1;
++ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
++ return 1;
++ } else if (bus == PCMCIA_BUS) {
++ off = byteoff / 2;
++ nw = nbytes / 2;
++ for (i = 0; i < nw; i++) {
++ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
++ return 1;
++ }
++ } else {
++ return 1;
++ }
+
-+config LASAT_SYSCTL
-+ bool "LASAT sysctl interface"
-+ depends on LASAT
++ return 0;
++}
+
-+config MIPS_ITE8172
-+ bool "Support for ITE 8172G board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ help
-+ Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
-+ with ATX form factor that utilizes a MIPS R5000 to work with its
-+ ITE8172G companion internet appliance chip. The MIPS core can be
-+ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
-+ a kernel for this platform.
-+
-+config IT8172_REVC
-+ bool "Support for older IT8172 (Rev C)"
-+ depends on MIPS_ITE8172
-+ help
-+ Say Y here to support the older, Revision C version of the Integrated
-+ Technology Express, Inc. ITE8172 SBC. Vendor page at
-+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-+
-+config MIPS_ATLAS
-+ bool "Support for MIPS Atlas board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ select SWAP_IO_SPACE
-+ help
-+ This enables support for the QED R5231-based MIPS Atlas evaluation
-+ board.
++/* support only 16-bit word write into srom */
++int
++srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ uint16 *srom;
++ uint i, off, nw, crc_range;
++ uint16 image[SPROM_SIZE], *p;
++ uint8 crc;
++ volatile uint32 val32;
+
-+config MIPS_MALTA
-+ bool "Support for MIPS Malta board"
-+ select BOOT_ELF32
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select DMA_NONCOHERENT
-+ select GENERIC_ISA_DMA
-+ select HW_HAS_PCI
-+ select I8259
-+ select MIPS_GT64120
-+ select SWAP_IO_SPACE
-+ help
-+ This enables support for the VR5000-based MIPS Malta evaluation
-+ board.
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
+
-+config MIPS_SEAD
-+ bool "Support for MIPS SEAD board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select IRQ_CPU
-+ select DMA_NONCOHERENT
++ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
+
-+config MOMENCO_OCELOT
-+ bool "Support for Momentum Ocelot board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select MIPS_GT64120
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++ /* if changes made inside crc cover range */
++ if (byteoff < crc_range) {
++ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
++ /* read data including entire first 64 words from srom */
++ if (srom_read(bus, curmap, osh, 0, nw * 2, image))
++ return 1;
++ /* make changes */
++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
++ /* calculate crc */
++ htol16_buf(image, crc_range);
++ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
++ ltoh16_buf(image, crc_range);
++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
++ p = image;
++ off = 0;
++ } else {
++ p = buf;
++ off = byteoff / 2;
++ nw = nbytes / 2;
++ }
+
-+config MOMENCO_OCELOT_G
-+ bool "Support for Momentum Ocelot-G board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++ if (bus == PCI_BUS) {
++ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++ /* enable writes to the SPROM */
++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
++ val32 |= SPROM_WRITEEN;
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
++ bcm_mdelay(500);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ W_REG(&srom[off + i], p[i]);
++ bcm_mdelay(20);
++ }
++ /* disable writes to the SPROM */
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
++ } else if (bus == PCMCIA_BUS) {
++ /* enable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WEN))
++ return 1;
++ bcm_mdelay(500);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
++ bcm_mdelay(20);
++ }
++ /* disable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WDS))
++ return 1;
++ } else {
++ return 1;
++ }
+
-+config MOMENCO_OCELOT_C
-+ bool "Support for Momentum Ocelot-C board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_MV64340
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++ bcm_mdelay(500);
++ return 0;
++}
+
-+config MOMENCO_OCELOT_3
-+ bool "Support for Momentum Ocelot-3 board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_MV64340
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot-3 is based off Discovery III System Controller and
-+ PMC-Sierra Rm79000 core.
+
-+config MOMENCO_JAGUAR_ATX
-+ bool "Support for Momentum Jaguar board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_MV64340
-+ select LIMITED_DMA
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++int
++srom_parsecis(uint8 *cis, char **vars, int *count)
++{
++ char eabuf[32];
++ char *vp, *base;
++ uint8 tup, tlen, sromrev = 1;
++ int i, j;
++ uint varsize;
++ bool ag_init = FALSE;
++ uint16 w;
+
-+config JAGUAR_DMALOW
-+ bool "Low DMA Mode"
-+ depends on MOMENCO_JAGUAR_ATX
-+ help
-+ Select to Y if jump JP5 is set on your board, N otherwise. Normally
-+ the jumper is set, so if you feel unsafe, just say Y.
++ ASSERT(vars);
++ ASSERT(count);
+
-+config PMC_YOSEMITE
-+ bool "Support for PMC-Sierra Yosemite eval board"
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_CPU_RM9K
-+ select SWAP_IO_SPACE
-+ help
-+ Yosemite is an evaluation board for the RM9000x2 processor
-+ manufactured by PMC-Sierra
++ base = vp = MALLOC(VARS_MAX);
++ ASSERT(vp);
+
-+config HYPERTRANSPORT
-+ bool "Hypertransport Support for PMC-Sierra Yosemite"
-+ depends on PMC_YOSEMITE
++ i = 0;
++ do {
++ tup = cis[i++];
++ tlen = cis[i++];
+
-+config DDB5074
-+ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select I8259
-+ select ISA
-+ help
-+ This enables support for the VR5000-based NEC DDB Vrc-5074
-+ evaluation board.
++ switch (tup) {
++ case CISTPL_MANFID:
++ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
++ vp++;
++ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
++ vp++;
++ break;
+
-+config DDB5476
-+ bool "Support for NEC DDB Vrc-5476"
-+ select DMA_NONCOHERENT
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select I8259
-+ select ISA
-+ help
-+ This enables support for the R5432-based NEC DDB Vrc-5476
-+ evaluation board.
++ case CISTPL_FUNCE:
++ if (cis[i] == LAN_NID) {
++ ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
++ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
++ }
++ break;
+
-+ Features : kernel debugging, serial terminal, NFS root fs, on-board
-+ ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
-+ IDE controller, PS2 keyboard, PS2 mouse, etc.
++ case CISTPL_CFTABLE:
++ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
++ vp++;
++ break;
+
-+config DDB5477
-+ bool "Support for NEC DDB Vrc-5477"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select I8259
-+ select IRQ_CPU
-+ help
-+ This enables support for the R5432-based NEC DDB Vrc-5477,
-+ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
++ case CISTPL_BRCM_HNBU:
++ switch (cis[i]) {
++ case HNBU_CHIPID:
++ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
++ vp++;
++ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
++ vp++;
++ if (tlen == 7) {
++ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
++ vp++;
++ }
++ break;
+
-+ Features : kernel debugging, serial terminal, NFS root fs, on-board
-+ ether port USB, AC97, PCI, etc.
++ case HNBU_BOARDREV:
++ vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+config DDB5477_BUS_FREQUENCY
-+ int "bus frequency (in kHZ, 0 for auto-detect)"
-+ depends on DDB5477
-+ default 0
++ case HNBU_AA:
++ vp += sprintf(vp, "aa0=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+config NEC_OSPREY
-+ bool "Support for NEC Osprey board"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
++ case HNBU_AG:
++ vp += sprintf(vp, "ag0=%d", cis[i + 1]);
++ vp++;
++ ag_init = TRUE;
++ break;
+
-+config SGI_IP22
-+ bool "Support for SGI IP22 (Indy/Indigo2)"
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select IP22_CPU_SCACHE
-+ select IRQ_CPU
-+ select SWAP_IO_SPACE
-+ help
-+ This are the SGI Indy, Challenge S and Indigo2, as well as certain
-+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel
-+ that runs on these, say Y here.
-+
-+config SGI_IP27
-+ bool "Support for SGI IP27 (Origin200/2000)"
-+ depends on MIPS64
-+ select ARC
-+ select ARC64
-+ select DMA_IP27
-+ select HW_HAS_PCI
-+ select PCI_DOMAINS
-+ help
-+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
-+ workstations. To compile a Linux kernel that runs on these, say Y
-+ here.
-+
-+#config SGI_SN0_XXL
-+# bool "IP27 XXL"
-+# depends on SGI_IP27
-+# This options adds support for userspace processes upto 16TB size.
-+# Normally the limit is just .5TB.
-+
-+config SGI_SN0_N_MODE
-+ bool "IP27 N-Mode"
-+ depends on SGI_IP27
-+ help
-+ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-+ configured in either N-Modes which allows for more nodes or M-Mode
-+ which allows for more memory. Your system is most probably
-+ running in M-Mode, so you should say N here.
-+
-+config DISCONTIGMEM
-+ bool
-+ default y if SGI_IP27
-+ help
-+ Say Y to upport efficient handling of discontiguous physical memory,
-+ for architectures which are either NUMA (Non-Uniform Memory Access)
-+ or have huge holes in the physical address space for other reasons.
-+ See <file:Documentation/vm/numa> for more.
-+
-+config NUMA
-+ bool "NUMA Support"
-+ depends on SGI_IP27
-+ help
-+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-+ Access). This option is for configuring high-end multiprocessor
-+ server machines. If in doubt, say N.
++ case HNBU_CC:
++ vp += sprintf(vp, "cc=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+config MAPPED_KERNEL
-+ bool "Mapped kernel support"
-+ depends on SGI_IP27
-+ help
-+ Change the way a Linux kernel is loaded into memory on a MIPS64
-+ machine. This is required in order to support text replication and
-+ NUMA. If you need to understand it, read the source code.
++ case HNBU_PAPARMS:
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
++ vp++;
++ if (tlen == 9) {
++ /* New version */
++ for (j = 0; j < 3; j++) {
++ vp += sprintf(vp, "pa0b%d=%d", j,
++ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
++ vp++;
++ }
++ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
++ vp++;
++ }
++ break;
+
-+config REPLICATE_KTEXT
-+ bool "Kernel text replication support"
-+ depends on SGI_IP27
-+ help
-+ Say Y here to enable replicating the kernel text across multiple
-+ nodes in a NUMA cluster. This trades memory for speed.
++ case HNBU_OEM:
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
++ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
++ vp++;
++ break;
++ case HNBU_BOARDFLAGS:
++ w = (cis[i + 2] << 8) + cis[i + 1];
++ if (w == 0xffff) w = 0;
++ vp += sprintf(vp, "boardflags=%d", w);
++ vp++;
++ break;
++ case HNBU_LED:
++ if (cis[i + 1] != 0xff) {
++ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
++ vp++;
++ }
++ if (cis[i + 2] != 0xff) {
++ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
++ vp++;
++ }
++ if (cis[i + 3] != 0xff) {
++ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
++ vp++;
++ }
++ if (cis[i + 4] != 0xff) {
++ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
++ vp++;
++ }
++ break;
++ }
++ break;
+
-+config REPLICATE_EXHANDLERS
-+ bool "Exception handler replication support"
-+ depends on SGI_IP27
-+ help
-+ Say Y here to enable replicating the kernel exception handlers
-+ across multiple nodes in a NUMA cluster. This trades memory for
-+ speed.
-+
-+config SGI_IP32
-+ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
-+ depends on MIPS64 && EXPERIMENTAL
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select OWN_DMA
-+ select DMA_IP32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select R5000_CPU_SCACHE
-+ select RM7000_CPU_SCACHE
-+ help
-+ If you want this kernel to run on SGI O2 workstation, say Y here.
++ }
++ i += tlen;
++ } while (tup != 0xff);
+
-+config SOC_AU1X00
-+ depends on MIPS32
-+ bool "Support for AMD/Alchemy Au1X00 SOCs"
++ /* Set the srom version */
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
+
-+choice
-+ prompt "Au1X00 SOC Type"
-+ depends on SOC_AU1X00
-+ help
-+ Say Y here to enable support for one of three AMD/Alchemy
-+ SOCs. For additional documentation see www.amd.com.
-+
-+config SOC_AU1000
-+ bool "SOC_AU1000"
-+config SOC_AU1100
-+ bool "SOC_AU1100"
-+config SOC_AU1500
-+ bool "SOC_AU1500"
-+config SOC_AU1550
-+ bool "SOC_AU1550"
-+
-+endchoice
-+
-+choice
-+ prompt "AMD/Alchemy Au1x00 board support"
-+ depends on SOC_AU1X00
-+ help
-+ These are evaluation boards built by AMD/Alchemy to
-+ showcase their Au1X00 Internet Edge Processors. The SOC design
-+ is based on the MIPS32 architecture running at 266/400/500MHz
-+ with many integrated peripherals. Further information can be
-+ found at their website, <http://www.amd.com/>. Say Y here if you
-+ wish to build a kernel for this platform.
-+
-+config MIPS_PB1000
-+ bool "PB1000 board"
-+ depends on SOC_AU1000
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
++ /* For now just set boardflags2 to zero */
++ vp += sprintf(vp, "boardflags2=0");
++ vp++;
+
-+config MIPS_PB1100
-+ bool "PB1100 board"
-+ depends on SOC_AU1100
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
++ /* if there is no antenna gain field, set default */
++ if (ag_init == FALSE) {
++ vp += sprintf(vp, "ag0=%d", 0xff);
++ vp++;
++ }
+
-+config MIPS_PB1500
-+ bool "PB1500 board"
-+ depends on SOC_AU1500
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
++ /* final nullbyte terminator */
++ *vp++ = '\0';
++ varsize = (uint)vp - (uint)base;
+
-+config MIPS_PB1550
-+ bool "PB1550 board"
-+ depends on SOC_AU1550
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select MIPS_DISABLE_OBSOLETE_IDE
++ ASSERT(varsize < VARS_MAX);
+
-+config MIPS_DB1000
-+ bool "DB1000 board"
-+ depends on SOC_AU1000
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
++ if (varsize == VARS_MAX) {
++ *vars = base;
++ } else {
++ vp = MALLOC(varsize);
++ ASSERT(vp);
++ bcopy(base, vp, varsize);
++ MFREE(base, VARS_MAX);
++ *vars = vp;
++ }
++ *count = varsize;
+
-+config MIPS_DB1100
-+ bool "DB1100 board"
-+ depends on SOC_AU1100
-+ select DMA_NONCOHERENT
++ return (0);
++}
+
-+config MIPS_DB1500
-+ bool "DB1500 board"
-+ depends on SOC_AU1500
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select MIPS_DISABLE_OBSOLETE_IDE
+
-+config MIPS_DB1550
-+ bool "DB1550 board"
-+ depends on SOC_AU1550
-+ select HW_HAS_PCI
-+ select DMA_COHERENT
-+ select MIPS_DISABLE_OBSOLETE_IDE
++/* set PCMCIA sprom command register */
++static int
++sprom_cmd_pcmcia(void *osh, uint8 cmd)
++{
++ uint8 status;
++ uint wait_cnt = 1000;
+
-+config MIPS_BOSPORUS
-+ bool "Bosporus board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++ /* write sprom command register */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
+
-+config MIPS_MIRAGE
-+ bool "Mirage board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++ /* wait status */
++ while (wait_cnt--) {
++ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
++ if (status & SROM_DONE)
++ return 0;
++ }
++ return 1;
++}
+
-+config MIPS_XXS1500
-+ bool "MyCable XXS1500 board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++/* read a word from the PCMCIA srom */
++static int
++sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
+
-+config MIPS_MTX1
-+ bool "4G Systems MTX-1 board"
-+ depends on SOC_AU1500
-+ select HW_HAS_PCI
-+ select DMA_NONCOHERENT
-+
-+endchoice
-+
-+config SIBYTE_SB1xxx_SOC
-+ bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select BOOT_ELF32
-+ select DMA_COHERENT
-+ select SWAP_IO_SPACE
-+
-+choice
-+ prompt "BCM1xxx SOC-based board"
-+ depends on SIBYTE_SB1xxx_SOC
-+ default SIBYTE_SWARM
-+ help
-+ Enable support for boards based on the SiByte line of SOCs
-+ from Broadcom. There are configurations for the known
-+ evaluation boards, or you can choose "Other" and add your
-+ own board support code.
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
+
-+config SIBYTE_SWARM
-+ bool "BCM91250A-SWARM"
-+ select SIBYTE_SB1250
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
-+config SIBYTE_SENTOSA
-+ bool "BCM91250E-Sentosa"
-+ select SIBYTE_SB1250
++ /* do read */
++ if (sprom_cmd_pcmcia(osh, SROM_READ))
++ return 1;
+
-+config SIBYTE_RHONE
-+ bool "BCM91125E-Rhone"
-+ select SIBYTE_BCM1125H
++ /* read data */
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
+
-+config SIBYTE_CARMEL
-+ bool "BCM91120x-Carmel"
-+ select SIBYTE_BCM1120
++ *data = (data_h << 8) | data_l;
++ return 0;
++}
+
-+config SIBYTE_PTSWARM
-+ bool "BCM91250PT-PTSWARM"
-+ select SIBYTE_SB1250
++/* write a word to the PCMCIA srom */
++static int
++sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
+
-+config SIBYTE_LITTLESUR
-+ bool "BCM91250C2-LittleSur"
-+ select SIBYTE_SB1250
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++ data_l = (uint8)(data & 0xff);
++ data_h = (uint8)((data >> 8) & 0xff);
+
-+config SIBYTE_CRHINE
-+ bool "BCM91120C-CRhine"
-+ select SIBYTE_BCM1120
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
-+config SIBYTE_CRHONE
-+ bool "BCM91125C-CRhone"
-+ select SIBYTE_BCM1125
++ /* write data */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
+
-+config SIBYTE_UNKNOWN
-+ bool "Other"
++ /* do write */
++ return sprom_cmd_pcmcia(osh, SROM_WRITE);
++}
+
-+endchoice
++/*
++ * Read in and validate sprom.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++{
++ int off, nw;
++ uint8 chk8;
++ int i;
+
-+config SIBYTE_BOARD
-+ bool
-+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-+ default y
++ off = byteoff / 2;
++ nw = ROUNDUP(nbytes, 2) / 2;
+
-+choice
-+ prompt "BCM1xxx SOC Type"
-+ depends on SIBYTE_UNKNOWN
-+ default SIBYTE_UNK_BCM1250
-+ help
-+ Since you haven't chosen a known evaluation board from
-+ Broadcom, you must explicitly pick the SOC this kernel is
-+ targetted for.
++ /* read the sprom */
++ for (i = 0; i < nw; i++)
++ buf[i] = R_REG(&sprom[off + i]);
+
-+config SIBYTE_UNK_BCM1250
-+ bool "BCM1250"
-+ select SIBYTE_SB1250
++ if (check_crc) {
++ /* fixup the endianness so crc8 will pass */
++ htol16_buf(buf, nw * 2);
++ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
++ return (1);
++ /* now correct the endianness of the byte array */
++ ltoh16_buf(buf, nw * 2);
++ }
+
-+config SIBYTE_UNK_BCM1120
-+ bool "BCM1120"
-+ select SIBYTE_BCM1120
++ return (0);
++}
+
-+config SIBYTE_UNK_BCM1125
-+ bool "BCM1125"
-+ select SIBYTE_BCM1125
++/*
++ * Initialize nonvolatile variable table from sprom.
++ * Return 0 on success, nonzero on error.
++ */
+
-+config SIBYTE_UNK_BCM1125H
-+ bool "BCM1125H"
-+ select SIBYTE_BCM1125H
++static int
++initvars_srom_pci(void *curmap, char **vars, int *count)
++{
++ uint16 w, b[64];
++ uint8 sromrev;
++ struct ether_addr ea;
++ char eabuf[32];
++ int c, woff, i;
++ char *vp, *base;
+
-+endchoice
++ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
++ return (-1);
+
-+config SIBYTE_SB1250
-+ bool
-+ select HW_HAS_PCI
++ /* top word of sprom contains version and crc8 */
++ sromrev = b[63] & 0xff;
++ if ((sromrev != 1) && (sromrev != 2)) {
++ return (-2);
++ }
+
-+config SIBYTE_BCM1120
-+ bool
-+ select SIBYTE_BCM112X
++ ASSERT(vars);
++ ASSERT(count);
+
-+config SIBYTE_BCM1125
-+ bool
-+ select HW_HAS_PCI
-+ select SIBYTE_BCM112X
++ base = vp = MALLOC(VARS_MAX);
++ ASSERT(vp);
+
-+config SIBYTE_BCM1125H
-+ bool
-+ select HW_HAS_PCI
-+ select SIBYTE_BCM112X
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
+
-+config SIBYTE_BCM112X
-+ bool
++ if (sromrev >= 2) {
++ /* New section takes over the 4th hardware function space */
+
-+choice
-+ prompt "SiByte SOC Stepping"
-+ depends on SIBYTE_SB1xxx_SOC
++ /* Word 28 is boardflags2 */
++ vp += sprintf(vp, "boardflags2=%d", b[28]);
++ vp++;
+
-+config CPU_SB1_PASS_1
-+ bool "1250 Pass1"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
++ /* Word 29 is max power 11a high/low */
++ w = b[29];
++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config CPU_SB1_PASS_2_1250
-+ bool "1250 An"
-+ depends on SIBYTE_SB1250
-+ select CPU_SB1_PASS_2
-+ help
-+ Also called BCM1250 Pass 2
++ /* Words 30-32 set the 11alow pa settings,
++ * 33-35 are the 11ahigh ones.
++ */
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
++ vp++;
++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
++ vp++;
++ }
++ w = b[59];
++ if (w == 0)
++ vp += sprintf(vp, "ccode=");
++ else
++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
++ vp++;
+
-+config CPU_SB1_PASS_2_2
-+ bool "1250 Bn"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
-+ help
-+ Also called BCM1250 Pass 2.2
++ }
+
-+config CPU_SB1_PASS_4
-+ bool "1250 Cn"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
-+ help
-+ Also called BCM1250 Pass 3
++ /* parameter section of sprom starts at byte offset 72 */
++ woff = 72/2;
+
-+config CPU_SB1_PASS_2_112x
-+ bool "112x Hybrid"
-+ depends on SIBYTE_BCM112X
-+ select CPU_SB1_PASS_2
++ /* first 6 bytes are il0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
+
-+config CPU_SB1_PASS_3
-+ bool "112x An"
-+ depends on SIBYTE_BCM112X
-+ select CPU_HAS_PREFETCH
++ /* next 6 bytes are et0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "et0macaddr=%s", eabuf);
++ vp++;
+
-+endchoice
++ /* next 6 bytes are et1macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "et1macaddr=%s", eabuf);
++ vp++;
+
-+config CPU_SB1_PASS_2
-+ bool
++ /*
++ * Enet phy settings one or two singles or a dual
++ * Bits 4-0 : MII address for enet0 (0x1f for not there)
++ * Bits 9-5 : MII address for enet1 (0x1f for not there)
++ * Bit 14 : Mdio for enet0
++ * Bit 15 : Mdio for enet1
++ */
++ w = b[woff];
++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
++ vp++;
++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
++ vp++;
+
-+config SIBYTE_HAS_LDT
-+ bool
-+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-+ default y
++ /* Word 46 has board rev, antennas 0/1 & Country code/control */
++ w = b[46];
++ vp += sprintf(vp, "boardrev=%d", w & 0xff);
++ vp++;
+
-+config SIMULATION
-+ bool "Running under simulation"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Build a kernel suitable for running under the GDB simulator.
-+ Primarily adjusts the kernel's notion of time.
++ if (sromrev > 1)
++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
++ else
++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
++ vp++;
+
-+config SIBYTE_CFE
-+ bool "Booting from CFE"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Make use of the CFE API for enumerating available memory,
-+ controlling secondary CPUs, and possibly console output.
++ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
++ vp++;
+
-+config SIBYTE_CFE_CONSOLE
-+ bool "Use firmware console"
-+ depends on SIBYTE_CFE
-+ help
-+ Use the CFE API's console write routines during boot. Other console
-+ options (VT console, sb1250 duart console, etc.) should not be
-+ configured.
-+
-+config SIBYTE_STANDALONE
-+ bool
-+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-+ default y
-+
-+config SIBYTE_STANDALONE_RAM_SIZE
-+ int "Memory size (in megabytes)"
-+ depends on SIBYTE_STANDALONE
-+ default "32"
-+
-+config SIBYTE_BUS_WATCHER
-+ bool "Support for Bus Watcher statistics"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Handle and keep statistics on the bus error interrupts (COR_ECC,
-+ BAD_ECC, IO_BUS).
++ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
++ vp++;
+
-+config SIBYTE_BW_TRACE
-+ bool "Capture bus trace before bus error"
-+ depends on SIBYTE_BUS_WATCHER
-+ help
-+ Run a continuous bus trace, dumping the raw data as soon as
-+ a ZBbus error is detected. Cannot work if ZBbus profiling
-+ is turned on, and also will interfere with JTAG-based trace
-+ buffer activity. Raw buffer data is dumped to console, and
-+ must be processed off-line.
-+
-+config SIBYTE_SB1250_PROF
-+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-+ depends on SIBYTE_SB1xxx_SOC
-+
-+config SIBYTE_TBPROF
-+ bool "Support for ZBbus profiling"
-+ depends on SIBYTE_SB1xxx_SOC
-+
-+config SNI_RM200_PCI
-+ bool "Support for SNI RM200 PCI"
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select GENERIC_ISA_DMA
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select I8259
-+ select ISA
-+ help
-+ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
-+ Nixdorf Informationssysteme (SNI), parent company of Pyramid
-+ Technology and now in turn merged with Fujitsu. Say Y here to
-+ support this machine type.
-+
-+config TOSHIBA_RBTX4927
-+ bool "Support for Toshiba TBTX49[23]7 board"
-+ depends on MIPS32
-+ select DMA_NONCOHERENT
-+ select HAS_TXX9_SERIAL
-+ select HW_HAS_PCI
-+ select I8259
-+ select ISA
-+ select SWAP_IO_SPACE
-+ help
-+ This Toshiba board is based on the TX4927 processor. Say Y here to
-+ support this machine type
++ /* Words 47-49 set the (wl) pa settings */
++ woff = 47;
+
-+config TOSHIBA_FPCIB0
-+ bool "FPCIB0 Backplane Support"
-+ depends on TOSHIBA_RBTX4927
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
++ vp++;
++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
++ vp++;
++ }
+
-+config RWSEM_GENERIC_SPINLOCK
-+ bool
-+ default y
++ /*
++ * Words 50-51 set the customer-configured wl led behavior.
++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1;
++ * LED behavior values defined in wlioctl.h .
++ */
++ w = b[50];
++ if ((w != 0) && (w != 0xffff)) {
++ /* gpio0 */
++ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
++ vp++;
+
-+config RWSEM_XCHGADD_ALGORITHM
-+ bool
++ /* gpio1 */
++ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++ w = b[51];
++ if ((w != 0) && (w != 0xffff)) {
++ /* gpio2 */
++ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
++ vp++;
+
-+config GENERIC_CALIBRATE_DELAY
-+ bool
-+ default y
++ /* gpio3 */
++ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++
++ /* Word 52 is max power 0/1 */
++ w = b[52];
++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config HAVE_DEC_LOCK
-+ bool
-+ default y
++ /* Word 56 is idle tssi target 0/1 */
++ w = b[56];
++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
++ vp++;
+
-+#
-+# Select some configuration options automatically based on user selections.
-+#
-+config ARC
-+ bool
-+ depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-+ default y
-+
-+config DMA_COHERENT
-+ bool
-+
-+config DMA_IP27
-+ bool
-+
-+config DMA_NONCOHERENT
-+ bool
-+
-+config EARLY_PRINTK
-+ bool
-+ depends on MACH_DECSTATION
-+ default y
-+
-+config GENERIC_ISA_DMA
-+ bool
-+ depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-+ default y
-+
-+config I8259
-+ bool
-+ depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-+ default y
-+
-+config LIMITED_DMA
-+ bool
-+ select HIGHMEM
-+
-+config MIPS_BONITO64
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA
-+ default y
-+
-+config MIPS_MSC
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA
-+ default y
-+
-+config MIPS_NILE4
-+ bool
-+ depends on LASAT
-+ default y
-+
-+config MIPS_DISABLE_OBSOLETE_IDE
-+ bool
-+
-+config CPU_LITTLE_ENDIAN
-+ bool "Generate little endian code"
-+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-+ default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
-+ help
-+ Some MIPS machines can be configured for either little or big endian
-+ byte order. These modes require different kernels. Say Y if your
-+ machine is little endian, N if it's a big endian machine.
++ /* Word 57 is boardflags, if not programmed make it zero */
++ w = b[57];
++ if (w == 0xffff) w = 0;
++ vp += sprintf(vp, "boardflags=%d", w);
++ vp++;
+
-+config IRQ_CPU
-+ bool
++ /* Word 58 is antenna gain 0/1 */
++ w = b[58];
++ vp += sprintf(vp, "ag0=%d", w & 0xff);
++ vp++;
+
-+config IRQ_CPU_RM7K
-+ bool
++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config IRQ_MV64340
-+ bool
-+
-+config DDB5XXX_COMMON
-+ bool
-+ depends on DDB5074 || DDB5476 || DDB5477
-+ default y
-+
-+config MIPS_BOARDS_GEN
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-+ default y
-+
-+config MIPS_GT64111
-+ bool
-+ depends on MIPS_COBALT
-+ default y
++ if (sromrev == 1) {
++ /* set the oem string */
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ ((b[59] >> 8) & 0xff), (b[59] & 0xff),
++ ((b[60] >> 8) & 0xff), (b[60] & 0xff),
++ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
++ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
++ vp++;
++ }
+
-+config MIPS_GT64120
-+ bool
-+ depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-+ default y
++ /* final nullbyte terminator */
++ *vp++ = '\0';
+
-+config MIPS_TX3927
-+ bool
-+ depends on TOSHIBA_JMR3927
-+ select HAS_TXX9_SERIAL
-+ default y
++ c = vp - base;
++ ASSERT(c <= VARS_MAX);
+
-+config PCI_MARVELL
-+ bool
++ if (c == VARS_MAX) {
++ *vars = base;
++ } else {
++ vp = MALLOC(c);
++ ASSERT(vp);
++ bcopy(base, vp, c);
++ MFREE(base, VARS_MAX);
++ *vars = vp;
++ }
++ *count = c;
+
-+config ITE_BOARD_GEN
-+ bool
-+ depends on MIPS_IVR || MIPS_ITE8172
-+ default y
++ return (0);
++}
+
-+config SWAP_IO_SPACE
-+ bool
++/*
++ * Read the cis and call parsecis to initialize the vars.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_cis_pcmcia(void *osh, char **vars, int *count)
++{
++ uint8 *cis = NULL;
++ int rc;
+
-+#
-+# Unfortunately not all GT64120 systems run the chip at the same clock.
-+# As the user for the clock rate and try to minimize the available options.
-+#
-+choice
-+ prompt "Galileo Chip Clock"
-+ #default SYSCLK_83 if MIPS_EV64120
-+ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
-+ default SYSCLK_83 if MIPS_EV64120
-+ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
++ if ((cis = MALLOC(CIS_SIZE)) == NULL)
++ return (-1);
+
-+config SYSCLK_75
-+ bool "75" if MIPS_EV64120
++ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
+
-+config SYSCLK_83
-+ bool "83.3" if MIPS_EV64120
++ rc = srom_parsecis(cis, vars, count);
+
-+config SYSCLK_100
-+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
++ MFREE(cis, CIS_SIZE);
+
-+endchoice
++ return (rc);
++}
+
-+config AU1X00_USB_DEVICE
-+ bool
-+ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
-+ default n
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200
+@@ -0,0 +1,691 @@
++/*
++ * Misc useful OS-independent routines.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+config MIPS_GT96100
-+ bool
-+ depends on MIPS_EV96100
-+ default y
-+ help
-+ Say Y here to support the Galileo Technology GT96100 communications
-+ controller card. There is a web page at <http://www.galileot.com/>.
-+
-+config IT8172_CIR
-+ bool
-+ depends on MIPS_ITE8172 || MIPS_IVR
-+ default y
-+
-+config IT8712
-+ bool
-+ depends on MIPS_ITE8172
-+ default y
-+
-+config BOOT_ELF32
-+ bool
-+ depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-+ default y
-+
-+config MIPS_L1_CACHE_SHIFT
-+ int
-+ default "4" if MACH_DECSTATION
-+ default "7" if SGI_IP27
-+ default "5"
-+
-+config ARC32
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+ default y
-+
-+config FB
-+ bool
-+ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
-+ default y
-+ ---help---
-+ The frame buffer device provides an abstraction for the graphics
-+ hardware. It represents the frame buffer of some video hardware and
-+ allows application software to access the graphics hardware through
-+ a well-defined interface, so the software doesn't need to know
-+ anything about the low-level (hardware register) stuff.
-+
-+ Frame buffer devices work identically across the different
-+ architectures supported by Linux and make the implementation of
-+ application programs easier and more portable; at this point, an X
-+ server exists which uses the frame buffer device exclusively.
-+ On several non-X86 architectures, the frame buffer device is the
-+ only way to use the graphics hardware.
-+
-+ The device is accessed through special device nodes, usually located
-+ in the /dev directory, i.e. /dev/fb*.
-+
-+ You need an utility program called fbset to make full use of frame
-+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+ and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
-+ for more information.
-+
-+ Say Y here and to the driver for your graphics board below if you
-+ are compiling a kernel for a non-x86 architecture.
-+
-+ If you are compiling for the x86 architecture, you can say Y if you
-+ want to play with it, but it is not essential. Please note that
-+ running graphical applications that directly touch the hardware
-+ (e.g. an accelerated X server) and that are not frame buffer
-+ device-aware may cause unexpected results. If unsure, say N.
-+
-+config HAVE_STD_PC_SERIAL_PORT
-+ bool
-+
-+config VR4181
-+ bool
-+ depends on NEC_OSPREY
-+ default y
-+
-+config ARC_CONSOLE
-+ bool "ARC console support"
-+ depends on SGI_IP22 || SNI_RM200_PCI
-+
-+config ARC_MEMORY
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
-+ default y
-+
-+config ARC_PROMLIB
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+ default y
-+
-+config ARC64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+config BOOT_ELF64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+#config MAPPED_PCI_IO y
-+# bool
-+# depends on SGI_IP27
-+# default y
-+
-+config QL_ISP_A64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+config TOSHIBA_BOARDS
-+ bool
-+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+ default y
-+
-+endmenu
-+
-+menu "CPU selection"
-+
-+choice
-+ prompt "CPU type"
-+ default CPU_R4X00
-+
-+config CPU_MIPS32
-+ bool "MIPS32"
-+
-+config CPU_MIPS64
-+ bool "MIPS64"
-+
-+config CPU_R3000
-+ bool "R3000"
-+ depends on MIPS32
-+ help
-+ Please make sure to pick the right CPU type. Linux/MIPS is not
-+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will
-+ *not* work on R4000 machines and vice versa. However, since most
-+ of the supported machines have an R4000 (or similar) CPU, R4x00
-+ might be a safe bet. If the resulting kernel does not work,
-+ try to recompile with R3000.
-+
-+config CPU_TX39XX
-+ bool "R39XX"
-+ depends on MIPS32
-+
-+config CPU_VR41XX
-+ bool "R41xx"
-+ help
-+ The options selects support for the NEC VR41xx series of processors.
-+ Only choose this option if you have one of these processors as a
-+ kernel built with this option will not run on any other type of
-+ processor or vice versa.
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
+
-+config CPU_R4300
-+ bool "R4300"
-+ help
-+ MIPS Technologies R4300-series processors.
++unsigned char bcm_ctype[] = {
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
++ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
++ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
++ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */
++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */
++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */
++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */
++};
+
-+config CPU_R4X00
-+ bool "R4x00"
-+ help
-+ MIPS Technologies R4000-series processors other than 4300, including
-+ the R4000, R4400, R4600, and 4700.
++uchar
++bcm_toupper(uchar c)
++{
++ if (bcm_islower(c))
++ c -= 'a'-'A';
++ return (c);
++}
+
-+config CPU_TX49XX
-+ bool "R49XX"
++ulong
++bcm_strtoul(char *cp, char **endp, uint base)
++{
++ ulong result, value;
++ bool minus;
++
++ minus = FALSE;
+
-+config CPU_R5000
-+ bool "R5000"
-+ help
-+ MIPS Technologies R5000-series processors other than the Nevada.
++ while (bcm_isspace(*cp))
++ cp++;
++
++ if (cp[0] == '+')
++ cp++;
++ else if (cp[0] == '-') {
++ minus = TRUE;
++ cp++;
++ }
++
++ if (base == 0) {
++ if (cp[0] == '0') {
++ if ((cp[1] == 'x') || (cp[1] == 'X')) {
++ base = 16;
++ cp = &cp[2];
++ } else {
++ base = 8;
++ cp = &cp[1];
++ }
++ } else
++ base = 10;
++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
++ cp = &cp[2];
++ }
++
++ result = 0;
+
-+config CPU_R5432
-+ bool "R5432"
++ while (bcm_isxdigit(*cp) &&
++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
++ result = result*base + value;
++ cp++;
++ }
+
-+config CPU_R6000
-+ bool "R6000"
-+ depends on MIPS32 && EXPERIMENTAL
-+ help
-+ MIPS Technologies R6000 and R6000A series processors. Note these
-+ processors are extremly rare and the support for them is incomplete.
++ if (minus)
++ result = (ulong)(result * -1);
+
-+config CPU_NEVADA
-+ bool "RM52xx"
-+ help
-+ QED / PMC-Sierra RM52xx-series ("Nevada") processors.
++ if (endp)
++ *endp = (char *)cp;
+
-+config CPU_R8000
-+ bool "R8000"
-+ depends on MIPS64 && EXPERIMENTAL
-+ help
-+ MIPS Technologies R8000 processors. Note these processors are
-+ uncommon and the support for them is incomplete.
++ return (result);
++}
+
-+config CPU_R10000
-+ bool "R10000"
-+ help
-+ MIPS Technologies R10000-series processors.
++uint
++bcm_atoi(char *s)
++{
++ uint n;
+
-+config CPU_RM7000
-+ bool "RM7000"
++ n = 0;
+
-+config CPU_RM9000
-+ bool "RM9000"
++ while (bcm_isdigit(*s))
++ n = (n * 10) + *s++ - '0';
++ return (n);
++}
+
-+config CPU_SB1
-+ bool "SB1"
++void
++deadbeef(char *p, uint len)
++{
++ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
+
-+endchoice
++ while (len-- > 0) {
++ *p = meat[((uint)p) & 3];
++ p++;
++ }
++}
+
-+choice
-+ prompt "Kernel page size"
-+ default PAGE_SIZE_4KB
++/* pretty hex print a contiguous buffer */
++void
++prhex(char *msg, uchar *buf, uint nbytes)
++{
++ char line[256];
++ char* p;
++ uint i;
+
-+config PAGE_SIZE_4KB
-+ bool "4kB"
-+ help
-+ This option select the standard 4kB Linux page size. On some
-+ R3000-family processors this is the only available page size. Using
-+ 4kB page size will minimize memory consumption and is therefore
-+ recommended for low memory systems.
-+
-+config PAGE_SIZE_8KB
-+ bool "8kB"
-+ depends on EXPERIMENTAL && CPU_R8000
-+ help
-+ Using 8kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available
-+ only on the R8000 processor. Not that at the time of this writing
-+ this option is still high experimental; there are also issues with
-+ compatibility of user applications.
-+
-+config PAGE_SIZE_16KB
-+ bool "16kB"
-+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+ help
-+ Using 16kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available on
-+ all non-R3000 family processor. Not that at the time of this
-+ writing this option is still high experimental; there are also
-+ issues with compatibility of user applications.
-+
-+config PAGE_SIZE_64KB
-+ bool "64kB"
-+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+ help
-+ Using 64kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available on
-+ all non-R3000 family processor. Not that at the time of this
-+ writing this option is still high experimental; there are also
-+ issues with compatibility of user applications.
++ if (msg && (msg[0] != '\0'))
++ printf("%s: ", msg);
+
-+endchoice
++ p = line;
++ for (i = 0; i < nbytes; i++) {
++ if (i % 16 == 0) {
++ p += sprintf(p, "%04d: ", i); /* line prefix */
++ }
++ p += sprintf(p, "%02x ", buf[i]);
++ if (i % 16 == 15) {
++ printf("%s\n", line); /* flush line */
++ p = line;
++ }
++ }
+
-+config BOARD_SCACHE
-+ bool
++ /* flush last partial line */
++ if (p != line)
++ printf("%s\n", line);
++}
+
-+config IP22_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
++/* pretty hex print a pkt buffer chain */
++void
++prpkt(char *msg, void *drv, void *p0)
++{
++ void *p;
+
-+config R5000_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
++ if (msg && (msg[0] != '\0'))
++ printf("%s: ", msg);
+
-+config RM7000_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
++ for (p = p0; p; p = PKTNEXT(drv, p))
++ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
++}
+
-+config SIBYTE_DMA_PAGEOPS
-+ bool "Use DMA to clear/copy pages"
-+ depends on CPU_SB1
-+ help
-+ Instead of using the CPU to zero and copy pages, use a Data Mover
-+ channel. These DMA channels are otherwise unused by the standard
-+ SiByte Linux port. Seems to give a small performance benefit.
-+
-+config CPU_HAS_PREFETCH
-+ bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
-+ default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
-+
-+config VTAG_ICACHE
-+ bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
-+ default y if CPU_SB1
-+
-+config SB1_PASS_1_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1_PASS_1
-+ default y
-+
-+config SB1_PASS_2_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
-+ default y
-+
-+config SB1_PASS_2_1_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1 && CPU_SB1_PASS_2
-+ default y
-+
-+config 64BIT_PHYS_ADDR
-+ bool "Support for 64-bit physical address space"
-+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
-+
-+config CPU_ADVANCED
-+ bool "Override CPU Options"
-+ depends on MIPS32
-+ help
-+ Saying yes here allows you to select support for various features
-+ your CPU may or may not have. Most people should say N here.
++/* copy a pkt buffer chain into a buffer */
++uint
++pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++{
++ uint n, ret = 0;
+
-+config CPU_HAS_LLSC
-+ bool "ll/sc Instructions available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
-+ help
-+ MIPS R4000 series and later provide the Load Linked (ll)
-+ and Store Conditional (sc) instructions. More information is
-+ available at <http://www.go-ecs.com/mips/miptek1.htm>.
++ if (len < 0)
++ len = 4096; /* "infinite" */
+
-+ Say Y here if your CPU has the ll and sc instructions. Say Y here
-+ for better performance, N if you don't know. You must say Y here
-+ for multiprocessor machines.
++ /* skip 'offset' bytes */
++ for (; p && offset; p = PKTNEXT(drv, p)) {
++ if (offset < (uint)PKTLEN(drv, p))
++ break;
++ offset -= PKTLEN(drv, p);
++ }
+
-+config CPU_HAS_LLDSCD
-+ bool "lld/scd Instructions available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
-+ help
-+ Say Y here if your CPU has the lld and scd instructions, the 64-bit
-+ equivalents of ll and sc. Say Y here for better performance, N if
-+ you don't know. You must say Y here for multiprocessor machines.
++ if (!p)
++ return 0;
+
-+config CPU_HAS_WB
-+ bool "Writeback Buffer available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
-+ help
-+ Say N here for slightly better performance. You must say Y here for
-+ machines which require flushing of write buffers in software. Saying
-+ Y is the safe option; N may result in kernel malfunction and crashes.
++ /* copy the data */
++ for (; p && len; p = PKTNEXT(drv, p)) {
++ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
++ bcopy(PKTDATA(drv, p) + offset, buf, n);
++ buf += n;
++ len -= n;
++ ret += n;
++ offset = 0;
++ }
+
-+config CPU_HAS_SYNC
-+ bool
-+ depends on !CPU_R3000
-+ default y
++ return ret;
++}
+
-+#
-+# - Highmem only makes sense for the 32-bit kernel.
-+# - The current highmem code will only work properly on physically indexed
-+# caches such as R3000, SB1, R7000 or those that look like they're virtually
-+# indexed such as R4000/R4400 SC and MC versions or R10000. So for the
-+# moment we protect the user and offer the highmem option only on machines
-+# where it's known to be safe. This will not offer highmem on a few systems
-+# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
-+# indexed CPUs but we're playing safe.
-+# - We should not offer highmem for system of which we already know that they
-+# don't have memory configurations that could gain from highmem support in
-+# the kernel because they don't support configurations with RAM at physical
-+# addresses > 0x20000000.
-+#
-+config HIGHMEM
-+ bool "High Memory Support"
-+ depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
-+
-+config SMP
-+ bool "Multi-Processing support"
-+ depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
-+ ---help---
-+ This enables support for systems with more than one CPU. If you have
-+ a system with only one CPU, like most personal computers, say N. If
-+ you have a system with more than one CPU, say Y.
-+
-+ If you say N here, the kernel will run on single and multiprocessor
-+ machines, but will use only one CPU of a multiprocessor machine. If
-+ you say Y here, the kernel will run on many, but not all,
-+ singleprocessor machines. On a singleprocessor machine, the kernel
-+ will run faster if you say N here.
-+
-+ People using multiprocessor machines who say Y here should also say
-+ Y to "Enhanced Real Time Clock Support", below.
-+
-+ See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-+ available at <http://www.tldp.org/docs.html#howto>.
-+
-+ If you don't know what to do here, say N.
-+
-+config NR_CPUS
-+ int "Maximum number of CPUs (2-64)"
-+ range 2 64
-+ depends on SMP
-+ default "64" if SGI_IP27
-+ default "2"
-+ help
-+ This allows you to specify the maximum number of CPUs which this
-+ kernel will support. The maximum supported value is 32 for 32-bit
-+ kernel and 64 for 64-bit kernels; the minimum value which makes
-+ sense is 2.
++/* return total length of buffer chain */
++uint
++pkttotlen(void *drv, void *p)
++{
++ uint total;
+
-+ This is purely to save memory - each supported CPU adds
-+ approximately eight kilobytes to the kernel image.
++ total = 0;
++ for (; p; p = PKTNEXT(drv, p))
++ total += PKTLEN(drv, p);
++ return (total);
++}
+
-+config PREEMPT
-+ bool "Preemptible Kernel"
-+ help
-+ This option reduces the latency of the kernel when reacting to
-+ real-time or interactive events by allowing a low priority process to
-+ be preempted even if it is in kernel mode executing a system call.
-+ This allows applications to run more reliably even when the system is
-+ under load.
-+
-+config RTC_DS1742
-+ bool "DS1742 BRAM/RTC support"
-+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+
-+config MIPS_INSANE_LARGE
-+ bool "Support for large 64-bit configurations"
-+ depends on CPU_R10000 && MIPS64
-+ help
-+ MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-+ previous 64-bit processors which only supported 40 bit / 1TB. If you
-+ need processes of more than 1TB virtual address space, say Y here.
-+ This will result in additional memory usage, so it is not
-+ recommended for normal users.
+
-+config RWSEM_GENERIC_SPINLOCK
-+ bool
-+ default y
++uchar*
++bcm_ether_ntoa(char *ea, char *buf)
++{
++ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
++ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
++ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
++ return (buf);
++}
+
-+endmenu
++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
++int
++bcm_ether_atoe(char *p, char *ea)
++{
++ int i = 0;
+
-+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
++ for (;;) {
++ ea[i++] = (char) bcm_strtoul(p, &p, 16);
++ if (!*p++ || i == 6)
++ break;
++ }
+
-+config HW_HAS_PCI
-+ bool
++ return (i == 6);
++}
+
-+config PCI
-+ bool "Support for PCI controller"
-+ depends on HW_HAS_PCI
-+ help
-+ Find out whether you have a PCI motherboard. PCI is the name of a
-+ bus system, i.e. the way the CPU talks to the other stuff inside
-+ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
-+ say Y, otherwise N.
++/*
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value
++ * triples, returning a pointer to the substring whose first element
++ * matches tag. Stop parsing when we see an element whose ID is greater
++ * than the target key.
++ */
++bcm_tlv_t *
++bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++{
++ bcm_tlv_t *elt;
++ int totlen;
+
-+ The PCI-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, contains valuable
-+ information about which PCI hardware does work under Linux and which
-+ doesn't.
++ elt = (bcm_tlv_t*)buf;
++ totlen = buflen;
+
-+config PCI_DOMAINS
-+ bool
-+ depends on PCI
++ /* find tagged parameter */
++ while (totlen >= 2) {
++ uint id = elt->id;
++ int len = elt->len;
++
++ /* Punt if we start seeing IDs > than target key */
++ if (id > key)
++ return(NULL);
+
-+source "drivers/pci/Kconfig"
++ /* validate remaining totlen */
++ if ((id == key) && (totlen >= (len + 2)))
++ return (elt);
+
-+#
-+# ISA support is now enabled via select. Too many systems still have the one
-+# or other ISA chip on the board that users don't know about so don't expect
-+# users to choose the right thing ...
-+#
-+config ISA
-+ bool
++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++ totlen -= (len + 2);
++ }
++ return NULL;
++}
+
-+config EISA
-+ bool "EISA support"
-+ depends on SGI_IP22 || SNI_RM200_PCI
-+ select ISA
-+ ---help---
-+ The Extended Industry Standard Architecture (EISA) bus was
-+ developed as an open alternative to the IBM MicroChannel bus.
+
-+ The EISA bus provided some of the features of the IBM MicroChannel
-+ bus while maintaining backward compatibility with cards made for
-+ the older ISA bus. The EISA bus saw limited use between 1988 and
-+ 1995 when it was made obsolete by the PCI bus.
++/*
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value
++ * triples, returning a pointer to the substring whose first element
++ * matches tag
++ */
++bcm_tlv_t *
++bcm_parse_tlvs(void *buf, int buflen, uint key)
++{
++ bcm_tlv_t *elt;
++ int totlen;
+
-+ Say Y here if you are building a kernel for an EISA-based machine.
++ elt = (bcm_tlv_t*)buf;
++ totlen = buflen;
+
-+ Otherwise, say N.
++ /* find tagged parameter */
++ while (totlen >= 2) {
++ int len = elt->len;
+
-+source "drivers/eisa/Kconfig"
++ /* validate remaining totlen */
++ if ((elt->id == key) && (totlen >= (len + 2)))
++ return (elt);
+
-+config TC
-+ bool "TURBOchannel support"
-+ depends on MACH_DECSTATION
-+ help
-+ TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
-+ processors. Documentation on writing device drivers for TurboChannel
-+ is available at:
-+ <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++ totlen -= (len + 2);
++ }
++
++ return NULL;
++}
+
-+#config ACCESSBUS
-+# bool "Access.Bus support"
-+# depends on TC
++void
++pktqinit(struct pktq *q, int maxlen)
++{
++ q->head = q->tail = NULL;
++ q->maxlen = maxlen;
++ q->len = 0;
++}
+
-+config MMU
-+ bool
-+ default y
++void
++pktenq(struct pktq *q, void *p, bool lifo)
++{
++ ASSERT(PKTLINK(p) == NULL);
+
-+config MCA
-+ bool
++ PKTSETLINK(p, NULL);
+
-+config SBUS
-+ bool
++ if (q->tail == NULL) {
++ ASSERT(q->head == NULL);
++ q->head = q->tail = p;
++ }
++ else {
++ ASSERT(q->head);
++ ASSERT(PKTLINK(q->tail) == NULL);
++ if (lifo) {
++ PKTSETLINK(p, q->head);
++ q->head = p;
++ } else {
++ PKTSETLINK(q->tail, p);
++ q->tail = p;
++ }
++ }
++ q->len++;
++}
+
-+source "drivers/pcmcia/Kconfig"
++void*
++pktdeq(struct pktq *q)
++{
++ void *p;
+
-+source "drivers/pci/hotplug/Kconfig"
++ if ((p = q->head)) {
++ ASSERT(q->tail);
++ q->head = PKTLINK(p);
++ PKTSETLINK(p, NULL);
++ q->len--;
++ if (q->head == NULL)
++ q->tail = NULL;
++ }
++ else {
++ ASSERT(q->tail == NULL);
++ }
+
-+endmenu
++ return (p);
++}
+
-+menu "Executable file formats"
++/*******************************************************************************
++ * crc8
++ *
++ * Computes a crc8 over the input data using the polynomial:
++ *
++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
++ *
++ * The caller provides the initial value (either CRC8_INIT_VALUE
++ * or the previous returned value) to allow for processing of
++ * discontiguous blocks of data. When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream. When checking, a final
++ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
+
-+source "fs/Kconfig.binfmt"
++static uint8 crc8_table[256] = {
++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
++};
+
-+config TRAD_SIGNALS
-+ bool
-+ default y if MIPS32
++/*
++ * Search the name=value vars for a specific one and return its value.
++ * Returns NULL if not found.
++ */
++char*
++getvar(char *vars, char *name)
++{
++ char *s;
++ int len;
+
-+config BUILD_ELF64
-+ bool "Use 64-bit ELF format for building"
-+ depends on MIPS64
-+ help
-+ A 64-bit kernel is usually built using the 64-bit ELF binary object
-+ format as it's one that allows arbitrary 64-bit constructs. For
-+ kernels that are loaded within the KSEG compatibility segments the
-+ 32-bit ELF format can optionally be used resulting in a somewhat
-+ smaller binary, but this option is not explicitly supported by the
-+ toolchain and since binutils 2.14 it does not even work at all.
++ len = strlen(name);
+
-+ Say Y to use the 64-bit format or N to use the 32-bit one.
++ /* first look in vars[] */
++ for (s = vars; s && *s; ) {
++ if ((bcmp(s, name, len) == 0) && (s[len] == '='))
++ return (&s[len+1]);
+
-+ If unsure say Y.
++ while (*s++)
++ ;
++ }
+
-+config BINFMT_IRIX
-+ bool "Include IRIX binary compatibility"
-+ depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
++ /* then query nvram */
++ return (nvram_get(name));
++}
+
-+config MIPS32_COMPAT
-+ bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
-+ depends on MIPS64
-+ help
-+ Select this option if you want Linux/MIPS 32-bit binary
-+ compatibility. Since all software available for Linux/MIPS is
-+ currently 32-bit you should say Y here.
-+
-+config COMPAT
-+ bool
-+ depends on MIPS32_COMPAT
-+ default y
-+
-+config MIPS32_O32
-+ bool "Kernel support for o32 binaries"
-+ depends on MIPS32_COMPAT
-+ help
-+ Select this option if you want to run o32 binaries. These are pure
-+ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
-+ existing binaries are in this format.
++/*
++ * Search the vars for a specific one and return its value as
++ * an integer. Returns 0 if not found.
++ */
++int
++getintvar(char *vars, char *name)
++{
++ char *val;
+
-+ If unsure, say Y.
++ if ((val = getvar(vars, name)) == NULL)
++ return (0);
+
-+config MIPS32_N32
-+ bool "Kernel support for n32 binaries"
-+ depends on MIPS32_COMPAT
-+ help
-+ Select this option if you want to run n32 binaries. These are
-+ 64-bit binaries using 32-bit quantities for addressing and certain
-+ data that would normally be 64-bit. They are used in special
-+ cases.
++ return (bcm_strtoul(val, NULL, 0));
++}
+
-+ If unsure, say N.
++void
++bcm_mdelay(uint ms)
++{
++ uint i;
+
-+config BINFMT_ELF32
-+ bool
-+ default y if MIPS32_O32 || MIPS32_N32
++ for (i = 0; i < ms; i++) {
++ OSL_DELAY(1000);
++ }
++}
+
-+config PM
-+ bool "Power Management support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL && MACH_AU1X00
++#define CRC_INNER_LOOP(n, c, x) \
++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+
-+endmenu
++uint8
++crc8(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
++)
++{
++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
++ while (nbytes-- > 0)
++ crc = crc8_table[(crc ^ *pdata++) & 0xff];
+
-+source "drivers/Kconfig"
++ return crc;
++}
+
-+source "fs/Kconfig"
++/*******************************************************************************
++ * crc16
++ *
++ * Computes a crc16 over the input data using the polynomial:
++ *
++ * x^16 + x^12 +x^5 + 1
++ *
++ * The caller provides the initial value (either CRC16_INIT_VALUE
++ * or the previous returned value) to allow for processing of
++ * discontiguous blocks of data. When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream. When checking, a final
++ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
+
-+source "arch/mips/Kconfig.debug"
++static uint16 crc16_table[256] = {
++ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
++ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
++ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
++ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
++ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
++ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
++ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
++ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
++ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
++ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
++ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
++ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
++ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
++ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
++ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
++ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
++ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
++ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
++ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
++ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
++ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
++ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
++ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
++ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
++ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
++ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
++ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
++ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
++ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
++ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
++ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
++ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
++};
+
-+source "security/Kconfig"
++uint16
++crc16(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint16 crc /* either CRC16_INIT_VALUE or previous return value */
++)
++{
++ while (nbytes-- > 0)
++ CRC_INNER_LOOP(16, crc, *pdata++);
++ return crc;
++}
+
-+source "crypto/Kconfig"
++static uint32 crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
+
-+source "lib/Kconfig"
++uint32
++crc32(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint32 crc /* either CRC32_INIT_VALUE or previous return value */
++)
++{
++ uint8 *pend;
++#ifdef __mips__
++ uint8 tmp[4];
++ ulong *tptr = (ulong *)tmp;
+
-+#
-+# Use the generic interrupt handling code in kernel/irq/:
-+#
-+config GENERIC_HARDIRQS
-+ bool
-+ default y
++ /* in case the beginning of the buffer isn't aligned */
++ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
++ nbytes -= (pend - pdata);
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
+
-+config GENERIC_IRQ_PROBE
-+ bool
-+ default y
++ /* handle bulk of data as 32-bit words */
++ pend = pdata + (nbytes & 0xfffffffc);
++ while (pdata < pend) {
++ *tptr = *((ulong *)pdata)++;
++ CRC_INNER_LOOP(32, crc, tmp[0]);
++ CRC_INNER_LOOP(32, crc, tmp[1]);
++ CRC_INNER_LOOP(32, crc, tmp[2]);
++ CRC_INNER_LOOP(32, crc, tmp[3]);
++ }
+
-+config ISA_DMA_API
-+ bool
-+ default y
-diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
---- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-08-28 16:39:59.077334424 +0200
-@@ -79,7 +79,7 @@
- cflags-y += -I $(TOPDIR)/include/asm/gcc
- cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
- cflags-y += $(call cc-option, -finline-limit=100000)
--LDFLAGS_vmlinux += -G 0 -static -n
-+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
- MODFLAGS += -mlong-calls
-
- cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
-@@ -167,9 +167,10 @@
- $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
- -Wa,--trap
-
--cflags-$(CONFIG_CPU_MIPS32) += \
-- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-- -Wa,--trap
-+#cflags-$(CONFIG_CPU_MIPS32) += \
-+# $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-+# -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32) += -mips2 -Wa,--trap
-
- cflags-$(CONFIG_CPU_MIPS64) += \
- $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-@@ -618,6 +619,14 @@
- load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
-
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
-+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include
-+load-$(CONFIG_BCM947XX) := 0xffffffff80001000
++ /* 1-3 bytes at end of buffer */
++ pend = pdata + (nbytes & 0x03);
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
++#else
++ pend = pdata + nbytes;
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
++#endif
++
++ return crc;
++}
+
++#ifdef notdef
++#define CLEN 1499
++#define CBUFSIZ (CLEN+4)
++#define CNBUFS 5
+
-+#
- # SNI RM200 PCI
- #
- core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
-@@ -729,6 +738,7 @@
- archclean:
- @$(MAKE) $(clean)=arch/mips/boot
- @$(MAKE) $(clean)=arch/mips/lasat
-+ @$(MAKE) -C arch/mips/bcm47xx/compressed clean
-
- # Generate <asm/offset.h
- #
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile 2005-08-28 11:12:20.406862800 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++void testcrc32(void)
++{
++ uint j,k,l;
++ uint8 *buf;
++ uint len[CNBUFS];
++ uint32 crcr;
++ uint32 crc32tv[CNBUFS] =
++ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
+
-+obj-y := irq.o int-handler.o prom.o setup.o time.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
+
-+obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200
-@@ -0,0 +1,685 @@
-+/*
-+ * Misc useful routines to access NIC SROM
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
++ /* step through all possible alignments */
++ for (l=0;l<=4;l++) {
++ for (j=0; j<CNBUFS; j++) {
++ len[j] = CLEN;
++ for (k=0; k<len[j]; k++)
++ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
++ }
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmsrom.h>
-+#include <bcmdevs.h>
-+#include <bcmendian.h>
-+#include <sbpcmcia.h>
-+#include <pcicfg.h>
++ for (j=0; j<CNBUFS; j++) {
++ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
++ ASSERT(crcr == crc32tv[j]);
++ }
++ }
+
-+#include <proto/ethernet.h> /* for sprom content groking */
++ MFREE(buf, CBUFSIZ*CNBUFS);
++ return;
++}
++#endif
+
-+#define VARS_MAX 4096 /* should be reduced */
+
-+static int initvars_srom_pci(void *curmap, char **vars, int *count);
-+static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
-+static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
-+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
-+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
-+static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
+
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200
+@@ -0,0 +1,763 @@
+/*
-+ * Initialize the vars from the right source for this platform.
-+ * Return 0 on success, nonzero on error.
++ * Generic Broadcom Home Networking Division (HND) DMA module.
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
+ */
-+int
-+srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
-+{
-+ if (vars == NULL)
-+ return (0);
-+
-+ switch (bus) {
-+ case SB_BUS:
-+ /* These two could be asserts ... */
-+ *vars = NULL;
-+ *count = 0;
-+ return(0);
+
-+ case PCI_BUS:
-+ ASSERT(curmap); /* can not be NULL */
-+ return(initvars_srom_pci(curmap, vars, count));
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmutils.h>
+
-+ case PCMCIA_BUS:
-+ return(initvars_cis_pcmcia(osh, vars, count));
++struct dma_info; /* forward declaration */
++#define di_t struct dma_info
++#include <hnddma.h>
+
++/* debug/trace */
++#define DMA_ERROR(args)
++#define DMA_TRACE(args)
+
-+ default:
-+ ASSERT(0);
-+ }
-+ return (-1);
-+}
++/* default dma message level(if input msg_level pointer is null in dma_attach()) */
++static uint dma_msg_level = 0;
+
++#define MAXNAMEL 8
++#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t))
+
-+/* support only 16-bit word read from srom */
-+int
-+srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+ void *srom;
-+ uint i, off, nw;
++/* dma engine software state */
++typedef struct dma_info {
++ hnddma_t hnddma; /* exported structure */
++ uint *msg_level; /* message level pointer */
+
-+ /* check input - 16-bit access only */
-+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+ return 1;
++ char name[MAXNAMEL]; /* callers name for diag msgs */
++ void *drv; /* driver handle */
++ void *dev; /* device handle */
++ dmaregs_t *regs; /* dma engine registers */
+
-+ if (bus == PCI_BUS) {
-+ if (!curmap)
-+ return 1;
-+ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
-+ return 1;
-+ } else if (bus == PCMCIA_BUS) {
-+ off = byteoff / 2;
-+ nw = nbytes / 2;
-+ for (i = 0; i < nw; i++) {
-+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
-+ return 1;
-+ }
-+ } else {
-+ return 1;
-+ }
++ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */
++ uint txin; /* index of next descriptor to reclaim */
++ uint txout; /* index of next descriptor to post */
++ uint txavail; /* # free tx descriptors */
++ void *txp[MAXDD]; /* parallel array of pointers to packets */
++ ulong txdpa; /* physical address of descriptor ring */
++ uint txdalign; /* #bytes added to alloc'd mem to align txd */
+
-+ return 0;
-+}
++ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */
++ uint rxin; /* index of next descriptor to reclaim */
++ uint rxout; /* index of next descriptor to post */
++ void *rxp[MAXDD]; /* parallel array of pointers to packets */
++ ulong rxdpa; /* physical address of descriptor ring */
++ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */
+
-+/* support only 16-bit word write into srom */
-+int
-+srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+ uint16 *srom;
-+ uint i, off, nw, crc_range;
-+ uint16 image[SPROM_SIZE], *p;
-+ uint8 crc;
-+ volatile uint32 val32;
++ /* tunables */
++ uint ntxd; /* # tx descriptors */
++ uint nrxd; /* # rx descriptors */
++ uint rxbufsize; /* rx buffer size in bytes */
++ uint nrxpost; /* # rx buffers to keep posted */
++ uint rxoffset; /* rxcontrol offset */
++ uint ddoffset; /* add to get dma address of descriptor ring */
++ uint dataoffset; /* add to get dma address of data buffer */
++} dma_info_t;
+
-+ /* check input - 16-bit access only */
-+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+ return 1;
++/* descriptor bumping macros */
++#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1))
++#define PREVTXD(i) ((i - 1) & (di->ntxd - 1))
++#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1))
++#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1))
++#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1))
+
-+ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
++/* macros to convert between byte offsets and indexes */
++#define B2I(bytes) ((bytes) / sizeof (dmadd_t))
++#define I2B(index) ((index) * sizeof (dmadd_t))
+
-+ /* if changes made inside crc cover range */
-+ if (byteoff < crc_range) {
-+ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
-+ /* read data including entire first 64 words from srom */
-+ if (srom_read(bus, curmap, osh, 0, nw * 2, image))
-+ return 1;
-+ /* make changes */
-+ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
-+ /* calculate crc */
-+ htol16_buf(image, crc_range);
-+ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
-+ ltoh16_buf(image, crc_range);
-+ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
-+ p = image;
-+ off = 0;
-+ } else {
-+ p = buf;
-+ off = byteoff / 2;
-+ nw = nbytes / 2;
-+ }
++void*
++dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
++ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++{
++ dma_info_t *di;
++ void *va;
+
-+ if (bus == PCI_BUS) {
-+ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+ /* enable writes to the SPROM */
-+ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+ val32 |= SPROM_WRITEEN;
-+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
-+ bcm_mdelay(500);
-+ /* write srom */
-+ for (i = 0; i < nw; i++) {
-+ W_REG(&srom[off + i], p[i]);
-+ bcm_mdelay(20);
-+ }
-+ /* disable writes to the SPROM */
-+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
-+ } else if (bus == PCMCIA_BUS) {
-+ /* enable writes to the SPROM */
-+ if (sprom_cmd_pcmcia(osh, SROM_WEN))
-+ return 1;
-+ bcm_mdelay(500);
-+ /* write srom */
-+ for (i = 0; i < nw; i++) {
-+ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
-+ bcm_mdelay(20);
-+ }
-+ /* disable writes to the SPROM */
-+ if (sprom_cmd_pcmcia(osh, SROM_WDS))
-+ return 1;
-+ } else {
-+ return 1;
-+ }
++ ASSERT(ntxd <= MAXDD);
++ ASSERT(nrxd <= MAXDD);
+
-+ bcm_mdelay(500);
-+ return 0;
-+}
++ /* allocate private info structure */
++ if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
++ return (NULL);
++ bzero((char*)di, sizeof (dma_info_t));
+
++ /* set message level */
++ di->msg_level = msg_level ? msg_level : &dma_msg_level;
+
-+int
-+srom_parsecis(uint8 *cis, char **vars, int *count)
-+{
-+ char eabuf[32];
-+ char *vp, *base;
-+ uint8 tup, tlen, sromrev = 1;
-+ int i, j;
-+ uint varsize;
-+ bool ag_init = FALSE;
-+ uint16 w;
++ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
+
-+ ASSERT(vars);
-+ ASSERT(count);
++ /* make a private copy of our callers name */
++ strncpy(di->name, name, MAXNAMEL);
++ di->name[MAXNAMEL-1] = '\0';
+
-+ base = vp = MALLOC(VARS_MAX);
-+ ASSERT(vp);
++ di->drv = drv;
++ di->dev = dev;
++ di->regs = regs;
+
-+ i = 0;
-+ do {
-+ tup = cis[i++];
-+ tlen = cis[i++];
++ /* allocate transmit descriptor ring */
++ if (ntxd) {
++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
++ goto fail;
++ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++ di->txdalign = ((uint)di->txd - (uint)va);
++ di->txdpa = di->txdpa + di->txdalign;
++ ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
++ }
+
-+ switch (tup) {
-+ case CISTPL_MANFID:
-+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
-+ vp++;
-+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
-+ vp++;
-+ break;
-+
-+ case CISTPL_FUNCE:
-+ if (cis[i] == LAN_NID) {
-+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
-+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
-+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+ vp++;
-+ }
-+ break;
-+
-+ case CISTPL_CFTABLE:
-+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
-+ vp++;
-+ break;
++ /* allocate receive descriptor ring */
++ if (nrxd) {
++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
++ goto fail;
++ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++ di->rxdalign = ((uint)di->rxd - (uint)va);
++ di->rxdpa = di->rxdpa + di->rxdalign;
++ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
++ }
+
-+ case CISTPL_BRCM_HNBU:
-+ switch (cis[i]) {
-+ case HNBU_CHIPID:
-+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
-+ vp++;
-+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
-+ vp++;
-+ if (tlen == 7) {
-+ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
-+ vp++;
-+ }
-+ break;
++ /* save tunables */
++ di->ntxd = ntxd;
++ di->nrxd = nrxd;
++ di->rxbufsize = rxbufsize;
++ di->nrxpost = nrxpost;
++ di->rxoffset = rxoffset;
++ di->ddoffset = ddoffset;
++ di->dataoffset = dataoffset;
+
-+ case HNBU_BOARDREV:
-+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
-+ vp++;
-+ break;
++ return ((void*)di);
+
-+ case HNBU_AA:
-+ vp += sprintf(vp, "aa0=%d", cis[i + 1]);
-+ vp++;
-+ break;
++fail:
++ dma_detach((void*)di);
++ return (NULL);
++}
+
-+ case HNBU_AG:
-+ vp += sprintf(vp, "ag0=%d", cis[i + 1]);
-+ vp++;
-+ ag_init = TRUE;
-+ break;
++/* may be called with core in reset */
++void
++dma_detach(dma_info_t *di)
++{
++ if (di == NULL)
++ return;
+
-+ case HNBU_CC:
-+ vp += sprintf(vp, "cc=%d", cis[i + 1]);
-+ vp++;
-+ break;
++ DMA_TRACE(("%s: dma_detach\n", di->name));
+
-+ case HNBU_PAPARMS:
-+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
-+ vp++;
-+ if (tlen == 9) {
-+ /* New version */
-+ for (j = 0; j < 3; j++) {
-+ vp += sprintf(vp, "pa0b%d=%d", j,
-+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
-+ vp++;
-+ }
-+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
-+ vp++;
-+ }
-+ break;
++ /* shouldn't be here if descriptors are unreclaimed */
++ ASSERT(di->txin == di->txout);
++ ASSERT(di->rxin == di->rxout);
+
-+ case HNBU_OEM:
-+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
-+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
-+ vp++;
-+ break;
-+ case HNBU_BOARDFLAGS:
-+ w = (cis[i + 2] << 8) + cis[i + 1];
-+ if (w == 0xffff) w = 0;
-+ vp += sprintf(vp, "boardflags=%d", w);
-+ vp++;
-+ break;
-+ case HNBU_LED:
-+ if (cis[i + 1] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
-+ vp++;
-+ }
-+ if (cis[i + 2] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
-+ vp++;
-+ }
-+ if (cis[i + 3] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
-+ vp++;
-+ }
-+ if (cis[i + 4] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
-+ vp++;
-+ }
-+ break;
-+ }
-+ break;
++ /* free dma descriptor rings */
++ if (di->txd)
++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
++ if (di->rxd)
++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
+
-+ }
-+ i += tlen;
-+ } while (tup != 0xff);
++ /* free our private info structure */
++ MFREE((void*)di, sizeof (dma_info_t));
++}
+
-+ /* Set the srom version */
-+ vp += sprintf(vp, "sromrev=%d", sromrev);
-+ vp++;
+
-+ /* For now just set boardflags2 to zero */
-+ vp += sprintf(vp, "boardflags2=0");
-+ vp++;
++void
++dma_txreset(dma_info_t *di)
++{
++ uint32 status;
+
-+ /* if there is no antenna gain field, set default */
-+ if (ag_init == FALSE) {
-+ vp += sprintf(vp, "ag0=%d", 0xff);
-+ vp++;
-+ }
++ DMA_TRACE(("%s: dma_txreset\n", di->name));
+
-+ /* final nullbyte terminator */
-+ *vp++ = '\0';
-+ varsize = (uint)vp - (uint)base;
++ /* suspend tx DMA first */
++ W_REG(&di->regs->xmtcontrol, XC_SE);
++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
++ status != XS_XS_IDLE &&
++ status != XS_XS_STOPPED,
++ 10000);
+
-+ ASSERT(varsize < VARS_MAX);
++ W_REG(&di->regs->xmtcontrol, 0);
++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
++ 10000);
+
-+ if (varsize == VARS_MAX) {
-+ *vars = base;
-+ } else {
-+ vp = MALLOC(varsize);
-+ ASSERT(vp);
-+ bcopy(base, vp, varsize);
-+ MFREE(base, VARS_MAX);
-+ *vars = vp;
++ if (status != XS_XS_DISABLED) {
++ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
+ }
-+ *count = varsize;
+
-+ return (0);
++ /* wait for the last transaction to complete */
++ OSL_DELAY(300);
+}
+
-+
-+/* set PCMCIA sprom command register */
-+static int
-+sprom_cmd_pcmcia(void *osh, uint8 cmd)
++void
++dma_rxreset(dma_info_t *di)
+{
-+ uint8 status;
-+ uint wait_cnt = 1000;
++ uint32 status;
+
-+ /* write sprom command register */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
++ DMA_TRACE(("%s: dma_rxreset\n", di->name));
+
-+ /* wait status */
-+ while (wait_cnt--) {
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
-+ if (status & SROM_DONE)
-+ return 0;
++ W_REG(&di->regs->rcvcontrol, 0);
++ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
++ 10000);
++
++ if (status != RS_RS_DISABLED) {
++ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
+ }
-+ return 1;
+}
+
-+/* read a word from the PCMCIA srom */
-+static int
-+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++void
++dma_txinit(dma_info_t *di)
+{
-+ uint8 addr_l, addr_h, data_l, data_h;
-+
-+ addr_l = (uint8)((addr * 2) & 0xff);
-+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+
-+ /* set address */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++ DMA_TRACE(("%s: dma_txinit\n", di->name));
+
-+ /* do read */
-+ if (sprom_cmd_pcmcia(osh, SROM_READ))
-+ return 1;
++ di->txin = di->txout = 0;
++ di->txavail = di->ntxd - 1;
+
-+ /* read data */
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
++ /* clear tx descriptor ring */
++ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
+
-+ *data = (data_h << 8) | data_l;
-+ return 0;
++ W_REG(&di->regs->xmtcontrol, XC_XE);
++ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
+}
+
-+/* write a word to the PCMCIA srom */
-+static int
-+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++bool
++dma_txenabled(dma_info_t *di)
+{
-+ uint8 addr_l, addr_h, data_l, data_h;
++ uint32 xc;
+
-+ addr_l = (uint8)((addr * 2) & 0xff);
-+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+ data_l = (uint8)(data & 0xff);
-+ data_h = (uint8)((data >> 8) & 0xff);
++ /* If the chip is dead, it is not enabled :-) */
++ xc = R_REG(&di->regs->xmtcontrol);
++ return ((xc != 0xffffffff) && (xc & XC_XE));
++}
+
-+ /* set address */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++void
++dma_txsuspend(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_txsuspend\n", di->name));
++ OR_REG(&di->regs->xmtcontrol, XC_SE);
++}
+
-+ /* write data */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
-+
-+ /* do write */
-+ return sprom_cmd_pcmcia(osh, SROM_WRITE);
++void
++dma_txresume(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_txresume\n", di->name));
++ AND_REG(&di->regs->xmtcontrol, ~XC_SE);
+}
+
-+/*
-+ * Read in and validate sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++bool
++dma_txsuspended(dma_info_t *di)
+{
-+ int off, nw;
-+ uint8 chk8;
-+ int i;
-+
-+ off = byteoff / 2;
-+ nw = ROUNDUP(nbytes, 2) / 2;
-+
-+ /* read the sprom */
-+ for (i = 0; i < nw; i++)
-+ buf[i] = R_REG(&sprom[off + i]);
++ uint32 xc;
++ uint32 xs;
+
-+ if (check_crc) {
-+ /* fixup the endianness so crc8 will pass */
-+ htol16_buf(buf, nw * 2);
-+ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
-+ return (1);
-+ /* now correct the endianness of the byte array */
-+ ltoh16_buf(buf, nw * 2);
++ xc = R_REG(&di->regs->xmtcontrol);
++ if (xc & XC_SE) {
++ xs = R_REG(&di->regs->xmtstatus);
++ return ((xs & XS_XS_MASK) == XS_XS_IDLE);
+ }
-+
-+ return (0);
++ return 0;
+}
+
-+/*
-+ * Initialize nonvolatile variable table from sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+
-+static int
-+initvars_srom_pci(void *curmap, char **vars, int *count)
++bool
++dma_txstopped(dma_info_t *di)
+{
-+ uint16 w, b[64];
-+ uint8 sromrev;
-+ struct ether_addr ea;
-+ char eabuf[32];
-+ int c, woff, i;
-+ char *vp, *base;
-+
-+ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
-+ return (-1);
-+
-+ /* top word of sprom contains version and crc8 */
-+ sromrev = b[63] & 0xff;
-+ if ((sromrev != 1) && (sromrev != 2)) {
-+ return (-2);
-+ }
++ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++}
+
-+ ASSERT(vars);
-+ ASSERT(count);
++bool
++dma_rxstopped(dma_info_t *di)
++{
++ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++}
+
-+ base = vp = MALLOC(VARS_MAX);
-+ ASSERT(vp);
++void
++dma_fifoloopbackenable(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
++ OR_REG(&di->regs->xmtcontrol, XC_LE);
++}
+
-+ vp += sprintf(vp, "sromrev=%d", sromrev);
-+ vp++;
++void
++dma_rxinit(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_rxinit\n", di->name));
+
-+ if (sromrev >= 2) {
-+ /* New section takes over the 4th hardware function space */
++ di->rxin = di->rxout = 0;
+
-+ /* Word 28 is boardflags2 */
-+ vp += sprintf(vp, "boardflags2=%d", b[28]);
-+ vp++;
++ /* clear rx descriptor ring */
++ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
+
-+ /* Word 29 is max power 11a high/low */
-+ w = b[29];
-+ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
-+ vp++;
++ dma_rxenable(di);
++ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++}
+
-+ /* Words 30-32 set the 11alow pa settings,
-+ * 33-35 are the 11ahigh ones.
-+ */
-+ for (i = 0; i < 3; i++) {
-+ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
-+ vp++;
-+ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
-+ vp++;
-+ }
-+ w = b[59];
-+ if (w == 0)
-+ vp += sprintf(vp, "ccode=");
-+ else
-+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+ vp++;
++void
++dma_rxenable(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_rxenable\n", di->name));
++ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
++}
+
-+ }
++bool
++dma_rxenabled(dma_info_t *di)
++{
++ uint32 rc;
+
-+ /* parameter section of sprom starts at byte offset 72 */
-+ woff = 72/2;
++ rc = R_REG(&di->regs->rcvcontrol);
++ return ((rc != 0xffffffff) && (rc & RC_RE));
++}
+
-+ /* first 6 bytes are il0macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+ vp++;
++/*
++ * The BCM47XX family supports full 32bit dma engine buffer addressing so
++ * dma buffers can cross 4 Kbyte page boundaries.
++ */
++int
++dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++{
++ void *p, *next;
++ uchar *data;
++ uint len;
++ uint txout;
++ uint32 ctrl;
++ uint32 pa;
+
-+ /* next 6 bytes are et0macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "et0macaddr=%s", eabuf);
-+ vp++;
++ DMA_TRACE(("%s: dma_txfast\n", di->name));
+
-+ /* next 6 bytes are et1macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "et1macaddr=%s", eabuf);
-+ vp++;
++ txout = di->txout;
++ ctrl = 0;
+
+ /*
-+ * Enet phy settings one or two singles or a dual
-+ * Bits 4-0 : MII address for enet0 (0x1f for not there)
-+ * Bits 9-5 : MII address for enet1 (0x1f for not there)
-+ * Bit 14 : Mdio for enet0
-+ * Bit 15 : Mdio for enet1
++ * Walk the chain of packet buffers
++ * allocating and initializing transmit descriptor entries.
+ */
-+ w = b[woff];
-+ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
-+ vp++;
-+ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
-+ vp++;
-+ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
-+ vp++;
-+ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
-+ vp++;
++ for (p = p0; p; p = next) {
++ data = PKTDATA(di->drv, p);
++ len = PKTLEN(di->drv, p);
++ next = PKTNEXT(di->drv, p);
+
-+ /* Word 46 has board rev, antennas 0/1 & Country code/control */
-+ w = b[46];
-+ vp += sprintf(vp, "boardrev=%d", w & 0xff);
-+ vp++;
++ /* return nonzero if out of tx descriptors */
++ if (NEXTTXD(txout) == di->txin)
++ goto outoftxd;
+
-+ if (sromrev > 1)
-+ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
-+ else
-+ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
-+ vp++;
++ if (len == 0)
++ continue;
+
-+ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
-+ vp++;
++ /* get physical address of buffer start */
++ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
+
-+ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
-+ vp++;
++ /* build the descriptor control value */
++ ctrl = len & CTRL_BC_MASK;
+
-+ /* Words 47-49 set the (wl) pa settings */
-+ woff = 47;
++ ctrl |= coreflags;
++
++ if (p == p0)
++ ctrl |= CTRL_SOF;
++ if (next == NULL)
++ ctrl |= (CTRL_IOC | CTRL_EOF);
++ if (txout == (di->ntxd - 1))
++ ctrl |= CTRL_EOT;
+
-+ for (i = 0; i < 3; i++) {
-+ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
-+ vp++;
-+ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
-+ vp++;
++ /* init the tx descriptor */
++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++
++ ASSERT(di->txp[txout] == NULL);
++
++ txout = NEXTTXD(txout);
+ }
+
-+ /*
-+ * Words 50-51 set the customer-configured wl led behavior.
-+ * 8 bits/gpio pin. High bit: activehi=0, activelo=1;
-+ * LED behavior values defined in wlioctl.h .
-+ */
-+ w = b[50];
-+ if ((w != 0) && (w != 0xffff)) {
-+ /* gpio0 */
-+ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
-+ vp++;
-+
-+ /* gpio1 */
-+ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
-+ vp++;
-+ }
-+ w = b[51];
-+ if ((w != 0) && (w != 0xffff)) {
-+ /* gpio2 */
-+ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
-+ vp++;
-+
-+ /* gpio3 */
-+ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
-+ vp++;
-+ }
-+
-+ /* Word 52 is max power 0/1 */
-+ w = b[52];
-+ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
-+ vp++;
-+
-+ /* Word 56 is idle tssi target 0/1 */
-+ w = b[56];
-+ vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
-+ vp++;
-+
-+ /* Word 57 is boardflags, if not programmed make it zero */
-+ w = b[57];
-+ if (w == 0xffff) w = 0;
-+ vp += sprintf(vp, "boardflags=%d", w);
-+ vp++;
-+
-+ /* Word 58 is antenna gain 0/1 */
-+ w = b[58];
-+ vp += sprintf(vp, "ag0=%d", w & 0xff);
-+ vp++;
-+
-+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+ vp++;
++ /* if last txd eof not set, fix it */
++ if (!(ctrl & CTRL_EOF))
++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
-+ if (sromrev == 1) {
-+ /* set the oem string */
-+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+ ((b[59] >> 8) & 0xff), (b[59] & 0xff),
-+ ((b[60] >> 8) & 0xff), (b[60] & 0xff),
-+ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
-+ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
-+ vp++;
-+ }
++ /* save the packet */
++ di->txp[PREVTXD(txout)] = p0;
+
-+ /* final nullbyte terminator */
-+ *vp++ = '\0';
++ /* bump the tx descriptor index */
++ di->txout = txout;
+
-+ c = vp - base;
-+ ASSERT(c <= VARS_MAX);
++ /* kick the chip */
++ W_REG(&di->regs->xmtptr, I2B(txout));
+
-+ if (c == VARS_MAX) {
-+ *vars = base;
-+ } else {
-+ vp = MALLOC(c);
-+ ASSERT(vp);
-+ bcopy(base, vp, c);
-+ MFREE(base, VARS_MAX);
-+ *vars = vp;
-+ }
-+ *count = c;
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+ return (0);
++
++outoftxd:
++ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
++ PKTFREE(di->drv, p0, TRUE);
++ di->txavail = 0;
++ di->hnddma.txnobuf++;
++ return (-1);
+}
+
++#define PAGESZ 4096
++#define PAGEBASE(x) ((uint)(x) & ~4095)
++
+/*
-+ * Read the cis and call parsecis to initialize the vars.
-+ * Return 0 on success, nonzero on error.
++ * Just like above except go through the extra effort of splitting
++ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
+ */
-+static int
-+initvars_cis_pcmcia(void *osh, char **vars, int *count)
++int
++dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
+{
-+ uint8 *cis = NULL;
-+ int rc;
++ void *p, *next;
++ uchar *data;
++ uint plen, len;
++ uchar *page, *start, *end;
++ uint txout;
++ uint32 ctrl;
++ uint32 pa;
+
-+ if ((cis = MALLOC(CIS_SIZE)) == NULL)
-+ return (-1);
++ DMA_TRACE(("%s: dma_tx\n", di->name));
+
-+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
++ txout = di->txout;
++ ctrl = 0;
+
-+ rc = srom_parsecis(cis, vars, count);
++ /*
++ * Walk the chain of packet buffers
++ * splitting those that cross 4 Kbyte boundaries
++ * allocating and initializing transmit descriptor entries.
++ */
++ for (p = p0; p; p = next) {
++ data = PKTDATA(di->drv, p);
++ plen = PKTLEN(di->drv, p);
++ next = PKTNEXT(di->drv, p);
+
-+ MFREE(cis, CIS_SIZE);
++ if (plen == 0)
++ continue;
+
-+ return (rc);
-+}
++ for (page = (uchar*)PAGEBASE(data);
++ page <= (uchar*)PAGEBASE(data + plen - 1);
++ page += PAGESZ) {
+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200
-@@ -0,0 +1,691 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
++ /* return nonzero if out of tx descriptors */
++ if (NEXTTXD(txout) == di->txin)
++ goto outoftxd;
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
++ start = (page == (uchar*)PAGEBASE(data))? data: page;
++ end = (page == (uchar*)PAGEBASE(data + plen))?
++ (data + plen): (page + PAGESZ);
++ len = end - start;
+
-+unsigned char bcm_ctype[] = {
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
-+ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
-+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
-+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
-+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
-+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
-+ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
-+ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
-+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */
-+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */
-+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */
-+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */
-+};
++ /* build the descriptor control value */
++ ctrl = len & CTRL_BC_MASK;
+
-+uchar
-+bcm_toupper(uchar c)
-+{
-+ if (bcm_islower(c))
-+ c -= 'a'-'A';
-+ return (c);
-+}
++ ctrl |= coreflags;
+
-+ulong
-+bcm_strtoul(char *cp, char **endp, uint base)
-+{
-+ ulong result, value;
-+ bool minus;
-+
-+ minus = FALSE;
++ if ((p == p0) && (start == data))
++ ctrl |= CTRL_SOF;
++ if ((next == NULL) && (end == (data + plen)))
++ ctrl |= (CTRL_IOC | CTRL_EOF);
++ if (txout == (di->ntxd - 1))
++ ctrl |= CTRL_EOT;
+
-+ while (bcm_isspace(*cp))
-+ cp++;
-+
-+ if (cp[0] == '+')
-+ cp++;
-+ else if (cp[0] == '-') {
-+ minus = TRUE;
-+ cp++;
-+ }
-+
-+ if (base == 0) {
-+ if (cp[0] == '0') {
-+ if ((cp[1] == 'x') || (cp[1] == 'X')) {
-+ base = 16;
-+ cp = &cp[2];
-+ } else {
-+ base = 8;
-+ cp = &cp[1];
-+ }
-+ } else
-+ base = 10;
-+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
-+ cp = &cp[2];
-+ }
-+
-+ result = 0;
++ /* get physical address of buffer start */
++ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
+
-+ while (bcm_isxdigit(*cp) &&
-+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
-+ result = result*base + value;
-+ cp++;
-+ }
++ /* init the tx descriptor */
++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
+
-+ if (minus)
-+ result = (ulong)(result * -1);
++ ASSERT(di->txp[txout] == NULL);
+
-+ if (endp)
-+ *endp = (char *)cp;
++ txout = NEXTTXD(txout);
++ }
++ }
+
-+ return (result);
-+}
++ /* if last txd eof not set, fix it */
++ if (!(ctrl & CTRL_EOF))
++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
-+uint
-+bcm_atoi(char *s)
-+{
-+ uint n;
++ /* save the packet */
++ di->txp[PREVTXD(txout)] = p0;
+
-+ n = 0;
++ /* bump the tx descriptor index */
++ di->txout = txout;
+
-+ while (bcm_isdigit(*s))
-+ n = (n * 10) + *s++ - '0';
-+ return (n);
-+}
++ /* kick the chip */
++ W_REG(&di->regs->xmtptr, I2B(txout));
+
-+void
-+deadbeef(char *p, uint len)
-+{
-+ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
-+ while (len-- > 0) {
-+ *p = meat[((uint)p) & 3];
-+ p++;
-+ }
++ return (0);
++
++outoftxd:
++ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
++ PKTFREE(di->drv, p0, TRUE);
++ di->txavail = 0;
++ di->hnddma.txnobuf++;
++ return (-1);
+}
+
-+/* pretty hex print a contiguous buffer */
-+void
-+prhex(char *msg, uchar *buf, uint nbytes)
++/* returns a pointer to the next frame received, or NULL if there are no more */
++void*
++dma_rx(dma_info_t *di)
+{
-+ char line[256];
-+ char* p;
-+ uint i;
-+
-+ if (msg && (msg[0] != '\0'))
-+ printf("%s: ", msg);
++ void *p;
++ uint len;
++ int skiplen = 0;
+
-+ p = line;
-+ for (i = 0; i < nbytes; i++) {
-+ if (i % 16 == 0) {
-+ p += sprintf(p, "%04d: ", i); /* line prefix */
++ while ((p = dma_getnextrxp(di, FALSE))) {
++ /* skip giant packets which span multiple rx descriptors */
++ if (skiplen > 0) {
++ skiplen -= di->rxbufsize;
++ if (skiplen < 0)
++ skiplen = 0;
++ PKTFREE(di->drv, p, FALSE);
++ continue;
+ }
-+ p += sprintf(p, "%02x ", buf[i]);
-+ if (i % 16 == 15) {
-+ printf("%s\n", line); /* flush line */
-+ p = line;
++
++ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
++ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
++
++ /* bad frame length check */
++ if (len > (di->rxbufsize - di->rxoffset)) {
++ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
++ if (len > 0)
++ skiplen = len - (di->rxbufsize - di->rxoffset);
++ PKTFREE(di->drv, p, FALSE);
++ di->hnddma.rxgiants++;
++ continue;
+ }
++
++ /* set actual length */
++ PKTSETLEN(di->drv, p, (di->rxoffset + len));
++
++ break;
+ }
+
-+ /* flush last partial line */
-+ if (p != line)
-+ printf("%s\n", line);
++ return (p);
+}
+
-+/* pretty hex print a pkt buffer chain */
++/* post receive buffers */
+void
-+prpkt(char *msg, void *drv, void *p0)
++dma_rxfill(dma_info_t *di)
+{
+ void *p;
++ uint rxin, rxout;
++ uint ctrl;
++ uint n;
++ uint i;
++ uint32 pa;
++ uint rxbufsize;
+
-+ if (msg && (msg[0] != '\0'))
-+ printf("%s: ", msg);
++ /*
++ * Determine how many receive buffers we're lacking
++ * from the full complement, allocate, initialize,
++ * and post them, then update the chip rx lastdscr.
++ */
+
-+ for (p = p0; p; p = PKTNEXT(drv, p))
-+ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
-+}
++ rxin = di->rxin;
++ rxout = di->rxout;
++ rxbufsize = di->rxbufsize;
+
-+/* copy a pkt buffer chain into a buffer */
-+uint
-+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
-+{
-+ uint n, ret = 0;
++ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
+
-+ if (len < 0)
-+ len = 4096; /* "infinite" */
++ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
+
-+ /* skip 'offset' bytes */
-+ for (; p && offset; p = PKTNEXT(drv, p)) {
-+ if (offset < (uint)PKTLEN(drv, p))
++ for (i = 0; i < n; i++) {
++ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
++ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
++ di->hnddma.rxnobuf++;
+ break;
-+ offset -= PKTLEN(drv, p);
-+ }
++ }
+
-+ if (!p)
-+ return 0;
++ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
+
-+ /* copy the data */
-+ for (; p && len; p = PKTNEXT(drv, p)) {
-+ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
-+ bcopy(PKTDATA(drv, p) + offset, buf, n);
-+ buf += n;
-+ len -= n;
-+ ret += n;
-+ offset = 0;
-+ }
++ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
++ ASSERT(ISALIGNED(pa, 4));
+
-+ return ret;
-+}
++ /* save the free packet pointer */
++ ASSERT(di->rxp[rxout] == NULL);
++ di->rxp[rxout] = p;
+
-+/* return total length of buffer chain */
-+uint
-+pkttotlen(void *drv, void *p)
-+{
-+ uint total;
++ /* prep the descriptor control value */
++ ctrl = rxbufsize;
++ if (rxout == (di->nrxd - 1))
++ ctrl |= CTRL_EOT;
+
-+ total = 0;
-+ for (; p; p = PKTNEXT(drv, p))
-+ total += PKTLEN(drv, p);
-+ return (total);
-+}
++ /* init the rx descriptor */
++ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
+
++ rxout = NEXTRXD(rxout);
++ }
+
-+uchar*
-+bcm_ether_ntoa(char *ea, char *buf)
-+{
-+ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
-+ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
-+ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
-+ return (buf);
++ di->rxout = rxout;
++
++ /* update the chip lastdscr pointer */
++ W_REG(&di->regs->rcvptr, I2B(rxout));
+}
+
-+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
-+int
-+bcm_ether_atoe(char *p, char *ea)
++void
++dma_txreclaim(dma_info_t *di, bool forceall)
+{
-+ int i = 0;
++ void *p;
+
-+ for (;;) {
-+ ea[i++] = (char) bcm_strtoul(p, &p, 16);
-+ if (!*p++ || i == 6)
-+ break;
-+ }
++ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
+
-+ return (i == 6);
++ while ((p = dma_getnexttxp(di, forceall)))
++ PKTFREE(di->drv, p, TRUE);
+}
+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag. Stop parsing when we see an element whose ID is greater
-+ * than the target key.
++/*
++ * Reclaim next completed txd (txds if using chained buffers) and
++ * return associated packet.
++ * If 'force' is true, reclaim txd(s) and return associated packet
++ * regardless of the value of the hardware "curr" pointer.
+ */
-+bcm_tlv_t *
-+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++void*
++dma_getnexttxp(dma_info_t *di, bool forceall)
+{
-+ bcm_tlv_t *elt;
-+ int totlen;
++ uint start, end, i;
++ void *txp;
+
-+ elt = (bcm_tlv_t*)buf;
-+ totlen = buflen;
++ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
+
-+ /* find tagged parameter */
-+ while (totlen >= 2) {
-+ uint id = elt->id;
-+ int len = elt->len;
-+
-+ /* Punt if we start seeing IDs > than target key */
-+ if (id > key)
-+ return(NULL);
++ txp = NULL;
+
-+ /* validate remaining totlen */
-+ if ((id == key) && (totlen >= (len + 2)))
-+ return (elt);
++ start = di->txin;
++ if (forceall)
++ end = di->txout;
++ else
++ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
+
-+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+ totlen -= (len + 2);
++ if ((start == 0) && (end > di->txout))
++ goto bogus;
++
++ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
++ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
++ W_SM(&di->txd[i].addr, 0xdeadbeef);
++ txp = di->txp[i];
++ di->txp[i] = NULL;
+ }
-+ return NULL;
-+}
+
++ di->txin = i;
+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag
-+ */
-+bcm_tlv_t *
-+bcm_parse_tlvs(void *buf, int buflen, uint key)
-+{
-+ bcm_tlv_t *elt;
-+ int totlen;
-+
-+ elt = (bcm_tlv_t*)buf;
-+ totlen = buflen;
-+
-+ /* find tagged parameter */
-+ while (totlen >= 2) {
-+ int len = elt->len;
-+
-+ /* validate remaining totlen */
-+ if ((elt->id == key) && (totlen >= (len + 2)))
-+ return (elt);
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
-+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+ totlen -= (len + 2);
-+ }
-+
-+ return NULL;
-+}
++ return (txp);
+
-+void
-+pktqinit(struct pktq *q, int maxlen)
-+{
-+ q->head = q->tail = NULL;
-+ q->maxlen = maxlen;
-+ q->len = 0;
++bogus:
++/*
++ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
++ start, end, di->txout, forceall));
++*/
++ return (NULL);
+}
+
+void
-+pktenq(struct pktq *q, void *p, bool lifo)
++dma_rxreclaim(dma_info_t *di)
+{
-+ ASSERT(PKTLINK(p) == NULL);
++ void *p;
+
-+ PKTSETLINK(p, NULL);
++ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
+
-+ if (q->tail == NULL) {
-+ ASSERT(q->head == NULL);
-+ q->head = q->tail = p;
-+ }
-+ else {
-+ ASSERT(q->head);
-+ ASSERT(PKTLINK(q->tail) == NULL);
-+ if (lifo) {
-+ PKTSETLINK(p, q->head);
-+ q->head = p;
-+ } else {
-+ PKTSETLINK(q->tail, p);
-+ q->tail = p;
-+ }
-+ }
-+ q->len++;
++ while ((p = dma_getnextrxp(di, TRUE)))
++ PKTFREE(di->drv, p, FALSE);
+}
+
-+void*
-+pktdeq(struct pktq *q)
++void *
++dma_getnextrxp(dma_info_t *di, bool forceall)
+{
-+ void *p;
-+
-+ if ((p = q->head)) {
-+ ASSERT(q->tail);
-+ q->head = PKTLINK(p);
-+ PKTSETLINK(p, NULL);
-+ q->len--;
-+ if (q->head == NULL)
-+ q->tail = NULL;
-+ }
-+ else {
-+ ASSERT(q->tail == NULL);
-+ }
++ uint i;
++ void *rxp;
+
-+ return (p);
-+}
++ /* if forcing, dma engine must be disabled */
++ ASSERT(!forceall || !dma_rxenabled(di));
+
-+/*******************************************************************************
-+ * crc8
-+ *
-+ * Computes a crc8 over the input data using the polynomial:
-+ *
-+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
-+ *
-+ * The caller provides the initial value (either CRC8_INIT_VALUE
-+ * or the previous returned value) to allow for processing of
-+ * discontiguous blocks of data. When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream. When checking, a final
-+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
-+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ ******************************************************************************/
++ i = di->rxin;
+
-+static uint8 crc8_table[256] = {
-+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-+};
++ /* return if no packets posted */
++ if (i == di->rxout)
++ return (NULL);
+
-+/*
-+ * Search the name=value vars for a specific one and return its value.
-+ * Returns NULL if not found.
-+ */
-+char*
-+getvar(char *vars, char *name)
-+{
-+ char *s;
-+ int len;
++ /* ignore curr if forceall */
++ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
++ return (NULL);
+
-+ len = strlen(name);
++ /* get the packet pointer that corresponds to the rx descriptor */
++ rxp = di->rxp[i];
++ ASSERT(rxp);
++ di->rxp[i] = NULL;
+
-+ /* first look in vars[] */
-+ for (s = vars; s && *s; ) {
-+ if ((bcmp(s, name, len) == 0) && (s[len] == '='))
-+ return (&s[len+1]);
++ /* clear this packet from the descriptor ring */
++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
++ di->rxbufsize, DMA_RX, rxp);
++ W_SM(&di->rxd[i].addr, 0xdeadbeef);
+
-+ while (*s++)
-+ ;
-+ }
++ di->rxin = NEXTRXD(i);
+
-+ /* then query nvram */
-+ return (nvram_get(name));
++ return (rxp);
+}
+
-+/*
-+ * Search the vars for a specific one and return its value as
-+ * an integer. Returns 0 if not found.
-+ */
-+int
-+getintvar(char *vars, char *name)
++char*
++dma_dumptx(dma_info_t *di, char *buf)
+{
-+ char *val;
-+
-+ if ((val = getvar(vars, name)) == NULL)
-+ return (0);
++ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
++ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
++ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
++ R_REG(&di->regs->xmtcontrol),
++ R_REG(&di->regs->xmtaddr),
++ R_REG(&di->regs->xmtptr),
++ R_REG(&di->regs->xmtstatus));
++ return (buf);
++}
+
-+ return (bcm_strtoul(val, NULL, 0));
++char*
++dma_dumprx(dma_info_t *di, char *buf)
++{
++ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
++ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
++ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
++ R_REG(&di->regs->rcvcontrol),
++ R_REG(&di->regs->rcvaddr),
++ R_REG(&di->regs->rcvptr),
++ R_REG(&di->regs->rcvstatus));
++ return (buf);
+}
+
-+void
-+bcm_mdelay(uint ms)
++char*
++dma_dump(dma_info_t *di, char *buf)
+{
-+ uint i;
++ buf = dma_dumptx(di, buf);
++ buf = dma_dumprx(di, buf);
++ return (buf);
++}
+
-+ for (i = 0; i < ms; i++) {
-+ OSL_DELAY(1000);
++uint
++dma_getvar(dma_info_t *di, char *name)
++{
++ if (!strcmp(name, "&txavail"))
++ return ((uint) &di->txavail);
++ else {
++ ASSERT(0);
+ }
++ return (0);
+}
+
-+#define CRC_INNER_LOOP(n, c, x) \
-+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-+
-+uint8
-+crc8(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
-+)
++void
++dma_txblock(dma_info_t *di)
+{
-+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
-+ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
-+ while (nbytes-- > 0)
-+ crc = crc8_table[(crc ^ *pdata++) & 0xff];
++ di->txavail = 0;
++}
+
-+ return crc;
++void
++dma_txunblock(dma_info_t *di)
++{
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+}
+
-+/*******************************************************************************
-+ * crc16
-+ *
-+ * Computes a crc16 over the input data using the polynomial:
-+ *
-+ * x^16 + x^12 +x^5 + 1
-+ *
-+ * The caller provides the initial value (either CRC16_INIT_VALUE
-+ * or the previous returned value) to allow for processing of
-+ * discontiguous blocks of data. When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream. When checking, a final
-+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
-+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ ******************************************************************************/
-+
-+static uint16 crc16_table[256] = {
-+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
-+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
-+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
-+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
-+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
-+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
-+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
-+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
-+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
-+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
-+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
-+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
-+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
-+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
-+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
-+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
-+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
-+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
-+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
-+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
-+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
-+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
-+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
-+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
-+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
-+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
-+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
-+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
-+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
-+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
-+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
-+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
-+};
-+
-+uint16
-+crc16(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */
-+)
-+{
-+ while (nbytes-- > 0)
-+ CRC_INNER_LOOP(16, crc, *pdata++);
-+ return crc;
-+}
-+
-+static uint32 crc32_table[256] = {
-+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
-+
-+uint32
-+crc32(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */
-+)
-+{
-+ uint8 *pend;
-+#ifdef __mips__
-+ uint8 tmp[4];
-+ ulong *tptr = (ulong *)tmp;
-+
-+ /* in case the beginning of the buffer isn't aligned */
-+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
-+ nbytes -= (pend - pdata);
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
-+
-+ /* handle bulk of data as 32-bit words */
-+ pend = pdata + (nbytes & 0xfffffffc);
-+ while (pdata < pend) {
-+ *tptr = *((ulong *)pdata)++;
-+ CRC_INNER_LOOP(32, crc, tmp[0]);
-+ CRC_INNER_LOOP(32, crc, tmp[1]);
-+ CRC_INNER_LOOP(32, crc, tmp[2]);
-+ CRC_INNER_LOOP(32, crc, tmp[3]);
-+ }
-+
-+ /* 1-3 bytes at end of buffer */
-+ pend = pdata + (nbytes & 0x03);
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
-+#else
-+ pend = pdata + nbytes;
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
-+#endif
-+
-+ return crc;
-+}
-+
-+#ifdef notdef
-+#define CLEN 1499
-+#define CBUFSIZ (CLEN+4)
-+#define CNBUFS 5
-+
-+void testcrc32(void)
++uint
++dma_txactive(dma_info_t *di)
+{
-+ uint j,k,l;
-+ uint8 *buf;
-+ uint len[CNBUFS];
-+ uint32 crcr;
-+ uint32 crc32tv[CNBUFS] =
-+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
-+
-+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
-+
-+ /* step through all possible alignments */
-+ for (l=0;l<=4;l++) {
-+ for (j=0; j<CNBUFS; j++) {
-+ len[j] = CLEN;
-+ for (k=0; k<len[j]; k++)
-+ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
-+ }
-+
-+ for (j=0; j<CNBUFS; j++) {
-+ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
-+ ASSERT(crcr == crc32tv[j]);
-+ }
-+ }
-+
-+ MFREE(buf, CBUFSIZ*CNBUFS);
-+ return;
++ return (NTXDACTIVE(di->txin, di->txout));
+}
-+#endif
-+
-+
-+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200
-@@ -0,0 +1,763 @@
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200
+@@ -0,0 +1,420 @@
+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA module.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
++ * Linux OS Independent Layer
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
+ */
+
++#define LINUX_OSL
++
+#include <typedefs.h>
-+#include <osl.h>
+#include <bcmendian.h>
++#include <linuxver.h>
++#include <linux_osl.h>
+#include <bcmutils.h>
++#include <linux/delay.h>
++#ifdef mips
++#include <asm/paccess.h>
++#endif
++#include <pcicfg.h>
+
-+struct dma_info; /* forward declaration */
-+#define di_t struct dma_info
-+#include <hnddma.h>
-+
-+/* debug/trace */
-+#define DMA_ERROR(args)
-+#define DMA_TRACE(args)
++#define PCI_CFG_RETRY 10
+
-+/* default dma message level(if input msg_level pointer is null in dma_attach()) */
-+static uint dma_msg_level = 0;
++void*
++osl_pktget(void *drv, uint len, bool send)
++{
++ struct sk_buff *skb;
+
-+#define MAXNAMEL 8
-+#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t))
++ if ((skb = dev_alloc_skb(len)) == NULL)
++ return (NULL);
+
-+/* dma engine software state */
-+typedef struct dma_info {
-+ hnddma_t hnddma; /* exported structure */
-+ uint *msg_level; /* message level pointer */
++ skb_put(skb, len);
+
-+ char name[MAXNAMEL]; /* callers name for diag msgs */
-+ void *drv; /* driver handle */
-+ void *dev; /* device handle */
-+ dmaregs_t *regs; /* dma engine registers */
++ /* ensure the cookie field is cleared */
++ PKTSETCOOKIE(skb, NULL);
+
-+ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */
-+ uint txin; /* index of next descriptor to reclaim */
-+ uint txout; /* index of next descriptor to post */
-+ uint txavail; /* # free tx descriptors */
-+ void *txp[MAXDD]; /* parallel array of pointers to packets */
-+ ulong txdpa; /* physical address of descriptor ring */
-+ uint txdalign; /* #bytes added to alloc'd mem to align txd */
-+
-+ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */
-+ uint rxin; /* index of next descriptor to reclaim */
-+ uint rxout; /* index of next descriptor to post */
-+ void *rxp[MAXDD]; /* parallel array of pointers to packets */
-+ ulong rxdpa; /* physical address of descriptor ring */
-+ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */
-+
-+ /* tunables */
-+ uint ntxd; /* # tx descriptors */
-+ uint nrxd; /* # rx descriptors */
-+ uint rxbufsize; /* rx buffer size in bytes */
-+ uint nrxpost; /* # rx buffers to keep posted */
-+ uint rxoffset; /* rxcontrol offset */
-+ uint ddoffset; /* add to get dma address of descriptor ring */
-+ uint dataoffset; /* add to get dma address of data buffer */
-+} dma_info_t;
-+
-+/* descriptor bumping macros */
-+#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1))
-+#define PREVTXD(i) ((i - 1) & (di->ntxd - 1))
-+#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1))
-+#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1))
-+#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1))
-+
-+/* macros to convert between byte offsets and indexes */
-+#define B2I(bytes) ((bytes) / sizeof (dmadd_t))
-+#define I2B(index) ((index) * sizeof (dmadd_t))
++ return ((void*) skb);
++}
+
-+void*
-+dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
-+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++void
++osl_pktfree(void *p)
+{
-+ dma_info_t *di;
-+ void *va;
-+
-+ ASSERT(ntxd <= MAXDD);
-+ ASSERT(nrxd <= MAXDD);
-+
-+ /* allocate private info structure */
-+ if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
-+ return (NULL);
-+ bzero((char*)di, sizeof (dma_info_t));
-+
-+ /* set message level */
-+ di->msg_level = msg_level ? msg_level : &dma_msg_level;
-+
-+ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
-+
-+ /* make a private copy of our callers name */
-+ strncpy(di->name, name, MAXNAMEL);
-+ di->name[MAXNAMEL-1] = '\0';
-+
-+ di->drv = drv;
-+ di->dev = dev;
-+ di->regs = regs;
++ struct sk_buff *skb, *nskb;
+
-+ /* allocate transmit descriptor ring */
-+ if (ntxd) {
-+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
-+ goto fail;
-+ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+ di->txdalign = ((uint)di->txd - (uint)va);
-+ di->txdpa = di->txdpa + di->txdalign;
-+ ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
-+ }
++ skb = (struct sk_buff*) p;
+
-+ /* allocate receive descriptor ring */
-+ if (nrxd) {
-+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
-+ goto fail;
-+ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+ di->rxdalign = ((uint)di->rxd - (uint)va);
-+ di->rxdpa = di->rxdpa + di->rxdalign;
-+ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
++ /* perversion: we use skb->next to chain multi-skb packets */
++ while (skb) {
++ nskb = skb->next;
++ skb->next = NULL;
++ if (skb->destructor) {
++ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
++ dev_kfree_skb_any(skb);
++ } else {
++ /* can free immediately (even in_irq()) if destructor does not exist */
++ dev_kfree_skb(skb);
++ }
++ skb = nskb;
+ }
-+
-+ /* save tunables */
-+ di->ntxd = ntxd;
-+ di->nrxd = nrxd;
-+ di->rxbufsize = rxbufsize;
-+ di->nrxpost = nrxpost;
-+ di->rxoffset = rxoffset;
-+ di->ddoffset = ddoffset;
-+ di->dataoffset = dataoffset;
-+
-+ return ((void*)di);
-+
-+fail:
-+ dma_detach((void*)di);
-+ return (NULL);
+}
+
-+/* may be called with core in reset */
-+void
-+dma_detach(dma_info_t *di)
++uint32
++osl_pci_read_config(void *loc, uint offset, uint size)
+{
-+ if (di == NULL)
-+ return;
++ struct pci_dev *pdev;
++ uint val;
++ uint retry=PCI_CFG_RETRY;
+
-+ DMA_TRACE(("%s: dma_detach\n", di->name));
++ /* only 4byte access supported */
++ ASSERT(size == 4);
+
-+ /* shouldn't be here if descriptors are unreclaimed */
-+ ASSERT(di->txin == di->txout);
-+ ASSERT(di->rxin == di->rxout);
++ pdev = (struct pci_dev*)loc;
++ do {
++ pci_read_config_dword(pdev, offset, &val);
++ if (val != 0xffffffff)
++ break;
++ } while (retry--);
+
-+ /* free dma descriptor rings */
-+ if (di->txd)
-+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
-+ if (di->rxd)
-+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
+
-+ /* free our private info structure */
-+ MFREE((void*)di, sizeof (dma_info_t));
++ return (val);
+}
+
-+
+void
-+dma_txreset(dma_info_t *di)
++osl_pci_write_config(void *loc, uint offset, uint size, uint val)
+{
-+ uint32 status;
-+
-+ DMA_TRACE(("%s: dma_txreset\n", di->name));
++ struct pci_dev *pdev;
++ uint retry=PCI_CFG_RETRY;
+
-+ /* suspend tx DMA first */
-+ W_REG(&di->regs->xmtcontrol, XC_SE);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
-+ status != XS_XS_IDLE &&
-+ status != XS_XS_STOPPED,
-+ 10000);
++ /* only 4byte access supported */
++ ASSERT(size == 4);
+
-+ W_REG(&di->regs->xmtcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
-+ 10000);
++ pdev = (struct pci_dev*)loc;
+
-+ if (status != XS_XS_DISABLED) {
-+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
-+ }
++ do {
++ pci_write_config_dword(pdev, offset, val);
++ if (offset!=PCI_BAR0_WIN)
++ break;
++ if (osl_pci_read_config(loc,offset,size) == val)
++ break;
++ } while (retry--);
+
-+ /* wait for the last transaction to complete */
-+ OSL_DELAY(300);
+}
+
+void
-+dma_rxreset(dma_info_t *di)
++osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
+{
-+ uint32 status;
++ ASSERT(0);
++}
+
-+ DMA_TRACE(("%s: dma_rxreset\n", di->name));
++void
++osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
++{
++ ASSERT(0);
++}
+
-+ W_REG(&di->regs->rcvcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
-+ 10000);
++void
++osl_assert(char *exp, char *file, int line)
++{
++ char tempbuf[255];
+
-+ if (status != RS_RS_DISABLED) {
-+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
-+ }
++ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
++ panic(tempbuf);
+}
+
-+void
-+dma_txinit(dma_info_t *di)
++/*
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++ */
++#ifdef BINOSL
++
++int
++osl_printf(const char *format, ...)
+{
-+ DMA_TRACE(("%s: dma_txinit\n", di->name));
++ va_list args;
++ char buf[1024];
++ int len;
+
-+ di->txin = di->txout = 0;
-+ di->txavail = di->ntxd - 1;
++ /* sprintf into a local buffer because there *is* no "vprintk()".. */
++ va_start(args, format);
++ len = vsprintf(buf, format, args);
++ va_end(args);
+
-+ /* clear tx descriptor ring */
-+ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
++ if (len > sizeof (buf)) {
++ printk("osl_printf: buffer overrun\n");
++ return (0);
++ }
+
-+ W_REG(&di->regs->xmtcontrol, XC_XE);
-+ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
++ return (printk(buf));
+}
+
-+bool
-+dma_txenabled(dma_info_t *di)
++int
++osl_sprintf(char *buf, const char *format, ...)
+{
-+ uint32 xc;
++ va_list args;
++ int rc;
+
-+ /* If the chip is dead, it is not enabled :-) */
-+ xc = R_REG(&di->regs->xmtcontrol);
-+ return ((xc != 0xffffffff) && (xc & XC_XE));
++ va_start(args, format);
++ rc = vsprintf(buf, format, args);
++ va_end(args);
++ return (rc);
+}
+
-+void
-+dma_txsuspend(dma_info_t *di)
++int
++osl_strcmp(const char *s1, const char *s2)
+{
-+ DMA_TRACE(("%s: dma_txsuspend\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_SE);
++ return (strcmp(s1, s2));
+}
+
-+void
-+dma_txresume(dma_info_t *di)
++int
++osl_strncmp(const char *s1, const char *s2, uint n)
+{
-+ DMA_TRACE(("%s: dma_txresume\n", di->name));
-+ AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++ return (strncmp(s1, s2, n));
+}
+
-+bool
-+dma_txsuspended(dma_info_t *di)
++int
++osl_strlen(char *s)
+{
-+ uint32 xc;
-+ uint32 xs;
++ return (strlen(s));
++}
+
-+ xc = R_REG(&di->regs->xmtcontrol);
-+ if (xc & XC_SE) {
-+ xs = R_REG(&di->regs->xmtstatus);
-+ return ((xs & XS_XS_MASK) == XS_XS_IDLE);
-+ }
-+ return 0;
++char*
++osl_strcpy(char *d, const char *s)
++{
++ return (strcpy(d, s));
+}
+
-+bool
-+dma_txstopped(dma_info_t *di)
++char*
++osl_strncpy(char *d, const char *s, uint n)
+{
-+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++ return (strncpy(d, s, n));
+}
+
-+bool
-+dma_rxstopped(dma_info_t *di)
++void
++bcopy(const void *src, void *dst, int len)
+{
-+ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++ memcpy(dst, src, len);
++}
++
++int
++bcmp(const void *b1, const void *b2, int len)
++{
++ return (memcmp(b1, b2, len));
+}
+
+void
-+dma_fifoloopbackenable(dma_info_t *di)
++bzero(void *b, int len)
+{
-+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_LE);
++ memset(b, '\0', len);
++}
++
++void*
++osl_malloc(uint size)
++{
++ return (kmalloc(size, GFP_ATOMIC));
+}
+
+void
-+dma_rxinit(dma_info_t *di)
++osl_mfree(void *addr, uint size)
+{
-+ DMA_TRACE(("%s: dma_rxinit\n", di->name));
++ kfree(addr);
++}
+
-+ di->rxin = di->rxout = 0;
++uint32
++osl_readl(volatile uint32 *r)
++{
++ return (readl(r));
++}
+
-+ /* clear rx descriptor ring */
-+ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
++uint16
++osl_readw(volatile uint16 *r)
++{
++ return (readw(r));
++}
+
-+ dma_rxenable(di);
-+ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++uint8
++osl_readb(volatile uint8 *r)
++{
++ return (readb(r));
+}
+
+void
-+dma_rxenable(dma_info_t *di)
++osl_writel(uint32 v, volatile uint32 *r)
+{
-+ DMA_TRACE(("%s: dma_rxenable\n", di->name));
-+ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
++ writel(v, r);
+}
+
-+bool
-+dma_rxenabled(dma_info_t *di)
++void
++osl_writew(uint16 v, volatile uint16 *r)
+{
-+ uint32 rc;
++ writew(v, r);
++}
+
-+ rc = R_REG(&di->regs->rcvcontrol);
-+ return ((rc != 0xffffffff) && (rc & RC_RE));
++void
++osl_writeb(uint8 v, volatile uint8 *r)
++{
++ writeb(v, r);
+}
+
-+/*
-+ * The BCM47XX family supports full 32bit dma engine buffer addressing so
-+ * dma buffers can cross 4 Kbyte page boundaries.
-+ */
-+int
-+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++void *
++osl_uncached(void *va)
+{
-+ void *p, *next;
-+ uchar *data;
-+ uint len;
-+ uint txout;
-+ uint32 ctrl;
-+ uint32 pa;
++#ifdef mips
++ return ((void*)KSEG1ADDR(va));
++#else
++ return ((void*)va);
++#endif
++}
+
-+ DMA_TRACE(("%s: dma_txfast\n", di->name));
++uint
++osl_getcycles(void)
++{
++ uint cycles;
+
-+ txout = di->txout;
-+ ctrl = 0;
++#if defined(mips)
++ cycles = read_c0_count() * 2;
++#elif defined(__i386__)
++ rdtscl(cycles);
++#else
++ cycles = 0;
++#endif
++ return cycles;
++}
+
-+ /*
-+ * Walk the chain of packet buffers
-+ * allocating and initializing transmit descriptor entries.
-+ */
-+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ len = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
++void *
++osl_reg_map(uint32 pa, uint size)
++{
++ return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
++}
+
-+ /* return nonzero if out of tx descriptors */
-+ if (NEXTTXD(txout) == di->txin)
-+ goto outoftxd;
++void
++osl_reg_unmap(void *va)
++{
++ iounmap(va);
++}
+
-+ if (len == 0)
-+ continue;
++int
++osl_busprobe(uint32 *val, uint32 addr)
++{
++#ifdef mips
++ return get_dbe(*val, (uint32*)addr);
++#else
++ *val = readl(addr);
++ return 0;
++#endif
++}
+
-+ /* get physical address of buffer start */
-+ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
++void*
++osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
++{
++ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
++}
+
-+ /* build the descriptor control value */
-+ ctrl = len & CTRL_BC_MASK;
++void
++osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
++{
++ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
++}
+
-+ ctrl |= coreflags;
-+
-+ if (p == p0)
-+ ctrl |= CTRL_SOF;
-+ if (next == NULL)
-+ ctrl |= (CTRL_IOC | CTRL_EOF);
-+ if (txout == (di->ntxd - 1))
-+ ctrl |= CTRL_EOT;
++uint
++osl_dma_map(void *dev, void *va, uint size, int direction)
++{
++ int dir;
+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++ return (pci_map_single(dev, va, size, dir));
++}
+
-+ ASSERT(di->txp[txout] == NULL);
++void
++osl_dma_unmap(void *dev, uint pa, uint size, int direction)
++{
++ int dir;
+
-+ txout = NEXTTXD(txout);
-+ }
++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++ pci_unmap_single(dev, (uint32)pa, size, dir);
++}
+
-+ /* if last txd eof not set, fix it */
-+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++void
++osl_delay(uint usec)
++{
++ udelay(usec);
++}
+
-+ /* save the packet */
-+ di->txp[PREVTXD(txout)] = p0;
++uchar*
++osl_pktdata(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->data);
++}
+
-+ /* bump the tx descriptor index */
-+ di->txout = txout;
++uint
++osl_pktlen(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->len);
++}
+
-+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
++void*
++osl_pktnext(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->next);
++}
+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++void
++osl_pktsetnext(void *skb, void *x)
++{
++ ((struct sk_buff*)skb)->next = (struct sk_buff*)x;
++}
+
-+ return (0);
++void
++osl_pktsetlen(void *drv, void *skb, uint len)
++{
++ __skb_trim((struct sk_buff*)skb, len);
++}
+
-+outoftxd:
-+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
-+ di->txavail = 0;
-+ di->hnddma.txnobuf++;
-+ return (-1);
++uchar*
++osl_pktpush(void *drv, void *skb, int bytes)
++{
++ return (skb_push((struct sk_buff*)skb, bytes));
+}
+
-+#define PAGESZ 4096
-+#define PAGEBASE(x) ((uint)(x) & ~4095)
++uchar*
++osl_pktpull(void *drv, void *skb, int bytes)
++{
++ return (skb_pull((struct sk_buff*)skb, bytes));
++}
+
-+/*
-+ * Just like above except go through the extra effort of splitting
-+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
-+ */
-+int
-+dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
++void*
++osl_pktdup(void *drv, void *skb)
+{
-+ void *p, *next;
-+ uchar *data;
-+ uint plen, len;
-+ uchar *page, *start, *end;
-+ uint txout;
-+ uint32 ctrl;
-+ uint32 pa;
-+
-+ DMA_TRACE(("%s: dma_tx\n", di->name));
-+
-+ txout = di->txout;
-+ ctrl = 0;
-+
-+ /*
-+ * Walk the chain of packet buffers
-+ * splitting those that cross 4 Kbyte boundaries
-+ * allocating and initializing transmit descriptor entries.
-+ */
-+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ plen = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
-+
-+ if (plen == 0)
-+ continue;
-+
-+ for (page = (uchar*)PAGEBASE(data);
-+ page <= (uchar*)PAGEBASE(data + plen - 1);
-+ page += PAGESZ) {
-+
-+ /* return nonzero if out of tx descriptors */
-+ if (NEXTTXD(txout) == di->txin)
-+ goto outoftxd;
-+
-+ start = (page == (uchar*)PAGEBASE(data))? data: page;
-+ end = (page == (uchar*)PAGEBASE(data + plen))?
-+ (data + plen): (page + PAGESZ);
-+ len = end - start;
-+
-+ /* build the descriptor control value */
-+ ctrl = len & CTRL_BC_MASK;
-+
-+ ctrl |= coreflags;
-+
-+ if ((p == p0) && (start == data))
-+ ctrl |= CTRL_SOF;
-+ if ((next == NULL) && (end == (data + plen)))
-+ ctrl |= (CTRL_IOC | CTRL_EOF);
-+ if (txout == (di->ntxd - 1))
-+ ctrl |= CTRL_EOT;
-+
-+ /* get physical address of buffer start */
-+ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
-+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
-+
-+ ASSERT(di->txp[txout] == NULL);
-+
-+ txout = NEXTTXD(txout);
-+ }
-+ }
-+
-+ /* if last txd eof not set, fix it */
-+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
-+
-+ /* save the packet */
-+ di->txp[PREVTXD(txout)] = p0;
-+
-+ /* bump the tx descriptor index */
-+ di->txout = txout;
-+
-+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
-+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+
-+ return (0);
-+
-+outoftxd:
-+ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
-+ di->txavail = 0;
-+ di->hnddma.txnobuf++;
-+ return (-1);
++ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
+}
+
-+/* returns a pointer to the next frame received, or NULL if there are no more */
+void*
-+dma_rx(dma_info_t *di)
++osl_pktcookie(void *skb)
+{
-+ void *p;
-+ uint len;
-+ int skiplen = 0;
-+
-+ while ((p = dma_getnextrxp(di, FALSE))) {
-+ /* skip giant packets which span multiple rx descriptors */
-+ if (skiplen > 0) {
-+ skiplen -= di->rxbufsize;
-+ if (skiplen < 0)
-+ skiplen = 0;
-+ PKTFREE(di->drv, p, FALSE);
-+ continue;
-+ }
-+
-+ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
-+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
-+
-+ /* bad frame length check */
-+ if (len > (di->rxbufsize - di->rxoffset)) {
-+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
-+ if (len > 0)
-+ skiplen = len - (di->rxbufsize - di->rxoffset);
-+ PKTFREE(di->drv, p, FALSE);
-+ di->hnddma.rxgiants++;
-+ continue;
-+ }
-+
-+ /* set actual length */
-+ PKTSETLEN(di->drv, p, (di->rxoffset + len));
-+
-+ break;
-+ }
-+
-+ return (p);
++ return ((void*)((struct sk_buff*)skb)->csum);
+}
+
-+/* post receive buffers */
+void
-+dma_rxfill(dma_info_t *di)
++osl_pktsetcookie(void *skb, void *x)
+{
-+ void *p;
-+ uint rxin, rxout;
-+ uint ctrl;
-+ uint n;
-+ uint i;
-+ uint32 pa;
-+ uint rxbufsize;
-+
-+ /*
-+ * Determine how many receive buffers we're lacking
-+ * from the full complement, allocate, initialize,
-+ * and post them, then update the chip rx lastdscr.
-+ */
-+
-+ rxin = di->rxin;
-+ rxout = di->rxout;
-+ rxbufsize = di->rxbufsize;
-+
-+ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
-+
-+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
-+
-+ for (i = 0; i < n; i++) {
-+ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
-+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
-+ di->hnddma.rxnobuf++;
-+ break;
-+ }
-+
-+ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
-+
-+ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
-+ ASSERT(ISALIGNED(pa, 4));
-+
-+ /* save the free packet pointer */
-+ ASSERT(di->rxp[rxout] == NULL);
-+ di->rxp[rxout] = p;
-+
-+ /* prep the descriptor control value */
-+ ctrl = rxbufsize;
-+ if (rxout == (di->nrxd - 1))
-+ ctrl |= CTRL_EOT;
-+
-+ /* init the rx descriptor */
-+ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
-+
-+ rxout = NEXTRXD(rxout);
-+ }
-+
-+ di->rxout = rxout;
++ ((struct sk_buff*)skb)->csum = (uint)x;
++}
+
-+ /* update the chip lastdscr pointer */
-+ W_REG(&di->regs->rcvptr, I2B(rxout));
++void*
++osl_pktlink(void *skb)
++{
++ return (((struct sk_buff*)skb)->prev);
+}
+
+void
-+dma_txreclaim(dma_info_t *di, bool forceall)
++osl_pktsetlink(void *skb, void *x)
+{
-+ void *p;
-+
-+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
-+
-+ while ((p = dma_getnexttxp(di, forceall)))
-+ PKTFREE(di->drv, p, TRUE);
++ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
+}
+
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200
+@@ -0,0 +1,950 @@
+/*
-+ * Reclaim next completed txd (txds if using chained buffers) and
-+ * return associated packet.
-+ * If 'force' is true, reclaim txd(s) and return associated packet
-+ * regardless of the value of the hardware "curr" pointer.
++ * BCM47XX Sonics SiliconBackplane MIPS core routines
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
+ */
-+void*
-+dma_getnexttxp(dma_info_t *di, bool forceall)
-+{
-+ uint start, end, i;
-+ void *txp;
+
-+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
++#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++#include <bcmutils.h>
++#include <hndmips.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbchipc.h>
++#include <sbmemc.h>
+
-+ txp = NULL;
++/*
++ * Memory segments (32bit kernel mode addresses)
++ */
++#undef KUSEG
++#undef KSEG0
++#undef KSEG1
++#undef KSEG2
++#undef KSEG3
++#define KUSEG 0x00000000
++#define KSEG0 0x80000000
++#define KSEG1 0xa0000000
++#define KSEG2 0xc0000000
++#define KSEG3 0xe0000000
+
-+ start = di->txin;
-+ if (forceall)
-+ end = di->txout;
-+ else
-+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
-+
-+ if ((start == 0) && (end > di->txout))
-+ goto bogus;
-+
-+ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
-+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
-+ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
-+ W_SM(&di->txd[i].addr, 0xdeadbeef);
-+ txp = di->txp[i];
-+ di->txp[i] = NULL;
-+ }
++/*
++ * Map an address to a certain kernel segment
++ */
++#undef KSEG0ADDR
++#undef KSEG1ADDR
++#undef KSEG2ADDR
++#undef KSEG3ADDR
++#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
++#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
++#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
++#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
+
-+ di->txin = i;
++/*
++ * The following macros are especially useful for __asm__
++ * inline assembler.
++ */
++#ifndef __STR
++#define __STR(x) #x
++#endif
++#ifndef STR
++#define STR(x) __STR(x)
++#endif
+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++/* *********************************************************************
++ * CP0 Registers
++ ********************************************************************* */
+
-+ return (txp);
++#define C0_INX 0 /* CP0: TLB Index */
++#define C0_RAND 1 /* CP0: TLB Random */
++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
++#define C0_CTEXT 4 /* CP0: Context */
++#define C0_PGMASK 5 /* CP0: TLB PageMask */
++#define C0_WIRED 6 /* CP0: TLB Wired */
++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
++#define C0_COUNT 9 /* CP0: Count */
++#define C0_TLBHI 10 /* CP0: TLB EntryHi */
++#define C0_COMPARE 11 /* CP0: Compare */
++#define C0_SR 12 /* CP0: Processor Status */
++#define C0_STATUS C0_SR /* CP0: Processor Status */
++#define C0_CAUSE 13 /* CP0: Exception Cause */
++#define C0_EPC 14 /* CP0: Exception PC */
++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
++#define C0_CONFIG 16 /* CP0: Config */
++#define C0_LLADDR 17 /* CP0: LLAddr */
++#define C0_WATCHLO 18 /* CP0: WatchpointLo */
++#define C0_WATCHHI 19 /* CP0: WatchpointHi */
++#define C0_XCTEXT 20 /* CP0: XContext */
++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
++#define C0_ECC 26 /* CP0: ECC */
++#define C0_CACHEERR 27 /* CP0: CacheErr */
++#define C0_TAGLO 28 /* CP0: TagLo */
++#define C0_TAGHI 29 /* CP0: TagHi */
++#define C0_ERREPC 30 /* CP0: ErrorEPC */
+
-+bogus:
+/*
-+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
-+ start, end, di->txout, forceall));
-+*/
-+ return (NULL);
-+}
++ * Macros to access the system control coprocessor
++ */
+
-+void
-+dma_rxreclaim(dma_info_t *di)
-+{
-+ void *p;
++#define MFC0(source, sel) \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
++ "move\t%0,$1\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res) \
++ : \
++ :"$1"); \
++ __res; \
++})
+
-+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
++#define MTC0(source, sel, value) \
++do { \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "move\t$1,%z0\n\t" \
++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ : \
++ :"Jr" (value) \
++ :"$1"); \
++} while (0)
+
-+ while ((p = dma_getnextrxp(di, TRUE)))
-+ PKTFREE(di->drv, p, FALSE);
-+}
++/*
++ * R4x00 interrupt enable / cause bits
++ */
++#undef IE_SW0
++#undef IE_SW1
++#undef IE_IRQ0
++#undef IE_IRQ1
++#undef IE_IRQ2
++#undef IE_IRQ3
++#undef IE_IRQ4
++#undef IE_IRQ5
++#define IE_SW0 (1<< 8)
++#define IE_SW1 (1<< 9)
++#define IE_IRQ0 (1<<10)
++#define IE_IRQ1 (1<<11)
++#define IE_IRQ2 (1<<12)
++#define IE_IRQ3 (1<<13)
++#define IE_IRQ4 (1<<14)
++#define IE_IRQ5 (1<<15)
+
-+void *
-+dma_getnextrxp(dma_info_t *di, bool forceall)
-+{
-+ uint i;
-+ void *rxp;
++/*
++ * Bitfields in the R4xx0 cp0 status register
++ */
++#define ST0_IE 0x00000001
++#define ST0_EXL 0x00000002
++#define ST0_ERL 0x00000004
++#define ST0_KSU 0x00000018
++# define KSU_USER 0x00000010
++# define KSU_SUPERVISOR 0x00000008
++# define KSU_KERNEL 0x00000000
++#define ST0_UX 0x00000020
++#define ST0_SX 0x00000040
++#define ST0_KX 0x00000080
++#define ST0_DE 0x00010000
++#define ST0_CE 0x00020000
+
-+ /* if forcing, dma engine must be disabled */
-+ ASSERT(!forceall || !dma_rxenabled(di));
++/*
++ * Status register bits available in all MIPS CPUs.
++ */
++#define ST0_IM 0x0000ff00
++#define ST0_CH 0x00040000
++#define ST0_SR 0x00100000
++#define ST0_TS 0x00200000
++#define ST0_BEV 0x00400000
++#define ST0_RE 0x02000000
++#define ST0_FR 0x04000000
++#define ST0_CU 0xf0000000
++#define ST0_CU0 0x10000000
++#define ST0_CU1 0x20000000
++#define ST0_CU2 0x40000000
++#define ST0_CU3 0x80000000
++#define ST0_XX 0x80000000 /* MIPS IV naming */
+
-+ i = di->rxin;
++/*
++ * Cache Operations
++ */
+
-+ /* return if no packets posted */
-+ if (i == di->rxout)
-+ return (NULL);
++#ifndef Fill_I
++#define Fill_I 0x14
++#endif
+
-+ /* ignore curr if forceall */
-+ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
-+ return (NULL);
++#define cache_unroll(base,op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, (%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
+
-+ /* get the packet pointer that corresponds to the rx descriptor */
-+ rxp = di->rxp[i];
-+ ASSERT(rxp);
-+ di->rxp[i] = NULL;
++/*
++ * These are the UART port assignments, expressed as offsets from the base
++ * register. These assignments should hold for any serial port based on
++ * a 8250, 16450, or 16550(A).
++ */
+
-+ /* clear this packet from the descriptor ring */
-+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
-+ di->rxbufsize, DMA_RX, rxp);
-+ W_SM(&di->rxd[i].addr, 0xdeadbeef);
++#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+
-+ di->rxin = NEXTRXD(i);
++/*
++ * Returns TRUE if an external UART exists at the given base
++ * register.
++ */
++static bool
++serial_exists(uint8 *regs)
++{
++ uint8 save_mcr, status1;
+
-+ return (rxp);
-+}
++ save_mcr = R_REG(®s[UART_MCR]);
++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a);
++ status1 = R_REG(®s[UART_MSR]) & 0xf0;
++ W_REG(®s[UART_MCR], save_mcr);
+
-+char*
-+dma_dumptx(dma_info_t *di, char *buf)
-+{
-+ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
-+ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
-+ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
-+ R_REG(&di->regs->xmtcontrol),
-+ R_REG(&di->regs->xmtaddr),
-+ R_REG(&di->regs->xmtptr),
-+ R_REG(&di->regs->xmtstatus));
-+ return (buf);
++ return (status1 == 0x90);
+}
+
-+char*
-+dma_dumprx(dma_info_t *di, char *buf)
++/*
++ * Initializes UART access. The callback function will be called once
++ * per found UART.
++*/
++void
++sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
+{
-+ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
-+ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
-+ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
-+ R_REG(&di->regs->rcvcontrol),
-+ R_REG(&di->regs->rcvaddr),
-+ R_REG(&di->regs->rcvptr),
-+ R_REG(&di->regs->rcvstatus));
-+ return (buf);
-+}
-+
-+char*
-+dma_dump(dma_info_t *di, char *buf)
-+{
-+ buf = dma_dumptx(di, buf);
-+ buf = dma_dumprx(di, buf);
-+ return (buf);
-+}
-+
-+uint
-+dma_getvar(dma_info_t *di, char *name)
-+{
-+ if (!strcmp(name, "&txavail"))
-+ return ((uint) &di->txavail);
-+ else {
-+ ASSERT(0);
-+ }
-+ return (0);
-+}
-+
-+void
-+dma_txblock(dma_info_t *di)
-+{
-+ di->txavail = 0;
-+}
-+
-+void
-+dma_txunblock(dma_info_t *di)
-+{
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+}
++ void *regs;
++ ulong base;
++ uint irq;
++ int i, n;
+
-+uint
-+dma_txactive(dma_info_t *di)
-+{
-+ return (NTXDACTIVE(di->txin, di->txout));
-+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200
-@@ -0,0 +1,420 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
-+ */
++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
++ extifregs_t *eir = (extifregs_t *) regs;
++ sbconfig_t *sb;
+
-+#define LINUX_OSL
++ /* Determine external UART register base */
++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <linuxver.h>
-+#include <linux_osl.h>
-+#include <bcmutils.h>
-+#include <linux/delay.h>
-+#ifdef mips
-+#include <asm/paccess.h>
-+#endif
-+#include <pcicfg.h>
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
+
-+#define PCI_CFG_RETRY 10
++ /* Disable GPIO interrupt initially */
++ W_REG(&eir->gpiointpolarity, 0);
++ W_REG(&eir->gpiointmask, 0);
+
-+void*
-+osl_pktget(void *drv, uint len, bool send)
-+{
-+ struct sk_buff *skb;
++ /* Search for external UARTs */
++ n = 2;
++ for (i = 0; i < 2; i++) {
++ regs = (void *) REG_MAP(base + (i * 8), 8);
++ if (serial_exists(regs)) {
++ /* Set GPIO 1 to be the external UART IRQ */
++ W_REG(&eir->gpiointmask, 2);
++ if (add)
++ add(regs, irq, 13500000, 0);
++ }
++ }
+
-+ if ((skb = dev_alloc_skb(len)) == NULL)
-+ return (NULL);
++ /* Add internal UART if enabled */
++ if (R_REG(&eir->corecontrol) & CC_UE)
++ if (add)
++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
++ chipcregs_t *cc = (chipcregs_t *) regs;
++ uint32 rev, cap, pll, baud_base, div;
+
-+ skb_put(skb, len);
++ /* Determine core revision and capabilities */
++ rev = sb_corerev(sbh);
++ cap = R_REG(&cc->capabilities);
++ pll = cap & CAP_PLL_MASK;
+
-+ /* ensure the cookie field is cleared */
-+ PKTSETCOOKIE(skb, NULL);
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
+
-+ return ((void*) skb);
-+}
++ if (pll == PLL_TYPE1) {
++ /* PLL clock */
++ baud_base = sb_clock_rate(pll,
++ R_REG(&cc->clockcontrol_n),
++ R_REG(&cc->clockcontrol_m2));
++ div = 1;
++ } else if (rev >= 3) {
++ /* Internal backplane clock */
++ baud_base = sb_clock_rate(pll,
++ R_REG(&cc->clockcontrol_n),
++ R_REG(&cc->clockcontrol_sb));
++ div = 2; /* Minimum divisor */
++ W_REG(&cc->uart_clkdiv, div);
++ } else {
++ /* Fixed internal backplane clock */
++ baud_base = 88000000;
++ div = 48;
++ }
+
-+void
-+osl_pktfree(void *p)
-+{
-+ struct sk_buff *skb, *nskb;
++ /* Clock source depends on strapping if UartClkOverride is unset */
++ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
++ /* Internal divided backplane clock */
++ baud_base /= div;
++ } else {
++ /* Assume external clock of 1.8432 MHz */
++ baud_base = 1843200;
++ }
++ }
+
-+ skb = (struct sk_buff*) p;
++ /* Add internal UARTs */
++ n = cap & CAP_UARTS_MASK;
++ for (i = 0; i < n; i++) {
++ /* Register offset changed after revision 0 */
++ if (rev)
++ regs = (void *)((ulong) &cc->uart0data + (i * 256));
++ else
++ regs = (void *)((ulong) &cc->uart0data + (i * 8));
+
-+ /* perversion: we use skb->next to chain multi-skb packets */
-+ while (skb) {
-+ nskb = skb->next;
-+ skb->next = NULL;
-+ if (skb->destructor) {
-+ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
-+ dev_kfree_skb_any(skb);
-+ } else {
-+ /* can free immediately (even in_irq()) if destructor does not exist */
-+ dev_kfree_skb(skb);
++ if (add)
++ add(regs, irq, baud_base, 0);
+ }
-+ skb = nskb;
+ }
+}
+
++/* Returns the SB interrupt flag of the current core. */
+uint32
-+osl_pci_read_config(void *loc, uint offset, uint size)
++sb_flag(void *sbh)
+{
-+ struct pci_dev *pdev;
-+ uint val;
-+ uint retry=PCI_CFG_RETRY;
++ void *regs;
++ sbconfig_t *sb;
+
-+ /* only 4byte access supported */
-+ ASSERT(size == 4);
++ regs = sb_coreregs(sbh);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ pdev = (struct pci_dev*)loc;
-+ do {
-+ pci_read_config_dword(pdev, offset, &val);
-+ if (val != 0xffffffff)
-+ break;
-+ } while (retry--);
++ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
++}
+
++static const uint32 sbips_int_mask[] = {
++ 0,
++ SBIPS_INT1_MASK,
++ SBIPS_INT2_MASK,
++ SBIPS_INT3_MASK,
++ SBIPS_INT4_MASK
++};
+
-+ return (val);
-+}
++static const uint32 sbips_int_shift[] = {
++ 0,
++ 0,
++ SBIPS_INT2_SHIFT,
++ SBIPS_INT3_SHIFT,
++ SBIPS_INT4_SHIFT
++};
+
-+void
-+osl_pci_write_config(void *loc, uint offset, uint size, uint val)
++/*
++ * Returns the MIPS IRQ assignment of the current core. If unassigned,
++ * 0 is returned.
++ */
++uint
++sb_irq(void *sbh)
+{
-+ struct pci_dev *pdev;
-+ uint retry=PCI_CFG_RETRY;
++ uint idx;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag, sbipsflag;
++ uint irq = 0;
+
-+ /* only 4byte access supported */
-+ ASSERT(size == 4);
++ flag = sb_flag(sbh);
+
-+ pdev = (struct pci_dev*)loc;
++ idx = sb_coreidx(sbh);
+
-+ do {
-+ pci_write_config_dword(pdev, offset, val);
-+ if (offset!=PCI_BAR0_WIN)
-+ break;
-+ if (osl_pci_read_config(loc,offset,size) == val)
-+ break;
-+ } while (retry--);
++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+}
++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
++ sbipsflag = R_REG(&sb->sbipsflag);
++ for (irq = 1; irq <= 4; irq++) {
++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
++ break;
++ }
++ if (irq == 5)
++ irq = 0;
++ }
+
-+void
-+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
-+{
-+ ASSERT(0);
++ sb_setcoreidx(sbh, idx);
++
++ return irq;
+}
+
-+void
-+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
-+{
-+ ASSERT(0);
-+}
-+
-+void
-+osl_assert(char *exp, char *file, int line)
++/* Clears the specified MIPS IRQ. */
++static void
++sb_clearirq(void *sbh, uint irq)
+{
-+ char tempbuf[255];
++ void *regs;
++ sbconfig_t *sb;
+
-+ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
-+ panic(tempbuf);
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++
++ if (irq == 0)
++ W_REG(&sb->sbintvec, 0);
++ else
++ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
+}
+
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++/*
++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
++ * IRQ 0 may be assigned more than once.
+ */
-+#ifdef BINOSL
-+
-+int
-+osl_printf(const char *format, ...)
++static void
++sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
+{
-+ va_list args;
-+ char buf[1024];
-+ int len;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag;
+
-+ /* sprintf into a local buffer because there *is* no "vprintk()".. */
-+ va_start(args, format);
-+ len = vsprintf(buf, format, args);
-+ va_end(args);
++ regs = sb_setcore(sbh, coreid, coreunit);
++ ASSERT(regs);
++ flag = sb_flag(sbh);
+
-+ if (len > sizeof (buf)) {
-+ printk("osl_printf: buffer overrun\n");
-+ return (0);
-+ }
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ return (printk(buf));
-+}
++ if (irq == 0)
++ OR_REG(&sb->sbintvec, 1 << flag);
++ else {
++ flag <<= sbips_int_shift[irq];
++ ASSERT(!(flag & ~sbips_int_mask[irq]));
++ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
++ W_REG(&sb->sbipsflag, flag);
++ }
++}
+
-+int
-+osl_sprintf(char *buf, const char *format, ...)
++/*
++ * Initializes clocks and interrupts. SB and NVRAM access must be
++ * initialized prior to calling.
++ */
++void
++sb_mips_init(void *sbh)
+{
-+ va_list args;
-+ int rc;
++ ulong hz, ns, tmp;
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ char *value;
++ uint irq;
+
-+ va_start(args, format);
-+ rc = vsprintf(buf, format, args);
-+ va_end(args);
-+ return (rc);
-+}
++ /* Figure out current SB clock speed */
++ if ((hz = sb_clock(sbh)) == 0)
++ hz = 100000000;
++ ns = 1000000000 / hz;
+
-+int
-+osl_strcmp(const char *s1, const char *s2)
-+{
-+ return (strcmp(s1, s2));
-+}
++ /* Setup external interface timing */
++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
++ /* Initialize extif so we can get to the LEDs and external UART */
++ W_REG(&eir->prog_config, CF_EN);
+
-+int
-+osl_strncmp(const char *s1, const char *s2, uint n)
-+{
-+ return (strncmp(s1, s2, n));
-+}
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
+
-+int
-+osl_strlen(char *s)
-+{
-+ return (strlen(s));
-+}
++ /* Set programmable interface timing for external uart */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
++ tmp |= CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&cc->parallelflashwaitcnt, tmp);
+
-+char*
-+osl_strcpy(char *d, const char *s)
-+{
-+ return (strcpy(d, s));
-+}
++ W_REG(&cc->cs01memwaitcnt, tmp);
++ }
+
-+char*
-+osl_strncpy(char *d, const char *s, uint n)
-+{
-+ return (strncpy(d, s, n));
++ /* Chip specific initialization */
++ switch (sb_chip(sbh)) {
++ case BCM4710_DEVICE_ID:
++ /* Clear interrupt map */
++ for (irq = 0; irq <= 4; irq++)
++ sb_clearirq(sbh, irq);
++ sb_setirq(sbh, 0, SB_CODEC, 0);
++ sb_setirq(sbh, 0, SB_EXTIF, 0);
++ sb_setirq(sbh, 2, SB_ENET, 1);
++ sb_setirq(sbh, 3, SB_ILINE20, 0);
++ sb_setirq(sbh, 4, SB_PCI, 0);
++ ASSERT(eir);
++ value = nvram_get("et0phyaddr");
++ if (value && !strcmp(value, "31")) {
++ /* Enable internal UART */
++ W_REG(&eir->corecontrol, CC_UE);
++ /* Give USB its own interrupt */
++ sb_setirq(sbh, 1, SB_USB, 0);
++ } else {
++ /* Disable internal UART */
++ W_REG(&eir->corecontrol, 0);
++ /* Give Ethernet its own interrupt */
++ sb_setirq(sbh, 1, SB_ENET, 0);
++ sb_setirq(sbh, 0, SB_USB, 0);
++ }
++ break;
++ case BCM4310_DEVICE_ID:
++ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
++ break;
++ }
+}
+
-+void
-+bcopy(const void *src, void *dst, int len)
++uint32
++sb_mips_clock(void *sbh)
+{
-+ memcpy(dst, src, len);
-+}
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ uint32 n, m;
++ uint idx;
++ uint32 pll_type, rate = 0;
+
-+int
-+bcmp(const void *b1, const void *b2, int len)
-+{
-+ return (memcmp(b1, b2, len));
-+}
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
++ pll_type = PLL_TYPE1;
+
-+void
-+bzero(void *b, int len)
-+{
-+ memset(b, '\0', len);
-+}
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ n = R_REG(&eir->clockcontrol_n);
++ m = R_REG(&eir->clockcontrol_sb);
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++ n = R_REG(&cc->clockcontrol_n);
++ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
++ m = R_REG(&cc->clockcontrol_mips);
++ else if (pll_type == PLL_TYPE3) {
++ rate = 200000000;
++ goto out;
++ } else
++ m = R_REG(&cc->clockcontrol_sb);
++ } else
++ goto out;
+
-+void*
-+osl_malloc(uint size)
-+{
-+ return (kmalloc(size, GFP_ATOMIC));
-+}
++ /* calculate rate */
++ rate = sb_clock_rate(pll_type, n, m);
+
-+void
-+osl_mfree(void *addr, uint size)
-+{
-+ kfree(addr);
-+}
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
+
-+uint32
-+osl_readl(volatile uint32 *r)
-+{
-+ return (readl(r));
++ return rate;
+}
+
-+uint16
-+osl_readw(volatile uint16 *r)
++static void
++icache_probe(int *size, int *lsize)
+{
-+ return (readw(r));
-+}
++ uint32 config1;
++ uint sets, ways;
+
-+uint8
-+osl_readb(volatile uint8 *r)
-+{
-+ return (readb(r));
-+}
++ config1 = MFC0(C0_CONFIG, 1);
+
-+void
-+osl_writel(uint32 v, volatile uint32 *r)
-+{
-+ writel(v, r);
++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((*lsize = ((config1 >> 19) & 7)))
++ *lsize = 2 << *lsize;
++ sets = 64 << ((config1 >> 22) & 7);
++ ways = 1 + ((config1 >> 16) & 7);
++ *size = *lsize * sets * ways;
+}
+
-+void
-+osl_writew(uint16 v, volatile uint16 *r)
-+{
-+ writew(v, r);
-+}
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+
-+void
-+osl_writeb(uint8 v, volatile uint8 *r)
++static void
++handler(void)
+{
-+ writeb(v, r);
++ /* Step 11 */
++ __asm__ (
++ ".set\tmips32\n\t"
++ "ssnop\n\t"
++ "ssnop\n\t"
++ /* Disable interrupts */
++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
++ "mfc0 $15, $12\n\t"
++ "and $15, $15, -31746\n\t"
++ "mtc0 $15, $12\n\t"
++ "eret\n\t"
++ "nop\n\t"
++ "nop\n\t"
++ ".set\tmips0"
++ );
+}
+
-+void *
-+osl_uncached(void *va)
++/* The following MUST come right after handler() */
++static void
++afterhandler(void)
+{
-+#ifdef mips
-+ return ((void*)KSEG1ADDR(va));
-+#else
-+ return ((void*)va);
-+#endif
+}
+
-+uint
-+osl_getcycles(void)
++/*
++ * Set the MIPS, backplane and PCI clocks as closely as possible.
++ */
++bool
++sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
+{
-+ uint cycles;
-+
-+#if defined(mips)
-+ cycles = read_c0_count() * 2;
-+#elif defined(__i386__)
-+ rdtscl(cycles);
-+#else
-+ cycles = 0;
-+#endif
-+ return cycles;
-+}
++ extifregs_t *eir = NULL;
++ chipcregs_t *cc = NULL;
++ mipsregs_t *mipsr = NULL;
++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
++ uint32 pll_type, sync_mode;
++ uint idx, i;
++ struct {
++ uint32 mipsclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 pci25;
++ } type1_table[] = {
++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */
++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
++ };
++ typedef struct {
++ uint32 mipsclock;
++ uint32 sbclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 m2;
++ uint32 m3;
++ uint32 ratio;
++ uint32 ratio_parm;
++ } n4m_table_t;
+
-+void *
-+osl_reg_map(uint32 pa, uint size)
-+{
-+ return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
-+}
++ n4m_table_t type2_table[] = {
++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
++ };
+
-+void
-+osl_reg_unmap(void *va)
-+{
-+ iounmap(va);
-+}
++ n4m_table_t type4_table[] = {
++ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
++ };
++ uint icache_size, ic_lsize;
++ ulong start, end, dst;
++ bool ret = FALSE;
+
-+int
-+osl_busprobe(uint32 *val, uint32 addr)
-+{
-+#ifdef mips
-+ return get_dbe(*val, (uint32*)addr);
-+#else
-+ *val = readl(addr);
-+ return 0;
-+#endif
-+}
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
+
-+void*
-+osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
-+{
-+ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
-+}
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ pll_type = PLL_TYPE1;
++ clockcontrol_n = &eir->clockcontrol_n;
++ clockcontrol_sb = &eir->clockcontrol_sb;
++ clockcontrol_pci = &eir->clockcontrol_pci;
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++ clockcontrol_n = &cc->clockcontrol_n;
++ clockcontrol_sb = &cc->clockcontrol_sb;
++ clockcontrol_pci = &cc->clockcontrol_pci;
++ } else
++ goto done;
+
-+void
-+osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
-+{
-+ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
-+}
++ /* Store the current clock register values */
++ orig_n = R_REG(clockcontrol_n);
++ orig_sb = R_REG(clockcontrol_sb);
++ orig_pci = R_REG(clockcontrol_pci);
+
-+uint
-+osl_dma_map(void *dev, void *va, uint size, int direction)
-+{
-+ int dir;
++ if (pll_type == PLL_TYPE1) {
++ /* Keep the current PCI clock if not specified */
++ if (pciclock == 0) {
++ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
++ }
+
-+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ return (pci_map_single(dev, va, size, dir));
-+}
++ /* Search for the closest MIPS clock less than or equal to a preferred value */
++ for (i = 0; i < ARRAYSIZE(type1_table); i++) {
++ ASSERT(type1_table[i].mipsclock ==
++ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
++ if (type1_table[i].mipsclock > mipsclock)
++ break;
++ }
++ if (i == 0) {
++ ret = FALSE;
++ goto done;
++ } else {
++ ret = TRUE;
++ i--;
++ }
++ ASSERT(type1_table[i].mipsclock <= mipsclock);
+
-+void
-+osl_dma_unmap(void *dev, uint pa, uint size, int direction)
-+{
-+ int dir;
++ /* No PLL change */
++ if ((orig_n == type1_table[i].n) &&
++ (orig_sb == type1_table[i].sb) &&
++ (orig_pci == type1_table[i].pci33))
++ goto done;
+
-+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ pci_unmap_single(dev, (uint32)pa, size, dir);
-+}
++ /* Set the PLL controls */
++ W_REG(clockcontrol_n, type1_table[i].n);
++ W_REG(clockcontrol_sb, type1_table[i].sb);
++ if (pciclock == 25000000)
++ W_REG(clockcontrol_pci, type1_table[i].pci25);
++ else
++ W_REG(clockcontrol_pci, type1_table[i].pci33);
+
-+void
-+osl_delay(uint usec)
-+{
-+ udelay(usec);
-+}
++ /* Reset */
++ sb_watchdog(sbh, 1);
++ while (1);
++ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
++ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
++ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
+
-+uchar*
-+osl_pktdata(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->data);
-+}
++ ASSERT(cc);
+
-+uint
-+osl_pktlen(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->len);
-+}
++ /* Store the current clock register values */
++ orig_m2 = R_REG(&cc->clockcontrol_m2);
++ orig_mips = R_REG(&cc->clockcontrol_mips);
++ orig_ratio_parm = 0;
+
-+void*
-+osl_pktnext(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->next);
-+}
++ /* Look up current ratio */
++ for (i = 0; i < tabsz; i++) {
++ if ((orig_n == table[i].n) &&
++ (orig_sb == table[i].sb) &&
++ (orig_pci == table[i].pci33) &&
++ (orig_m2 == table[i].m2) &&
++ (orig_mips == table[i].m3)) {
++ orig_ratio_parm = table[i].ratio_parm;
++ break;
++ }
++ }
+
-+void
-+osl_pktsetnext(void *skb, void *x)
-+{
-+ ((struct sk_buff*)skb)->next = (struct sk_buff*)x;
-+}
++ /* Search for the closest MIPS clock greater or equal to a preferred value */
++ for (i = 0; i < tabsz; i++) {
++ ASSERT(table[i].mipsclock ==
++ sb_clock_rate(pll_type, table[i].n, table[i].m3));
++ if ((mipsclock <= table[i].mipsclock) &&
++ ((sbclock == 0) || (sbclock <= table[i].sbclock)))
++ break;
++ }
++ if (i == tabsz) {
++ ret = FALSE;
++ goto done;
++ } else {
++ ret = TRUE;
++ }
+
-+void
-+osl_pktsetlen(void *drv, void *skb, uint len)
-+{
-+ __skb_trim((struct sk_buff*)skb, len);
-+}
++ /* No PLL change */
++ if ((orig_n == table[i].n) &&
++ (orig_sb == table[i].sb) &&
++ (orig_pci == table[i].pci33) &&
++ (orig_m2 == table[i].m2) &&
++ (orig_mips == table[i].m3))
++ goto done;
+
-+uchar*
-+osl_pktpush(void *drv, void *skb, int bytes)
-+{
-+ return (skb_push((struct sk_buff*)skb, bytes));
-+}
++ /* Set the PLL controls */
++ W_REG(clockcontrol_n, table[i].n);
++ W_REG(clockcontrol_sb, table[i].sb);
++ W_REG(clockcontrol_pci, table[i].pci33);
++ W_REG(&cc->clockcontrol_m2, table[i].m2);
++ W_REG(&cc->clockcontrol_mips, table[i].m3);
+
-+uchar*
-+osl_pktpull(void *drv, void *skb, int bytes)
-+{
-+ return (skb_pull((struct sk_buff*)skb, bytes));
-+}
++ /* No ratio change */
++ if (orig_ratio_parm == table[i].ratio_parm)
++ goto end_fill;
+
-+void*
-+osl_pktdup(void *drv, void *skb)
-+{
-+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
-+}
++ new_ratio = table[i].ratio_parm;
+
-+void*
-+osl_pktcookie(void *skb)
-+{
-+ return ((void*)((struct sk_buff*)skb)->csum);
-+}
++ icache_probe(&icache_size, &ic_lsize);
+
-+void
-+osl_pktsetcookie(void *skb, void *x)
-+{
-+ ((struct sk_buff*)skb)->csum = (uint)x;
-+}
++ /* Preload the code into the cache */
++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
++ while (start < end) {
++ cache_unroll(start, Fill_I);
++ start += ic_lsize;
++ }
+
-+void*
-+osl_pktlink(void *skb)
-+{
-+ return (((struct sk_buff*)skb)->prev);
++ /* Copy the handler */
++ start = (ulong) &handler;
++ end = (ulong) &afterhandler;
++ dst = KSEG1ADDR(0x180);
++ for (i = 0; i < (end - start); i += 4)
++ *((ulong *)(dst + i)) = *((ulong *)(start + i));
++
++ /* Preload handler into the cache one line at a time */
++ for (i = 0; i < (end - start); i += 4)
++ cache_unroll(dst + i, Fill_I);
++
++ /* Clear BEV bit */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
++
++ /* Enable interrupts */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
++
++ /* Enable MIPS timer interrupt */
++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(mipsr);
++ W_REG(&mipsr->intmask, 1);
++
++ start_fill:
++ /* step 1, set clock ratios */
++ MTC0(C0_BROADCOM, 3, new_ratio);
++ MTC0(C0_BROADCOM, 1, 8);
++
++ /* step 2: program timer intr */
++ W_REG(&mipsr->timer, 100);
++ (void) R_REG(&mipsr->timer);
++
++ /* step 3, switch to async */
++ sync_mode = MFC0(C0_BROADCOM, 4);
++ MTC0(C0_BROADCOM, 4, 1 << 22);
++
++ /* step 4, set cfg active */
++ MTC0(C0_BROADCOM, 2, 0x9);
++
++
++ /* steps 5 & 6 */
++ __asm__ __volatile__ (
++ ".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0"
++ );
++
++ /* step 7, clear cfg_active */
++ MTC0(C0_BROADCOM, 2, 0);
++
++ /* Additional Step: set back to orig sync mode */
++ MTC0(C0_BROADCOM, 4, sync_mode);
++
++ /* step 8, fake soft reset */
++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
++
++ end_fill:
++ /* step 9 set watchdog timer */
++ sb_watchdog(sbh, 20);
++ (void) R_REG(&cc->chipid);
++
++ /* step 11 */
++ __asm__ __volatile__ (
++ ".set\tmips3\n\t"
++ "sync\n\t"
++ "wait\n\t"
++ ".set\tmips0"
++ );
++ while (1);
++ }
++
++done:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return ret;
+}
+
-+void
-+osl_pktsetlink(void *skb, void *x)
++
++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
++uint32
++sb_memc_get_ncdl(void *sbh)
+{
-+ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
-+}
++ sbmemcregs_t *memc;
++ uint32 ret = 0;
++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
++ uint idx, rev;
+
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200
-@@ -0,0 +1,950 @@
++ idx = sb_coreidx(sbh);
++
++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
++ if (memc == 0)
++ goto out;
++
++ rev = sb_corerev(sbh);
++
++ config = R_REG(&memc->config);
++ wr = R_REG(&memc->wrncdlcor);
++ rd = R_REG(&memc->rdncdlcor);
++ misc = R_REG(&memc->miscdlyctl);
++ dqsg = R_REG(&memc->dqsgatencdl);
++
++ rd &= MEMC_RDNCDLCOR_RD_MASK;
++ wr &= MEMC_WRNCDLCOR_WR_MASK;
++ dqsg &= MEMC_DQSGATENCDL_G_MASK;
++
++ if (config & MEMC_CONFIG_DDR) {
++ ret = (wr << 16) | (rd << 8) | dqsg;
++ } else {
++ if (rev > 0)
++ cd = rd;
++ else
++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
++ ret = (sm << 16) | (sd << 8) | cd;
++ }
++
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return ret;
++}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200
+@@ -0,0 +1,530 @@
+/*
-+ * BCM47XX Sonics SiliconBackplane MIPS core routines
++ * Low-Level PCI and SB support for BCM47xx
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
+ */
+
+#include <typedefs.h>
++#include <pcicfg.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbpci.h>
+#include <osl.h>
++#include <bcmendian.h>
++#include <bcmutils.h>
+#include <sbutils.h>
-+#include <bcmdevs.h>
+#include <bcmnvram.h>
-+#include <bcmutils.h>
+#include <hndmips.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <sbmemc.h>
++
++/* Can free sbpci_init() memory after boot */
++#ifndef linux
++#define __init
++#endif
++
++/* Emulated configuration space */
++static pci_config_regs sb_config_regs[SB_MAXCORES];
++
++/* Banned cores */
++static uint16 pci_ban[32] = { 0 };
++static uint pci_banned = 0;
++
++/* CardBus mode */
++static bool cardbus = FALSE;
+
+/*
-+ * Memory segments (32bit kernel mode addresses)
++ * Functions for accessing external PCI configuration space
+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG 0x00000000
-+#define KSEG0 0x80000000
-+#define KSEG1 0xa0000000
-+#define KSEG2 0xc0000000
-+#define KSEG3 0xe0000000
-+
-+/*
-+ * Map an address to a certain kernel segment
-+ */
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
-+#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
-+#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
-+#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
-+
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
+
-+/* *********************************************************************
-+ * CP0 Registers
-+ ********************************************************************* */
++/* Assume one-hot slot wiring */
++#define PCI_SLOT_MAX 16
+
-+#define C0_INX 0 /* CP0: TLB Index */
-+#define C0_RAND 1 /* CP0: TLB Random */
-+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
-+#define C0_CTEXT 4 /* CP0: Context */
-+#define C0_PGMASK 5 /* CP0: TLB PageMask */
-+#define C0_WIRED 6 /* CP0: TLB Wired */
-+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
-+#define C0_COUNT 9 /* CP0: Count */
-+#define C0_TLBHI 10 /* CP0: TLB EntryHi */
-+#define C0_COMPARE 11 /* CP0: Compare */
-+#define C0_SR 12 /* CP0: Processor Status */
-+#define C0_STATUS C0_SR /* CP0: Processor Status */
-+#define C0_CAUSE 13 /* CP0: Exception Cause */
-+#define C0_EPC 14 /* CP0: Exception PC */
-+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG 16 /* CP0: Config */
-+#define C0_LLADDR 17 /* CP0: LLAddr */
-+#define C0_WATCHLO 18 /* CP0: WatchpointLo */
-+#define C0_WATCHHI 19 /* CP0: WatchpointHi */
-+#define C0_XCTEXT 20 /* CP0: XContext */
-+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
-+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
-+#define C0_ECC 26 /* CP0: ECC */
-+#define C0_CACHEERR 27 /* CP0: CacheErr */
-+#define C0_TAGLO 28 /* CP0: TagLo */
-+#define C0_TAGHI 29 /* CP0: TagHi */
-+#define C0_ERREPC 30 /* CP0: ErrorEPC */
++static uint32
++config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
++{
++ uint coreidx;
++ sbpciregs_t *regs;
++ uint32 addr = 0;
+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
++ /* CardBusMode supports only one device */
++ if (cardbus && dev > 1)
++ return 0;
+
-+#define MFC0(source, sel) \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
-+ "move\t%0,$1\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res) \
-+ : \
-+ :"$1"); \
-+ __res; \
-+})
++ coreidx = sb_coreidx(sbh);
++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
-+#define MTC0(source, sel, value) \
-+do { \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "move\t$1,%z0\n\t" \
-+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ : \
-+ :"Jr" (value) \
-+ :"$1"); \
-+} while (0)
++ /* Type 0 transaction */
++ if (bus == 1) {
++ /* Skip unwired slots */
++ if (dev < PCI_SLOT_MAX) {
++ /* Slide the PCI window to the appropriate slot */
++ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
++ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
++ (func << 8) | (off & ~3);
++ }
++ }
+
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#undef IE_SW0
-+#undef IE_SW1
-+#undef IE_IRQ0
-+#undef IE_IRQ1
-+#undef IE_IRQ2
-+#undef IE_IRQ3
-+#undef IE_IRQ4
-+#undef IE_IRQ5
-+#define IE_SW0 (1<< 8)
-+#define IE_SW1 (1<< 9)
-+#define IE_IRQ0 (1<<10)
-+#define IE_IRQ1 (1<<11)
-+#define IE_IRQ2 (1<<12)
-+#define IE_IRQ3 (1<<13)
-+#define IE_IRQ4 (1<<14)
-+#define IE_IRQ5 (1<<15)
++ /* Type 1 transaction */
++ else {
++ W_REG(®s->sbtopci1, SBTOPCI_CFG1);
++ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
++ }
+
-+/*
-+ * Bitfields in the R4xx0 cp0 status register
-+ */
-+#define ST0_IE 0x00000001
-+#define ST0_EXL 0x00000002
-+#define ST0_ERL 0x00000004
-+#define ST0_KSU 0x00000018
-+# define KSU_USER 0x00000010
-+# define KSU_SUPERVISOR 0x00000008
-+# define KSU_KERNEL 0x00000000
-+#define ST0_UX 0x00000020
-+#define ST0_SX 0x00000040
-+#define ST0_KX 0x00000080
-+#define ST0_DE 0x00010000
-+#define ST0_CE 0x00020000
++ sb_setcoreidx(sbh, coreidx);
+
-+/*
-+ * Status register bits available in all MIPS CPUs.
-+ */
-+#define ST0_IM 0x0000ff00
-+#define ST0_CH 0x00040000
-+#define ST0_SR 0x00100000
-+#define ST0_TS 0x00200000
-+#define ST0_BEV 0x00400000
-+#define ST0_RE 0x02000000
-+#define ST0_FR 0x04000000
-+#define ST0_CU 0xf0000000
-+#define ST0_CU0 0x10000000
-+#define ST0_CU1 0x20000000
-+#define ST0_CU2 0x40000000
-+#define ST0_CU3 0x80000000
-+#define ST0_XX 0x80000000 /* MIPS IV naming */
++ return addr;
++}
+
-+/*
-+ * Cache Operations
-+ */
++static int
++extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ uint32 addr, *reg = NULL, val;
++ int ret = 0;
+
-+#ifndef Fill_I
-+#define Fill_I 0x14
-+#endif
++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++ !(reg = (uint32 *) REG_MAP(addr, len)) ||
++ BUSPROBE(val, reg))
++ val = 0xffffffff;
+
-+#define cache_unroll(base,op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1, (%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
++ val >>= 8 * (off & 3);
++ if (len == 4)
++ *((uint32 *) buf) = val;
++ else if (len == 2)
++ *((uint16 *) buf) = (uint16) val;
++ else if (len == 1)
++ *((uint8 *) buf) = (uint8) val;
++ else
++ ret = -1;
+
-+/*
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register. These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
++ if (reg)
++ REG_UNMAP(reg);
+
-+#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
++ return ret;
++}
+
-+/*
-+ * Returns TRUE if an external UART exists at the given base
-+ * register.
-+ */
-+static bool
-+serial_exists(uint8 *regs)
++static int
++extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ uint8 save_mcr, status1;
++ uint32 addr, *reg = NULL, val;
++ int ret = 0;
+
-+ save_mcr = R_REG(®s[UART_MCR]);
-+ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a);
-+ status1 = R_REG(®s[UART_MSR]) & 0xf0;
-+ W_REG(®s[UART_MCR], save_mcr);
++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++ !(reg = (uint32 *) REG_MAP(addr, len)) ||
++ BUSPROBE(val, reg))
++ goto done;
+
-+ return (status1 == 0x90);
-+}
++ if (len == 4)
++ val = *((uint32 *) buf);
++ else if (len == 2) {
++ val &= ~(0xffff << (8 * (off & 3)));
++ val |= *((uint16 *) buf) << (8 * (off & 3));
++ } else if (len == 1) {
++ val &= ~(0xff << (8 * (off & 3)));
++ val |= *((uint8 *) buf) << (8 * (off & 3));
++ } else
++ ret = -1;
+
-+/*
-+ * Initializes UART access. The callback function will be called once
-+ * per found UART.
-+*/
-+void
-+sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
-+{
-+ void *regs;
-+ ulong base;
-+ uint irq;
-+ int i, n;
-+
-+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
-+ extifregs_t *eir = (extifregs_t *) regs;
-+ sbconfig_t *sb;
-+
-+ /* Determine external UART register base */
-+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
-+
-+ /* Determine IRQ */
-+ irq = sb_irq(sbh);
-+
-+ /* Disable GPIO interrupt initially */
-+ W_REG(&eir->gpiointpolarity, 0);
-+ W_REG(&eir->gpiointmask, 0);
-+
-+ /* Search for external UARTs */
-+ n = 2;
-+ for (i = 0; i < 2; i++) {
-+ regs = (void *) REG_MAP(base + (i * 8), 8);
-+ if (serial_exists(regs)) {
-+ /* Set GPIO 1 to be the external UART IRQ */
-+ W_REG(&eir->gpiointmask, 2);
-+ if (add)
-+ add(regs, irq, 13500000, 0);
-+ }
-+ }
-+
-+ /* Add internal UART if enabled */
-+ if (R_REG(&eir->corecontrol) & CC_UE)
-+ if (add)
-+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
-+ chipcregs_t *cc = (chipcregs_t *) regs;
-+ uint32 rev, cap, pll, baud_base, div;
-+
-+ /* Determine core revision and capabilities */
-+ rev = sb_corerev(sbh);
-+ cap = R_REG(&cc->capabilities);
-+ pll = cap & CAP_PLL_MASK;
-+
-+ /* Determine IRQ */
-+ irq = sb_irq(sbh);
-+
-+ if (pll == PLL_TYPE1) {
-+ /* PLL clock */
-+ baud_base = sb_clock_rate(pll,
-+ R_REG(&cc->clockcontrol_n),
-+ R_REG(&cc->clockcontrol_m2));
-+ div = 1;
-+ } else if (rev >= 3) {
-+ /* Internal backplane clock */
-+ baud_base = sb_clock_rate(pll,
-+ R_REG(&cc->clockcontrol_n),
-+ R_REG(&cc->clockcontrol_sb));
-+ div = 2; /* Minimum divisor */
-+ W_REG(&cc->uart_clkdiv, div);
-+ } else {
-+ /* Fixed internal backplane clock */
-+ baud_base = 88000000;
-+ div = 48;
-+ }
-+
-+ /* Clock source depends on strapping if UartClkOverride is unset */
-+ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+ /* Internal divided backplane clock */
-+ baud_base /= div;
-+ } else {
-+ /* Assume external clock of 1.8432 MHz */
-+ baud_base = 1843200;
-+ }
-+ }
++ W_REG(reg, val);
+
-+ /* Add internal UARTs */
-+ n = cap & CAP_UARTS_MASK;
-+ for (i = 0; i < n; i++) {
-+ /* Register offset changed after revision 0 */
-+ if (rev)
-+ regs = (void *)((ulong) &cc->uart0data + (i * 256));
-+ else
-+ regs = (void *)((ulong) &cc->uart0data + (i * 8));
++ done:
++ if (reg)
++ REG_UNMAP(reg);
+
-+ if (add)
-+ add(regs, irq, baud_base, 0);
-+ }
-+ }
++ return ret;
+}
+
-+/* Returns the SB interrupt flag of the current core. */
-+uint32
-+sb_flag(void *sbh)
++/*
++ * Functions for accessing translated SB configuration space
++ */
++
++static int
++sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ void *regs;
-+ sbconfig_t *sb;
++ pci_config_regs *cfg;
+
-+ regs = sb_coreregs(sbh);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = &sb_config_regs[dev];
+
-+ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
-+}
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED(buf, len));
+
-+static const uint32 sbips_int_mask[] = {
-+ 0,
-+ SBIPS_INT1_MASK,
-+ SBIPS_INT2_MASK,
-+ SBIPS_INT3_MASK,
-+ SBIPS_INT4_MASK
-+};
++ if (len == 4)
++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
++ else if (len == 2)
++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
++ else if (len == 1)
++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
++ else
++ return -1;
+
-+static const uint32 sbips_int_shift[] = {
-+ 0,
-+ 0,
-+ SBIPS_INT2_SHIFT,
-+ SBIPS_INT3_SHIFT,
-+ SBIPS_INT4_SHIFT
-+};
++ return 0;
++}
+
-+/*
-+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
-+ * 0 is returned.
-+ */
-+uint
-+sb_irq(void *sbh)
++static int
++sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ uint idx;
++ uint coreidx, n;
+ void *regs;
+ sbconfig_t *sb;
-+ uint32 flag, sbipsflag;
-+ uint irq = 0;
-+
-+ flag = sb_flag(sbh);
++ pci_config_regs *cfg;
+
-+ idx = sb_coreidx(sbh);
++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = &sb_config_regs[dev];
+
-+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED(buf, len));
+
-+ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
-+ sbipsflag = R_REG(&sb->sbipsflag);
-+ for (irq = 1; irq <= 4; irq++) {
-+ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
-+ break;
++ /* Emulate BAR sizing */
++ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
++ len == 4 && *((uint32 *) buf) == ~0) {
++ coreidx = sb_coreidx(sbh);
++ if ((regs = sb_setcoreidx(sbh, dev))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ /* Highest numbered address match register */
++ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
++ if (off == OFFSETOF(pci_config_regs, base[0]))
++ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
++ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
++ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
++ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
+ }
-+ if (irq == 5)
-+ irq = 0;
++ sb_setcoreidx(sbh, coreidx);
++ return 0;
+ }
+
-+ sb_setcoreidx(sbh, idx);
++ if (len == 4)
++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
++ else if (len == 2)
++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
++ else if (len == 1)
++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
++ else
++ return -1;
+
-+ return irq;
++ return 0;
+}
+
-+/* Clears the specified MIPS IRQ. */
-+static void
-+sb_clearirq(void *sbh, uint irq)
++int
++sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ void *regs;
-+ sbconfig_t *sb;
-+
-+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(regs);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+ if (irq == 0)
-+ W_REG(&sb->sbintvec, 0);
++ if (bus == 0)
++ return sb_read_config(sbh, bus, dev, func, off, buf, len);
+ else
-+ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
++ return extpci_read_config(sbh, bus, dev, func, off, buf, len);
+}
+
-+/*
-+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
-+ * IRQ 0 may be assigned more than once.
-+ */
-+static void
-+sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
++int
++sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ void *regs;
-+ sbconfig_t *sb;
-+ uint32 flag;
-+
-+ regs = sb_setcore(sbh, coreid, coreunit);
-+ ASSERT(regs);
-+ flag = sb_flag(sbh);
++ if (bus == 0)
++ return sb_write_config(sbh, bus, dev, func, off, buf, len);
++ else
++ return extpci_write_config(sbh, bus, dev, func, off, buf, len);
++}
+
-+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(regs);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++void
++sbpci_ban(uint16 core)
++{
++ if (pci_banned < ARRAYSIZE(pci_ban))
++ pci_ban[pci_banned++] = core;
++}
+
-+ if (irq == 0)
-+ OR_REG(&sb->sbintvec, 1 << flag);
-+ else {
-+ flag <<= sbips_int_shift[irq];
-+ ASSERT(!(flag & ~sbips_int_mask[irq]));
-+ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
-+ W_REG(&sb->sbipsflag, flag);
-+ }
-+}
-+
-+/*
-+ * Initializes clocks and interrupts. SB and NVRAM access must be
-+ * initialized prior to calling.
-+ */
-+void
-+sb_mips_init(void *sbh)
++int __init
++sbpci_init(void *sbh)
+{
-+ ulong hz, ns, tmp;
-+ extifregs_t *eir;
-+ chipcregs_t *cc;
-+ char *value;
-+ uint irq;
++ uint chip, chiprev, chippkg, coreidx, host, i;
++ sbpciregs_t *pci;
++ sbconfig_t *sb;
++ pci_config_regs *cfg;
++ void *regs;
++ char varname[8];
++ uint wlidx = 0;
++ uint16 vendor, core;
++ uint8 class, subclass, progif;
++ uint32 val;
++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
+
-+ /* Figure out current SB clock speed */
-+ if ((hz = sb_clock(sbh)) == 0)
-+ hz = 100000000;
-+ ns = 1000000000 / hz;
++ chip = sb_chip(sbh);
++ chiprev = sb_chiprev(sbh);
++ chippkg = sb_chippkg(sbh);
++ coreidx = sb_coreidx(sbh);
+
-+ /* Setup external interface timing */
-+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-+ /* Initialize extif so we can get to the LEDs and external UART */
-+ W_REG(&eir->prog_config, CF_EN);
++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
++ return -1;
++ sb_core_reset(sbh, 0);
+
-+ /* Set timing for the flash */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
++ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
++ host = 0;
++ else
++ host = !BUSPROBE(val, &pci->control);
+
-+ /* Set programmable interface timing for external uart */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
-+ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+ /* Set timing for the flash */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
-+ tmp |= CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&cc->parallelflashwaitcnt, tmp);
++ if (!host) {
++ /* Disable PCI interrupts in client mode */
++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
++ W_REG(&sb->sbintvec, 0);
+
-+ W_REG(&cc->cs01memwaitcnt, tmp);
-+ }
++ /* Disable the PCI bridge in client mode */
++ sbpci_ban(SB_PCI);
++ printf("PCI: Disabled\n");
++ } else {
++ /* Reset the external PCI bus and enable the clock */
++ W_REG(&pci->control, 0x5); /* enable the tristate drivers */
++ W_REG(&pci->control, 0xd); /* enable the PCI clock */
++ OSL_DELAY(100); /* delay 100 us */
++ W_REG(&pci->control, 0xf); /* deassert PCI reset */
++ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */
++ OSL_DELAY(1); /* delay 1 us */
+
-+ /* Chip specific initialization */
-+ switch (sb_chip(sbh)) {
-+ case BCM4710_DEVICE_ID:
-+ /* Clear interrupt map */
-+ for (irq = 0; irq <= 4; irq++)
-+ sb_clearirq(sbh, irq);
-+ sb_setirq(sbh, 0, SB_CODEC, 0);
-+ sb_setirq(sbh, 0, SB_EXTIF, 0);
-+ sb_setirq(sbh, 2, SB_ENET, 1);
-+ sb_setirq(sbh, 3, SB_ILINE20, 0);
-+ sb_setirq(sbh, 4, SB_PCI, 0);
-+ ASSERT(eir);
-+ value = nvram_get("et0phyaddr");
-+ if (value && !strcmp(value, "31")) {
-+ /* Enable internal UART */
-+ W_REG(&eir->corecontrol, CC_UE);
-+ /* Give USB its own interrupt */
-+ sb_setirq(sbh, 1, SB_USB, 0);
-+ } else {
-+ /* Disable internal UART */
-+ W_REG(&eir->corecontrol, 0);
-+ /* Give Ethernet its own interrupt */
-+ sb_setirq(sbh, 1, SB_ENET, 0);
-+ sb_setirq(sbh, 0, SB_USB, 0);
++ /* Enable CardBusMode */
++ cardbus = nvram_match("cardbus", "1");
++ if (cardbus) {
++ printf("PCI: Enabling CardBus\n");
++ /* GPIO 1 resets the CardBus device on bcm94710ap */
++ sb_gpioout(sbh, 1, 1);
++ sb_gpioouten(sbh, 1, 1);
++ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
+ }
-+ break;
-+ case BCM4310_DEVICE_ID:
-+ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
-+ break;
-+ }
-+}
-+
-+uint32
-+sb_mips_clock(void *sbh)
-+{
-+ extifregs_t *eir;
-+ chipcregs_t *cc;
-+ uint32 n, m;
-+ uint idx;
-+ uint32 pll_type, rate = 0;
-+
-+ /* get index of the current core */
-+ idx = sb_coreidx(sbh);
-+ pll_type = PLL_TYPE1;
-+
-+ /* switch to extif or chipc core */
-+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+ n = R_REG(&eir->clockcontrol_n);
-+ m = R_REG(&eir->clockcontrol_sb);
-+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+ n = R_REG(&cc->clockcontrol_n);
-+ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
-+ m = R_REG(&cc->clockcontrol_mips);
-+ else if (pll_type == PLL_TYPE3) {
-+ rate = 200000000;
-+ goto out;
-+ } else
-+ m = R_REG(&cc->clockcontrol_sb);
-+ } else
-+ goto out;
-+
-+ /* calculate rate */
-+ rate = sb_clock_rate(pll_type, n, m);
-+
-+out:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
+
-+ return rate;
-+}
++ /* 64 MB I/O access window */
++ W_REG(&pci->sbtopci0, SBTOPCI_IO);
++ /* 64 MB configuration access window */
++ W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
++ /* 1 GB memory access window */
++ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
+
-+static void
-+icache_probe(int *size, int *lsize)
-+{
-+ uint32 config1;
-+ uint sets, ways;
++ /* Enable PCI bridge BAR0 prefetch and burst */
++ val = 6;
++ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
+
-+ config1 = MFC0(C0_CONFIG, 1);
++ /* Enable PCI interrupts */
++ W_REG(&pci->intmask, PCI_INTA);
++ }
+
-+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((*lsize = ((config1 >> 19) & 7)))
-+ *lsize = 2 << *lsize;
-+ sets = 64 << ((config1 >> 22) & 7);
-+ ways = 1 + ((config1 >> 16) & 7);
-+ *size = *lsize * sets * ways;
-+}
++ /* Scan the SB bus */
++ bzero(sb_config_regs, sizeof(sb_config_regs));
++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
++ cfg->vendor = 0xffff;
++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
++ continue;
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++ /* Read ID register and parse vendor and core */
++ val = R_REG(&sb->sbidhigh);
++ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
++ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
++ progif = 0;
+
-+static void
-+handler(void)
-+{
-+ /* Step 11 */
-+ __asm__ (
-+ ".set\tmips32\n\t"
-+ "ssnop\n\t"
-+ "ssnop\n\t"
-+ /* Disable interrupts */
-+ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
-+ "mfc0 $15, $12\n\t"
-+ "and $15, $15, -31746\n\t"
-+ "mtc0 $15, $12\n\t"
-+ "eret\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ ".set\tmips0"
-+ );
-+}
++ /* Check if this core is banned */
++ for (i = 0; i < pci_banned; i++)
++ if (core == pci_ban[i])
++ break;
++ if (i < pci_banned)
++ continue;
+
-+/* The following MUST come right after handler() */
-+static void
-+afterhandler(void)
-+{
-+}
++ /* Known vendor translations */
++ switch (vendor) {
++ case SB_VEND_BCM:
++ vendor = VENDOR_BROADCOM;
++ break;
++ }
+
-+/*
-+ * Set the MIPS, backplane and PCI clocks as closely as possible.
-+ */
-+bool
-+sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
-+{
-+ extifregs_t *eir = NULL;
-+ chipcregs_t *cc = NULL;
-+ mipsregs_t *mipsr = NULL;
-+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
-+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
-+ uint32 pll_type, sync_mode;
-+ uint idx, i;
-+ struct {
-+ uint32 mipsclock;
-+ uint16 n;
-+ uint32 sb;
-+ uint32 pci33;
-+ uint32 pci25;
-+ } type1_table[] = {
-+ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */
-+ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
-+ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
-+ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
-+ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
-+ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
-+ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
-+ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
-+ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
-+ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
-+ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
-+ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
-+ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
-+ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
-+ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
-+ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
-+ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
-+ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
-+ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
-+ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
-+ };
-+ typedef struct {
-+ uint32 mipsclock;
-+ uint32 sbclock;
-+ uint16 n;
-+ uint32 sb;
-+ uint32 pci33;
-+ uint32 m2;
-+ uint32 m3;
-+ uint32 ratio;
-+ uint32 ratio_parm;
-+ } n4m_table_t;
++ /* Determine class based on known core codes */
++ switch (core) {
++ case SB_ILINE20:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ILINE_ID;
++ break;
++ case SB_ILINE100:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM4610_ILINE_ID;
++ break;
++ case SB_ENET:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ENET_ID;
++ break;
++ case SB_SDRAM:
++ case SB_MEMC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_RAM;
++ break;
++ case SB_PCI:
++ class = PCI_CLASS_BRIDGE;
++ subclass = PCI_BRIDGE_PCI;
++ //break;
++ case SB_MIPS:
++ case SB_MIPS33:
++ class = PCI_CLASS_CPU;
++ subclass = PCI_CPU_MIPS;
++ break;
++ case SB_CODEC:
++ class = PCI_CLASS_COMM;
++ subclass = PCI_COMM_MODEM;
++ core = BCM47XX_V90_ID;
++ break;
++ case SB_USB:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USB_ID;
++ break;
++ case SB_USB11H:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USBH_ID;
++ break;
++ case SB_USB11D:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ core = BCM47XX_USBD_ID;
++ break;
++ case SB_IPSEC:
++ class = PCI_CLASS_CRYPT;
++ subclass = PCI_CRYPT_NETWORK;
++ core = BCM47XX_IPSEC_ID;
++ break;
++ case SB_EXTIF:
++ case SB_CC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_FLASH;
++ break;
++ case SB_D11:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ /* Let an nvram variable override this */
++ sprintf(varname, "wl%did", wlidx);
++ wlidx++;
++ if ((core = getintvar(NULL, varname)) == 0) {
++ if (chip == BCM4712_DEVICE_ID) {
++ if (chippkg == BCM4712SMALL_PKG_ID)
++ core = BCM4306_D11G_ID;
++ else
++ core = BCM4306_D11DUAL_ID;
++ } else {
++ /* 4310 */
++ core = BCM4310_D11B_ID;
++ }
++ }
++ break;
+
-+ n4m_table_t type2_table[] = {
-+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
-+ };
++ default:
++ class = subclass = progif = 0xff;
++ break;
++ }
+
-+ n4m_table_t type4_table[] = {
-+ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
-+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
-+ };
-+ uint icache_size, ic_lsize;
-+ ulong start, end, dst;
-+ bool ret = FALSE;
++ /* Supported translations */
++ cfg->vendor = htol16(vendor);
++ cfg->device = htol16(core);
++ cfg->rev_id = chiprev;
++ cfg->prog_if = progif;
++ cfg->sub_class = subclass;
++ cfg->base_class = class;
++ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
++ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
++ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
++ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
++ cfg->base[4] = 0;
++ cfg->base[5] = 0;
++ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
++ cfg->header_type = PCI_HEADER_BRIDGE;
++ else
++ cfg->header_type = PCI_HEADER_NORMAL;
++ /* Save core interrupt flag */
++ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
++ /* Default to MIPS shared interrupt 0 */
++ cfg->int_line = 0;
++ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ val = R_REG(&sb->sbipsflag);
++ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
++ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
++ break;
++ }
++ if (cfg->int_line > 4)
++ cfg->int_line = 0;
++ }
++ /* Emulated core */
++ *((uint32 *) &cfg->sprom_control) = 0xffffffff;
++ }
+
-+ /* get index of the current core */
-+ idx = sb_coreidx(sbh);
++ sb_setcoreidx(sbh, coreidx);
++ return 0;
++}
+
-+ /* switch to extif or chipc core */
-+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+ pll_type = PLL_TYPE1;
-+ clockcontrol_n = &eir->clockcontrol_n;
-+ clockcontrol_sb = &eir->clockcontrol_sb;
-+ clockcontrol_pci = &eir->clockcontrol_pci;
-+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+ clockcontrol_n = &cc->clockcontrol_n;
-+ clockcontrol_sb = &cc->clockcontrol_sb;
-+ clockcontrol_pci = &cc->clockcontrol_pci;
-+ } else
-+ goto done;
++void
++sbpci_check(void *sbh)
++{
++ uint coreidx;
++ sbpciregs_t *pci;
++ uint32 sbtopci1;
++ uint32 buf[64], *ptr, i;
++ ulong pa;
++ volatile uint j;
+
-+ /* Store the current clock register values */
-+ orig_n = R_REG(clockcontrol_n);
-+ orig_sb = R_REG(clockcontrol_sb);
-+ orig_pci = R_REG(clockcontrol_pci);
++ coreidx = sb_coreidx(sbh);
++ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
-+ if (pll_type == PLL_TYPE1) {
-+ /* Keep the current PCI clock if not specified */
-+ if (pciclock == 0) {
-+ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
-+ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
-+ }
++ /* Clear the test array */
++ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++ memset(ptr, 0, sizeof(buf));
+
-+ /* Search for the closest MIPS clock less than or equal to a preferred value */
-+ for (i = 0; i < ARRAYSIZE(type1_table); i++) {
-+ ASSERT(type1_table[i].mipsclock ==
-+ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
-+ if (type1_table[i].mipsclock > mipsclock)
-+ break;
-+ }
-+ if (i == 0) {
-+ ret = FALSE;
-+ goto done;
-+ } else {
-+ ret = TRUE;
-+ i--;
-+ }
-+ ASSERT(type1_table[i].mipsclock <= mipsclock);
++ /* Point PCI window 1 to memory */
++ sbtopci1 = R_REG(&pci->sbtopci1);
++ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
+
-+ /* No PLL change */
-+ if ((orig_n == type1_table[i].n) &&
-+ (orig_sb == type1_table[i].sb) &&
-+ (orig_pci == type1_table[i].pci33))
-+ goto done;
-+
-+ /* Set the PLL controls */
-+ W_REG(clockcontrol_n, type1_table[i].n);
-+ W_REG(clockcontrol_sb, type1_table[i].sb);
-+ if (pciclock == 25000000)
-+ W_REG(clockcontrol_pci, type1_table[i].pci25);
-+ else
-+ W_REG(clockcontrol_pci, type1_table[i].pci33);
-+
-+ /* Reset */
-+ sb_watchdog(sbh, 1);
-+ while (1);
-+ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
-+ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
-+ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
-+
-+ ASSERT(cc);
-+
-+ /* Store the current clock register values */
-+ orig_m2 = R_REG(&cc->clockcontrol_m2);
-+ orig_mips = R_REG(&cc->clockcontrol_mips);
-+ orig_ratio_parm = 0;
-+
-+ /* Look up current ratio */
-+ for (i = 0; i < tabsz; i++) {
-+ if ((orig_n == table[i].n) &&
-+ (orig_sb == table[i].sb) &&
-+ (orig_pci == table[i].pci33) &&
-+ (orig_m2 == table[i].m2) &&
-+ (orig_mips == table[i].m3)) {
-+ orig_ratio_parm = table[i].ratio_parm;
-+ break;
-+ }
-+ }
-+
-+ /* Search for the closest MIPS clock greater or equal to a preferred value */
-+ for (i = 0; i < tabsz; i++) {
-+ ASSERT(table[i].mipsclock ==
-+ sb_clock_rate(pll_type, table[i].n, table[i].m3));
-+ if ((mipsclock <= table[i].mipsclock) &&
-+ ((sbclock == 0) || (sbclock <= table[i].sbclock)))
-+ break;
-+ }
-+ if (i == tabsz) {
-+ ret = FALSE;
-+ goto done;
-+ } else {
-+ ret = TRUE;
-+ }
-+
-+ /* No PLL change */
-+ if ((orig_n == table[i].n) &&
-+ (orig_sb == table[i].sb) &&
-+ (orig_pci == table[i].pci33) &&
-+ (orig_m2 == table[i].m2) &&
-+ (orig_mips == table[i].m3))
-+ goto done;
-+
-+ /* Set the PLL controls */
-+ W_REG(clockcontrol_n, table[i].n);
-+ W_REG(clockcontrol_sb, table[i].sb);
-+ W_REG(clockcontrol_pci, table[i].pci33);
-+ W_REG(&cc->clockcontrol_m2, table[i].m2);
-+ W_REG(&cc->clockcontrol_mips, table[i].m3);
-+
-+ /* No ratio change */
-+ if (orig_ratio_parm == table[i].ratio_parm)
-+ goto end_fill;
-+
-+ new_ratio = table[i].ratio_parm;
-+
-+ icache_probe(&icache_size, &ic_lsize);
-+
-+ /* Preload the code into the cache */
-+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
-+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+ while (start < end) {
-+ cache_unroll(start, Fill_I);
-+ start += ic_lsize;
-+ }
-+
-+ /* Copy the handler */
-+ start = (ulong) &handler;
-+ end = (ulong) &afterhandler;
-+ dst = KSEG1ADDR(0x180);
-+ for (i = 0; i < (end - start); i += 4)
-+ *((ulong *)(dst + i)) = *((ulong *)(start + i));
-+
-+ /* Preload handler into the cache one line at a time */
-+ for (i = 0; i < (end - start); i += 4)
-+ cache_unroll(dst + i, Fill_I);
-+
-+ /* Clear BEV bit */
-+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
-+
-+ /* Enable interrupts */
-+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
-+
-+ /* Enable MIPS timer interrupt */
-+ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(mipsr);
-+ W_REG(&mipsr->intmask, 1);
-+
-+ start_fill:
-+ /* step 1, set clock ratios */
-+ MTC0(C0_BROADCOM, 3, new_ratio);
-+ MTC0(C0_BROADCOM, 1, 8);
-+
-+ /* step 2: program timer intr */
-+ W_REG(&mipsr->timer, 100);
-+ (void) R_REG(&mipsr->timer);
-+
-+ /* step 3, switch to async */
-+ sync_mode = MFC0(C0_BROADCOM, 4);
-+ MTC0(C0_BROADCOM, 4, 1 << 22);
-+
-+ /* step 4, set cfg active */
-+ MTC0(C0_BROADCOM, 2, 0x9);
-+
-+
-+ /* steps 5 & 6 */
-+ __asm__ __volatile__ (
-+ ".set\tmips3\n\t"
-+ "wait\n\t"
-+ ".set\tmips0"
-+ );
-+
-+ /* step 7, clear cfg_active */
-+ MTC0(C0_BROADCOM, 2, 0);
-+
-+ /* Additional Step: set back to orig sync mode */
-+ MTC0(C0_BROADCOM, 4, sync_mode);
-+
-+ /* step 8, fake soft reset */
-+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
-+
-+ end_fill:
-+ /* step 9 set watchdog timer */
-+ sb_watchdog(sbh, 20);
-+ (void) R_REG(&cc->chipid);
-+
-+ /* step 11 */
-+ __asm__ __volatile__ (
-+ ".set\tmips3\n\t"
-+ "sync\n\t"
-+ "wait\n\t"
-+ ".set\tmips0"
-+ );
-+ while (1);
++ /* Fill the test array via PCI window 1 */
++ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
++ for (i = 0; i < ARRAYSIZE(buf); i++) {
++ for (j = 0; j < 2; j++);
++ W_REG(&ptr[i], i);
+ }
++ REG_UNMAP(ptr);
+
-+done:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
-+
-+ return ret;
-+}
-+
-+
-+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-+uint32
-+sb_memc_get_ncdl(void *sbh)
-+{
-+ sbmemcregs_t *memc;
-+ uint32 ret = 0;
-+ uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
-+ uint idx, rev;
-+
-+ idx = sb_coreidx(sbh);
-+
-+ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
-+ if (memc == 0)
-+ goto out;
-+
-+ rev = sb_corerev(sbh);
++ /* Restore PCI window 1 */
++ W_REG(&pci->sbtopci1, sbtopci1);
+
-+ config = R_REG(&memc->config);
-+ wr = R_REG(&memc->wrncdlcor);
-+ rd = R_REG(&memc->rdncdlcor);
-+ misc = R_REG(&memc->miscdlyctl);
-+ dqsg = R_REG(&memc->dqsgatencdl);
++ /* Check the test array */
++ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++ for (i = 0; i < ARRAYSIZE(buf); i++) {
++ if (ptr[i] != i)
++ break;
++ }
+
-+ rd &= MEMC_RDNCDLCOR_RD_MASK;
-+ wr &= MEMC_WRNCDLCOR_WR_MASK;
-+ dqsg &= MEMC_DQSGATENCDL_G_MASK;
++ /* Change the clock if the test fails */
++ if (i < ARRAYSIZE(buf)) {
++ uint32 req, cur;
+
-+ if (config & MEMC_CONFIG_DDR) {
-+ ret = (wr << 16) | (rd << 8) | dqsg;
-+ } else {
-+ if (rev > 0)
-+ cd = rd;
-+ else
-+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
-+ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
-+ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
-+ ret = (sm << 16) | (sd << 8) | cd;
++ cur = sb_clock(sbh);
++ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
++ for (req = 104000000; req < 176000000; req += 4000000) {
++ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
++ /* This will only reset if the clocks are valid and have changed */
++ sb_mips_setclock(sbh, req, 0, 0);
++ }
++ /* Should not reach here */
++ ASSERT(0);
+ }
+
-+out:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
-+
-+ return ret;
++ sb_setcoreidx(sbh, coreidx);
+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200
-@@ -0,0 +1,530 @@
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200
+@@ -0,0 +1,1895 @@
+/*
-+ * Low-Level PCI and SB support for BCM47xx
++ * Misc utility routines for accessing chip-specific features
++ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
++ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
+ */
+
+#include <typedefs.h>
-+#include <pcicfg.h>
++#include <osl.h>
++#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
++#include <sbchipc.h>
+#include <sbpci.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
++#include <pcicfg.h>
++#include <sbpcmcia.h>
++#include <sbextif.h>
+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <hndmips.h>
-+
-+/* Can free sbpci_init() memory after boot */
-+#ifndef linux
-+#define __init
-+#endif
++#include <bcmsrom.h>
+
-+/* Emulated configuration space */
-+static pci_config_regs sb_config_regs[SB_MAXCORES];
++/* debug/trace */
++#define SB_ERROR(args)
+
-+/* Banned cores */
-+static uint16 pci_ban[32] = { 0 };
-+static uint pci_banned = 0;
++typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
+
-+/* CardBus mode */
-+static bool cardbus = FALSE;
++/* misc sb info needed by some of the routines */
++typedef struct sb_info {
++ uint chip; /* chip number */
++ uint chiprev; /* chip revision */
++ uint chippkg; /* chip package option */
++ uint boardtype; /* board type */
++ uint boardvendor; /* board vendor id */
++ uint bus; /* what bus type we are going through */
+
-+/*
-+ * Functions for accessing external PCI configuration space
-+ */
++ void *osh; /* osl os handle */
++ void *sdh; /* bcmsdh handle */
+
-+/* Assume one-hot slot wiring */
-+#define PCI_SLOT_MAX 16
++ void *curmap; /* current regs va */
++ void *regs[SB_MAXCORES]; /* other regs va */
+
-+static uint32
-+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
-+{
-+ uint coreidx;
-+ sbpciregs_t *regs;
-+ uint32 addr = 0;
++ uint curidx; /* current core index */
++ uint dev_coreid; /* the core provides driver functions */
++ uint pciidx; /* pci core index */
++ uint pcirev; /* pci core rev */
+
-+ /* CardBusMode supports only one device */
-+ if (cardbus && dev > 1)
-+ return 0;
++ uint pcmciaidx; /* pcmcia core index */
++ uint pcmciarev; /* pcmcia core rev */
++ bool memseg; /* flag to toggle MEM_SEG register */
+
-+ coreidx = sb_coreidx(sbh);
-+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++ uint ccrev; /* chipc core rev */
+
-+ /* Type 0 transaction */
-+ if (bus == 1) {
-+ /* Skip unwired slots */
-+ if (dev < PCI_SLOT_MAX) {
-+ /* Slide the PCI window to the appropriate slot */
-+ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
-+ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
-+ (func << 8) | (off & ~3);
-+ }
-+ }
++ uint gpioidx; /* gpio control core index */
++ uint gpioid; /* gpio control coretype */
+
-+ /* Type 1 transaction */
-+ else {
-+ W_REG(®s->sbtopci1, SBTOPCI_CFG1);
-+ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
-+ }
++ uint numcores; /* # discovered cores */
++ uint coreid[SB_MAXCORES]; /* id of each core */
+
-+ sb_setcoreidx(sbh, coreidx);
++ void *intr_arg; /* interrupt callback function arg */
++ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
++ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
++} sb_info_t;
+
-+ return addr;
-+}
++/* local prototypes */
++static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++static void sb_scan(sb_info_t *si);
++static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
++static uint _sb_coreidx(void *sbh);
++static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
++static uint sb_pcidev2chip(uint pcidev);
++static uint sb_chip2numcores(uint chip);
+
-+static int
-+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++#define SB_INFO(sbh) (sb_info_t*)sbh
++#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
++ && ISALIGNED((x), SB_CORE_SIZE))
++#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE))
++#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
++#define BADIDX (SB_MAXCORES+1)
++
++#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
++#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
++#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
++#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++
++/*
++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
++ * after core switching to avoid invalid register accesss inside ISR.
++ */
++#define INTR_OFF(si, intr_val) \
++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
++#define INTR_RESTORE(si, intr_val) \
++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++
++/* power control defines */
++#define PLL_DELAY 150 /* 150us pll on delay */
++#define FREF_DELAY 15 /* 15us fref change delay */
++#define LPOMINFREQ 25000 /* low power oscillator min */
++#define LPOMAXFREQ 43000 /* low power oscillator max */
++#define XTALMINFREQ 19800000 /* 20mhz - 1% */
++#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
++#define PCIMINFREQ 25000000 /* 25mhz */
++#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
++
++#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
++
++
++static uint32
++sb_read_sbreg(void *sbh, volatile uint32 *sbr)
+{
-+ uint32 addr, *reg = NULL, val;
-+ int ret = 0;
++ sb_info_t *si;
++ uint8 tmp;
++ uint32 val, intr_val = 0;
+
-+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+ !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+ BUSPROBE(val, reg))
-+ val = 0xffffffff;
++ si = SB_INFO(sbh);
+
-+ val >>= 8 * (off & 3);
-+ if (len == 4)
-+ *((uint32 *) buf) = val;
-+ else if (len == 2)
-+ *((uint16 *) buf) = (uint16) val;
-+ else if (len == 1)
-+ *((uint8 *) buf) = (uint8) val;
-+ else
-+ ret = -1;
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if(si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/
++ }
+
-+ if (reg)
-+ REG_UNMAP(reg);
++ val = R_REG(sbr);
++
++ if(si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
+
-+ return ret;
++ return (val);
+}
+
-+static int
-+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++static void
++sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
+{
-+ uint32 addr, *reg = NULL, val;
-+ int ret = 0;
-+
-+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+ !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+ BUSPROBE(val, reg))
-+ goto done;
++ sb_info_t *si;
++ uint8 tmp;
++ volatile uint32 dummy;
++ uint32 intr_val = 0;
+
-+ if (len == 4)
-+ val = *((uint32 *) buf);
-+ else if (len == 2) {
-+ val &= ~(0xffff << (8 * (off & 3)));
-+ val |= *((uint16 *) buf) << (8 * (off & 3));
-+ } else if (len == 1) {
-+ val &= ~(0xff << (8 * (off & 3)));
-+ val |= *((uint8 *) buf) << (8 * (off & 3));
-+ } else
-+ ret = -1;
++ si = SB_INFO(sbh);
+
-+ W_REG(reg, val);
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if(si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */
++ }
+
-+ done:
-+ if (reg)
-+ REG_UNMAP(reg);
++ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
++#ifdef IL_BIGENDIAN
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++#else
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++#endif
++ } else
++ W_REG(sbr, v);
+
-+ return ret;
++ if(si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
+}
+
+/*
-+ * Functions for accessing translated SB configuration space
++ * Allocate a sb handle.
++ * devid - pci device id (used to determine chip#)
++ * osh - opaque OS handle
++ * regs - virtual address of initial core registers
++ * bustype - pci/pcmcia/sb/sdio/etc
++ * vars - pointer to a pointer area for "environment" variables
++ * varsz - pointer to int to return the size of the vars
+ */
-+
-+static int
-+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++void*
++sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
+{
-+ pci_config_regs *cfg;
++ sb_info_t *si;
+
-+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+ return -1;
-+ cfg = &sb_config_regs[dev];
++ /* alloc sb_info_t */
++ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
++ SB_ERROR(("sb_attach: malloc failed!\n"));
++ return (NULL);
++ }
+
-+ ASSERT(ISALIGNED(off, len));
-+ ASSERT(ISALIGNED(buf, len));
++ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++}
+
-+ if (len == 4)
-+ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
-+ else if (len == 2)
-+ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
-+ else if (len == 1)
-+ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
-+ else
-+ return -1;
-+
-+ return 0;
-+}
++/* global kernel resource */
++static sb_info_t ksi;
+
-+static int
-+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++/* generic kernel variant of sb_attach() */
++void*
++sb_kattach()
+{
-+ uint coreidx, n;
-+ void *regs;
-+ sbconfig_t *sb;
-+ pci_config_regs *cfg;
-+
-+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+ return -1;
-+ cfg = &sb_config_regs[dev];
++ uint32 *regs;
++ char *unused;
++ int varsz;
+
-+ ASSERT(ISALIGNED(off, len));
-+ ASSERT(ISALIGNED(buf, len));
++ if (ksi.curmap == NULL) {
++ uint32 cid;
++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
++ cid = R_REG((uint32 *)regs);
++ if ((cid == 0x08104712) || (cid == 0x08114712)) {
++ uint32 *scc, val;
+
-+ /* Emulate BAR sizing */
-+ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
-+ len == 4 && *((uint32 *) buf) == ~0) {
-+ coreidx = sb_coreidx(sbh);
-+ if ((regs = sb_setcoreidx(sbh, dev))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+ /* Highest numbered address match register */
-+ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
-+ if (off == OFFSETOF(pci_config_regs, base[0]))
-+ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
-+ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
-+ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
-+ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
-+ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
-+ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
-+ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
++ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
++ val = R_REG(scc);
++ SB_ERROR((" initial scc = 0x%x\n", val));
++ val |= SCC_SS_XTAL;
++ W_REG(scc, val);
+ }
-+ sb_setcoreidx(sbh, coreidx);
-+ return 0;
-+ }
+
-+ if (len == 4)
-+ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
-+ else if (len == 2)
-+ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
-+ else if (len == 1)
-+ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
-+ else
-+ return -1;
++ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
++ SB_BUS, NULL, &unused, &varsz);
++ }
+
-+ return 0;
++ return &ksi;
+}
+
-+int
-+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++static void*
++sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
+{
-+ if (bus == 0)
-+ return sb_read_config(sbh, bus, dev, func, off, buf, len);
-+ else
-+ return extpci_read_config(sbh, bus, dev, func, off, buf, len);
-+}
++ uint origidx;
++ chipcregs_t *cc;
++ uint32 w;
+
-+int
-+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+ if (bus == 0)
-+ return sb_write_config(sbh, bus, dev, func, off, buf, len);
-+ else
-+ return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-+}
++ ASSERT(GOODREGS(regs));
+
-+void
-+sbpci_ban(uint16 core)
-+{
-+ if (pci_banned < ARRAYSIZE(pci_ban))
-+ pci_ban[pci_banned++] = core;
-+}
++ bzero((uchar*)si, sizeof (sb_info_t));
+
-+int __init
-+sbpci_init(void *sbh)
-+{
-+ uint chip, chiprev, chippkg, coreidx, host, i;
-+ sbpciregs_t *pci;
-+ sbconfig_t *sb;
-+ pci_config_regs *cfg;
-+ void *regs;
-+ char varname[8];
-+ uint wlidx = 0;
-+ uint16 vendor, core;
-+ uint8 class, subclass, progif;
-+ uint32 val;
-+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
-+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
++ si->pciidx = si->gpioidx = BADIDX;
+
-+ chip = sb_chip(sbh);
-+ chiprev = sb_chiprev(sbh);
-+ chippkg = sb_chippkg(sbh);
-+ coreidx = sb_coreidx(sbh);
++ si->osh = osh;
++ si->curmap = regs;
++ si->sdh = sdh;
+
-+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
-+ return -1;
-+ sb_core_reset(sbh, 0);
++ /* 4317A0 PCMCIA is no longer supported */
++ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
++ return NULL;
+
-+ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
-+ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
-+ host = 0;
-+ else
-+ host = !BUSPROBE(val, &pci->control);
++ /* check to see if we are a sb core mimic'ing a pci core */
++ if (bustype == PCI_BUS) {
++ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
++ bustype = SB_BUS;
++ else
++ bustype = PCI_BUS;
++ }
+
-+ if (!host) {
-+ /* Disable PCI interrupts in client mode */
-+ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
-+ W_REG(&sb->sbintvec, 0);
++ si->bus = bustype;
+
-+ /* Disable the PCI bridge in client mode */
-+ sbpci_ban(SB_PCI);
-+ printf("PCI: Disabled\n");
-+ } else {
-+ /* Reset the external PCI bus and enable the clock */
-+ W_REG(&pci->control, 0x5); /* enable the tristate drivers */
-+ W_REG(&pci->control, 0xd); /* enable the PCI clock */
-+ OSL_DELAY(100); /* delay 100 us */
-+ W_REG(&pci->control, 0xf); /* deassert PCI reset */
-+ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */
-+ OSL_DELAY(1); /* delay 1 us */
++ /* kludge to enable the clock on the 4306 which lacks a slowclock */
++ if (si->bus == PCI_BUS)
++ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
+
-+ /* Enable CardBusMode */
-+ cardbus = nvram_match("cardbus", "1");
-+ if (cardbus) {
-+ printf("PCI: Enabling CardBus\n");
-+ /* GPIO 1 resets the CardBus device on bcm94710ap */
-+ sb_gpioout(sbh, 1, 1);
-+ sb_gpioouten(sbh, 1, 1);
-+ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
-+ }
++ /* clear any previous epidiag-induced target abort */
++ sb_taclear((void*)si);
+
-+ /* 64 MB I/O access window */
-+ W_REG(&pci->sbtopci0, SBTOPCI_IO);
-+ /* 64 MB configuration access window */
-+ W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
-+ /* 1 GB memory access window */
-+ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
++ /* initialize current core index value */
++ si->curidx = _sb_coreidx((void*)si);
+
-+ /* Enable PCI bridge BAR0 prefetch and burst */
-+ val = 6;
-+ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
++ /* keep and reuse the initial register mapping */
++ origidx = si->curidx;
++ if (si->bus == SB_BUS)
++ si->regs[origidx] = regs;
+
-+ /* Enable PCI interrupts */
-+ W_REG(&pci->intmask, PCI_INTA);
++ /* initialize the vars */
++ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
++ SB_ERROR(("sb_attach: srom_var_init failed\n"));
++ goto bad;
++ }
++
++ if (si->bus == PCMCIA_BUS) {
++ w = getintvar(*vars, "regwindowsz");
++ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
+ }
+
-+ /* Scan the SB bus */
-+ bzero(sb_config_regs, sizeof(sb_config_regs));
-+ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
-+ cfg->vendor = 0xffff;
-+ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
-+ continue;
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+ /* Read ID register and parse vendor and core */
-+ val = R_REG(&sb->sbidhigh);
-+ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
-+ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
-+ progif = 0;
++ /* is core-0 a chipcommon core? */
++ si->numcores = 1;
++ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
++ if (sb_coreid((void*)si) != SB_CC)
++ cc = NULL;
+
-+ /* Check if this core is banned */
-+ for (i = 0; i < pci_banned; i++)
-+ if (core == pci_ban[i])
-+ break;
-+ if (i < pci_banned)
-+ continue;
++ /* determine chip id and rev */
++ if (cc) {
++ /* chip common core found! */
++ si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
++ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
++ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
++ } else {
++ /* without chip common core, get devid for PCMCIA */
++ if (si->bus == PCMCIA_BUS)
++ devid = getintvar(*vars, "devid");
+
-+ /* Known vendor translations */
-+ switch (vendor) {
-+ case SB_VEND_BCM:
-+ vendor = VENDOR_BROADCOM;
-+ break;
++ /* no chip common core -- must convert device id to chip id */
++ if ((si->chip = sb_pcidev2chip(devid)) == 0) {
++ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
++ goto bad;
+ }
+
-+ /* Determine class based on known core codes */
-+ switch (core) {
-+ case SB_ILINE20:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM47XX_ILINE_ID;
-+ break;
-+ case SB_ILINE100:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM4610_ILINE_ID;
-+ break;
-+ case SB_ENET:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM47XX_ENET_ID;
-+ break;
-+ case SB_SDRAM:
-+ case SB_MEMC:
-+ class = PCI_CLASS_MEMORY;
-+ subclass = PCI_MEMORY_RAM;
-+ break;
-+ case SB_PCI:
-+ class = PCI_CLASS_BRIDGE;
-+ subclass = PCI_BRIDGE_PCI;
-+ //break;
-+ case SB_MIPS:
-+ case SB_MIPS33:
-+ class = PCI_CLASS_CPU;
-+ subclass = PCI_CPU_MIPS;
-+ break;
-+ case SB_CODEC:
-+ class = PCI_CLASS_COMM;
-+ subclass = PCI_COMM_MODEM;
-+ core = BCM47XX_V90_ID;
-+ break;
-+ case SB_USB:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ progif = 0x10; /* OHCI */
-+ core = BCM47XX_USB_ID;
-+ break;
-+ case SB_USB11H:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ progif = 0x10; /* OHCI */
-+ core = BCM47XX_USBH_ID;
-+ break;
-+ case SB_USB11D:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ core = BCM47XX_USBD_ID;
-+ break;
-+ case SB_IPSEC:
-+ class = PCI_CLASS_CRYPT;
-+ subclass = PCI_CRYPT_NETWORK;
-+ core = BCM47XX_IPSEC_ID;
-+ break;
-+ case SB_EXTIF:
-+ case SB_CC:
-+ class = PCI_CLASS_MEMORY;
-+ subclass = PCI_MEMORY_FLASH;
-+ break;
-+ case SB_D11:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_OTHER;
-+ /* Let an nvram variable override this */
-+ sprintf(varname, "wl%did", wlidx);
-+ wlidx++;
-+ if ((core = getintvar(NULL, varname)) == 0) {
-+ if (chip == BCM4712_DEVICE_ID) {
-+ if (chippkg == BCM4712SMALL_PKG_ID)
-+ core = BCM4306_D11G_ID;
-+ else
-+ core = BCM4306_D11DUAL_ID;
-+ } else {
-+ /* 4310 */
-+ core = BCM4310_D11B_ID;
-+ }
-+ }
-+ break;
-+
-+ default:
-+ class = subclass = progif = 0xff;
-+ break;
-+ }
-+
-+ /* Supported translations */
-+ cfg->vendor = htol16(vendor);
-+ cfg->device = htol16(core);
-+ cfg->rev_id = chiprev;
-+ cfg->prog_if = progif;
-+ cfg->sub_class = subclass;
-+ cfg->base_class = class;
-+ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
-+ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
-+ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
-+ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
-+ cfg->base[4] = 0;
-+ cfg->base[5] = 0;
-+ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
-+ cfg->header_type = PCI_HEADER_BRIDGE;
-+ else
-+ cfg->header_type = PCI_HEADER_NORMAL;
-+ /* Save core interrupt flag */
-+ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+ /* Default to MIPS shared interrupt 0 */
-+ cfg->int_line = 0;
-+ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
-+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+ val = R_REG(&sb->sbipsflag);
-+ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
-+ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
-+ break;
-+ }
-+ if (cfg->int_line > 4)
-+ cfg->int_line = 0;
-+ }
-+ /* Emulated core */
-+ *((uint32 *) &cfg->sprom_control) = 0xffffffff;
++ /*
++ * The chip revision number is hardwired into all
++ * of the pci function config rev fields and is
++ * independent from the individual core revision numbers.
++ * For example, the "A0" silicon of each chip is chip rev 0.
++ * For PCMCIA we get it from the CIS instead.
++ */
++ if (si->bus == PCMCIA_BUS) {
++ ASSERT(vars);
++ si->chiprev = getintvar(*vars, "chiprev");
++ } else if (si->bus == PCI_BUS) {
++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
++ si->chiprev = w & 0xff;
++ } else
++ si->chiprev = 0;
+ }
+
-+ sb_setcoreidx(sbh, coreidx);
-+ return 0;
-+}
-+
-+void
-+sbpci_check(void *sbh)
-+{
-+ uint coreidx;
-+ sbpciregs_t *pci;
-+ uint32 sbtopci1;
-+ uint32 buf[64], *ptr, i;
-+ ulong pa;
-+ volatile uint j;
++ /* get chipcommon rev */
++ si->ccrev = cc? sb_corerev((void*)si) : 0;
++
++ /* determine numcores */
++ if ((si->ccrev == 4) || (si->ccrev >= 6))
++ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
++ else
++ si->numcores = sb_chip2numcores(si->chip);
+
-+ coreidx = sb_coreidx(sbh);
-+ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++ /* return to original core */
++ sb_setcoreidx((void*)si, origidx);
+
-+ /* Clear the test array */
-+ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
-+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+ memset(ptr, 0, sizeof(buf));
++ /* sanity checks */
++ ASSERT(si->chip);
++ /* 4704A1 is chiprev 8 :-( */
++ ASSERT((si->chiprev < 8) ||
++ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
+
-+ /* Point PCI window 1 to memory */
-+ sbtopci1 = R_REG(&pci->sbtopci1);
-+ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
++ /* scan for cores */
++ sb_scan(si);
+
-+ /* Fill the test array via PCI window 1 */
-+ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
-+ for (i = 0; i < ARRAYSIZE(buf); i++) {
-+ for (j = 0; j < 2; j++);
-+ W_REG(&ptr[i], i);
++ /* pci core is required */
++ if (!GOODIDX(si->pciidx)) {
++ SB_ERROR(("sb_attach: pci core not found\n"));
++ goto bad;
+ }
-+ REG_UNMAP(ptr);
-+
-+ /* Restore PCI window 1 */
-+ W_REG(&pci->sbtopci1, sbtopci1);
+
-+ /* Check the test array */
-+ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
-+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+ for (i = 0; i < ARRAYSIZE(buf); i++) {
-+ if (ptr[i] != i)
-+ break;
++ /* gpio control core is required */
++ if (!GOODIDX(si->gpioidx)) {
++ SB_ERROR(("sb_attach: gpio control core not found\n"));
++ goto bad;
+ }
+
-+ /* Change the clock if the test fails */
-+ if (i < ARRAYSIZE(buf)) {
-+ uint32 req, cur;
++ /* get boardtype and boardrev */
++ switch (si->bus) {
++ case PCI_BUS:
++ /* do a pci config read to get subsystem id and subvendor id */
++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
++ si->boardvendor = w & 0xffff;
++ si->boardtype = (w >> 16) & 0xffff;
++ break;
+
-+ cur = sb_clock(sbh);
-+ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
-+ for (req = 104000000; req < 176000000; req += 4000000) {
-+ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
-+ /* This will only reset if the clocks are valid and have changed */
-+ sb_mips_setclock(sbh, req, 0, 0);
-+ }
-+ /* Should not reach here */
-+ ASSERT(0);
++ case PCMCIA_BUS:
++ case SDIO_BUS:
++ si->boardvendor = getintvar(*vars, "manfid");
++ si->boardtype = getintvar(*vars, "prodid");
++ break;
++
++ case SB_BUS:
++ si->boardvendor = VENDOR_BROADCOM;
++ si->boardtype = 0xffff;
++ break;
+ }
+
-+ sb_setcoreidx(sbh, coreidx);
-+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200
-@@ -0,0 +1,1895 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of the SiliconBackplane-based Broadcom chips.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
++ if (si->boardtype == 0) {
++ SB_ERROR(("sb_attach: unknown board type\n"));
++ ASSERT(si->boardtype);
++ }
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbpci.h>
-+#include <pcicfg.h>
-+#include <sbpcmcia.h>
-+#include <sbextif.h>
-+#include <sbutils.h>
-+#include <bcmsrom.h>
++ return ((void*)si);
+
-+/* debug/trace */
-+#define SB_ERROR(args)
++bad:
++ MFREE(si, sizeof (sb_info_t));
++ return (NULL);
++}
+
-+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
-+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
++uint
++sb_coreid(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+/* misc sb info needed by some of the routines */
-+typedef struct sb_info {
-+ uint chip; /* chip number */
-+ uint chiprev; /* chip revision */
-+ uint chippkg; /* chip package option */
-+ uint boardtype; /* board type */
-+ uint boardvendor; /* board vendor id */
-+ uint bus; /* what bus type we are going through */
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ void *osh; /* osl os handle */
-+ void *sdh; /* bcmsdh handle */
++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++}
+
-+ void *curmap; /* current regs va */
-+ void *regs[SB_MAXCORES]; /* other regs va */
++uint
++sb_coreidx(void *sbh)
++{
++ sb_info_t *si;
+
-+ uint curidx; /* current core index */
-+ uint dev_coreid; /* the core provides driver functions */
-+ uint pciidx; /* pci core index */
-+ uint pcirev; /* pci core rev */
++ si = SB_INFO(sbh);
++ return (si->curidx);
++}
+
-+ uint pcmciaidx; /* pcmcia core index */
-+ uint pcmciarev; /* pcmcia core rev */
-+ bool memseg; /* flag to toggle MEM_SEG register */
++/* return current index of core */
++static uint
++_sb_coreidx(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 sbaddr = 0;
+
-+ uint ccrev; /* chipc core rev */
++ si = SB_INFO(sbh);
++ ASSERT(si);
+
-+ uint gpioidx; /* gpio control core index */
-+ uint gpioid; /* gpio control coretype */
++ switch (si->bus) {
++ case SB_BUS:
++ sb = REGS2SB(si->curmap);
++ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
++ break;
+
-+ uint numcores; /* # discovered cores */
-+ uint coreid[SB_MAXCORES]; /* id of each core */
++ case PCI_BUS:
++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
++ break;
+
-+ void *intr_arg; /* interrupt callback function arg */
-+ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
-+ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
-+} sb_info_t;
++ case PCMCIA_BUS: {
++ uint8 tmp;
+
-+/* local prototypes */
-+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+static void sb_scan(sb_info_t *si);
-+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(void *sbh);
-+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
-+static uint sb_pcidev2chip(uint pcidev);
-+static uint sb_chip2numcores(uint chip);
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++ sbaddr = (uint)tmp << 12;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++ sbaddr |= (uint)tmp << 16;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ sbaddr |= (uint)tmp << 24;
++ break;
++ }
++ default:
++ ASSERT(0);
++ }
+
-+#define SB_INFO(sbh) (sb_info_t*)sbh
-+#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
-+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
-+ && ISALIGNED((x), SB_CORE_SIZE))
-+#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE))
-+#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
-+#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
-+#define BADIDX (SB_MAXCORES+1)
++ ASSERT(GOODCOREADDR(sbaddr));
++ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
++}
+
-+#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
-+#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
-+#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
-+#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++uint
++sb_corevendor(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+/*
-+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
-+ * after core switching to avoid invalid register accesss inside ISR.
-+ */
-+#define INTR_OFF(si, intr_val) \
-+ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
-+ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-+#define INTR_RESTORE(si, intr_val) \
-+ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
-+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+/* power control defines */
-+#define PLL_DELAY 150 /* 150us pll on delay */
-+#define FREF_DELAY 15 /* 15us fref change delay */
-+#define LPOMINFREQ 25000 /* low power oscillator min */
-+#define LPOMAXFREQ 43000 /* low power oscillator max */
-+#define XTALMINFREQ 19800000 /* 20mhz - 1% */
-+#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
-+#define PCIMINFREQ 25000000 /* 25mhz */
-+#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++}
+
-+#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
++uint
++sb_corerev(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+static uint32
-+sb_read_sbreg(void *sbh, volatile uint32 *sbr)
++ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
++}
++
++#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
++
++/* set/clear sbtmstatelow core-specific flags */
++uint32
++sb_coreflags(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint8 tmp;
-+ uint32 val, intr_val = 0;
++ sbconfig_t *sb;
++ uint32 w;
+
+ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ /*
-+ * compact flash only has 11 bits address, while we needs 12 bits address.
-+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+ */
-+ if(si->memseg) {
-+ INTR_OFF(si, intr_val);
-+ tmp = 1;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/
-+ }
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTML_ALLOW) == 0);
+
-+ val = R_REG(sbr);
-+
-+ if(si->memseg) {
-+ tmp = 0;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ INTR_RESTORE(si, intr_val);
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
++ W_SBREG(sbh, &sb->sbtmstatelow, w);
+ }
+
-+ return (val);
++ /* return the new value */
++ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
+}
+
-+static void
-+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
++/* set/clear sbtmstatehigh core-specific flags */
++uint32
++sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint8 tmp;
-+ volatile uint32 dummy;
-+ uint32 intr_val = 0;
++ sbconfig_t *sb;
++ uint32 w;
+
+ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ /*
-+ * compact flash only has 11 bits address, while we needs 12 bits address.
-+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+ */
-+ if(si->memseg) {
-+ INTR_OFF(si, intr_val);
-+ tmp = 1;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */
-+ }
-+
-+ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
-+#ifdef IL_BIGENDIAN
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+#else
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+#endif
-+ } else
-+ W_REG(sbr, v);
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
+
-+ if(si->memseg) {
-+ tmp = 0;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ INTR_RESTORE(si, intr_val);
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
++ W_SBREG(sbh, &sb->sbtmstatehigh, w);
+ }
++
++ /* return the new value */
++ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
+}
+
-+/*
-+ * Allocate a sb handle.
-+ * devid - pci device id (used to determine chip#)
-+ * osh - opaque OS handle
-+ * regs - virtual address of initial core registers
-+ * bustype - pci/pcmcia/sb/sdio/etc
-+ * vars - pointer to a pointer area for "environment" variables
-+ * varsz - pointer to int to return the size of the vars
-+ */
-+void*
-+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++bool
++sb_iscoreup(void *sbh)
+{
+ sb_info_t *si;
++ sbconfig_t *sb;
+
-+ /* alloc sb_info_t */
-+ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
-+ SB_ERROR(("sb_attach: malloc failed!\n"));
-+ return (NULL);
-+ }
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
+}
+
-+/* global kernel resource */
-+static sb_info_t ksi;
-+
-+/* generic kernel variant of sb_attach() */
-+void*
-+sb_kattach()
-+{
-+ uint32 *regs;
-+ char *unused;
-+ int varsz;
-+
-+ if (ksi.curmap == NULL) {
-+ uint32 cid;
-+ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
-+ cid = R_REG((uint32 *)regs);
-+ if ((cid == 0x08104712) || (cid == 0x08114712)) {
-+ uint32 *scc, val;
-+
-+ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
-+ val = R_REG(scc);
-+ SB_ERROR((" initial scc = 0x%x\n", val));
-+ val |= SCC_SS_XTAL;
-+ W_REG(scc, val);
-+ }
-+
-+ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
-+ SB_BUS, NULL, &unused, &varsz);
-+ }
-+
-+ return &ksi;
-+}
-+
-+static void*
-+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++/*
++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
++ * switch back to the original core, and return the new value.
++ */
++static uint
++sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
+{
++ sb_info_t *si;
+ uint origidx;
-+ chipcregs_t *cc;
-+ uint32 w;
-+
-+ ASSERT(GOODREGS(regs));
-+
-+ bzero((uchar*)si, sizeof (sb_info_t));
-+
-+ si->pciidx = si->gpioidx = BADIDX;
-+
-+ si->osh = osh;
-+ si->curmap = regs;
-+ si->sdh = sdh;
-+
-+ /* 4317A0 PCMCIA is no longer supported */
-+ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
-+ return NULL;
-+
-+ /* check to see if we are a sb core mimic'ing a pci core */
-+ if (bustype == PCI_BUS) {
-+ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
-+ bustype = SB_BUS;
-+ else
-+ bustype = PCI_BUS;
-+ }
-+
-+ si->bus = bustype;
++ uint32 *r;
++ uint w;
++ uint intr_val = 0;
+
-+ /* kludge to enable the clock on the 4306 which lacks a slowclock */
-+ if (si->bus == PCI_BUS)
-+ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
++ ASSERT(GOODIDX(coreidx));
++ ASSERT(regoff < SB_CORE_SIZE);
++ ASSERT((val & ~mask) == 0);
+
-+ /* clear any previous epidiag-induced target abort */
-+ sb_taclear((void*)si);
++ si = SB_INFO(sbh);
+
-+ /* initialize current core index value */
-+ si->curidx = _sb_coreidx((void*)si);
++ /* save current core index */
++ origidx = sb_coreidx(sbh);
+
-+ /* keep and reuse the initial register mapping */
-+ origidx = si->curidx;
-+ if (si->bus == SB_BUS)
-+ si->regs[origidx] = regs;
++ /* switch core */
++ INTR_OFF(si, intr_val);
++ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
+
-+ /* initialize the vars */
-+ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
-+ SB_ERROR(("sb_attach: srom_var_init failed\n"));
-+ goto bad;
-+ }
-+
-+ if (si->bus == PCMCIA_BUS) {
-+ w = getintvar(*vars, "regwindowsz");
-+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
++ /* mask and set */
++ if (mask || val) {
++ if (regoff >= SBCONFIGOFF) {
++ w = (R_SBREG(sbh, r) & ~mask) | val;
++ W_SBREG(sbh, r, w);
++ } else {
++ w = (R_REG(r) & ~mask) | val;
++ W_REG(r, w);
++ }
+ }
+
-+ /* is core-0 a chipcommon core? */
-+ si->numcores = 1;
-+ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
-+ if (sb_coreid((void*)si) != SB_CC)
-+ cc = NULL;
-+
-+ /* determine chip id and rev */
-+ if (cc) {
-+ /* chip common core found! */
-+ si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
-+ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
-+ } else {
-+ /* without chip common core, get devid for PCMCIA */
-+ if (si->bus == PCMCIA_BUS)
-+ devid = getintvar(*vars, "devid");
++ /* readback */
++ w = R_SBREG(sbh, r);
+
-+ /* no chip common core -- must convert device id to chip id */
-+ if ((si->chip = sb_pcidev2chip(devid)) == 0) {
-+ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
-+ goto bad;
-+ }
++ /* restore core index */
++ if (origidx != coreidx)
++ sb_setcoreidx(sbh, origidx);
+
-+ /*
-+ * The chip revision number is hardwired into all
-+ * of the pci function config rev fields and is
-+ * independent from the individual core revision numbers.
-+ * For example, the "A0" silicon of each chip is chip rev 0.
-+ * For PCMCIA we get it from the CIS instead.
-+ */
-+ if (si->bus == PCMCIA_BUS) {
-+ ASSERT(vars);
-+ si->chiprev = getintvar(*vars, "chiprev");
-+ } else if (si->bus == PCI_BUS) {
-+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
-+ si->chiprev = w & 0xff;
-+ } else
-+ si->chiprev = 0;
-+ }
++ INTR_RESTORE(si, intr_val);
++ return (w);
++}
+
-+ /* get chipcommon rev */
-+ si->ccrev = cc? sb_corerev((void*)si) : 0;
-+
-+ /* determine numcores */
-+ if ((si->ccrev == 4) || (si->ccrev >= 6))
-+ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
-+ else
-+ si->numcores = sb_chip2numcores(si->chip);
++/* scan the sb enumerated space to identify all cores */
++static void
++sb_scan(sb_info_t *si)
++{
++ void *sbh;
++ uint origidx;
++ uint i;
+
-+ /* return to original core */
-+ sb_setcoreidx((void*)si, origidx);
++ sbh = (void*) si;
+
-+ /* sanity checks */
-+ ASSERT(si->chip);
-+ /* 4704A1 is chiprev 8 :-( */
-+ ASSERT((si->chiprev < 8) ||
-+ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
++ /* numcores should already be set */
++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
+
-+ /* scan for cores */
-+ sb_scan(si);
++ /* save current core index */
++ origidx = sb_coreidx(sbh);
+
-+ /* pci core is required */
-+ if (!GOODIDX(si->pciidx)) {
-+ SB_ERROR(("sb_attach: pci core not found\n"));
-+ goto bad;
-+ }
++ si->pciidx = si->gpioidx = BADIDX;
+
-+ /* gpio control core is required */
-+ if (!GOODIDX(si->gpioidx)) {
-+ SB_ERROR(("sb_attach: gpio control core not found\n"));
-+ goto bad;
-+ }
++ for (i = 0; i < si->numcores; i++) {
++ sb_setcoreidx(sbh, i);
++ si->coreid[i] = sb_coreid(sbh);
+
-+ /* get boardtype and boardrev */
-+ switch (si->bus) {
-+ case PCI_BUS:
-+ /* do a pci config read to get subsystem id and subvendor id */
-+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
-+ si->boardvendor = w & 0xffff;
-+ si->boardtype = (w >> 16) & 0xffff;
-+ break;
++ if (si->coreid[i] == SB_CC)
++ si->ccrev = sb_corerev(sbh);
+
-+ case PCMCIA_BUS:
-+ case SDIO_BUS:
-+ si->boardvendor = getintvar(*vars, "manfid");
-+ si->boardtype = getintvar(*vars, "prodid");
-+ break;
++ else if (si->coreid[i] == SB_PCI) {
++ si->pciidx = i;
++ si->pcirev = sb_corerev(sbh);
+
-+ case SB_BUS:
-+ si->boardvendor = VENDOR_BROADCOM;
-+ si->boardtype = 0xffff;
-+ break;
++ }else if (si->coreid[i] == SB_PCMCIA){
++ si->pcmciaidx = i;
++ si->pcmciarev = sb_corerev(sbh);
++ }
+ }
+
-+ if (si->boardtype == 0) {
-+ SB_ERROR(("sb_attach: unknown board type\n"));
-+ ASSERT(si->boardtype);
++ /*
++ * Find the gpio "controlling core" type and index.
++ * Precedence:
++ * - if there's a chip common core - use that
++ * - else if there's a pci core (rev >= 2) - use that
++ * - else there had better be an extif core (4710 only)
++ */
++ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
++ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
++ si->gpioid = SB_CC;
++ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
++ si->gpioidx = si->pciidx;
++ si->gpioid = SB_PCI;
++ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
++ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
++ si->gpioid = SB_EXTIF;
+ }
+
-+ return ((void*)si);
-+
-+bad:
-+ MFREE(si, sizeof (sb_info_t));
-+ return (NULL);
++ /* return to original core index */
++ sb_setcoreidx(sbh, origidx);
+}
+
-+uint
-+sb_coreid(void *sbh)
++/* may be called with core in reset */
++void
++sb_detach(void *sbh)
+{
+ sb_info_t *si;
-+ sbconfig_t *sb;
++ uint idx;
+
+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
-+}
-+
-+uint
-+sb_coreidx(void *sbh)
-+{
-+ sb_info_t *si;
-+
-+ si = SB_INFO(sbh);
-+ return (si->curidx);
-+}
-+
-+/* return current index of core */
-+static uint
-+_sb_coreidx(void *sbh)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 sbaddr = 0;
-+
-+ si = SB_INFO(sbh);
-+ ASSERT(si);
-+
-+ switch (si->bus) {
-+ case SB_BUS:
-+ sb = REGS2SB(si->curmap);
-+ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
-+ break;
-+
-+ case PCI_BUS:
-+ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
-+ break;
-+
-+ case PCMCIA_BUS: {
-+ uint8 tmp;
-+
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+ sbaddr = (uint)tmp << 12;
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+ sbaddr |= (uint)tmp << 16;
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+ sbaddr |= (uint)tmp << 24;
-+ break;
-+ }
-+ default:
-+ ASSERT(0);
-+ }
-+
-+ ASSERT(GOODCOREADDR(sbaddr));
-+ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
-+}
-+
-+uint
-+sb_corevendor(void *sbh)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
-+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
-+}
-+
-+uint
-+sb_corerev(void *sbh)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
-+
-+ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
-+}
-+
-+#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
-+
-+/* set/clear sbtmstatelow core-specific flags */
-+uint32
-+sb_coreflags(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 w;
-+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
-+
-+ ASSERT((val & ~mask) == 0);
-+ ASSERT((mask & ~SBTML_ALLOW) == 0);
-+
-+ /* mask and set */
-+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatelow, w);
-+ }
-+
-+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
-+}
-+
-+/* set/clear sbtmstatehigh core-specific flags */
-+uint32
-+sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 w;
-+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
-+
-+ ASSERT((val & ~mask) == 0);
-+ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
-+
-+ /* mask and set */
-+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatehigh, w);
-+ }
-+
-+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
-+}
-+
-+bool
-+sb_iscoreup(void *sbh)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
-+
-+ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
-+}
-+
-+/*
-+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
-+ * switch back to the original core, and return the new value.
-+ */
-+static uint
-+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
-+{
-+ sb_info_t *si;
-+ uint origidx;
-+ uint32 *r;
-+ uint w;
-+ uint intr_val = 0;
-+
-+ ASSERT(GOODIDX(coreidx));
-+ ASSERT(regoff < SB_CORE_SIZE);
-+ ASSERT((val & ~mask) == 0);
-+
-+ si = SB_INFO(sbh);
-+
-+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
-+
-+ /* switch core */
-+ INTR_OFF(si, intr_val);
-+ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
-+
-+ /* mask and set */
-+ if (mask || val) {
-+ if (regoff >= SBCONFIGOFF) {
-+ w = (R_SBREG(sbh, r) & ~mask) | val;
-+ W_SBREG(sbh, r, w);
-+ } else {
-+ w = (R_REG(r) & ~mask) | val;
-+ W_REG(r, w);
-+ }
-+ }
-+
-+ /* readback */
-+ w = R_SBREG(sbh, r);
-+
-+ /* restore core index */
-+ if (origidx != coreidx)
-+ sb_setcoreidx(sbh, origidx);
-+
-+ INTR_RESTORE(si, intr_val);
-+ return (w);
-+}
-+
-+/* scan the sb enumerated space to identify all cores */
-+static void
-+sb_scan(sb_info_t *si)
-+{
-+ void *sbh;
-+ uint origidx;
-+ uint i;
-+
-+ sbh = (void*) si;
-+
-+ /* numcores should already be set */
-+ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
-+
-+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
-+
-+ si->pciidx = si->gpioidx = BADIDX;
-+
-+ for (i = 0; i < si->numcores; i++) {
-+ sb_setcoreidx(sbh, i);
-+ si->coreid[i] = sb_coreid(sbh);
-+
-+ if (si->coreid[i] == SB_CC)
-+ si->ccrev = sb_corerev(sbh);
-+
-+ else if (si->coreid[i] == SB_PCI) {
-+ si->pciidx = i;
-+ si->pcirev = sb_corerev(sbh);
-+
-+ }else if (si->coreid[i] == SB_PCMCIA){
-+ si->pcmciaidx = i;
-+ si->pcmciarev = sb_corerev(sbh);
-+ }
-+ }
-+
-+ /*
-+ * Find the gpio "controlling core" type and index.
-+ * Precedence:
-+ * - if there's a chip common core - use that
-+ * - else if there's a pci core (rev >= 2) - use that
-+ * - else there had better be an extif core (4710 only)
-+ */
-+ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
-+ si->gpioid = SB_CC;
-+ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
-+ si->gpioidx = si->pciidx;
-+ si->gpioid = SB_PCI;
-+ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
-+ si->gpioid = SB_EXTIF;
-+ }
-+
-+ /* return to original core index */
-+ sb_setcoreidx(sbh, origidx);
-+}
-+
-+/* may be called with core in reset */
-+void
-+sb_detach(void *sbh)
-+{
-+ sb_info_t *si;
-+ uint idx;
-+
-+ si = SB_INFO(sbh);
-+
-+ if (si == NULL)
-+ return;
++ if (si == NULL)
++ return;
+
+ if (si->bus == SB_BUS)
+ for (idx = 0; idx < SB_MAXCORES; idx++)
- br32(bp, B44_ENET_CTRL);
+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
+ sb_clock = 100000000; /* 100 MHz */
-+ else
-+ sb_clock = 62500000; /* 62.5 MHz */
-+
-+ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
-+ & MDIO_CTRL_MAXF_MASK)));
-+ br32(B44_MDIO_CTRL);
-+
-+ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
-+ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+ br32(B44_ENET_CTRL);
- bp->flags &= ~B44_FLAG_INTERNAL_PHY;
- } else {
-- u32 val = br32(bp, B44_DEVCTRL);
-+ u32 val = br32(B44_DEVCTRL);
-
- if (val & DEVCTRL_EPR) {
-- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-- br32(bp, B44_DEVCTRL);
-+ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+ br32(B44_DEVCTRL);
- udelay(100);
- }
- bp->flags |= B44_FLAG_INTERNAL_PHY;
-@@ -1200,13 +1233,13 @@
- /* bp->lock is held. */
- static void __b44_set_mac_addr(struct b44 *bp)
- {
-- bw32(bp, B44_CAM_CTRL, 0);
-+ bw32(B44_CAM_CTRL, 0);
- if (!(bp->dev->flags & IFF_PROMISC)) {
- u32 val;
-
- __b44_cam_write(bp, bp->dev->dev_addr, 0);
-- val = br32(bp, B44_CAM_CTRL);
-- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ val = br32(B44_CAM_CTRL);
-+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- }
- }
-
-@@ -1240,30 +1273,30 @@
- b44_setup_phy(bp);
-
- /* Enable CRC32, set proper LED modes and power on PHY */
-- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-
- /* This sets the MAC address too. */
- __b44_set_rx_mode(bp->dev);
-
- /* MTU + eth header + possible VLAN tag + struct rx_header */
-- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-
-- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
-- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+ bw32(B44_TX_WMARK, 56); /* XXX magic */
-+ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
- (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-
-- bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+ bw32(B44_DMARX_PTR, bp->rx_pending);
- bp->rx_prod = bp->rx_pending;
-
-- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-
-- val = br32(bp, B44_ENET_CTRL);
-- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+ val = br32(B44_ENET_CTRL);
-+ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
- }
-
- static int b44_open(struct net_device *dev)
-@@ -1416,11 +1449,11 @@
- int i=0;
- unsigned char zero[6] = {0,0,0,0,0,0};
-
-- val = br32(bp, B44_RXCONFIG);
-+ val = br32(B44_RXCONFIG);
- val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
- if (dev->flags & IFF_PROMISC) {
- val |= RXCONFIG_PROMISC;
-- bw32(bp, B44_RXCONFIG, val);
-+ bw32(B44_RXCONFIG, val);
- } else {
- __b44_set_mac_addr(bp);
-
-@@ -1432,9 +1465,9 @@
- for(;i<64;i++) {
- __b44_cam_write(bp, zero, i);
- }
-- bw32(bp, B44_RXCONFIG, val);
-- val = br32(bp, B44_CAM_CTRL);
-- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ bw32(B44_RXCONFIG, val);
-+ val = br32(B44_CAM_CTRL);
-+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- }
- }
-
-@@ -1704,19 +1737,41 @@
- {
- u8 eeprom[128];
- int err;
-+ unsigned long flags;
-
-- err = b44_read_eeprom(bp, &eeprom[0]);
-- if (err)
-- goto out;
--
-- bp->dev->dev_addr[0] = eeprom[79];
-- bp->dev->dev_addr[1] = eeprom[78];
-- bp->dev->dev_addr[2] = eeprom[81];
-- bp->dev->dev_addr[3] = eeprom[80];
-- bp->dev->dev_addr[4] = eeprom[83];
-- bp->dev->dev_addr[5] = eeprom[82];
--
-- bp->phy_addr = eeprom[90] & 0x1f;
-+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+ /*
-+ * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+ * a NVRAM area somewhere in the flash memory. As we don't
-+ * know the location and/or the format of the NVRAM area
-+ * here, we simply rely on the bootloader to write the
-+ * MAC into the CAM.
-+ */
-+ spin_lock_irqsave(&bp->lock, flags);
-+ __b44_cam_read(bp, bp->dev->dev_addr, 0);
-+ spin_unlock_irqrestore(&bp->lock, flags);
-+
-+ /*
-+ * BCM47xx boards don't have a PHY. Usually there is a switch
-+ * chip with multiple PHYs connected to the PHY port.
-+ */
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ bp->dma_offset = 0;
-+ } else {
-+ err = b44_read_eeprom(bp, &eeprom[0]);
-+ if (err)
-+ return err;
-+
-+ bp->dev->dev_addr[0] = eeprom[79];
-+ bp->dev->dev_addr[1] = eeprom[78];
-+ bp->dev->dev_addr[2] = eeprom[81];
-+ bp->dev->dev_addr[3] = eeprom[80];
-+ bp->dev->dev_addr[4] = eeprom[83];
-+ bp->dev->dev_addr[5] = eeprom[82];
-+
-+ bp->phy_addr = eeprom[90] & 0x1f;
-+ bp->dma_offset = SB_PCI_DMA;
-+ }
-
- /* With this, plus the rx_header prepended to the data by the
- * hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1726,13 +1781,12 @@
- bp->imask = IMASK_DEF;
-
- bp->core_unit = ssb_core_unit(bp);
-- bp->dma_offset = SB_PCI_DMA;
-
- /* XXX - really required?
- bp->flags |= B44_FLAG_BUGGY_TXPTR;
- */
--out:
-- return err;
-+
-+ return 0;
- }
-
- static int __devinit b44_init_one(struct pci_dev *pdev,
-@@ -1810,7 +1864,7 @@
-
- spin_lock_init(&bp->lock);
-
-- bp->regs = ioremap(b44reg_base, b44reg_len);
-+ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
- if (bp->regs == 0UL) {
- printk(KERN_ERR PFX "Cannot map device registers, "
- "aborting.\n");
-@@ -1871,7 +1925,8 @@
-
- pci_save_state(bp->pdev);
-
-- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? '\n' : ':');
-@@ -1879,7 +1934,7 @@
- return 0;
-
- err_out_iounmap:
-- iounmap(bp->regs);
-+ iounmap((void *) bp->regs);
-
- err_out_free_dev:
- free_netdev(dev);
-@@ -1901,7 +1956,7 @@
- struct b44 *bp = netdev_priv(dev);
-
- unregister_netdev(dev);
-- iounmap(bp->regs);
-+ iounmap((void *) bp->regs);
- free_netdev(dev);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-diff -Nur linux-2.6.12.5/drivers/net/b44.c.orig linux-2.6.12.5-brcm/drivers/net/b44.c.orig
---- linux-2.6.12.5/drivers/net/b44.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.c.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1978 @@
-+/* b44.c: Broadcom 4400 device driver.
-+ *
-+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-+ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ *
-+ * Distribute under GPL.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/if_ether.h>
-+#include <linux/etherdevice.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/version.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include "b44.h"
-+
-+#define DRV_MODULE_NAME "b44"
-+#define PFX DRV_MODULE_NAME ": "
-+#define DRV_MODULE_VERSION "0.95"
-+#define DRV_MODULE_RELDATE "Aug 3, 2004"
-+
-+#define B44_DEF_MSG_ENABLE \
-+ (NETIF_MSG_DRV | \
-+ NETIF_MSG_PROBE | \
-+ NETIF_MSG_LINK | \
-+ NETIF_MSG_TIMER | \
-+ NETIF_MSG_IFDOWN | \
-+ NETIF_MSG_IFUP | \
-+ NETIF_MSG_RX_ERR | \
-+ NETIF_MSG_TX_ERR)
-+
-+/* length of time before we decide the hardware is borked,
-+ * and dev->tx_timeout() should be called to fix the problem
-+ */
-+#define B44_TX_TIMEOUT (5 * HZ)
-+
-+/* hardware minimum and maximum for a single frame's data payload */
-+#define B44_MIN_MTU 60
-+#define B44_MAX_MTU 1500
-+
-+#define B44_RX_RING_SIZE 512
-+#define B44_DEF_RX_RING_PENDING 200
-+#define B44_RX_RING_BYTES (sizeof(struct dma_desc) * \
-+ B44_RX_RING_SIZE)
-+#define B44_TX_RING_SIZE 512
-+#define B44_DEF_TX_RING_PENDING (B44_TX_RING_SIZE - 1)
-+#define B44_TX_RING_BYTES (sizeof(struct dma_desc) * \
-+ B44_TX_RING_SIZE)
-+#define B44_DMA_MASK 0x3fffffff
-+
-+#define TX_RING_GAP(BP) \
-+ (B44_TX_RING_SIZE - (BP)->tx_pending)
-+#define TX_BUFFS_AVAIL(BP) \
-+ (((BP)->tx_cons <= (BP)->tx_prod) ? \
-+ (BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod : \
-+ (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
-+#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
-+
-+#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64)
-+#define TX_PKT_BUF_SZ (B44_MAX_MTU + ETH_HLEN + 8)
-+
-+/* minimum number of free TX descriptors required to wake up TX process */
-+#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
-+
-+static char version[] __devinitdata =
-+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-+
-+MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
-+MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_MODULE_VERSION);
-+
-+static int b44_debug = -1; /* -1 == use B44_DEF_MSG_ENABLE as value */
-+module_param(b44_debug, int, 0);
-+MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-+
-+static struct pci_device_id b44_pci_tbl[] = {
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { } /* terminate list with empty entry */
-+};
-+
-+MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
-+
-+static void b44_halt(struct b44 *);
-+static void b44_init_rings(struct b44 *);
-+static void b44_init_hw(struct b44 *);
-+static int b44_poll(struct net_device *dev, int *budget);
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void b44_poll_controller(struct net_device *dev);
-+#endif
-+
-+static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
-+{
-+ return readl(bp->regs + reg);
-+}
-+
-+static inline void bw32(const struct b44 *bp,
-+ unsigned long reg, unsigned long val)
-+{
-+ writel(val, bp->regs + reg);
-+}
-+
-+static int b44_wait_bit(struct b44 *bp, unsigned long reg,
-+ u32 bit, unsigned long timeout, const int clear)
-+{
-+ unsigned long i;
-+
-+ for (i = 0; i < timeout; i++) {
-+ u32 val = br32(bp, reg);
-+
-+ if (clear && !(val & bit))
-+ break;
-+ if (!clear && (val & bit))
-+ break;
-+ udelay(10);
-+ }
-+ if (i == timeout) {
-+ printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
-+ "%lx to %s.\n",
-+ bp->dev->name,
-+ bit, reg,
-+ (clear ? "clear" : "set"));
-+ return -ENODEV;
-+ }
-+ return 0;
-+}
-+
-+/* Sonics SiliconBackplane support routines. ROFL, you should see all the
-+ * buzz words used on this company's website :-)
-+ *
-+ * All of these routines must be invoked with bp->lock held and
-+ * interrupts disabled.
-+ */
-+
-+#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */
-+
-+static u32 ssb_get_core_rev(struct b44 *bp)
-+{
-+ return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
-+}
-+
-+static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
-+{
-+ u32 bar_orig, pci_rev, val;
-+
-+ pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig);
-+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
-+ pci_rev = ssb_get_core_rev(bp);
-+
-+ val = br32(bp, B44_SBINTVEC);
-+ val |= cores;
-+ bw32(bp, B44_SBINTVEC, val);
-+
-+ val = br32(bp, SSB_PCI_TRANS_2);
-+ val |= SSB_PCI_PREF | SSB_PCI_BURST;
-+ bw32(bp, SSB_PCI_TRANS_2, val);
-+
-+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
-+
-+ return pci_rev;
-+}
-+
-+static void ssb_core_disable(struct b44 *bp)
-+{
-+ if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
-+ return;
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
-+ b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
-+ b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
-+ SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+}
-+
-+static void ssb_core_reset(struct b44 *bp)
-+{
-+ u32 val;
-+
-+ ssb_core_disable(bp);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+
-+ /* Clear SERR if set, this is a hw bug workaround. */
-+ if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
-+ bw32(bp, B44_SBTMSHIGH, 0);
-+
-+ val = br32(bp, B44_SBIMSTATE);
-+ if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
-+ bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+}
-+
-+static int ssb_core_unit(struct b44 *bp)
-+{
-+#if 0
-+ u32 val = br32(bp, B44_SBADMATCH0);
-+ u32 base;
-+
-+ type = val & SBADMATCH0_TYPE_MASK;
-+ switch (type) {
-+ case 0:
-+ base = val & SBADMATCH0_BS0_MASK;
-+ break;
-+
-+ case 1:
-+ base = val & SBADMATCH0_BS1_MASK;
-+ break;
-+
-+ case 2:
-+ default:
-+ base = val & SBADMATCH0_BS2_MASK;
-+ break;
-+ };
-+#endif
-+ return 0;
-+}
-+
-+static int ssb_is_core_up(struct b44 *bp)
-+{
-+ return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
-+ == SBTMSLOW_CLOCK);
-+}
-+
-+static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
-+{
-+ u32 val;
-+
-+ val = ((u32) data[2]) << 24;
-+ val |= ((u32) data[3]) << 16;
-+ val |= ((u32) data[4]) << 8;
-+ val |= ((u32) data[5]) << 0;
-+ bw32(bp, B44_CAM_DATA_LO, val);
-+ val = (CAM_DATA_HI_VALID |
-+ (((u32) data[0]) << 8) |
-+ (((u32) data[1]) << 0));
-+ bw32(bp, B44_CAM_DATA_HI, val);
-+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
-+ (index << CAM_CTRL_INDEX_SHIFT)));
-+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-+}
-+
-+static inline void __b44_disable_ints(struct b44 *bp)
-+{
-+ bw32(bp, B44_IMASK, 0);
-+}
-+
-+static void b44_disable_ints(struct b44 *bp)
-+{
-+ __b44_disable_ints(bp);
-+
-+ /* Flush posted writes. */
-+ br32(bp, B44_IMASK);
-+}
-+
-+static void b44_enable_ints(struct b44 *bp)
-+{
-+ bw32(bp, B44_IMASK, bp->imask);
-+}
-+
-+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+ int err;
-+
-+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+ (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (reg << MDIO_DATA_RA_SHIFT) |
-+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
-+ err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+ *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
-+
-+ return err;
-+}
-+
-+static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+ (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (reg << MDIO_DATA_RA_SHIFT) |
-+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
-+ (val & MDIO_DATA_DATA)));
-+ return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+}
-+
-+/* miilib interface */
-+/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
-+ * due to code existing before miilib use was added to this driver.
-+ * Someone should remove this artificial driver limitation in
-+ * b44_{read,write}phy. bp->phy_addr itself is fine (and needed).
-+ */
-+static int b44_mii_read(struct net_device *dev, int phy_id, int location)
-+{
-+ u32 val;
-+ struct b44 *bp = netdev_priv(dev);
-+ int rc = b44_readphy(bp, location, &val);
-+ if (rc)
-+ return 0xffffffff;
-+ return val;
-+}
-+
-+static void b44_mii_write(struct net_device *dev, int phy_id, int location,
-+ int val)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ b44_writephy(bp, location, val);
-+}
-+
-+static int b44_phy_reset(struct b44 *bp)
-+{
-+ u32 val;
-+ int err;
-+
-+ err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
-+ if (err)
-+ return err;
-+ udelay(100);
-+ err = b44_readphy(bp, MII_BMCR, &val);
-+ if (!err) {
-+ if (val & BMCR_RESET) {
-+ printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
-+ bp->dev->name);
-+ err = -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-+{
-+ u32 val;
-+
-+ bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
-+ bp->flags |= pause_flags;
-+
-+ val = br32(bp, B44_RXCONFIG);
-+ if (pause_flags & B44_FLAG_RX_PAUSE)
-+ val |= RXCONFIG_FLOW;
-+ else
-+ val &= ~RXCONFIG_FLOW;
-+ bw32(bp, B44_RXCONFIG, val);
-+
-+ val = br32(bp, B44_MAC_FLOW);
-+ if (pause_flags & B44_FLAG_TX_PAUSE)
-+ val |= (MAC_FLOW_PAUSE_ENAB |
-+ (0xc0 & MAC_FLOW_RX_HI_WATER));
-+ else
-+ val &= ~MAC_FLOW_PAUSE_ENAB;
-+ bw32(bp, B44_MAC_FLOW, val);
-+}
-+
-+static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
-+{
-+ u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+
-+ if (local & ADVERTISE_PAUSE_CAP) {
-+ if (local & ADVERTISE_PAUSE_ASYM) {
-+ if (remote & LPA_PAUSE_CAP)
-+ pause_enab |= (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+ else if (remote & LPA_PAUSE_ASYM)
-+ pause_enab |= B44_FLAG_RX_PAUSE;
-+ } else {
-+ if (remote & LPA_PAUSE_CAP)
-+ pause_enab |= (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+ }
-+ } else if (local & ADVERTISE_PAUSE_ASYM) {
-+ if ((remote & LPA_PAUSE_CAP) &&
-+ (remote & LPA_PAUSE_ASYM))
-+ pause_enab |= B44_FLAG_TX_PAUSE;
-+ }
-+
-+ __b44_set_flow_ctrl(bp, pause_enab);
-+}
-+
-+static int b44_setup_phy(struct b44 *bp)
-+{
-+ u32 val;
-+ int err;
-+
-+ if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-+ val & MII_ALEDCTRL_ALLMSK)) != 0)
-+ goto out;
-+ if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, B44_MII_TLEDCTRL,
-+ val | MII_TLEDCTRL_ENABLE)) != 0)
-+ goto out;
-+
-+ if (!(bp->flags & B44_FLAG_FORCE_LINK)) {
-+ u32 adv = ADVERTISE_CSMA;
-+
-+ if (bp->flags & B44_FLAG_ADV_10HALF)
-+ adv |= ADVERTISE_10HALF;
-+ if (bp->flags & B44_FLAG_ADV_10FULL)
-+ adv |= ADVERTISE_10FULL;
-+ if (bp->flags & B44_FLAG_ADV_100HALF)
-+ adv |= ADVERTISE_100HALF;
-+ if (bp->flags & B44_FLAG_ADV_100FULL)
-+ adv |= ADVERTISE_100FULL;
-+
-+ if (bp->flags & B44_FLAG_PAUSE_AUTO)
-+ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+
-+ if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE |
-+ BMCR_ANRESTART))) != 0)
-+ goto out;
-+ } else {
-+ u32 bmcr;
-+
-+ if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0)
-+ goto out;
-+ bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100);
-+ if (bp->flags & B44_FLAG_100_BASE_T)
-+ bmcr |= BMCR_SPEED100;
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ bmcr |= BMCR_FULLDPLX;
-+ if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0)
-+ goto out;
-+
-+ /* Since we will not be negotiating there is no safe way
-+ * to determine if the link partner supports flow control
-+ * or not. So just disable it completely in this case.
-+ */
-+ b44_set_flow_ctrl(bp, 0, 0);
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+static void b44_stats_update(struct b44 *bp)
-+{
-+ unsigned long reg;
-+ u32 *val;
-+
-+ val = &bp->hw_stats.tx_good_octets;
-+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
-+ *val++ += br32(bp, reg);
-+ }
-+ val = &bp->hw_stats.rx_good_octets;
-+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
-+ *val++ += br32(bp, reg);
-+ }
-+}
-+
-+static void b44_link_report(struct b44 *bp)
-+{
-+ if (!netif_carrier_ok(bp->dev)) {
-+ printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
-+ } else {
-+ printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
-+ bp->dev->name,
-+ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
-+ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
-+
-+ printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
-+ "%s for RX.\n",
-+ bp->dev->name,
-+ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
-+ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
-+ }
-+}
-+
-+static void b44_check_phy(struct b44 *bp)
-+{
-+ u32 bmsr, aux;
-+
-+ if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
-+ !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
-+ (bmsr != 0xffff)) {
-+ if (aux & MII_AUXCTRL_SPEED)
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ else
-+ bp->flags &= ~B44_FLAG_100_BASE_T;
-+ if (aux & MII_AUXCTRL_DUPLEX)
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ else
-+ bp->flags &= ~B44_FLAG_FULL_DUPLEX;
-+
-+ if (!netif_carrier_ok(bp->dev) &&
-+ (bmsr & BMSR_LSTATUS)) {
-+ u32 val = br32(bp, B44_TX_CTRL);
-+ u32 local_adv, remote_adv;
-+
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ val |= TX_CTRL_DUPLEX;
-+ else
-+ val &= ~TX_CTRL_DUPLEX;
-+ bw32(bp, B44_TX_CTRL, val);
-+
-+ if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
-+ !b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
-+ !b44_readphy(bp, MII_LPA, &remote_adv))
-+ b44_set_flow_ctrl(bp, local_adv, remote_adv);
-+
-+ /* Link now up */
-+ netif_carrier_on(bp->dev);
-+ b44_link_report(bp);
-+ } else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) {
-+ /* Link now down */
-+ netif_carrier_off(bp->dev);
-+ b44_link_report(bp);
-+ }
-+
-+ if (bmsr & BMSR_RFAULT)
-+ printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
-+ bp->dev->name);
-+ if (bmsr & BMSR_JCD)
-+ printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
-+ bp->dev->name);
-+ }
-+}
-+
-+static void b44_timer(unsigned long __opaque)
-+{
-+ struct b44 *bp = (struct b44 *) __opaque;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_check_phy(bp);
-+
-+ b44_stats_update(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ bp->timer.expires = jiffies + HZ;
-+ add_timer(&bp->timer);
-+}
-+
-+static void b44_tx(struct b44 *bp)
-+{
-+ u32 cur, cons;
-+
-+ cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
-+ cur /= sizeof(struct dma_desc);
-+
-+ /* XXX needs updating when NETIF_F_SG is supported */
-+ for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) {
-+ struct ring_info *rp = &bp->tx_buffers[cons];
-+ struct sk_buff *skb = rp->skb;
-+
-+ if (unlikely(skb == NULL))
-+ BUG();
-+
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ skb->len,
-+ PCI_DMA_TODEVICE);
-+ rp->skb = NULL;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ bp->tx_cons = cons;
-+ if (netif_queue_stopped(bp->dev) &&
-+ TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
-+ netif_wake_queue(bp->dev);
-+
-+ bw32(bp, B44_GPTIMER, 0);
-+}
-+
-+/* Works like this. This chip writes a 'struct rx_header" 30 bytes
-+ * before the DMA address you give it. So we allocate 30 more bytes
-+ * for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then
-+ * point the chip at 30 bytes past where the rx_header will go.
-+ */
-+static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+ struct dma_desc *dp;
-+ struct ring_info *src_map, *map;
-+ struct rx_header *rh;
-+ struct sk_buff *skb;
-+ dma_addr_t mapping;
-+ int dest_idx;
-+ u32 ctrl;
-+
-+ src_map = NULL;
-+ if (src_idx >= 0)
-+ src_map = &bp->rx_buffers[src_idx];
-+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+ map = &bp->rx_buffers[dest_idx];
-+ skb = dev_alloc_skb(RX_PKT_BUF_SZ);
-+ if (skb == NULL)
-+ return -ENOMEM;
-+
-+ mapping = pci_map_single(bp->pdev, skb->data,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+
-+ /* Hardware bug work-around, the chip is unable to do PCI DMA
-+ to/from anything above 1GB :-( */
-+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+ /* Sigh... */
-+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(skb);
-+ skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
-+ if (skb == NULL)
-+ return -ENOMEM;
-+ mapping = pci_map_single(bp->pdev, skb->data,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(skb);
-+ return -ENOMEM;
-+ }
-+ }
-+
-+ skb->dev = bp->dev;
-+ skb_reserve(skb, bp->rx_offset);
-+
-+ rh = (struct rx_header *)
-+ (skb->data - bp->rx_offset);
-+ rh->len = 0;
-+ rh->flags = 0;
-+
-+ map->skb = skb;
-+ pci_unmap_addr_set(map, mapping, mapping);
-+
-+ if (src_map != NULL)
-+ src_map->skb = NULL;
-+
-+ ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
-+ if (dest_idx == (B44_RX_RING_SIZE - 1))
-+ ctrl |= DESC_CTRL_EOT;
-+
-+ dp = &bp->rx_ring[dest_idx];
-+ dp->ctrl = cpu_to_le32(ctrl);
-+ dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
-+
-+ return RX_PKT_BUF_SZ;
-+}
-+
-+static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+ struct dma_desc *src_desc, *dest_desc;
-+ struct ring_info *src_map, *dest_map;
-+ struct rx_header *rh;
-+ int dest_idx;
-+ u32 ctrl;
-+
-+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+ dest_desc = &bp->rx_ring[dest_idx];
-+ dest_map = &bp->rx_buffers[dest_idx];
-+ src_desc = &bp->rx_ring[src_idx];
-+ src_map = &bp->rx_buffers[src_idx];
-+
-+ dest_map->skb = src_map->skb;
-+ rh = (struct rx_header *) src_map->skb->data;
-+ rh->len = 0;
-+ rh->flags = 0;
-+ pci_unmap_addr_set(dest_map, mapping,
-+ pci_unmap_addr(src_map, mapping));
-+
-+ ctrl = src_desc->ctrl;
-+ if (dest_idx == (B44_RX_RING_SIZE - 1))
-+ ctrl |= cpu_to_le32(DESC_CTRL_EOT);
-+ else
-+ ctrl &= cpu_to_le32(~DESC_CTRL_EOT);
-+
-+ dest_desc->ctrl = ctrl;
-+ dest_desc->addr = src_desc->addr;
-+ src_map->skb = NULL;
-+
-+ pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+}
-+
-+static int b44_rx(struct b44 *bp, int budget)
-+{
-+ int received;
-+ u32 cons, prod;
-+
-+ received = 0;
-+ prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
-+ prod /= sizeof(struct dma_desc);
-+ cons = bp->rx_cons;
-+
-+ while (cons != prod && budget > 0) {
-+ struct ring_info *rp = &bp->rx_buffers[cons];
-+ struct sk_buff *skb = rp->skb;
-+ dma_addr_t map = pci_unmap_addr(rp, mapping);
-+ struct rx_header *rh;
-+ u16 len;
-+
-+ pci_dma_sync_single_for_cpu(bp->pdev, map,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ rh = (struct rx_header *) skb->data;
-+ len = cpu_to_le16(rh->len);
-+ if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
-+ (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
-+ drop_it:
-+ b44_recycle_rx(bp, cons, bp->rx_prod);
-+ drop_it_no_recycle:
-+ bp->stats.rx_dropped++;
-+ goto next_pkt;
-+ }
-+
-+ if (len == 0) {
-+ int i = 0;
-+
-+ do {
-+ udelay(2);
-+ barrier();
-+ len = cpu_to_le16(rh->len);
-+ } while (len == 0 && i++ < 5);
-+ if (len == 0)
-+ goto drop_it;
-+ }
-+
-+ /* Omit CRC. */
-+ len -= 4;
-+
-+ if (len > RX_COPY_THRESHOLD) {
-+ int skb_size;
-+ skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
-+ if (skb_size < 0)
-+ goto drop_it;
-+ pci_unmap_single(bp->pdev, map,
-+ skb_size, PCI_DMA_FROMDEVICE);
-+ /* Leave out rx_header */
-+ skb_put(skb, len+bp->rx_offset);
-+ skb_pull(skb,bp->rx_offset);
-+ } else {
-+ struct sk_buff *copy_skb;
-+
-+ b44_recycle_rx(bp, cons, bp->rx_prod);
-+ copy_skb = dev_alloc_skb(len + 2);
-+ if (copy_skb == NULL)
-+ goto drop_it_no_recycle;
-+
-+ copy_skb->dev = bp->dev;
-+ skb_reserve(copy_skb, 2);
-+ skb_put(copy_skb, len);
-+ /* DMA sync done above, copy just the actual packet */
-+ memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
-+
-+ skb = copy_skb;
-+ }
-+ skb->ip_summed = CHECKSUM_NONE;
-+ skb->protocol = eth_type_trans(skb, bp->dev);
-+ netif_receive_skb(skb);
-+ bp->dev->last_rx = jiffies;
-+ received++;
-+ budget--;
-+ next_pkt:
-+ bp->rx_prod = (bp->rx_prod + 1) &
-+ (B44_RX_RING_SIZE - 1);
-+ cons = (cons + 1) & (B44_RX_RING_SIZE - 1);
-+ }
-+
-+ bp->rx_cons = cons;
-+ bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
-+
-+ return received;
-+}
-+
-+static int b44_poll(struct net_device *netdev, int *budget)
-+{
-+ struct b44 *bp = netdev_priv(netdev);
-+ int done;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
-+ /* spin_lock(&bp->tx_lock); */
-+ b44_tx(bp);
-+ /* spin_unlock(&bp->tx_lock); */
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ done = 1;
-+ if (bp->istat & ISTAT_RX) {
-+ int orig_budget = *budget;
-+ int work_done;
-+
-+ if (orig_budget > netdev->quota)
-+ orig_budget = netdev->quota;
-+
-+ work_done = b44_rx(bp, orig_budget);
-+
-+ *budget -= work_done;
-+ netdev->quota -= work_done;
-+
-+ if (work_done >= orig_budget)
-+ done = 0;
-+ }
-+
-+ if (bp->istat & ISTAT_ERRORS) {
-+ spin_lock_irq(&bp->lock);
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_wake_queue(bp->dev);
-+ spin_unlock_irq(&bp->lock);
-+ done = 1;
-+ }
-+
-+ if (done) {
-+ netif_rx_complete(netdev);
-+ b44_enable_ints(bp);
-+ }
-+
-+ return (done ? 0 : 1);
-+}
-+
-+static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct net_device *dev = dev_id;
-+ struct b44 *bp = netdev_priv(dev);
-+ unsigned long flags;
-+ u32 istat, imask;
-+ int handled = 0;
-+
-+ spin_lock_irqsave(&bp->lock, flags);
-+
-+ istat = br32(bp, B44_ISTAT);
-+ imask = br32(bp, B44_IMASK);
-+
-+ /* ??? What the fuck is the purpose of the interrupt mask
-+ * ??? register if we have to mask it out by hand anyways?
-+ */
-+ istat &= imask;
-+ if (istat) {
-+ handled = 1;
-+ if (netif_rx_schedule_prep(dev)) {
-+ /* NOTE: These writes are posted by the readback of
-+ * the ISTAT register below.
-+ */
-+ bp->istat = istat;
-+ __b44_disable_ints(bp);
-+ __netif_rx_schedule(dev);
-+ } else {
-+ printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-+ dev->name);
-+ }
-+
-+ bw32(bp, B44_ISTAT, istat);
-+ br32(bp, B44_ISTAT);
-+ }
-+ spin_unlock_irqrestore(&bp->lock, flags);
-+ return IRQ_RETVAL(handled);
-+}
-+
-+static void b44_tx_timeout(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
-+ dev->name);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ netif_wake_queue(dev);
-+}
-+
-+static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct sk_buff *bounce_skb;
-+ dma_addr_t mapping;
-+ u32 len, entry, ctrl;
-+
-+ len = skb->len;
-+ spin_lock_irq(&bp->lock);
-+
-+ /* This is a hard error, log it. */
-+ if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
-+ netif_stop_queue(dev);
-+ spin_unlock_irq(&bp->lock);
-+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
-+ dev->name);
-+ return 1;
-+ }
-+
-+ mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-+ if(mapping+len > B44_DMA_MASK) {
-+ /* Chip can't handle DMA to/from >1GB, use bounce buffer */
-+ pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
-+
-+ bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
-+ GFP_ATOMIC|GFP_DMA);
-+ if (!bounce_skb)
-+ return NETDEV_TX_BUSY;
-+
-+ mapping = pci_map_single(bp->pdev, bounce_skb->data,
-+ len, PCI_DMA_TODEVICE);
-+ if(mapping+len > B44_DMA_MASK) {
-+ pci_unmap_single(bp->pdev, mapping,
-+ len, PCI_DMA_TODEVICE);
-+ dev_kfree_skb_any(bounce_skb);
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ memcpy(skb_put(bounce_skb, len), skb->data, skb->len);
-+ dev_kfree_skb_any(skb);
-+ skb = bounce_skb;
-+ }
-+
-+ entry = bp->tx_prod;
-+ bp->tx_buffers[entry].skb = skb;
-+ pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping);
-+
-+ ctrl = (len & DESC_CTRL_LEN);
-+ ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF;
-+ if (entry == (B44_TX_RING_SIZE - 1))
-+ ctrl |= DESC_CTRL_EOT;
-+
-+ bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
-+ bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
-+
-+ entry = NEXT_TX(entry);
-+
-+ bp->tx_prod = entry;
-+
-+ wmb();
-+
-+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+ if (bp->flags & B44_FLAG_BUGGY_TXPTR)
-+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+ if (bp->flags & B44_FLAG_REORDER_BUG)
-+ br32(bp, B44_DMATX_PTR);
-+
-+ if (TX_BUFFS_AVAIL(bp) < 1)
-+ netif_stop_queue(dev);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ dev->trans_start = jiffies;
-+
-+ return 0;
-+}
-+
-+static int b44_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU)
-+ return -EINVAL;
-+
-+ if (!netif_running(dev)) {
-+ /* We'll just catch it later when the
-+ * device is up'd.
-+ */
-+ dev->mtu = new_mtu;
-+ return 0;
-+ }
-+
-+ spin_lock_irq(&bp->lock);
-+ b44_halt(bp);
-+ dev->mtu = new_mtu;
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+/* Free up pending packets in all rx/tx rings.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver. bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_free_rings(struct b44 *bp)
-+{
-+ struct ring_info *rp;
-+ int i;
-+
-+ for (i = 0; i < B44_RX_RING_SIZE; i++) {
-+ rp = &bp->rx_buffers[i];
-+
-+ if (rp->skb == NULL)
-+ continue;
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(rp->skb);
-+ rp->skb = NULL;
-+ }
-+
-+ /* XXX needs changes once NETIF_F_SG is set... */
-+ for (i = 0; i < B44_TX_RING_SIZE; i++) {
-+ rp = &bp->tx_buffers[i];
-+
-+ if (rp->skb == NULL)
-+ continue;
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ rp->skb->len,
-+ PCI_DMA_TODEVICE);
-+ dev_kfree_skb_any(rp->skb);
-+ rp->skb = NULL;
-+ }
-+}
-+
-+/* Initialize tx/rx rings for packet processing.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver. bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_init_rings(struct b44 *bp)
-+{
-+ int i;
-+
-+ b44_free_rings(bp);
-+
-+ memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
-+ memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
-+
-+ for (i = 0; i < bp->rx_pending; i++) {
-+ if (b44_alloc_rx_skb(bp, -1, i) < 0)
-+ break;
-+ }
-+}
-+
-+/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down.
-+ */
-+static void b44_free_consistent(struct b44 *bp)
-+{
-+ if (bp->rx_buffers) {
-+ kfree(bp->rx_buffers);
-+ bp->rx_buffers = NULL;
-+ }
-+ if (bp->tx_buffers) {
-+ kfree(bp->tx_buffers);
-+ bp->tx_buffers = NULL;
-+ }
-+ if (bp->rx_ring) {
-+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ bp->rx_ring, bp->rx_ring_dma);
-+ bp->rx_ring = NULL;
-+ }
-+ if (bp->tx_ring) {
-+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ bp->tx_ring, bp->tx_ring_dma);
-+ bp->tx_ring = NULL;
-+ }
-+}
-+
-+/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down. Can sleep.
-+ */
-+static int b44_alloc_consistent(struct b44 *bp)
-+{
-+ int size;
-+
-+ size = B44_RX_RING_SIZE * sizeof(struct ring_info);
-+ bp->rx_buffers = kmalloc(size, GFP_KERNEL);
-+ if (!bp->rx_buffers)
-+ goto out_err;
-+ memset(bp->rx_buffers, 0, size);
-+
-+ size = B44_TX_RING_SIZE * sizeof(struct ring_info);
-+ bp->tx_buffers = kmalloc(size, GFP_KERNEL);
-+ if (!bp->tx_buffers)
-+ goto out_err;
-+ memset(bp->tx_buffers, 0, size);
-+
-+ size = DMA_TABLE_BYTES;
-+ bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
-+ if (!bp->rx_ring)
-+ goto out_err;
-+
-+ bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
-+ if (!bp->tx_ring)
-+ goto out_err;
-+
-+ return 0;
-+
-+out_err:
-+ b44_free_consistent(bp);
-+ return -ENOMEM;
-+}
-+
-+/* bp->lock is held. */
-+static void b44_clear_stats(struct b44 *bp)
-+{
-+ unsigned long reg;
-+
-+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
-+ br32(bp, reg);
-+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
-+ br32(bp, reg);
-+}
-+
-+/* bp->lock is held. */
-+static void b44_chip_reset(struct b44 *bp)
-+{
-+ if (ssb_is_core_up(bp)) {
-+ bw32(bp, B44_RCV_LAZY, 0);
-+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
-+ b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
-+ bw32(bp, B44_DMATX_CTRL, 0);
-+ bp->tx_prod = bp->tx_cons = 0;
-+ if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
-+ b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
-+ 100, 0);
-+ }
-+ bw32(bp, B44_DMARX_CTRL, 0);
-+ bp->rx_prod = bp->rx_cons = 0;
-+ } else {
-+ ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+ SBINTVEC_ENET0 :
-+ SBINTVEC_ENET1));
-+ }
-+
-+ ssb_core_reset(bp);
-+
-+ b44_clear_stats(bp);
-+
-+ /* Make PHY accessible. */
-+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ (0x0d & MDIO_CTRL_MAXF_MASK)));
-+ br32(bp, B44_MDIO_CTRL);
-+
-+ if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+ br32(bp, B44_ENET_CTRL);
-+ bp->flags &= ~B44_FLAG_INTERNAL_PHY;
-+ } else {
-+ u32 val = br32(bp, B44_DEVCTRL);
-+
-+ if (val & DEVCTRL_EPR) {
-+ bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+ br32(bp, B44_DEVCTRL);
-+ udelay(100);
-+ }
-+ bp->flags |= B44_FLAG_INTERNAL_PHY;
-+ }
-+}
-+
-+/* bp->lock is held. */
-+static void b44_halt(struct b44 *bp)
-+{
-+ b44_disable_ints(bp);
-+ b44_chip_reset(bp);
-+}
-+
-+/* bp->lock is held. */
-+static void __b44_set_mac_addr(struct b44 *bp)
-+{
-+ bw32(bp, B44_CAM_CTRL, 0);
-+ if (!(bp->dev->flags & IFF_PROMISC)) {
-+ u32 val;
-+
-+ __b44_cam_write(bp, bp->dev->dev_addr, 0);
-+ val = br32(bp, B44_CAM_CTRL);
-+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ }
-+}
-+
-+static int b44_set_mac_addr(struct net_device *dev, void *p)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct sockaddr *addr = p;
-+
-+ if (netif_running(dev))
-+ return -EBUSY;
-+
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ spin_lock_irq(&bp->lock);
-+ __b44_set_mac_addr(bp);
-+ spin_unlock_irq(&bp->lock);
-+
-+ return 0;
-+}
-+
-+/* Called at device open time to get the chip ready for
-+ * packet processing. Invoked with bp->lock held.
-+ */
-+static void __b44_set_rx_mode(struct net_device *);
-+static void b44_init_hw(struct b44 *bp)
-+{
-+ u32 val;
-+
-+ b44_chip_reset(bp);
-+ b44_phy_reset(bp);
-+ b44_setup_phy(bp);
-+
-+ /* Enable CRC32, set proper LED modes and power on PHY */
-+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+ bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+
-+ /* This sets the MAC address too. */
-+ __b44_set_rx_mode(bp->dev);
-+
-+ /* MTU + eth header + possible VLAN tag + struct rx_header */
-+ bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+
-+ bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
-+ bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+ bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-+ bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+
-+ bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+ bp->rx_prod = bp->rx_pending;
-+
-+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+
-+ val = br32(bp, B44_ENET_CTRL);
-+ bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+}
-+
-+static int b44_open(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ int err;
-+
-+ err = b44_alloc_consistent(bp);
-+ if (err)
-+ return err;
-+
-+ err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
-+ if (err)
-+ goto err_out_free;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ bp->flags |= B44_FLAG_INIT_COMPLETE;
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ init_timer(&bp->timer);
-+ bp->timer.expires = jiffies + HZ;
-+ bp->timer.data = (unsigned long) bp;
-+ bp->timer.function = b44_timer;
-+ add_timer(&bp->timer);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+
-+err_out_free:
-+ b44_free_consistent(bp);
-+ return err;
-+}
-+
-+#if 0
-+/*static*/ void b44_dump_state(struct b44 *bp)
-+{
-+ u32 val32, val32_2, val32_3, val32_4, val32_5;
-+ u16 val16;
-+
-+ pci_read_config_word(bp->pdev, PCI_STATUS, &val16);
-+ printk("DEBUG: PCI status [%04x] \n", val16);
-+
-+}
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+/*
-+ * Polling receive - used by netconsole and other diagnostic tools
-+ * to allow network i/o with interrupts disabled.
-+ */
-+static void b44_poll_controller(struct net_device *dev)
-+{
-+ disable_irq(dev->irq);
-+ b44_interrupt(dev->irq, dev, NULL);
-+ enable_irq(dev->irq);
-+}
-+#endif
-+
-+static int b44_close(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ netif_stop_queue(dev);
-+
-+ del_timer_sync(&bp->timer);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+#if 0
-+ b44_dump_state(bp);
-+#endif
-+ b44_halt(bp);
-+ b44_free_rings(bp);
-+ bp->flags &= ~B44_FLAG_INIT_COMPLETE;
-+ netif_carrier_off(bp->dev);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ free_irq(dev->irq, dev);
-+
-+ b44_free_consistent(bp);
-+
-+ return 0;
-+}
-+
-+static struct net_device_stats *b44_get_stats(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct net_device_stats *nstat = &bp->stats;
-+ struct b44_hw_stats *hwstat = &bp->hw_stats;
-+
-+ /* Convert HW stats into netdevice stats. */
-+ nstat->rx_packets = hwstat->rx_pkts;
-+ nstat->tx_packets = hwstat->tx_pkts;
-+ nstat->rx_bytes = hwstat->rx_octets;
-+ nstat->tx_bytes = hwstat->tx_octets;
-+ nstat->tx_errors = (hwstat->tx_jabber_pkts +
-+ hwstat->tx_oversize_pkts +
-+ hwstat->tx_underruns +
-+ hwstat->tx_excessive_cols +
-+ hwstat->tx_late_cols);
-+ nstat->multicast = hwstat->tx_multicast_pkts;
-+ nstat->collisions = hwstat->tx_total_cols;
-+
-+ nstat->rx_length_errors = (hwstat->rx_oversize_pkts +
-+ hwstat->rx_undersize);
-+ nstat->rx_over_errors = hwstat->rx_missed_pkts;
-+ nstat->rx_frame_errors = hwstat->rx_align_errs;
-+ nstat->rx_crc_errors = hwstat->rx_crc_errs;
-+ nstat->rx_errors = (hwstat->rx_jabber_pkts +
-+ hwstat->rx_oversize_pkts +
-+ hwstat->rx_missed_pkts +
-+ hwstat->rx_crc_align_errs +
-+ hwstat->rx_undersize +
-+ hwstat->rx_crc_errs +
-+ hwstat->rx_align_errs +
-+ hwstat->rx_symbol_errs);
-+
-+ nstat->tx_aborted_errors = hwstat->tx_underruns;
-+#if 0
-+ /* Carrier lost counter seems to be broken for some devices */
-+ nstat->tx_carrier_errors = hwstat->tx_carrier_lost;
-+#endif
-+
-+ return nstat;
-+}
-+
-+static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
-+{
-+ struct dev_mc_list *mclist;
-+ int i, num_ents;
-+
-+ num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE);
-+ mclist = dev->mc_list;
-+ for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
-+ __b44_cam_write(bp, mclist->dmi_addr, i + 1);
-+ }
-+ return i+1;
-+}
-+
-+static void __b44_set_rx_mode(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ u32 val;
-+ int i=0;
-+ unsigned char zero[6] = {0,0,0,0,0,0};
-+
-+ val = br32(bp, B44_RXCONFIG);
-+ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
-+ if (dev->flags & IFF_PROMISC) {
-+ val |= RXCONFIG_PROMISC;
-+ bw32(bp, B44_RXCONFIG, val);
-+ } else {
-+ __b44_set_mac_addr(bp);
-+
-+ if (dev->flags & IFF_ALLMULTI)
-+ val |= RXCONFIG_ALLMULTI;
-+ else
-+ i=__b44_load_mcast(bp, dev);
-+
-+ for(;i<64;i++) {
-+ __b44_cam_write(bp, zero, i);
-+ }
-+ bw32(bp, B44_RXCONFIG, val);
-+ val = br32(bp, B44_CAM_CTRL);
-+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ }
-+}
-+
-+static void b44_set_rx_mode(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ spin_lock_irq(&bp->lock);
-+ __b44_set_rx_mode(dev);
-+ spin_unlock_irq(&bp->lock);
-+}
-+
-+static u32 b44_get_msglevel(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ return bp->msg_enable;
-+}
-+
-+static void b44_set_msglevel(struct net_device *dev, u32 value)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ bp->msg_enable = value;
-+}
-+
-+static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct pci_dev *pci_dev = bp->pdev;
-+
-+ strcpy (info->driver, DRV_MODULE_NAME);
-+ strcpy (info->version, DRV_MODULE_VERSION);
-+ strcpy (info->bus_info, pci_name(pci_dev));
-+}
-+
-+static int b44_nway_reset(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ u32 bmcr;
-+ int r;
-+
-+ spin_lock_irq(&bp->lock);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ r = -EINVAL;
-+ if (bmcr & BMCR_ANENABLE) {
-+ b44_writephy(bp, MII_BMCR,
-+ bmcr | BMCR_ANRESTART);
-+ r = 0;
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ return r;
-+}
-+
-+static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+ cmd->supported = (SUPPORTED_Autoneg);
-+ cmd->supported |= (SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_10baseT_Half |
-+ SUPPORTED_10baseT_Full |
-+ SUPPORTED_MII);
-+
-+ cmd->advertising = 0;
-+ if (bp->flags & B44_FLAG_ADV_10HALF)
-+ cmd->advertising |= ADVERTISE_10HALF;
-+ if (bp->flags & B44_FLAG_ADV_10FULL)
-+ cmd->advertising |= ADVERTISE_10FULL;
-+ if (bp->flags & B44_FLAG_ADV_100HALF)
-+ cmd->advertising |= ADVERTISE_100HALF;
-+ if (bp->flags & B44_FLAG_ADV_100FULL)
-+ cmd->advertising |= ADVERTISE_100FULL;
-+ cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+ cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-+ SPEED_100 : SPEED_10;
-+ cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
-+ DUPLEX_FULL : DUPLEX_HALF;
-+ cmd->port = 0;
-+ cmd->phy_address = bp->phy_addr;
-+ cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-+ XCVR_INTERNAL : XCVR_EXTERNAL;
-+ cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
-+ AUTONEG_DISABLE : AUTONEG_ENABLE;
-+ cmd->maxtxpkt = 0;
-+ cmd->maxrxpkt = 0;
-+ return 0;
-+}
-+
-+static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+
-+ /* We do not support gigabit. */
-+ if (cmd->autoneg == AUTONEG_ENABLE) {
-+ if (cmd->advertising &
-+ (ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full))
-+ return -EINVAL;
-+ } else if ((cmd->speed != SPEED_100 &&
-+ cmd->speed != SPEED_10) ||
-+ (cmd->duplex != DUPLEX_HALF &&
-+ cmd->duplex != DUPLEX_FULL)) {
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ if (cmd->autoneg == AUTONEG_ENABLE) {
-+ bp->flags &= ~B44_FLAG_FORCE_LINK;
-+ bp->flags &= ~(B44_FLAG_ADV_10HALF |
-+ B44_FLAG_ADV_10FULL |
-+ B44_FLAG_ADV_100HALF |
-+ B44_FLAG_ADV_100FULL);
-+ if (cmd->advertising & ADVERTISE_10HALF)
-+ bp->flags |= B44_FLAG_ADV_10HALF;
-+ if (cmd->advertising & ADVERTISE_10FULL)
-+ bp->flags |= B44_FLAG_ADV_10FULL;
-+ if (cmd->advertising & ADVERTISE_100HALF)
-+ bp->flags |= B44_FLAG_ADV_100HALF;
-+ if (cmd->advertising & ADVERTISE_100FULL)
-+ bp->flags |= B44_FLAG_ADV_100FULL;
-+ } else {
-+ bp->flags |= B44_FLAG_FORCE_LINK;
-+ if (cmd->speed == SPEED_100)
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ if (cmd->duplex == DUPLEX_FULL)
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ }
-+
-+ b44_setup_phy(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ return 0;
-+}
-+
-+static void b44_get_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ ering->rx_max_pending = B44_RX_RING_SIZE - 1;
-+ ering->rx_pending = bp->rx_pending;
-+
-+ /* XXX ethtool lacks a tx_max_pending, oops... */
-+}
-+
-+static int b44_set_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if ((ering->rx_pending > B44_RX_RING_SIZE - 1) ||
-+ (ering->rx_mini_pending != 0) ||
-+ (ering->rx_jumbo_pending != 0) ||
-+ (ering->tx_pending > B44_TX_RING_SIZE - 1))
-+ return -EINVAL;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ bp->rx_pending = ering->rx_pending;
-+ bp->tx_pending = ering->tx_pending;
-+
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_wake_queue(bp->dev);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+static void b44_get_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *epause)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ epause->autoneg =
-+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
-+ epause->rx_pause =
-+ (bp->flags & B44_FLAG_RX_PAUSE) != 0;
-+ epause->tx_pause =
-+ (bp->flags & B44_FLAG_TX_PAUSE) != 0;
-+}
-+
-+static int b44_set_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *epause)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ spin_lock_irq(&bp->lock);
-+ if (epause->autoneg)
-+ bp->flags |= B44_FLAG_PAUSE_AUTO;
-+ else
-+ bp->flags &= ~B44_FLAG_PAUSE_AUTO;
-+ if (epause->rx_pause)
-+ bp->flags |= B44_FLAG_RX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_RX_PAUSE;
-+ if (epause->tx_pause)
-+ bp->flags |= B44_FLAG_TX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_TX_PAUSE;
-+ if (bp->flags & B44_FLAG_PAUSE_AUTO) {
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ } else {
-+ __b44_set_flow_ctrl(bp, bp->flags);
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+static struct ethtool_ops b44_ethtool_ops = {
-+ .get_drvinfo = b44_get_drvinfo,
-+ .get_settings = b44_get_settings,
-+ .set_settings = b44_set_settings,
-+ .nway_reset = b44_nway_reset,
-+ .get_link = ethtool_op_get_link,
-+ .get_ringparam = b44_get_ringparam,
-+ .set_ringparam = b44_set_ringparam,
-+ .get_pauseparam = b44_get_pauseparam,
-+ .set_pauseparam = b44_set_pauseparam,
-+ .get_msglevel = b44_get_msglevel,
-+ .set_msglevel = b44_set_msglevel,
-+};
-+
-+static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ struct b44 *bp = netdev_priv(dev);
-+ int err;
-+
-+ spin_lock_irq(&bp->lock);
-+ err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-+ spin_unlock_irq(&bp->lock);
-+
-+ return err;
-+}
-+
-+/* Read 128-bytes of EEPROM. */
-+static int b44_read_eeprom(struct b44 *bp, u8 *data)
-+{
-+ long i;
-+ u16 *ptr = (u16 *) data;
-+
-+ for (i = 0; i < 128; i += 2)
-+ ptr[i / 2] = readw(bp->regs + 4096 + i);
-+
-+ return 0;
-+}
-+
-+static int __devinit b44_get_invariants(struct b44 *bp)
-+{
-+ u8 eeprom[128];
-+ int err;
-+
-+ err = b44_read_eeprom(bp, &eeprom[0]);
-+ if (err)
-+ goto out;
-+
-+ bp->dev->dev_addr[0] = eeprom[79];
-+ bp->dev->dev_addr[1] = eeprom[78];
-+ bp->dev->dev_addr[2] = eeprom[81];
-+ bp->dev->dev_addr[3] = eeprom[80];
-+ bp->dev->dev_addr[4] = eeprom[83];
-+ bp->dev->dev_addr[5] = eeprom[82];
-+
-+ bp->phy_addr = eeprom[90] & 0x1f;
-+
-+ /* With this, plus the rx_header prepended to the data by the
-+ * hardware, we'll land the ethernet header on a 2-byte boundary.
-+ */
-+ bp->rx_offset = 30;
-+
-+ bp->imask = IMASK_DEF;
-+
-+ bp->core_unit = ssb_core_unit(bp);
-+ bp->dma_offset = SB_PCI_DMA;
-+
-+ /* XXX - really required?
-+ bp->flags |= B44_FLAG_BUGGY_TXPTR;
-+ */
-+out:
-+ return err;
-+}
-+
-+static int __devinit b44_init_one(struct pci_dev *pdev,
-+ const struct pci_device_id *ent)
-+{
-+ static int b44_version_printed = 0;
-+ unsigned long b44reg_base, b44reg_len;
-+ struct net_device *dev;
-+ struct b44 *bp;
-+ int err, i;
-+
-+ if (b44_version_printed++ == 0)
-+ printk(KERN_INFO "%s", version);
-+
-+ err = pci_enable_device(pdev);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot enable PCI device, "
-+ "aborting.\n");
-+ return err;
-+ }
-+
-+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-+ printk(KERN_ERR PFX "Cannot find proper PCI device "
-+ "base address, aborting.\n");
-+ err = -ENODEV;
-+ goto err_out_disable_pdev;
-+ }
-+
-+ err = pci_request_regions(pdev, DRV_MODULE_NAME);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot obtain PCI resources, "
-+ "aborting.\n");
-+ goto err_out_disable_pdev;
-+ }
-+
-+ pci_set_master(pdev);
-+
-+ err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
-+ if (err) {
-+ printk(KERN_ERR PFX "No usable DMA configuration, "
-+ "aborting.\n");
-+ goto err_out_free_res;
-+ }
-+
-+ err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
-+ if (err) {
-+ printk(KERN_ERR PFX "No usable DMA configuration, "
-+ "aborting.\n");
-+ goto err_out_free_res;
-+ }
-+
-+ b44reg_base = pci_resource_start(pdev, 0);
-+ b44reg_len = pci_resource_len(pdev, 0);
-+
-+ dev = alloc_etherdev(sizeof(*bp));
-+ if (!dev) {
-+ printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
-+ err = -ENOMEM;
-+ goto err_out_free_res;
-+ }
-+
-+ SET_MODULE_OWNER(dev);
-+ SET_NETDEV_DEV(dev,&pdev->dev);
-+
-+ /* No interesting netdevice features in this card... */
-+ dev->features |= 0;
-+
-+ bp = netdev_priv(dev);
-+ bp->pdev = pdev;
-+ bp->dev = dev;
-+ if (b44_debug >= 0)
-+ bp->msg_enable = (1 << b44_debug) - 1;
-+ else
-+ bp->msg_enable = B44_DEF_MSG_ENABLE;
-+
-+ spin_lock_init(&bp->lock);
-+
-+ bp->regs = ioremap(b44reg_base, b44reg_len);
-+ if (bp->regs == 0UL) {
-+ printk(KERN_ERR PFX "Cannot map device registers, "
-+ "aborting.\n");
-+ err = -ENOMEM;
-+ goto err_out_free_dev;
-+ }
-+
-+ bp->rx_pending = B44_DEF_RX_RING_PENDING;
-+ bp->tx_pending = B44_DEF_TX_RING_PENDING;
-+
-+ dev->open = b44_open;
-+ dev->stop = b44_close;
-+ dev->hard_start_xmit = b44_start_xmit;
-+ dev->get_stats = b44_get_stats;
-+ dev->set_multicast_list = b44_set_rx_mode;
-+ dev->set_mac_address = b44_set_mac_addr;
-+ dev->do_ioctl = b44_ioctl;
-+ dev->tx_timeout = b44_tx_timeout;
-+ dev->poll = b44_poll;
-+ dev->weight = 64;
-+ dev->watchdog_timeo = B44_TX_TIMEOUT;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ dev->poll_controller = b44_poll_controller;
-+#endif
-+ dev->change_mtu = b44_change_mtu;
-+ dev->irq = pdev->irq;
-+ SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
-+
-+ err = b44_get_invariants(bp);
-+ if (err) {
-+ printk(KERN_ERR PFX "Problem fetching invariants of chip, "
-+ "aborting.\n");
-+ goto err_out_iounmap;
-+ }
-+
-+ bp->mii_if.dev = dev;
-+ bp->mii_if.mdio_read = b44_mii_read;
-+ bp->mii_if.mdio_write = b44_mii_write;
-+ bp->mii_if.phy_id = bp->phy_addr;
-+ bp->mii_if.phy_id_mask = 0x1f;
-+ bp->mii_if.reg_num_mask = 0x1f;
-+
-+ /* By default, advertise all speed/duplex settings. */
-+ bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
-+ B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL);
-+
-+ /* By default, auto-negotiate PAUSE. */
-+ bp->flags |= B44_FLAG_PAUSE_AUTO;
-+
-+ err = register_netdev(dev);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot register net device, "
-+ "aborting.\n");
-+ goto err_out_iounmap;
-+ }
-+
-+ pci_set_drvdata(pdev, dev);
-+
-+ pci_save_state(bp->pdev);
-+
-+ printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ for (i = 0; i < 6; i++)
-+ printk("%2.2x%c", dev->dev_addr[i],
-+ i == 5 ? '\n' : ':');
-+
-+ return 0;
-+
-+err_out_iounmap:
-+ iounmap(bp->regs);
-+
-+err_out_free_dev:
-+ free_netdev(dev);
-+
-+err_out_free_res:
-+ pci_release_regions(pdev);
-+
-+err_out_disable_pdev:
-+ pci_disable_device(pdev);
-+ pci_set_drvdata(pdev, NULL);
-+ return err;
-+}
-+
-+static void __devexit b44_remove_one(struct pci_dev *pdev)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+
-+ if (dev) {
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+ iounmap(bp->regs);
-+ free_netdev(dev);
-+ pci_release_regions(pdev);
-+ pci_disable_device(pdev);
-+ pci_set_drvdata(pdev, NULL);
-+ }
-+}
-+
-+static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!netif_running(dev))
-+ return 0;
-+
-+ del_timer_sync(&bp->timer);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_halt(bp);
-+ netif_carrier_off(bp->dev);
-+ netif_device_detach(bp->dev);
-+ b44_free_rings(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+ return 0;
-+}
-+
-+static int b44_resume(struct pci_dev *pdev)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+ struct b44 *bp = netdev_priv(dev);
++ else
++ sb_clock = 62500000; /* 62.5 MHz */
+
-+ pci_restore_state(pdev);
++ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
++ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
++ & MDIO_CTRL_MAXF_MASK)));
++ br32(B44_MDIO_CTRL);
+
-+ if (!netif_running(dev))
-+ return 0;
++ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
++ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
++ br32(B44_ENET_CTRL);
+ bp->flags &= ~B44_FLAG_INTERNAL_PHY;
+ } else {
+- u32 val = br32(bp, B44_DEVCTRL);
++ u32 val = br32(B44_DEVCTRL);
+
+ if (val & DEVCTRL_EPR) {
+- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
+- br32(bp, B44_DEVCTRL);
++ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
++ br32(B44_DEVCTRL);
+ udelay(100);
+ }
+ bp->flags |= B44_FLAG_INTERNAL_PHY;
+@@ -1200,13 +1233,13 @@
+ /* bp->lock is held. */
+ static void __b44_set_mac_addr(struct b44 *bp)
+ {
+- bw32(bp, B44_CAM_CTRL, 0);
++ bw32(B44_CAM_CTRL, 0);
+ if (!(bp->dev->flags & IFF_PROMISC)) {
+ u32 val;
+
+ __b44_cam_write(bp, bp->dev->dev_addr, 0);
+- val = br32(bp, B44_CAM_CTRL);
+- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
++ val = br32(B44_CAM_CTRL);
++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ }
+ }
+
+@@ -1240,30 +1273,30 @@
+ b44_setup_phy(bp);
+
+ /* Enable CRC32, set proper LED modes and power on PHY */
+- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
+- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
++ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
++ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
+
+ /* This sets the MAC address too. */
+ __b44_set_rx_mode(bp->dev);
+
+ /* MTU + eth header + possible VLAN tag + struct rx_header */
+- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
++ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
++ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+
+- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
+- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
+- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
+- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
++ bw32(B44_TX_WMARK, 56); /* XXX magic */
++ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
++ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
++ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
++ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
+
+- bw32(bp, B44_DMARX_PTR, bp->rx_pending);
++ bw32(B44_DMARX_PTR, bp->rx_pending);
+ bp->rx_prod = bp->rx_pending;
+
+- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
++ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
+
+- val = br32(bp, B44_ENET_CTRL);
+- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
++ val = br32(B44_ENET_CTRL);
++ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
+ }
+
+ static int b44_open(struct net_device *dev)
+@@ -1416,11 +1449,11 @@
+ int i=0;
+ unsigned char zero[6] = {0,0,0,0,0,0};
+
+- val = br32(bp, B44_RXCONFIG);
++ val = br32(B44_RXCONFIG);
+ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
+ if (dev->flags & IFF_PROMISC) {
+ val |= RXCONFIG_PROMISC;
+- bw32(bp, B44_RXCONFIG, val);
++ bw32(B44_RXCONFIG, val);
+ } else {
+ __b44_set_mac_addr(bp);
+
+@@ -1432,9 +1465,9 @@
+ for(;i<64;i++) {
+ __b44_cam_write(bp, zero, i);
+ }
+- bw32(bp, B44_RXCONFIG, val);
+- val = br32(bp, B44_CAM_CTRL);
+- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
++ bw32(B44_RXCONFIG, val);
++ val = br32(B44_CAM_CTRL);
++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ }
+ }
+
+@@ -1704,19 +1737,41 @@
+ {
+ u8 eeprom[128];
+ int err;
++ unsigned long flags;
+
+- err = b44_read_eeprom(bp, &eeprom[0]);
+- if (err)
+- goto out;
+-
+- bp->dev->dev_addr[0] = eeprom[79];
+- bp->dev->dev_addr[1] = eeprom[78];
+- bp->dev->dev_addr[2] = eeprom[81];
+- bp->dev->dev_addr[3] = eeprom[80];
+- bp->dev->dev_addr[4] = eeprom[83];
+- bp->dev->dev_addr[5] = eeprom[82];
+-
+- bp->phy_addr = eeprom[90] & 0x1f;
++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
++ /*
++ * BCM47xx boards don't have a EEPROM. The MAC is stored in
++ * a NVRAM area somewhere in the flash memory. As we don't
++ * know the location and/or the format of the NVRAM area
++ * here, we simply rely on the bootloader to write the
++ * MAC into the CAM.
++ */
++ spin_lock_irqsave(&bp->lock, flags);
++ __b44_cam_read(bp, bp->dev->dev_addr, 0);
++ spin_unlock_irqrestore(&bp->lock, flags);
+
-+ spin_lock_irq(&bp->lock);
++ /*
++ * BCM47xx boards don't have a PHY. Usually there is a switch
++ * chip with multiple PHYs connected to the PHY port.
++ */
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ bp->dma_offset = 0;
++ } else {
++ err = b44_read_eeprom(bp, &eeprom[0]);
++ if (err)
++ return err;
+
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_device_attach(bp->dev);
-+ spin_unlock_irq(&bp->lock);
++ bp->dev->dev_addr[0] = eeprom[79];
++ bp->dev->dev_addr[1] = eeprom[78];
++ bp->dev->dev_addr[2] = eeprom[81];
++ bp->dev->dev_addr[3] = eeprom[80];
++ bp->dev->dev_addr[4] = eeprom[83];
++ bp->dev->dev_addr[5] = eeprom[82];
+
-+ bp->timer.expires = jiffies + HZ;
-+ add_timer(&bp->timer);
++ bp->phy_addr = eeprom[90] & 0x1f;
++ bp->dma_offset = SB_PCI_DMA;
++ }
+
+ /* With this, plus the rx_header prepended to the data by the
+ * hardware, we'll land the ethernet header on a 2-byte boundary.
+@@ -1726,13 +1781,12 @@
+ bp->imask = IMASK_DEF;
+
+ bp->core_unit = ssb_core_unit(bp);
+- bp->dma_offset = SB_PCI_DMA;
+
+ /* XXX - really required?
+ bp->flags |= B44_FLAG_BUGGY_TXPTR;
+ */
+-out:
+- return err;
+
-+ b44_enable_ints(bp);
+ return 0;
-+}
-+
-+static struct pci_driver b44_driver = {
-+ .name = DRV_MODULE_NAME,
-+ .id_table = b44_pci_tbl,
-+ .probe = b44_init_one,
-+ .remove = __devexit_p(b44_remove_one),
-+ .suspend = b44_suspend,
-+ .resume = b44_resume,
-+};
-+
-+static int __init b44_init(void)
-+{
-+ return pci_module_init(&b44_driver);
-+}
-+
-+static void __exit b44_cleanup(void)
-+{
-+ pci_unregister_driver(&b44_driver);
-+}
-+
-+module_init(b44_init);
-+module_exit(b44_cleanup);
-+
+ }
+
+ static int __devinit b44_init_one(struct pci_dev *pdev,
+@@ -1810,7 +1864,7 @@
+
+ spin_lock_init(&bp->lock);
+
+- bp->regs = ioremap(b44reg_base, b44reg_len);
++ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
+ if (bp->regs == 0UL) {
+ printk(KERN_ERR PFX "Cannot map device registers, "
+ "aborting.\n");
+@@ -1871,7 +1925,8 @@
+
+ pci_save_state(bp->pdev);
+
+- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
++ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
++ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", dev->dev_addr[i],
+ i == 5 ? '\n' : ':');
+@@ -1879,7 +1934,7 @@
+ return 0;
+
+ err_out_iounmap:
+- iounmap(bp->regs);
++ iounmap((void *) bp->regs);
+
+ err_out_free_dev:
+ free_netdev(dev);
+@@ -1901,7 +1956,7 @@
+ struct b44 *bp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+- iounmap(bp->regs);
++ iounmap((void *) bp->regs);
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h
--- linux-2.6.12.5/drivers/net/b44.h 2005-08-15 02:20:18.000000000 +0200
+++ linux-2.6.12.5-brcm/drivers/net/b44.h 2005-08-28 11:12:20.694819024 +0200
struct pci_dev *pdev;
struct net_device *dev;
-diff -Nur linux-2.6.12.5/drivers/net/b44.h.orig linux-2.6.12.5-brcm/drivers/net/b44.h.orig
---- linux-2.6.12.5/drivers/net/b44.h.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.h.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,427 @@
-+#ifndef _B44_H
-+#define _B44_H
-+
-+/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
-+#define B44_DEVCTRL 0x0000UL /* Device Control */
-+#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */
-+#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */
-+#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */
-+#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */
-+#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */
-+#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */
-+#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */
-+#define DEVCTRL_PADDR_SHIFT 18
-+#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */
-+#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */
-+#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */
-+#define WKUP_LEN_D0 0x00000080
-+#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */
-+#define WKUP_LEN_P1_SHIFT 8
-+#define WKUP_LEN_D1 0x00008000
-+#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */
-+#define WKUP_LEN_P2_SHIFT 16
-+#define WKUP_LEN_D2 0x00000000
-+#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */
-+#define WKUP_LEN_P3_SHIFT 24
-+#define WKUP_LEN_D3 0x80000000
-+#define B44_ISTAT 0x0020UL /* Interrupt Status */
-+#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */
-+#define ISTAT_PME 0x00000040 /* Power Management Event */
-+#define ISTAT_TO 0x00000080 /* General Purpose Timeout */
-+#define ISTAT_DSCE 0x00000400 /* Descriptor Error */
-+#define ISTAT_DATAE 0x00000800 /* Data Error */
-+#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */
-+#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */
-+#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */
-+#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */
-+#define ISTAT_RX 0x00010000 /* RX Interrupt */
-+#define ISTAT_TX 0x01000000 /* TX Interrupt */
-+#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */
-+#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */
-+#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */
-+#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
-+#define B44_IMASK 0x0024UL /* Interrupt Mask */
-+#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
-+#define B44_GPTIMER 0x0028UL /* General Purpose Timer */
-+#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */
-+#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */
-+#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */
-+#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */
-+#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */
-+#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */
-+#define B44_MAC_CTRL 0x00A8UL /* MAC Control */
-+#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */
-+#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */
-+#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */
-+#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */
-+#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5
-+#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */
-+#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */
-+#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */
-+#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */
-+#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */
-+#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */
-+#define RCV_LAZY_FC_SHIFT 24
-+#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */
-+#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */
-+#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */
-+#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */
-+#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */
-+#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */
-+#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */
-+#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */
-+#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */
-+#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
-+#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */
-+#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */
-+#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */
-+#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */
-+#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */
-+#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */
-+#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */
-+#define DMATX_STAT_ENONE 0x00000000 /* Error None */
-+#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
-+#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */
-+#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */
-+#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
-+#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */
-+#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */
-+#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */
-+#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */
-+#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */
-+#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */
-+#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */
-+#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
-+#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
-+#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
-+#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
-+#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
-+#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
-+#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
-+#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */
-+#define DMARX_STAT_ENONE 0x00000000 /* Error None */
-+#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
-+#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */
-+#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */
-+#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
-+#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */
-+#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */
-+#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */
-+#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */
-+#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */
-+#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */
-+#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */
-+#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */
-+#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */
-+#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */
-+#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */
-+#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */
-+#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */
-+#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */
-+#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */
-+#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */
-+#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */
-+#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */
-+#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */
-+#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
-+#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
-+#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
-+#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
-+#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
-+#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
-+#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */
-+#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */
-+#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */
-+#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */
-+#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */
-+#define MDIO_DATA_TA_SHIFT 16
-+#define MDIO_TA_VALID 2
-+#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */
-+#define MDIO_DATA_RA_SHIFT 18
-+#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */
-+#define MDIO_DATA_PMD_SHIFT 23
-+#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */
-+#define MDIO_DATA_OP_SHIFT 28
-+#define MDIO_OP_WRITE 1
-+#define MDIO_OP_READ 2
-+#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */
-+#define MDIO_DATA_SB_SHIFT 30
-+#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */
-+#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */
-+#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */
-+#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */
-+#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
-+#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */
-+#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */
-+#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */
-+#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */
-+#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */
-+#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */
-+#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */
-+#define CAM_CTRL_READ 0x00000004 /* Read */
-+#define CAM_CTRL_WRITE 0x00000008 /* Read */
-+#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */
-+#define CAM_CTRL_INDEX_SHIFT 16
-+#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */
-+#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */
-+#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */
-+#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */
-+#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */
-+#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */
-+#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */
-+#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */
-+#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */
-+#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */
-+#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */
-+#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */
-+#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */
-+#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */
-+#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */
-+#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */
-+#define B44_TX_O 0x0508UL /* MIB TX Octets */
-+#define B44_TX_P 0x050CUL /* MIB TX Packets */
-+#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */
-+#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */
-+#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */
-+#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */
-+#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */
-+#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */
-+#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */
-+#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */
-+#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */
-+#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */
-+#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */
-+#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */
-+#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */
-+#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */
-+#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */
-+#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */
-+#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */
-+#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */
-+#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */
-+#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */
-+#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */
-+#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */
-+#define B44_RX_O 0x0588UL /* MIB RX Octets */
-+#define B44_RX_P 0x058CUL /* MIB RX Packets */
-+#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */
-+#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */
-+#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */
-+#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */
-+#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */
-+#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */
-+#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */
-+#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */
-+#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */
-+#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */
-+#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */
-+#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */
-+#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */
-+#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */
-+#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */
-+#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */
-+#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */
-+#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */
-+#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */
-+
-+/* Silicon backplane register definitions */
-+#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */
-+#define SBIMSTATE_PC 0x0000000f /* Pipe Count */
-+#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
-+#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
-+#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */
-+#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */
-+#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */
-+#define SBIMSTATE_IBE 0x00020000 /* In Band Error */
-+#define SBIMSTATE_TO 0x00040000 /* Timeout */
-+#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */
-+#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
-+#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
-+#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
-+#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
-+#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */
-+#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
-+#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
-+#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */
-+#define SBTMSLOW_RESET 0x00000001 /* Reset */
-+#define SBTMSLOW_REJECT 0x00000002 /* Reject */
-+#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */
-+#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
-+#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */
-+#define SBTMSLOW_BE 0x80000000 /* BIST Enable */
-+#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */
-+#define SBTMSHIGH_SERR 0x00000001 /* S-error */
-+#define SBTMSHIGH_INT 0x00000002 /* Interrupt */
-+#define SBTMSHIGH_BUSY 0x00000004 /* Busy */
-+#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */
-+#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */
-+#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */
-+#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */
-+#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */
-+#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */
-+#define SBIDHIGH_CC_SHIFT 4
-+#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */
-+#define SBIDHIGH_VC_SHIFT 16
-+
-+/* SSB PCI config space registers. */
-+#define SSB_BAR0_WIN 0x80
-+#define SSB_BAR1_WIN 0x84
-+#define SSB_SPROM_CONTROL 0x88
-+#define SSB_BAR1_CONTROL 0x8c
-+
-+/* SSB core and host control registers. */
-+#define SSB_CONTROL 0x0000UL
-+#define SSB_ARBCONTROL 0x0010UL
-+#define SSB_ISTAT 0x0020UL
-+#define SSB_IMASK 0x0024UL
-+#define SSB_MBOX 0x0028UL
-+#define SSB_BCAST_ADDR 0x0050UL
-+#define SSB_BCAST_DATA 0x0054UL
-+#define SSB_PCI_TRANS_0 0x0100UL
-+#define SSB_PCI_TRANS_1 0x0104UL
-+#define SSB_PCI_TRANS_2 0x0108UL
-+#define SSB_SPROM 0x0800UL
-+
-+#define SSB_PCI_MEM 0x00000000
-+#define SSB_PCI_IO 0x00000001
-+#define SSB_PCI_CFG0 0x00000002
-+#define SSB_PCI_CFG1 0x00000003
-+#define SSB_PCI_PREF 0x00000004
-+#define SSB_PCI_BURST 0x00000008
-+#define SSB_PCI_MASK0 0xfc000000
-+#define SSB_PCI_MASK1 0xfc000000
-+#define SSB_PCI_MASK2 0xc0000000
-+
-+/* 4400 PHY registers */
-+#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
-+#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
-+#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */
-+#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */
-+#define B44_MII_ALEDCTRL 26 /* Activity LED */
-+#define MII_ALEDCTRL_ALLMSK 0x7fff
-+#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */
-+#define MII_TLEDCTRL_ENABLE 0x0040
-+
-+struct dma_desc {
-+ u32 ctrl;
-+ u32 addr;
-+};
-+
-+/* There are only 12 bits in the DMA engine for descriptor offsetting
-+ * so the table must be aligned on a boundary of this.
-+ */
-+#define DMA_TABLE_BYTES 4096
-+
-+#define DESC_CTRL_LEN 0x00001fff
-+#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */
-+#define DESC_CTRL_EOT 0x10000000 /* End of Table */
-+#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */
-+#define DESC_CTRL_EOF 0x40000000 /* End of Frame */
-+#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */
-+
-+#define RX_COPY_THRESHOLD 256
-+
-+struct rx_header {
-+ u16 len;
-+ u16 flags;
-+ u16 pad[12];
-+};
-+#define RX_HEADER_LEN 28
-+
-+#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */
-+#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */
-+#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */
-+#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */
-+#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */
-+#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */
-+#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */
-+#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */
-+#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */
-+#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
-+
-+struct ring_info {
-+ struct sk_buff *skb;
-+ DECLARE_PCI_UNMAP_ADDR(mapping);
-+};
-+
-+#define B44_MCAST_TABLE_SIZE 32
-+
-+/* SW copy of device statistics, kept up to date by periodic timer
-+ * which probes HW values. Must have same relative layout as HW
-+ * register above, because b44_stats_update depends upon this.
-+ */
-+struct b44_hw_stats {
-+ u32 tx_good_octets, tx_good_pkts, tx_octets;
-+ u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
-+ u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
-+ u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
-+ u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
-+ u32 tx_underruns, tx_total_cols, tx_single_cols;
-+ u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols;
-+ u32 tx_defered, tx_carrier_lost, tx_pause_pkts;
-+ u32 __pad1[8];
-+
-+ u32 rx_good_octets, rx_good_pkts, rx_octets;
-+ u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
-+ u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
-+ u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
-+ u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
-+ u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize;
-+ u32 rx_crc_errs, rx_align_errs, rx_symbol_errs;
-+ u32 rx_pause_pkts, rx_nonpause_pkts;
-+};
-+
-+struct b44 {
-+ spinlock_t lock;
-+
-+ u32 imask, istat;
-+
-+ struct dma_desc *rx_ring, *tx_ring;
-+
-+ u32 tx_prod, tx_cons;
-+ u32 rx_prod, rx_cons;
-+
-+ struct ring_info *rx_buffers;
-+ struct ring_info *tx_buffers;
-+
-+ u32 dma_offset;
-+ u32 flags;
-+#define B44_FLAG_INIT_COMPLETE 0x00000001
-+#define B44_FLAG_BUGGY_TXPTR 0x00000002
-+#define B44_FLAG_REORDER_BUG 0x00000004
-+#define B44_FLAG_PAUSE_AUTO 0x00008000
-+#define B44_FLAG_FULL_DUPLEX 0x00010000
-+#define B44_FLAG_100_BASE_T 0x00020000
-+#define B44_FLAG_TX_PAUSE 0x00040000
-+#define B44_FLAG_RX_PAUSE 0x00080000
-+#define B44_FLAG_FORCE_LINK 0x00100000
-+#define B44_FLAG_ADV_10HALF 0x01000000
-+#define B44_FLAG_ADV_10FULL 0x02000000
-+#define B44_FLAG_ADV_100HALF 0x04000000
-+#define B44_FLAG_ADV_100FULL 0x08000000
-+#define B44_FLAG_INTERNAL_PHY 0x10000000
-+
-+ u32 rx_offset;
-+
-+ u32 msg_enable;
-+
-+ struct timer_list timer;
-+
-+ struct net_device_stats stats;
-+ struct b44_hw_stats hw_stats;
-+
-+ void __iomem *regs;
-+ struct pci_dev *pdev;
-+ struct net_device *dev;
-+
-+ dma_addr_t rx_ring_dma, tx_ring_dma;
-+
-+ u32 rx_pending;
-+ u32 tx_pending;
-+ u8 phy_addr;
-+ u8 core_unit;
-+
-+ struct mii_if_info mii_if;
-+};
-+
-+#endif /* _B44_H */
diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h
--- linux-2.6.12.5/include/asm-mips/bootinfo.h 2005-08-15 02:20:18.000000000 +0200
+++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h 2005-08-28 11:12:20.695818872 +0200
#define PCI_VENDOR_ID_TOPIC 0x151f
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
-diff -Nur linux-2.6.12.5/include/linux/pci_ids.h.orig linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig
---- linux-2.6.12.5/include/linux/pci_ids.h.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,2609 @@
-+/*
-+ * PCI Class, Vendor and Device IDs
-+ *
-+ * Please keep sorted.
-+ */
-+
-+/* Device classes and subclasses */
-+
-+#define PCI_CLASS_NOT_DEFINED 0x0000
-+#define PCI_CLASS_NOT_DEFINED_VGA 0x0001
-+
-+#define PCI_BASE_CLASS_STORAGE 0x01
-+#define PCI_CLASS_STORAGE_SCSI 0x0100
-+#define PCI_CLASS_STORAGE_IDE 0x0101
-+#define PCI_CLASS_STORAGE_FLOPPY 0x0102
-+#define PCI_CLASS_STORAGE_IPI 0x0103
-+#define PCI_CLASS_STORAGE_RAID 0x0104
-+#define PCI_CLASS_STORAGE_OTHER 0x0180
-+
-+#define PCI_BASE_CLASS_NETWORK 0x02
-+#define PCI_CLASS_NETWORK_ETHERNET 0x0200
-+#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201
-+#define PCI_CLASS_NETWORK_FDDI 0x0202
-+#define PCI_CLASS_NETWORK_ATM 0x0203
-+#define PCI_CLASS_NETWORK_OTHER 0x0280
-+
-+#define PCI_BASE_CLASS_DISPLAY 0x03
-+#define PCI_CLASS_DISPLAY_VGA 0x0300
-+#define PCI_CLASS_DISPLAY_XGA 0x0301
-+#define PCI_CLASS_DISPLAY_3D 0x0302
-+#define PCI_CLASS_DISPLAY_OTHER 0x0380
-+
-+#define PCI_BASE_CLASS_MULTIMEDIA 0x04
-+#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400
-+#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401
-+#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402
-+#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480
-+
-+#define PCI_BASE_CLASS_MEMORY 0x05
-+#define PCI_CLASS_MEMORY_RAM 0x0500
-+#define PCI_CLASS_MEMORY_FLASH 0x0501
-+#define PCI_CLASS_MEMORY_OTHER 0x0580
-+
-+#define PCI_BASE_CLASS_BRIDGE 0x06
-+#define PCI_CLASS_BRIDGE_HOST 0x0600
-+#define PCI_CLASS_BRIDGE_ISA 0x0601
-+#define PCI_CLASS_BRIDGE_EISA 0x0602
-+#define PCI_CLASS_BRIDGE_MC 0x0603
-+#define PCI_CLASS_BRIDGE_PCI 0x0604
-+#define PCI_CLASS_BRIDGE_PCMCIA 0x0605
-+#define PCI_CLASS_BRIDGE_NUBUS 0x0606
-+#define PCI_CLASS_BRIDGE_CARDBUS 0x0607
-+#define PCI_CLASS_BRIDGE_RACEWAY 0x0608
-+#define PCI_CLASS_BRIDGE_OTHER 0x0680
-+
-+#define PCI_BASE_CLASS_COMMUNICATION 0x07
-+#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
-+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
-+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
-+#define PCI_CLASS_COMMUNICATION_MODEM 0x0703
-+#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
-+
-+#define PCI_BASE_CLASS_SYSTEM 0x08
-+#define PCI_CLASS_SYSTEM_PIC 0x0800
-+#define PCI_CLASS_SYSTEM_DMA 0x0801
-+#define PCI_CLASS_SYSTEM_TIMER 0x0802
-+#define PCI_CLASS_SYSTEM_RTC 0x0803
-+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804
-+#define PCI_CLASS_SYSTEM_OTHER 0x0880
-+
-+#define PCI_BASE_CLASS_INPUT 0x09
-+#define PCI_CLASS_INPUT_KEYBOARD 0x0900
-+#define PCI_CLASS_INPUT_PEN 0x0901
-+#define PCI_CLASS_INPUT_MOUSE 0x0902
-+#define PCI_CLASS_INPUT_SCANNER 0x0903
-+#define PCI_CLASS_INPUT_GAMEPORT 0x0904
-+#define PCI_CLASS_INPUT_OTHER 0x0980
-+
-+#define PCI_BASE_CLASS_DOCKING 0x0a
-+#define PCI_CLASS_DOCKING_GENERIC 0x0a00
-+#define PCI_CLASS_DOCKING_OTHER 0x0a80
-+
-+#define PCI_BASE_CLASS_PROCESSOR 0x0b
-+#define PCI_CLASS_PROCESSOR_386 0x0b00
-+#define PCI_CLASS_PROCESSOR_486 0x0b01
-+#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02
-+#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10
-+#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
-+#define PCI_CLASS_PROCESSOR_MIPS 0x0b30
-+#define PCI_CLASS_PROCESSOR_CO 0x0b40
-+
-+#define PCI_BASE_CLASS_SERIAL 0x0c
-+#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00
-+#define PCI_CLASS_SERIAL_ACCESS 0x0c01
-+#define PCI_CLASS_SERIAL_SSA 0x0c02
-+#define PCI_CLASS_SERIAL_USB 0x0c03
-+#define PCI_CLASS_SERIAL_FIBER 0x0c04
-+#define PCI_CLASS_SERIAL_SMBUS 0x0c05
-+
-+#define PCI_BASE_CLASS_INTELLIGENT 0x0e
-+#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
-+
-+#define PCI_BASE_CLASS_SATELLITE 0x0f
-+#define PCI_CLASS_SATELLITE_TV 0x0f00
-+#define PCI_CLASS_SATELLITE_AUDIO 0x0f01
-+#define PCI_CLASS_SATELLITE_VOICE 0x0f03
-+#define PCI_CLASS_SATELLITE_DATA 0x0f04
-+
-+#define PCI_BASE_CLASS_CRYPT 0x10
-+#define PCI_CLASS_CRYPT_NETWORK 0x1000
-+#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001
-+#define PCI_CLASS_CRYPT_OTHER 0x1080
-+
-+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
-+#define PCI_CLASS_SP_DPIO 0x1100
-+#define PCI_CLASS_SP_OTHER 0x1180
-+
-+#define PCI_CLASS_OTHERS 0xff
-+
-+/* Vendors and devices. Sort key: vendor first, device next. */
-+
-+#define PCI_VENDOR_ID_DYNALINK 0x0675
-+#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702
-+
-+#define PCI_VENDOR_ID_BERKOM 0x0871
-+#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1
-+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2
-+#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4
-+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8
-+
-+#define PCI_VENDOR_ID_COMPAQ 0x0e11
-+#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508
-+#define PCI_DEVICE_ID_COMPAQ_1280 0x3033
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000
-+#define PCI_DEVICE_ID_COMPAQ_6010 0x6010
-+#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
-+#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32
-+#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011
-+#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060
-+#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178
-+#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46
-+#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150
-+
-+#define PCI_VENDOR_ID_NCR 0x1000
-+#define PCI_VENDOR_ID_LSI_LOGIC 0x1000
-+#define PCI_DEVICE_ID_NCR_53C810 0x0001
-+#define PCI_DEVICE_ID_NCR_53C820 0x0002
-+#define PCI_DEVICE_ID_NCR_53C825 0x0003
-+#define PCI_DEVICE_ID_NCR_53C815 0x0004
-+#define PCI_DEVICE_ID_LSI_53C810AP 0x0005
-+#define PCI_DEVICE_ID_NCR_53C860 0x0006
-+#define PCI_DEVICE_ID_LSI_53C1510 0x000a
-+#define PCI_DEVICE_ID_NCR_53C896 0x000b
-+#define PCI_DEVICE_ID_NCR_53C895 0x000c
-+#define PCI_DEVICE_ID_NCR_53C885 0x000d
-+#define PCI_DEVICE_ID_NCR_53C875 0x000f
-+#define PCI_DEVICE_ID_NCR_53C1510 0x0010
-+#define PCI_DEVICE_ID_LSI_53C895A 0x0012
-+#define PCI_DEVICE_ID_LSI_53C875A 0x0013
-+#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020
-+#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021
-+#define PCI_DEVICE_ID_LSI_53C1030 0x0030
-+#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032
-+#define PCI_DEVICE_ID_LSI_53C1035 0x0040
-+#define PCI_DEVICE_ID_NCR_53C875J 0x008f
-+#define PCI_DEVICE_ID_LSI_FC909 0x0621
-+#define PCI_DEVICE_ID_LSI_FC929 0x0622
-+#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623
-+#define PCI_DEVICE_ID_LSI_FC919 0x0624
-+#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625
-+#define PCI_DEVICE_ID_LSI_FC929X 0x0626
-+#define PCI_DEVICE_ID_LSI_FC939X 0x0642
-+#define PCI_DEVICE_ID_LSI_FC949X 0x0640
-+#define PCI_DEVICE_ID_LSI_FC919X 0x0628
-+#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701
-+#define PCI_DEVICE_ID_LSI_61C102 0x0901
-+#define PCI_DEVICE_ID_LSI_63C815 0x1000
-+#define PCI_DEVICE_ID_LSI_SAS1064 0x0050
-+#define PCI_DEVICE_ID_LSI_SAS1066 0x005E
-+#define PCI_DEVICE_ID_LSI_SAS1068 0x0054
-+#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C
-+#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056
-+#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A
-+#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058
-+#define PCI_DEVICE_ID_LSI_SAS1078 0x0060
-+
-+#define PCI_VENDOR_ID_ATI 0x1002
-+/* Mach64 */
-+#define PCI_DEVICE_ID_ATI_68800 0x4158
-+#define PCI_DEVICE_ID_ATI_215CT222 0x4354
-+#define PCI_DEVICE_ID_ATI_210888CX 0x4358
-+#define PCI_DEVICE_ID_ATI_215ET222 0x4554
-+/* Mach64 / Rage */
-+#define PCI_DEVICE_ID_ATI_215GB 0x4742
-+#define PCI_DEVICE_ID_ATI_215GD 0x4744
-+#define PCI_DEVICE_ID_ATI_215GI 0x4749
-+#define PCI_DEVICE_ID_ATI_215GP 0x4750
-+#define PCI_DEVICE_ID_ATI_215GQ 0x4751
-+#define PCI_DEVICE_ID_ATI_215XL 0x4752
-+#define PCI_DEVICE_ID_ATI_215GT 0x4754
-+#define PCI_DEVICE_ID_ATI_215GTB 0x4755
-+#define PCI_DEVICE_ID_ATI_215_IV 0x4756
-+#define PCI_DEVICE_ID_ATI_215_IW 0x4757
-+#define PCI_DEVICE_ID_ATI_215_IZ 0x475A
-+#define PCI_DEVICE_ID_ATI_210888GX 0x4758
-+#define PCI_DEVICE_ID_ATI_215_LB 0x4c42
-+#define PCI_DEVICE_ID_ATI_215_LD 0x4c44
-+#define PCI_DEVICE_ID_ATI_215_LG 0x4c47
-+#define PCI_DEVICE_ID_ATI_215_LI 0x4c49
-+#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D
-+#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E
-+#define PCI_DEVICE_ID_ATI_215_LR 0x4c52
-+#define PCI_DEVICE_ID_ATI_215_LS 0x4c53
-+#define PCI_DEVICE_ID_ATI_264_LT 0x4c54
-+/* Mach64 VT */
-+#define PCI_DEVICE_ID_ATI_264VT 0x5654
-+#define PCI_DEVICE_ID_ATI_264VU 0x5655
-+#define PCI_DEVICE_ID_ATI_264VV 0x5656
-+/* Rage128 GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245
-+#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246
-+#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247
-+/* Rage128 VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b
-+#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345
-+#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346
-+#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347
-+#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348
-+#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b
-+#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d
-+#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e
-+/* Rage128 Ultra */
-+#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446
-+#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453
-+#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454
-+#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455
-+/* Rage128 M3 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45
-+#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46
-+#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c
-+/* Rage128 Pro GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041
-+#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042
-+#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043
-+#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044
-+#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045
-+#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046
-+/* Rage128 Pro VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047
-+#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048
-+#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049
-+#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A
-+#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B
-+#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C
-+#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D
-+#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E
-+#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F
-+#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050
-+#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051
-+#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053
-+#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054
-+#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055
-+#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056
-+#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057
-+#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45
-+#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46
-+/* Radeon R100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147
-+/* Radeon RV100 (VE) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a
-+/* Radeon R200 (8500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c
-+#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e
-+#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f
-+#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c
-+#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242
-+/* Radeon R200 (9100) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d
-+/* Radeon RV200 (7500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157
-+#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158
-+/* Radeon NV-100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a
-+/* Radeon RV250 (9000) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964
-+#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965
-+#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966
-+#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967
-+/* Radeon RV280 (9200) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960
-+#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961
-+#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964
-+/* Radeon R300 (9500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144
-+/* Radeon R300 (9700) */
-+#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44
-+#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45
-+#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46
-+#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47
-+#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145
-+#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146
-+/* Radeon R350 (9800) */
-+#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48
-+#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49
-+/* Radeon RV350 (9600) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150
-+#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152
-+/* Radeon M6 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59
-+#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a
-+/* Radeon M7 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57
-+#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58
-+/* Radeon M9 */
-+#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64
-+#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65
-+#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66
-+#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67
-+/* Radeon */
-+#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147
-+/* RadeonIGP */
-+#define PCI_DEVICE_ID_ATI_RS100 0xcab0
-+#define PCI_DEVICE_ID_ATI_RS200 0xcab2
-+#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2
-+#define PCI_DEVICE_ID_ATI_RS250 0xcab3
-+#define PCI_DEVICE_ID_ATI_RS300_100 0x5830
-+#define PCI_DEVICE_ID_ATI_RS300_133 0x5831
-+#define PCI_DEVICE_ID_ATI_RS300_166 0x5832
-+#define PCI_DEVICE_ID_ATI_RS300_200 0x5833
-+#define PCI_DEVICE_ID_ATI_RS350_100 0x7830
-+#define PCI_DEVICE_ID_ATI_RS350_133 0x7831
-+#define PCI_DEVICE_ID_ATI_RS350_166 0x7832
-+#define PCI_DEVICE_ID_ATI_RS350_200 0x7833
-+#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30
-+#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31
-+#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32
-+#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33
-+#define PCI_DEVICE_ID_ATI_RS480 0x5950
-+/* ATI IXP Chipset */
-+#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349
-+#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369
-+#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e
-+#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376
-+#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379
-+
-+#define PCI_VENDOR_ID_VLSI 0x1004
-+#define PCI_DEVICE_ID_VLSI_82C592 0x0005
-+#define PCI_DEVICE_ID_VLSI_82C593 0x0006
-+#define PCI_DEVICE_ID_VLSI_82C594 0x0007
-+#define PCI_DEVICE_ID_VLSI_82C597 0x0009
-+#define PCI_DEVICE_ID_VLSI_82C541 0x000c
-+#define PCI_DEVICE_ID_VLSI_82C543 0x000d
-+#define PCI_DEVICE_ID_VLSI_82C532 0x0101
-+#define PCI_DEVICE_ID_VLSI_82C534 0x0102
-+#define PCI_DEVICE_ID_VLSI_82C535 0x0104
-+#define PCI_DEVICE_ID_VLSI_82C147 0x0105
-+#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702
-+
-+#define PCI_VENDOR_ID_ADL 0x1005
-+#define PCI_DEVICE_ID_ADL_2301 0x2301
-+
-+#define PCI_VENDOR_ID_NS 0x100b
-+#define PCI_DEVICE_ID_NS_87415 0x0002
-+#define PCI_DEVICE_ID_NS_87560_LIO 0x000e
-+#define PCI_DEVICE_ID_NS_87560_USB 0x0012
-+#define PCI_DEVICE_ID_NS_83815 0x0020
-+#define PCI_DEVICE_ID_NS_83820 0x0022
-+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500
-+#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501
-+#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502
-+#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503
-+#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504
-+#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505
-+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510
-+#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511
-+#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
-+#define PCI_DEVICE_ID_NS_87410 0xd001
-+
-+#define PCI_VENDOR_ID_TSENG 0x100c
-+#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
-+#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205
-+#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206
-+#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207
-+#define PCI_DEVICE_ID_TSENG_ET6000 0x3208
-+
-+#define PCI_VENDOR_ID_WEITEK 0x100e
-+#define PCI_DEVICE_ID_WEITEK_P9000 0x9001
-+#define PCI_DEVICE_ID_WEITEK_P9100 0x9100
-+
-+#define PCI_VENDOR_ID_DEC 0x1011
-+#define PCI_DEVICE_ID_DEC_BRD 0x0001
-+#define PCI_DEVICE_ID_DEC_TULIP 0x0002
-+#define PCI_DEVICE_ID_DEC_TGA 0x0004
-+#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009
-+#define PCI_DEVICE_ID_DEC_TGA2 0x000D
-+#define PCI_DEVICE_ID_DEC_FDDI 0x000F
-+#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014
-+#define PCI_DEVICE_ID_DEC_21142 0x0019
-+#define PCI_DEVICE_ID_DEC_21052 0x0021
-+#define PCI_DEVICE_ID_DEC_21150 0x0022
-+#define PCI_DEVICE_ID_DEC_21152 0x0024
-+#define PCI_DEVICE_ID_DEC_21153 0x0025
-+#define PCI_DEVICE_ID_DEC_21154 0x0026
-+#define PCI_DEVICE_ID_DEC_21285 0x1065
-+#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046
-+
-+#define PCI_VENDOR_ID_CIRRUS 0x1013
-+#define PCI_DEVICE_ID_CIRRUS_7548 0x0038
-+#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0
-+#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4
-+#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8
-+#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac
-+#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8
-+#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc
-+#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0
-+#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4
-+#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6
-+#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
-+#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
-+#define PCI_DEVICE_ID_CIRRUS_7542 0x1200
-+#define PCI_DEVICE_ID_CIRRUS_7543 0x1202
-+#define PCI_DEVICE_ID_CIRRUS_7541 0x1204
-+
-+#define PCI_VENDOR_ID_IBM 0x1014
-+#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a
-+#define PCI_DEVICE_ID_IBM_TR 0x0018
-+#define PCI_DEVICE_ID_IBM_82G2675 0x001d
-+#define PCI_DEVICE_ID_IBM_MCA 0x0020
-+#define PCI_DEVICE_ID_IBM_82351 0x0022
-+#define PCI_DEVICE_ID_IBM_PYTHON 0x002d
-+#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e
-+#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e
-+#define PCI_DEVICE_ID_IBM_MPIC 0x0046
-+#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d
-+#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105
-+#define PCI_DEVICE_ID_IBM_405GP 0x0156
-+#define PCI_DEVICE_ID_IBM_SNIPE 0x0180
-+#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd
-+#define PCI_DEVICE_ID_IBM_CITRINE 0x028C
-+#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166
-+#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251
-+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
-+
-+#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)"
-+#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005
-+
-+#define PCI_VENDOR_ID_WD 0x101c
-+#define PCI_DEVICE_ID_WD_7197 0x3296
-+#define PCI_DEVICE_ID_WD_90C 0xc24a
-+
-+#define PCI_VENDOR_ID_AMI 0x101e
-+#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960
-+#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010
-+#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060
-+
-+#define PCI_VENDOR_ID_AMD 0x1022
-+#define PCI_DEVICE_ID_AMD_LANCE 0x2000
-+#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
-+#define PCI_DEVICE_ID_AMD_SCSI 0x2020
-+#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F
-+#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400
-+#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401
-+#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403
-+#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404
-+#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408
-+#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409
-+#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B
-+#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C
-+#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410
-+#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411
-+#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413
-+#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414
-+#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440
-+# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440
-+#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441
-+# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441
-+#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443
-+# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443
-+#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445
-+#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448
-+# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448
-+#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449
-+# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449
-+#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462
-+#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468
-+#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b
-+#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d
-+#define PCI_DEVICE_ID_AMD_8151_0 0x7454
-+#define PCI_DEVICE_ID_AMD_8131_APIC 0x7450
-+
-+#define PCI_VENDOR_ID_TRIDENT 0x1023
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001
-+#define PCI_DEVICE_ID_TRIDENT_9320 0x9320
-+#define PCI_DEVICE_ID_TRIDENT_9388 0x9388
-+#define PCI_DEVICE_ID_TRIDENT_9397 0x9397
-+#define PCI_DEVICE_ID_TRIDENT_939A 0x939A
-+#define PCI_DEVICE_ID_TRIDENT_9520 0x9520
-+#define PCI_DEVICE_ID_TRIDENT_9525 0x9525
-+#define PCI_DEVICE_ID_TRIDENT_9420 0x9420
-+#define PCI_DEVICE_ID_TRIDENT_9440 0x9440
-+#define PCI_DEVICE_ID_TRIDENT_9660 0x9660
-+#define PCI_DEVICE_ID_TRIDENT_9750 0x9750
-+#define PCI_DEVICE_ID_TRIDENT_9850 0x9850
-+#define PCI_DEVICE_ID_TRIDENT_9880 0x9880
-+#define PCI_DEVICE_ID_TRIDENT_8400 0x8400
-+#define PCI_DEVICE_ID_TRIDENT_8420 0x8420
-+#define PCI_DEVICE_ID_TRIDENT_8500 0x8500
-+
-+#define PCI_VENDOR_ID_AI 0x1025
-+#define PCI_DEVICE_ID_AI_M1435 0x1435
-+
-+#define PCI_VENDOR_ID_DELL 0x1028
-+#define PCI_DEVICE_ID_DELL_RACIII 0x0008
-+#define PCI_DEVICE_ID_DELL_RAC4 0x0012
-+
-+#define PCI_VENDOR_ID_MATROX 0x102B
-+#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518
-+#define PCI_DEVICE_ID_MATROX_MIL 0x0519
-+#define PCI_DEVICE_ID_MATROX_MYS 0x051A
-+#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b
-+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f
-+#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10
-+#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000
-+#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001
-+#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
-+#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
-+#define PCI_DEVICE_ID_MATROX_G400 0x0525
-+#define PCI_DEVICE_ID_MATROX_G550 0x2527
-+#define PCI_DEVICE_ID_MATROX_VIA 0x4536
-+
-+#define PCI_VENDOR_ID_CT 0x102c
-+#define PCI_DEVICE_ID_CT_69000 0x00c0
-+#define PCI_DEVICE_ID_CT_65545 0x00d8
-+#define PCI_DEVICE_ID_CT_65548 0x00dc
-+#define PCI_DEVICE_ID_CT_65550 0x00e0
-+#define PCI_DEVICE_ID_CT_65554 0x00e4
-+#define PCI_DEVICE_ID_CT_65555 0x00e5
-+
-+#define PCI_VENDOR_ID_MIRO 0x1031
-+#define PCI_DEVICE_ID_MIRO_36050 0x5601
-+#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe
-+#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801
-+
-+#define PCI_VENDOR_ID_NEC 0x1033
-+#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */
-+#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */
-+#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */
-+#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */
-+#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */
-+#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */
-+#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */
-+#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b
-+#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e
-+#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */
-+#define PCI_DEVICE_ID_NEC_NILE4 0x005a
-+#define PCI_DEVICE_ID_NEC_VRC5476 0x009b
-+#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5
-+#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6
-+#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */
-+#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */
-+
-+#define PCI_VENDOR_ID_FD 0x1036
-+#define PCI_DEVICE_ID_FD_36C70 0x0000
-+
-+#define PCI_VENDOR_ID_SI 0x1039
-+#define PCI_DEVICE_ID_SI_5591_AGP 0x0001
-+#define PCI_DEVICE_ID_SI_6202 0x0002
-+#define PCI_DEVICE_ID_SI_503 0x0008
-+#define PCI_DEVICE_ID_SI_ACPI 0x0009
-+#define PCI_DEVICE_ID_SI_SMBUS 0x0016
-+#define PCI_DEVICE_ID_SI_LPC 0x0018
-+#define PCI_DEVICE_ID_SI_5597_VGA 0x0200
-+#define PCI_DEVICE_ID_SI_6205 0x0205
-+#define PCI_DEVICE_ID_SI_501 0x0406
-+#define PCI_DEVICE_ID_SI_496 0x0496
-+#define PCI_DEVICE_ID_SI_300 0x0300
-+#define PCI_DEVICE_ID_SI_315H 0x0310
-+#define PCI_DEVICE_ID_SI_315 0x0315
-+#define PCI_DEVICE_ID_SI_315PRO 0x0325
-+#define PCI_DEVICE_ID_SI_530 0x0530
-+#define PCI_DEVICE_ID_SI_540 0x0540
-+#define PCI_DEVICE_ID_SI_550 0x0550
-+#define PCI_DEVICE_ID_SI_540_VGA 0x5300
-+#define PCI_DEVICE_ID_SI_550_VGA 0x5315
-+#define PCI_DEVICE_ID_SI_601 0x0601
-+#define PCI_DEVICE_ID_SI_620 0x0620
-+#define PCI_DEVICE_ID_SI_630 0x0630
-+#define PCI_DEVICE_ID_SI_633 0x0633
-+#define PCI_DEVICE_ID_SI_635 0x0635
-+#define PCI_DEVICE_ID_SI_640 0x0640
-+#define PCI_DEVICE_ID_SI_645 0x0645
-+#define PCI_DEVICE_ID_SI_646 0x0646
-+#define PCI_DEVICE_ID_SI_648 0x0648
-+#define PCI_DEVICE_ID_SI_650 0x0650
-+#define PCI_DEVICE_ID_SI_651 0x0651
-+#define PCI_DEVICE_ID_SI_652 0x0652
-+#define PCI_DEVICE_ID_SI_655 0x0655
-+#define PCI_DEVICE_ID_SI_661 0x0661
-+#define PCI_DEVICE_ID_SI_730 0x0730
-+#define PCI_DEVICE_ID_SI_733 0x0733
-+#define PCI_DEVICE_ID_SI_630_VGA 0x6300
-+#define PCI_DEVICE_ID_SI_730_VGA 0x7300
-+#define PCI_DEVICE_ID_SI_735 0x0735
-+#define PCI_DEVICE_ID_SI_740 0x0740
-+#define PCI_DEVICE_ID_SI_741 0x0741
-+#define PCI_DEVICE_ID_SI_745 0x0745
-+#define PCI_DEVICE_ID_SI_746 0x0746
-+#define PCI_DEVICE_ID_SI_748 0x0748
-+#define PCI_DEVICE_ID_SI_750 0x0750
-+#define PCI_DEVICE_ID_SI_751 0x0751
-+#define PCI_DEVICE_ID_SI_752 0x0752
-+#define PCI_DEVICE_ID_SI_755 0x0755
-+#define PCI_DEVICE_ID_SI_760 0x0760
-+#define PCI_DEVICE_ID_SI_900 0x0900
-+#define PCI_DEVICE_ID_SI_961 0x0961
-+#define PCI_DEVICE_ID_SI_962 0x0962
-+#define PCI_DEVICE_ID_SI_963 0x0963
-+#define PCI_DEVICE_ID_SI_5107 0x5107
-+#define PCI_DEVICE_ID_SI_5300 0x5300
-+#define PCI_DEVICE_ID_SI_5511 0x5511
-+#define PCI_DEVICE_ID_SI_5513 0x5513
-+#define PCI_DEVICE_ID_SI_5518 0x5518
-+#define PCI_DEVICE_ID_SI_5571 0x5571
-+#define PCI_DEVICE_ID_SI_5581 0x5581
-+#define PCI_DEVICE_ID_SI_5582 0x5582
-+#define PCI_DEVICE_ID_SI_5591 0x5591
-+#define PCI_DEVICE_ID_SI_5596 0x5596
-+#define PCI_DEVICE_ID_SI_5597 0x5597
-+#define PCI_DEVICE_ID_SI_5598 0x5598
-+#define PCI_DEVICE_ID_SI_5600 0x5600
-+#define PCI_DEVICE_ID_SI_6300 0x6300
-+#define PCI_DEVICE_ID_SI_6306 0x6306
-+#define PCI_DEVICE_ID_SI_6326 0x6326
-+#define PCI_DEVICE_ID_SI_7001 0x7001
-+#define PCI_DEVICE_ID_SI_7012 0x7012
-+#define PCI_DEVICE_ID_SI_7016 0x7016
-+
-+#define PCI_VENDOR_ID_HP 0x103c
-+#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a
-+#define PCI_DEVICE_ID_HP_TACHYON 0x1028
-+#define PCI_DEVICE_ID_HP_TACHLITE 0x1029
-+#define PCI_DEVICE_ID_HP_J2585A 0x1030
-+#define PCI_DEVICE_ID_HP_J2585B 0x1031
-+#define PCI_DEVICE_ID_HP_J2973A 0x1040
-+#define PCI_DEVICE_ID_HP_J2970A 0x1042
-+#define PCI_DEVICE_ID_HP_DIVA 0x1048
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A
-+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B
-+#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054
-+#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0
-+#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b
-+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223
-+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226
-+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227
-+#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229
-+#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
-+#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e
-+#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c
-+#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282
-+#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
-+#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
-+#define PCI_DEVICE_ID_HP_CISSA 0x3220
-+#define PCI_DEVICE_ID_HP_CISSB 0x3230
-+#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
-+
-+#define PCI_VENDOR_ID_PCTECH 0x1042
-+#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
-+#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
-+
-+#define PCI_VENDOR_ID_ASUSTEK 0x1043
-+#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675
-+
-+#define PCI_VENDOR_ID_DPT 0x1044
-+#define PCI_DEVICE_ID_DPT 0xa400
-+
-+#define PCI_VENDOR_ID_OPTI 0x1045
-+#define PCI_DEVICE_ID_OPTI_92C178 0xc178
-+#define PCI_DEVICE_ID_OPTI_82C557 0xc557
-+#define PCI_DEVICE_ID_OPTI_82C558 0xc558
-+#define PCI_DEVICE_ID_OPTI_82C621 0xc621
-+#define PCI_DEVICE_ID_OPTI_82C700 0xc700
-+#define PCI_DEVICE_ID_OPTI_82C701 0xc701
-+#define PCI_DEVICE_ID_OPTI_82C814 0xc814
-+#define PCI_DEVICE_ID_OPTI_82C822 0xc822
-+#define PCI_DEVICE_ID_OPTI_82C861 0xc861
-+#define PCI_DEVICE_ID_OPTI_82C825 0xd568
-+
-+#define PCI_VENDOR_ID_ELSA 0x1048
-+#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
-+#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
-+
-+#define PCI_VENDOR_ID_SGS 0x104a
-+#define PCI_DEVICE_ID_SGS_2000 0x0008
-+#define PCI_DEVICE_ID_SGS_1764 0x0009
-+
-+#define PCI_VENDOR_ID_BUSLOGIC 0x104B
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040
-+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130
-+
-+#define PCI_VENDOR_ID_TI 0x104c
-+#define PCI_DEVICE_ID_TI_TVP4010 0x3d04
-+#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
-+#define PCI_DEVICE_ID_TI_4450 0x8011
-+#define PCI_DEVICE_ID_TI_1130 0xac12
-+#define PCI_DEVICE_ID_TI_1031 0xac13
-+#define PCI_DEVICE_ID_TI_1131 0xac15
-+#define PCI_DEVICE_ID_TI_1250 0xac16
-+#define PCI_DEVICE_ID_TI_1220 0xac17
-+#define PCI_DEVICE_ID_TI_1221 0xac19
-+#define PCI_DEVICE_ID_TI_1210 0xac1a
-+#define PCI_DEVICE_ID_TI_1450 0xac1b
-+#define PCI_DEVICE_ID_TI_1225 0xac1c
-+#define PCI_DEVICE_ID_TI_1251A 0xac1d
-+#define PCI_DEVICE_ID_TI_1211 0xac1e
-+#define PCI_DEVICE_ID_TI_1251B 0xac1f
-+#define PCI_DEVICE_ID_TI_4410 0xac41
-+#define PCI_DEVICE_ID_TI_4451 0xac42
-+#define PCI_DEVICE_ID_TI_4510 0xac44
-+#define PCI_DEVICE_ID_TI_4520 0xac46
-+#define PCI_DEVICE_ID_TI_1410 0xac50
-+#define PCI_DEVICE_ID_TI_1420 0xac51
-+#define PCI_DEVICE_ID_TI_1451A 0xac52
-+#define PCI_DEVICE_ID_TI_1620 0xac54
-+#define PCI_DEVICE_ID_TI_1520 0xac55
-+#define PCI_DEVICE_ID_TI_1510 0xac56
-+
-+#define PCI_VENDOR_ID_SONY 0x104d
-+#define PCI_DEVICE_ID_SONY_CXD3222 0x8039
-+
-+#define PCI_VENDOR_ID_OAK 0x104e
-+#define PCI_DEVICE_ID_OAK_OTI107 0x0107
-+
-+/* Winbond have two vendor IDs! See 0x10ad as well */
-+#define PCI_VENDOR_ID_WINBOND2 0x1050
-+#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940
-+#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
-+#define PCI_DEVICE_ID_WINBOND2_6692 0x6692
-+
-+#define PCI_VENDOR_ID_ANIGMA 0x1051
-+#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100
-+
-+#define PCI_VENDOR_ID_EFAR 0x1055
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463
-+
-+#define PCI_VENDOR_ID_MOTOROLA 0x1057
-+#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507
-+#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001
-+#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002
-+#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004
-+#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801
-+#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802
-+#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803
-+#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806
-+#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b
-+#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803
-+
-+#define PCI_VENDOR_ID_PROMISE 0x105a
-+#define PCI_DEVICE_ID_PROMISE_20265 0x0d30
-+#define PCI_DEVICE_ID_PROMISE_20267 0x4d30
-+#define PCI_DEVICE_ID_PROMISE_20246 0x4d33
-+#define PCI_DEVICE_ID_PROMISE_20262 0x4d38
-+#define PCI_DEVICE_ID_PROMISE_20263 0x0D38
-+#define PCI_DEVICE_ID_PROMISE_20268 0x4d68
-+#define PCI_DEVICE_ID_PROMISE_20268R 0x6268
-+#define PCI_DEVICE_ID_PROMISE_20269 0x4d69
-+#define PCI_DEVICE_ID_PROMISE_20270 0x6268
-+#define PCI_DEVICE_ID_PROMISE_20271 0x6269
-+#define PCI_DEVICE_ID_PROMISE_20275 0x1275
-+#define PCI_DEVICE_ID_PROMISE_20276 0x5275
-+#define PCI_DEVICE_ID_PROMISE_20277 0x7275
-+#define PCI_DEVICE_ID_PROMISE_5300 0x5300
-+
-+#define PCI_VENDOR_ID_N9 0x105d
-+#define PCI_DEVICE_ID_N9_I128 0x2309
-+#define PCI_DEVICE_ID_N9_I128_2 0x2339
-+#define PCI_DEVICE_ID_N9_I128_T2R 0x493d
-+
-+#define PCI_VENDOR_ID_UMC 0x1060
-+#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
-+#define PCI_DEVICE_ID_UMC_UM8891A 0x0891
-+#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
-+#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
-+#define PCI_DEVICE_ID_UMC_UM8881F 0x8881
-+#define PCI_DEVICE_ID_UMC_UM8886F 0x8886
-+#define PCI_DEVICE_ID_UMC_UM9017F 0x9017
-+#define PCI_DEVICE_ID_UMC_UM8886N 0xe886
-+#define PCI_DEVICE_ID_UMC_UM8891N 0xe891
-+
-+#define PCI_VENDOR_ID_X 0x1061
-+#define PCI_DEVICE_ID_X_AGX016 0x0001
-+
-+#define PCI_VENDOR_ID_MYLEX 0x1069
-+#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050
-+#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
-+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
-+
-+#define PCI_VENDOR_ID_PICOP 0x1066
-+#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001
-+#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002
-+
-+#define PCI_VENDOR_ID_APPLE 0x106b
-+#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
-+#define PCI_DEVICE_ID_APPLE_GC 0x0002
-+#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018
-+#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025
-+#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d
-+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032
-+#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034
-+#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e
-+#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043
-+#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b
-+#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c
-+#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050
-+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051
-+#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052
-+#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
-+#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
-+#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645
-+
-+#define PCI_VENDOR_ID_YAMAHA 0x1073
-+#define PCI_DEVICE_ID_YAMAHA_724 0x0004
-+#define PCI_DEVICE_ID_YAMAHA_724F 0x000d
-+#define PCI_DEVICE_ID_YAMAHA_740 0x000a
-+#define PCI_DEVICE_ID_YAMAHA_740C 0x000c
-+#define PCI_DEVICE_ID_YAMAHA_744 0x0010
-+#define PCI_DEVICE_ID_YAMAHA_754 0x0012
-+
-+#define PCI_VENDOR_ID_NEXGEN 0x1074
-+#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78
-+
-+#define PCI_VENDOR_ID_QLOGIC 0x1077
-+#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
-+#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022
-+#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100
-+#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200
-+
-+#define PCI_VENDOR_ID_CYRIX 0x1078
-+#define PCI_DEVICE_ID_CYRIX_5510 0x0000
-+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001
-+#define PCI_DEVICE_ID_CYRIX_5520 0x0002
-+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100
-+#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101
-+#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102
-+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
-+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
-+
-+#define PCI_VENDOR_ID_LEADTEK 0x107d
-+#define PCI_DEVICE_ID_LEADTEK_805 0x0000
-+
-+#define PCI_VENDOR_ID_INTERPHASE 0x107e
-+#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004
-+#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005
-+#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008
-+
-+#define PCI_VENDOR_ID_CONTAQ 0x1080
-+#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600
-+#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
-+
-+#define PCI_VENDOR_ID_FOREX 0x1083
-+
-+#define PCI_VENDOR_ID_OLICOM 0x108d
-+#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001
-+#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011
-+#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
-+#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
-+#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014
-+#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021
-+
-+#define PCI_VENDOR_ID_SUN 0x108e
-+#define PCI_DEVICE_ID_SUN_EBUS 0x1000
-+#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001
-+#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100
-+#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101
-+#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102
-+#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103
-+#define PCI_DEVICE_ID_SUN_GEM 0x2bad
-+#define PCI_DEVICE_ID_SUN_SIMBA 0x5000
-+#define PCI_DEVICE_ID_SUN_PBM 0x8000
-+#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001
-+#define PCI_DEVICE_ID_SUN_SABRE 0xa000
-+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001
-+#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801
-+
-+#define PCI_VENDOR_ID_CMD 0x1095
-+#define PCI_DEVICE_ID_CMD_640 0x0640
-+#define PCI_DEVICE_ID_CMD_643 0x0643
-+#define PCI_DEVICE_ID_CMD_646 0x0646
-+#define PCI_DEVICE_ID_CMD_647 0x0647
-+#define PCI_DEVICE_ID_CMD_648 0x0648
-+#define PCI_DEVICE_ID_CMD_649 0x0649
-+#define PCI_DEVICE_ID_CMD_670 0x0670
-+#define PCI_DEVICE_ID_CMD_680 0x0680
-+
-+#define PCI_DEVICE_ID_SII_680 0x0680
-+#define PCI_DEVICE_ID_SII_3112 0x3112
-+#define PCI_DEVICE_ID_SII_1210SA 0x0240
-+
-+#define PCI_VENDOR_ID_VISION 0x1098
-+#define PCI_DEVICE_ID_VISION_QD8500 0x0001
-+#define PCI_DEVICE_ID_VISION_QD8580 0x0002
-+
-+#define PCI_VENDOR_ID_BROOKTREE 0x109e
-+#define PCI_DEVICE_ID_BROOKTREE_848 0x0350
-+#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351
-+#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e
-+#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
-+#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474
-+
-+#define PCI_VENDOR_ID_SIERRA 0x10a8
-+#define PCI_DEVICE_ID_SIERRA_STB 0x0000
-+
-+#define PCI_VENDOR_ID_SGI 0x10a9
-+#define PCI_DEVICE_ID_SGI_IOC3 0x0003
-+#define PCI_DEVICE_ID_SGI_IOC4 0x100a
-+#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002
-+
-+#define PCI_VENDOR_ID_ACC 0x10aa
-+#define PCI_DEVICE_ID_ACC_2056 0x0000
-+
-+#define PCI_VENDOR_ID_WINBOND 0x10ad
-+#define PCI_DEVICE_ID_WINBOND_83769 0x0001
-+#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
-+#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
-+
-+#define PCI_VENDOR_ID_DATABOOK 0x10b3
-+#define PCI_DEVICE_ID_DATABOOK_87144 0xb106
-+
-+#define PCI_VENDOR_ID_PLX 0x10b5
-+#define PCI_DEVICE_ID_PLX_R685 0x1030
-+#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a
-+#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076
-+#define PCI_DEVICE_ID_PLX_1077 0x1077
-+#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103
-+#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
-+#define PCI_DEVICE_ID_PLX_R753 0x1152
-+#define PCI_DEVICE_ID_PLX_9030 0x9030
-+#define PCI_DEVICE_ID_PLX_9050 0x9050
-+#define PCI_DEVICE_ID_PLX_9060 0x9060
-+#define PCI_DEVICE_ID_PLX_9060ES 0x906E
-+#define PCI_DEVICE_ID_PLX_9060SD 0x906D
-+#define PCI_DEVICE_ID_PLX_9080 0x9080
-+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
-+
-+#define PCI_VENDOR_ID_MADGE 0x10b6
-+#define PCI_DEVICE_ID_MADGE_MK2 0x0002
-+#define PCI_DEVICE_ID_MADGE_C155S 0x1001
-+
-+#define PCI_VENDOR_ID_3COM 0x10b7
-+#define PCI_DEVICE_ID_3COM_3C985 0x0001
-+#define PCI_DEVICE_ID_3COM_3C940 0x1700
-+#define PCI_DEVICE_ID_3COM_3C339 0x3390
-+#define PCI_DEVICE_ID_3COM_3C359 0x3590
-+#define PCI_DEVICE_ID_3COM_3C590 0x5900
-+#define PCI_DEVICE_ID_3COM_3C595TX 0x5950
-+#define PCI_DEVICE_ID_3COM_3C595T4 0x5951
-+#define PCI_DEVICE_ID_3COM_3C595MII 0x5952
-+#define PCI_DEVICE_ID_3COM_3C940B 0x80eb
-+#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000
-+#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001
-+#define PCI_DEVICE_ID_3COM_3C905TX 0x9050
-+#define PCI_DEVICE_ID_3COM_3C905T4 0x9051
-+#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055
-+#define PCI_DEVICE_ID_3COM_3CR990 0x9900
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903
-+#define PCI_DEVICE_ID_3COM_3CR990B 0x9904
-+#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905
-+#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908
-+#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
-+#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
-+
-+#define PCI_VENDOR_ID_SMC 0x10b8
-+#define PCI_DEVICE_ID_SMC_EPIC100 0x0005
-+
-+#define PCI_VENDOR_ID_AL 0x10b9
-+#define PCI_DEVICE_ID_AL_M1445 0x1445
-+#define PCI_DEVICE_ID_AL_M1449 0x1449
-+#define PCI_DEVICE_ID_AL_M1451 0x1451
-+#define PCI_DEVICE_ID_AL_M1461 0x1461
-+#define PCI_DEVICE_ID_AL_M1489 0x1489
-+#define PCI_DEVICE_ID_AL_M1511 0x1511
-+#define PCI_DEVICE_ID_AL_M1513 0x1513
-+#define PCI_DEVICE_ID_AL_M1521 0x1521
-+#define PCI_DEVICE_ID_AL_M1523 0x1523
-+#define PCI_DEVICE_ID_AL_M1531 0x1531
-+#define PCI_DEVICE_ID_AL_M1533 0x1533
-+#define PCI_DEVICE_ID_AL_M1535 0x1535
-+#define PCI_DEVICE_ID_AL_M1541 0x1541
-+#define PCI_DEVICE_ID_AL_M1543 0x1543
-+#define PCI_DEVICE_ID_AL_M1563 0x1563
-+#define PCI_DEVICE_ID_AL_M1621 0x1621
-+#define PCI_DEVICE_ID_AL_M1631 0x1631
-+#define PCI_DEVICE_ID_AL_M1632 0x1632
-+#define PCI_DEVICE_ID_AL_M1641 0x1641
-+#define PCI_DEVICE_ID_AL_M1644 0x1644
-+#define PCI_DEVICE_ID_AL_M1647 0x1647
-+#define PCI_DEVICE_ID_AL_M1651 0x1651
-+#define PCI_DEVICE_ID_AL_M1671 0x1671
-+#define PCI_DEVICE_ID_AL_M1681 0x1681
-+#define PCI_DEVICE_ID_AL_M1683 0x1683
-+#define PCI_DEVICE_ID_AL_M1689 0x1689
-+#define PCI_DEVICE_ID_AL_M3307 0x3307
-+#define PCI_DEVICE_ID_AL_M4803 0x5215
-+#define PCI_DEVICE_ID_AL_M5219 0x5219
-+#define PCI_DEVICE_ID_AL_M5228 0x5228
-+#define PCI_DEVICE_ID_AL_M5229 0x5229
-+#define PCI_DEVICE_ID_AL_M5237 0x5237
-+#define PCI_DEVICE_ID_AL_M5243 0x5243
-+#define PCI_DEVICE_ID_AL_M5451 0x5451
-+#define PCI_DEVICE_ID_AL_M7101 0x7101
-+
-+#define PCI_VENDOR_ID_MITSUBISHI 0x10ba
-+
-+#define PCI_VENDOR_ID_SURECOM 0x10bd
-+#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34
-+
-+#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083
-+
-+#define PCI_VENDOR_ID_ASP 0x10cd
-+#define PCI_DEVICE_ID_ASP_ABP940 0x1200
-+#define PCI_DEVICE_ID_ASP_ABP940U 0x1300
-+#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300
-+
-+#define PCI_VENDOR_ID_MACRONIX 0x10d9
-+#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512
-+#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531
-+
-+#define PCI_VENDOR_ID_TCONRAD 0x10da
-+#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
-+
-+#define PCI_VENDOR_ID_CERN 0x10dc
-+#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001
-+#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002
-+#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021
-+#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022
-+
-+#define PCI_VENDOR_ID_NVIDIA 0x10de
-+#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
-+#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
-+#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029
-+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a
-+#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C
-+#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057
-+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066
-+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e
-+#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0
-+#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1
-+#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9
-+#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc
-+#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B
-+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4
-+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269
-+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E
-+
-+#define PCI_VENDOR_ID_IMS 0x10e0
-+#define PCI_DEVICE_ID_IMS_8849 0x8849
-+#define PCI_DEVICE_ID_IMS_TT128 0x9128
-+#define PCI_DEVICE_ID_IMS_TT3D 0x9135
-+
-+#define PCI_VENDOR_ID_TEKRAM2 0x10e1
-+#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c
-+
-+#define PCI_VENDOR_ID_TUNDRA 0x10e3
-+#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000
-+
-+#define PCI_VENDOR_ID_AMCC 0x10e8
-+#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043
-+#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062
-+#define PCI_DEVICE_ID_AMCC_S5933 0x807d
-+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c
-+
-+#define PCI_VENDOR_ID_INTERG 0x10ea
-+#define PCI_DEVICE_ID_INTERG_1680 0x1680
-+#define PCI_DEVICE_ID_INTERG_1682 0x1682
-+#define PCI_DEVICE_ID_INTERG_2000 0x2000
-+#define PCI_DEVICE_ID_INTERG_2010 0x2010
-+#define PCI_DEVICE_ID_INTERG_5000 0x5000
-+#define PCI_DEVICE_ID_INTERG_5050 0x5050
-+
-+#define PCI_VENDOR_ID_REALTEK 0x10ec
-+#define PCI_DEVICE_ID_REALTEK_8029 0x8029
-+#define PCI_DEVICE_ID_REALTEK_8129 0x8129
-+#define PCI_DEVICE_ID_REALTEK_8139 0x8139
-+#define PCI_DEVICE_ID_REALTEK_8169 0x8169
-+
-+#define PCI_VENDOR_ID_XILINX 0x10ee
-+#define PCI_DEVICE_ID_TURBOPAM 0x4020
-+
-+#define PCI_VENDOR_ID_TRUEVISION 0x10fa
-+#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c
-+
-+#define PCI_VENDOR_ID_INIT 0x1101
-+#define PCI_DEVICE_ID_INIT_320P 0x9100
-+#define PCI_DEVICE_ID_INIT_360P 0x9500
-+
-+#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA
-+#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002
-+
-+#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE
-+#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938
-+
-+#define PCI_VENDOR_ID_TTI 0x1103
-+#define PCI_DEVICE_ID_TTI_HPT343 0x0003
-+#define PCI_DEVICE_ID_TTI_HPT366 0x0004
-+#define PCI_DEVICE_ID_TTI_HPT372 0x0005
-+#define PCI_DEVICE_ID_TTI_HPT302 0x0006
-+#define PCI_DEVICE_ID_TTI_HPT371 0x0007
-+#define PCI_DEVICE_ID_TTI_HPT374 0x0008
-+#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant?
-+
-+#define PCI_VENDOR_ID_VIA 0x1106
-+#define PCI_DEVICE_ID_VIA_8763_0 0x0198
-+#define PCI_DEVICE_ID_VIA_8380_0 0x0204
-+#define PCI_DEVICE_ID_VIA_3238_0 0x0238
-+#define PCI_DEVICE_ID_VIA_PT880 0x0258
-+#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
-+#define PCI_DEVICE_ID_VIA_3269_0 0x0269
-+#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
-+#define PCI_DEVICE_ID_VIA_8363_0 0x0305
-+#define PCI_DEVICE_ID_VIA_8371_0 0x0391
-+#define PCI_DEVICE_ID_VIA_8501_0 0x0501
-+#define PCI_DEVICE_ID_VIA_82C505 0x0505
-+#define PCI_DEVICE_ID_VIA_82C561 0x0561
-+#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
-+#define PCI_DEVICE_ID_VIA_82C576 0x0576
-+#define PCI_DEVICE_ID_VIA_82C585 0x0585
-+#define PCI_DEVICE_ID_VIA_82C586_0 0x0586
-+#define PCI_DEVICE_ID_VIA_82C595 0x0595
-+#define PCI_DEVICE_ID_VIA_82C596 0x0596
-+#define PCI_DEVICE_ID_VIA_82C597_0 0x0597
-+#define PCI_DEVICE_ID_VIA_82C598_0 0x0598
-+#define PCI_DEVICE_ID_VIA_8601_0 0x0601
-+#define PCI_DEVICE_ID_VIA_8605_0 0x0605
-+#define PCI_DEVICE_ID_VIA_82C680 0x0680
-+#define PCI_DEVICE_ID_VIA_82C686 0x0686
-+#define PCI_DEVICE_ID_VIA_82C691_0 0x0691
-+#define PCI_DEVICE_ID_VIA_82C693 0x0693
-+#define PCI_DEVICE_ID_VIA_82C693_1 0x0698
-+#define PCI_DEVICE_ID_VIA_82C926 0x0926
-+#define PCI_DEVICE_ID_VIA_82C576_1 0x1571
-+#define PCI_DEVICE_ID_VIA_82C595_97 0x1595
-+#define PCI_DEVICE_ID_VIA_82C586_2 0x3038
-+#define PCI_DEVICE_ID_VIA_82C586_3 0x3040
-+#define PCI_DEVICE_ID_VIA_6305 0x3044
-+#define PCI_DEVICE_ID_VIA_82C596_3 0x3050
-+#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051
-+#define PCI_DEVICE_ID_VIA_82C686_4 0x3057
-+#define PCI_DEVICE_ID_VIA_82C686_5 0x3058
-+#define PCI_DEVICE_ID_VIA_8233_5 0x3059
-+#define PCI_DEVICE_ID_VIA_8233_7 0x3065
-+#define PCI_DEVICE_ID_VIA_82C686_6 0x3068
-+#define PCI_DEVICE_ID_VIA_8233_0 0x3074
-+#define PCI_DEVICE_ID_VIA_8633_0 0x3091
-+#define PCI_DEVICE_ID_VIA_8367_0 0x3099
-+#define PCI_DEVICE_ID_VIA_8653_0 0x3101
-+#define PCI_DEVICE_ID_VIA_8622 0x3102
-+#define PCI_DEVICE_ID_VIA_8233C_0 0x3109
-+#define PCI_DEVICE_ID_VIA_8361 0x3112
-+#define PCI_DEVICE_ID_VIA_XM266 0x3116
-+#define PCI_DEVICE_ID_VIA_612X 0x3119
-+#define PCI_DEVICE_ID_VIA_862X_0 0x3123
-+#define PCI_DEVICE_ID_VIA_8753_0 0x3128
-+#define PCI_DEVICE_ID_VIA_8233A 0x3147
-+#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148
-+#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149
-+#define PCI_DEVICE_ID_VIA_XN266 0x3156
-+#define PCI_DEVICE_ID_VIA_8754C_0 0x3168
-+#define PCI_DEVICE_ID_VIA_8235 0x3177
-+#define PCI_DEVICE_ID_VIA_P4N333 0x3178
-+#define PCI_DEVICE_ID_VIA_8385_0 0x3188
-+#define PCI_DEVICE_ID_VIA_8377_0 0x3189
-+#define PCI_DEVICE_ID_VIA_8378_0 0x3205
-+#define PCI_DEVICE_ID_VIA_8783_0 0x3208
-+#define PCI_DEVICE_ID_VIA_P4M400 0x3209
-+#define PCI_DEVICE_ID_VIA_8237 0x3227
-+#define PCI_DEVICE_ID_VIA_3296_0 0x0296
-+#define PCI_DEVICE_ID_VIA_86C100A 0x6100
-+#define PCI_DEVICE_ID_VIA_8231 0x8231
-+#define PCI_DEVICE_ID_VIA_8231_4 0x8235
-+#define PCI_DEVICE_ID_VIA_8365_1 0x8305
-+#define PCI_DEVICE_ID_VIA_8371_1 0x8391
-+#define PCI_DEVICE_ID_VIA_8501_1 0x8501
-+#define PCI_DEVICE_ID_VIA_82C597_1 0x8597
-+#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
-+#define PCI_DEVICE_ID_VIA_8601_1 0x8601
-+#define PCI_DEVICE_ID_VIA_8505_1 0x8605
-+#define PCI_DEVICE_ID_VIA_8633_1 0xB091
-+#define PCI_DEVICE_ID_VIA_8367_1 0xB099
-+#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101
-+#define PCI_DEVICE_ID_VIA_8615_1 0xB103
-+#define PCI_DEVICE_ID_VIA_8361_1 0xB112
-+#define PCI_DEVICE_ID_VIA_8235_1 0xB168
-+#define PCI_DEVICE_ID_VIA_838X_1 0xB188
-+#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
-+
-+#define PCI_VENDOR_ID_SIEMENS 0x110A
-+#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
-+
-+#define PCI_VENDOR_ID_SMC2 0x1113
-+#define PCI_DEVICE_ID_SMC2_1211TX 0x1211
-+
-+#define PCI_VENDOR_ID_VORTEX 0x1119
-+#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
-+#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001
-+#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002
-+#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003
-+#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004
-+#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007
-+#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008
-+#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009
-+#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a
-+#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b
-+#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c
-+#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125
-+
-+#define PCI_VENDOR_ID_EF 0x111a
-+#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
-+#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002
-+#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003
-+#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005
-+
-+#define PCI_VENDOR_ID_IDT 0x111d
-+#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
-+
-+#define PCI_VENDOR_ID_FORE 0x1127
-+#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210
-+#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
-+
-+#define PCI_VENDOR_ID_IMAGINGTECH 0x112f
-+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000
-+
-+#define PCI_VENDOR_ID_PHILIPS 0x1131
-+#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145
-+#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
-+#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
-+
-+#define PCI_VENDOR_ID_EICON 0x1133
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001
-+#define PCI_DEVICE_ID_EICON_DIVA20 0xe002
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003
-+#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004
-+#define PCI_DEVICE_ID_EICON_DIVA201 0xe005
-+#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b
-+#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013
-+#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014
-+
-+#define PCI_VENDOR_ID_ZIATECH 0x1138
-+#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
-+
-+#define PCI_VENDOR_ID_CYCLONE 0x113c
-+#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001
-+
-+#define PCI_VENDOR_ID_ALLIANCE 0x1142
-+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210
-+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422
-+#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424
-+#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d
-+
-+#define PCI_VENDOR_ID_SYSKONNECT 0x1148
-+#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000
-+#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
-+#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
-+#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320
-+#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
-+#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
-+
-+#define PCI_VENDOR_ID_VMIC 0x114a
-+#define PCI_DEVICE_ID_VMIC_VME 0x7587
-+
-+#define PCI_VENDOR_ID_DIGI 0x114f
-+#define PCI_DEVICE_ID_DIGI_EPC 0x0002
-+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003
-+#define PCI_DEVICE_ID_DIGI_XEM 0x0004
-+#define PCI_DEVICE_ID_DIGI_XR 0x0005
-+#define PCI_DEVICE_ID_DIGI_CX 0x0006
-+#define PCI_DEVICE_ID_DIGI_XRJ 0x0009
-+#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a
-+#define PCI_DEVICE_ID_DIGI_XR_920 0x0027
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
-+#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
-+#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073
-+#define PCI_DEVICE_ID_NEO_2DB9 0x00C8
-+#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
-+#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
-+#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
-+
-+#define PCI_VENDOR_ID_MUTECH 0x1159
-+#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001
-+
-+#define PCI_VENDOR_ID_XIRCOM 0x115d
-+#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003
-+#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
-+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
-+
-+#define PCI_VENDOR_ID_RENDITION 0x1163
-+#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001
-+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
-+
-+#define PCI_VENDOR_ID_SERVERWORKS 0x1166
-+#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
-+#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
-+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010
-+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
-+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
-+
-+#define PCI_VENDOR_ID_SBE 0x1176
-+#define PCI_DEVICE_ID_SBE_WANXL100 0x0301
-+#define PCI_DEVICE_ID_SBE_WANXL200 0x0302
-+#define PCI_DEVICE_ID_SBE_WANXL400 0x0104
-+
-+#define PCI_VENDOR_ID_TOSHIBA 0x1179
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105
-+#define PCI_DEVICE_ID_TOSHIBA_601 0x0601
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617
-+
-+#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
-+#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a
-+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
-+#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180
-+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
-+
-+#define PCI_VENDOR_ID_RICOH 0x1180
-+#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465
-+#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466
-+#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475
-+#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
-+#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
-+
-+#define PCI_VENDOR_ID_DLINK 0x1186
-+#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
-+
-+#define PCI_VENDOR_ID_ARTOP 0x1191
-+#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004
-+#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005
-+#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006
-+#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007
-+#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008
-+#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009
-+#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002
-+#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010
-+#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020
-+#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030
-+#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040
-+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050
-+#define PCI_DEVICE_ID_ARTOP_8060 0x8060
-+#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080
-+#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081
-+#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a
-+
-+#define PCI_VENDOR_ID_ZEITNET 0x1193
-+#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
-+#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
-+
-+#define PCI_VENDOR_ID_OMEGA 0x119b
-+#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221
-+
-+#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
-+#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
-+#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003
-+
-+#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9
-+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334
-+
-+#define PCI_VENDOR_ID_MARVELL 0x11ab
-+#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
-+#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
-+#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
-+#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652
-+#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653
-+
-+#define PCI_VENDOR_ID_LITEON 0x11ad
-+#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002
-+
-+#define PCI_VENDOR_ID_V3 0x11b0
-+#define PCI_DEVICE_ID_V3_V960 0x0001
-+#define PCI_DEVICE_ID_V3_V350 0x0001
-+#define PCI_DEVICE_ID_V3_V961 0x0002
-+#define PCI_DEVICE_ID_V3_V351 0x0002
-+
-+#define PCI_VENDOR_ID_NP 0x11bc
-+#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001
-+
-+#define PCI_VENDOR_ID_ATT 0x11c1
-+#define PCI_DEVICE_ID_ATT_L56XMF 0x0440
-+#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
-+
-+#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */
-+
-+#define PCI_VENDOR_ID_SPECIALIX 0x11cb
-+#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000
-+#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000
-+#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000
-+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-+
-+#define PCI_VENDOR_ID_AURAVISION 0x11d1
-+#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7
-+
-+#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
-+#define PCI_DEVICE_ID_AD1889JS 0x1889
-+
-+#define PCI_VENDOR_ID_IKON 0x11d5
-+#define PCI_DEVICE_ID_IKON_10115 0x0115
-+#define PCI_DEVICE_ID_IKON_10117 0x0117
-+
-+#define PCI_VENDOR_ID_SEGA 0x11db
-+#define PCI_DEVICE_ID_SEGA_BBA 0x1234
-+
-+#define PCI_VENDOR_ID_ZORAN 0x11de
-+#define PCI_DEVICE_ID_ZORAN_36057 0x6057
-+#define PCI_DEVICE_ID_ZORAN_36120 0x6120
-+
-+#define PCI_VENDOR_ID_KINETIC 0x11f4
-+#define PCI_DEVICE_ID_KINETIC_2915 0x2915
-+
-+#define PCI_VENDOR_ID_COMPEX 0x11f6
-+#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
-+#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401
-+
-+#define PCI_VENDOR_ID_RP 0x11fe
-+#define PCI_DEVICE_ID_RP32INTF 0x0001
-+#define PCI_DEVICE_ID_RP8INTF 0x0002
-+#define PCI_DEVICE_ID_RP16INTF 0x0003
-+#define PCI_DEVICE_ID_RP4QUAD 0x0004
-+#define PCI_DEVICE_ID_RP8OCTA 0x0005
-+#define PCI_DEVICE_ID_RP8J 0x0006
-+#define PCI_DEVICE_ID_RP4J 0x0007
-+#define PCI_DEVICE_ID_RP8SNI 0x0008
-+#define PCI_DEVICE_ID_RP16SNI 0x0009
-+#define PCI_DEVICE_ID_RPP4 0x000A
-+#define PCI_DEVICE_ID_RPP8 0x000B
-+#define PCI_DEVICE_ID_RP8M 0x000C
-+#define PCI_DEVICE_ID_RP4M 0x000D
-+#define PCI_DEVICE_ID_RP2_232 0x000E
-+#define PCI_DEVICE_ID_RP2_422 0x000F
-+#define PCI_DEVICE_ID_URP32INTF 0x0801
-+#define PCI_DEVICE_ID_URP8INTF 0x0802
-+#define PCI_DEVICE_ID_URP16INTF 0x0803
-+#define PCI_DEVICE_ID_URP8OCTA 0x0805
-+#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C
-+#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D
-+#define PCI_DEVICE_ID_CRP16INTF 0x0903
-+
-+#define PCI_VENDOR_ID_CYCLADES 0x120e
-+#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100
-+#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105
-+#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200
-+#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201
-+#define PCI_DEVICE_ID_PC300_RX_2 0x0300
-+#define PCI_DEVICE_ID_PC300_RX_1 0x0301
-+#define PCI_DEVICE_ID_PC300_TE_2 0x0310
-+#define PCI_DEVICE_ID_PC300_TE_1 0x0311
-+#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320
-+#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT 0x1259
-+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
-+
-+#define PCI_VENDOR_ID_ESSENTIAL 0x120f
-+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001
-+
-+#define PCI_VENDOR_ID_O2 0x1217
-+#define PCI_DEVICE_ID_O2_6729 0x6729
-+#define PCI_DEVICE_ID_O2_6730 0x673a
-+#define PCI_DEVICE_ID_O2_6832 0x6832
-+#define PCI_DEVICE_ID_O2_6836 0x6836
-+
-+#define PCI_VENDOR_ID_3DFX 0x121a
-+#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001
-+#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002
-+#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003
-+#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
-+#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
-+
-+#define PCI_VENDOR_ID_SIGMADES 0x1236
-+#define PCI_DEVICE_ID_SIGMADES_6425 0x6401
-+
-+#define PCI_VENDOR_ID_CCUBE 0x123f
-+
-+#define PCI_VENDOR_ID_AVM 0x1244
-+#define PCI_DEVICE_ID_AVM_B1 0x0700
-+#define PCI_DEVICE_ID_AVM_C4 0x0800
-+#define PCI_DEVICE_ID_AVM_A1 0x0a00
-+#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00
-+#define PCI_DEVICE_ID_AVM_C2 0x1100
-+#define PCI_DEVICE_ID_AVM_T1 0x1200
-+
-+#define PCI_VENDOR_ID_DIPIX 0x1246
-+
-+#define PCI_VENDOR_ID_STALLION 0x124d
-+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
-+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
-+#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003
-+
-+#define PCI_VENDOR_ID_OPTIBASE 0x1255
-+#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110
-+#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120
-+#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT 0x1259
-+#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701
-+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
-+
-+#define PCI_VENDOR_ID_ESS 0x125d
-+#define PCI_DEVICE_ID_ESS_ESS1968 0x1968
-+#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969
-+#define PCI_DEVICE_ID_ESS_ESS1978 0x1978
-+
-+#define PCI_VENDOR_ID_SATSAGEM 0x1267
-+#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
-+#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352
-+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
-+
-+#define PCI_VENDOR_ID_HUGHES 0x1273
-+#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002
-+
-+#define PCI_VENDOR_ID_ENSONIQ 0x1274
-+#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
-+#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000
-+#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371
-+
-+#define PCI_VENDOR_ID_TRANSMETA 0x1279
-+#define PCI_DEVICE_ID_EFFICEON 0x0060
-+
-+#define PCI_VENDOR_ID_ROCKWELL 0x127A
-+
-+#define PCI_VENDOR_ID_ITE 0x1283
-+#define PCI_DEVICE_ID_ITE_IT8172G 0x8172
-+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
-+#define PCI_DEVICE_ID_ITE_8872 0x8872
-+#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
-+
-+/* formerly Platform Tech */
-+#define PCI_VENDOR_ID_ESS_OLD 0x1285
-+#define PCI_DEVICE_ID_ESS_ESS0100 0x0100
-+
-+#define PCI_VENDOR_ID_ALTEON 0x12ae
-+#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001
-+
-+#define PCI_VENDOR_ID_USR 0x12B9
-+
-+#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B
-+
-+#define PCI_VENDOR_ID_PICTUREL 0x12c5
-+#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081
-+
-+#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
-+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
-+
-+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041
-+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010
-+
-+#define PCI_VENDOR_ID_AUREAL 0x12eb
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002
-+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003
-+
-+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
-+#define PCI_DEVICE_ID_LML_33R10 0x8a02
-+
-+#define PCI_VENDOR_ID_CBOARDS 0x1307
-+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
-+
-+#define PCI_VENDOR_ID_SIIG 0x131f
-+#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
-+#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001
-+#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012
-+#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020
-+#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021
-+#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030
-+#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031
-+#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036
-+#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050
-+#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051
-+#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052
-+#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000
-+#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001
-+#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002
-+#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020
-+#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021
-+#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030
-+#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031
-+#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012
-+#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050
-+#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051
-+#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
-+
-+#define PCI_VENDOR_ID_RADISYS 0x1331
-+#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030
-+
-+#define PCI_VENDOR_ID_DOMEX 0x134a
-+#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001
-+
-+#define PCI_VENDOR_ID_QUATECH 0x135C
-+#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
-+#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
-+#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
-+#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
-+#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
-+#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
-+
-+#define PCI_VENDOR_ID_SEALEVEL 0x135e
-+#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202
-+#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401
-+#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804
-+
-+#define PCI_VENDOR_ID_HYPERCOPE 0x1365
-+#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109
-+
-+#define PCI_VENDOR_ID_KAWASAKI 0x136b
-+#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01
-+
-+#define PCI_VENDOR_ID_CNET 0x1371
-+#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e
-+
-+#define PCI_VENDOR_ID_LMC 0x1376
-+#define PCI_DEVICE_ID_LMC_HSSI 0x0003
-+#define PCI_DEVICE_ID_LMC_DS3 0x0004
-+#define PCI_DEVICE_ID_LMC_SSI 0x0005
-+#define PCI_DEVICE_ID_LMC_T1 0x0006
-+
-+#define PCI_VENDOR_ID_NETGEAR 0x1385
-+#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
-+#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a
-+
-+#define PCI_VENDOR_ID_APPLICOM 0x1389
-+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
-+
-+#define PCI_VENDOR_ID_MOXA 0x1393
-+#define PCI_DEVICE_ID_MOXA_RC7000 0x0001
-+#define PCI_DEVICE_ID_MOXA_CP102 0x1020
-+#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021
-+#define PCI_DEVICE_ID_MOXA_CP102U 0x1022
-+#define PCI_DEVICE_ID_MOXA_C104 0x1040
-+#define PCI_DEVICE_ID_MOXA_CP104U 0x1041
-+#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042
-+#define PCI_DEVICE_ID_MOXA_CT114 0x1140
-+#define PCI_DEVICE_ID_MOXA_CP114 0x1141
-+#define PCI_DEVICE_ID_MOXA_CP118U 0x1180
-+#define PCI_DEVICE_ID_MOXA_CP132 0x1320
-+#define PCI_DEVICE_ID_MOXA_CP132U 0x1321
-+#define PCI_DEVICE_ID_MOXA_CP134U 0x1340
-+#define PCI_DEVICE_ID_MOXA_C168 0x1680
-+#define PCI_DEVICE_ID_MOXA_CP168U 0x1681
-+#define PCI_DEVICE_ID_MOXA_CP204J 0x2040
-+#define PCI_DEVICE_ID_MOXA_C218 0x2180
-+#define PCI_DEVICE_ID_MOXA_C320 0x3200
-+
-+#define PCI_VENDOR_ID_CCD 0x1397
-+#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
-+#define PCI_DEVICE_ID_CCD_B000 0xb000
-+#define PCI_DEVICE_ID_CCD_B006 0xb006
-+#define PCI_DEVICE_ID_CCD_B007 0xb007
-+#define PCI_DEVICE_ID_CCD_B008 0xb008
-+#define PCI_DEVICE_ID_CCD_B009 0xb009
-+#define PCI_DEVICE_ID_CCD_B00A 0xb00a
-+#define PCI_DEVICE_ID_CCD_B00B 0xb00b
-+#define PCI_DEVICE_ID_CCD_B00C 0xb00c
-+#define PCI_DEVICE_ID_CCD_B100 0xb100
-+
-+#define PCI_VENDOR_ID_EXAR 0x13a8
-+#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
-+#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154
-+#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158
-+
-+#define PCI_VENDOR_ID_MICROGATE 0x13c0
-+#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
-+#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020
-+#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
-+#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210
-+
-+#define PCI_VENDOR_ID_3WARE 0x13C1
-+#define PCI_DEVICE_ID_3WARE_1000 0x1000
-+#define PCI_DEVICE_ID_3WARE_7000 0x1001
-+#define PCI_DEVICE_ID_3WARE_9000 0x1002
-+
-+#define PCI_VENDOR_ID_IOMEGA 0x13ca
-+#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231
-+
-+#define PCI_VENDOR_ID_ABOCOM 0x13D1
-+#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1
-+
-+#define PCI_VENDOR_ID_CMEDIA 0x13f6
-+#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100
-+#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101
-+#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111
-+#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112
-+
-+#define PCI_VENDOR_ID_LAVA 0x1407
-+#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */
-+#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */
-+#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */
-+#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */
-+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800
-+
-+#define PCI_VENDOR_ID_TIMEDIA 0x1409
-+#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168
-+
-+#define PCI_VENDOR_ID_OXSEMI 0x1415
-+#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501
-+#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513
-+#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
-+
-+#define PCI_VENDOR_ID_SAMSUNG 0x144d
-+
-+#define PCI_VENDOR_ID_AIRONET 0x14b9
-+#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001
-+#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see
-+#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c
-+
-+#define PCI_VENDOR_ID_TITAN 0x14D2
-+#define PCI_DEVICE_ID_TITAN_010L 0x8001
-+#define PCI_DEVICE_ID_TITAN_100L 0x8010
-+#define PCI_DEVICE_ID_TITAN_110L 0x8011
-+#define PCI_DEVICE_ID_TITAN_200L 0x8020
-+#define PCI_DEVICE_ID_TITAN_210L 0x8021
-+#define PCI_DEVICE_ID_TITAN_400L 0x8040
-+#define PCI_DEVICE_ID_TITAN_800L 0x8080
-+#define PCI_DEVICE_ID_TITAN_100 0xA001
-+#define PCI_DEVICE_ID_TITAN_200 0xA005
-+#define PCI_DEVICE_ID_TITAN_400 0xA003
-+#define PCI_DEVICE_ID_TITAN_800B 0xA004
-+
-+#define PCI_VENDOR_ID_PANACOM 0x14d4
-+#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400
-+#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402
-+
-+#define PCI_VENDOR_ID_SIPACKETS 0x14d9
-+#define PCI_DEVICE_ID_SP_HT 0x0010
-+
-+#define PCI_VENDOR_ID_AFAVLAB 0x14db
-+#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
-+#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
-+
-+#define PCI_VENDOR_ID_BROADCOM 0x14e4
-+#define PCI_DEVICE_ID_TIGON3_5752 0x1600
-+#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
-+#define PCI_DEVICE_ID_TIGON3_5700 0x1644
-+#define PCI_DEVICE_ID_TIGON3_5701 0x1645
-+#define PCI_DEVICE_ID_TIGON3_5702 0x1646
-+#define PCI_DEVICE_ID_TIGON3_5703 0x1647
-+#define PCI_DEVICE_ID_TIGON3_5704 0x1648
-+#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
-+#define PCI_DEVICE_ID_NX2_5706 0x164a
-+#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
-+#define PCI_DEVICE_ID_TIGON3_5705 0x1653
-+#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
-+#define PCI_DEVICE_ID_TIGON3_5720 0x1658
-+#define PCI_DEVICE_ID_TIGON3_5721 0x1659
-+#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
-+#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
-+#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
-+#define PCI_DEVICE_ID_TIGON3_5750 0x1676
-+#define PCI_DEVICE_ID_TIGON3_5751 0x1677
-+#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
-+#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
-+#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
-+#define PCI_DEVICE_ID_TIGON3_5782 0x1696
-+#define PCI_DEVICE_ID_TIGON3_5788 0x169c
-+#define PCI_DEVICE_ID_TIGON3_5789 0x169d
-+#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6
-+#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
-+#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
-+#define PCI_DEVICE_ID_NX2_5706S 0x16aa
-+#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
-+#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
-+#define PCI_DEVICE_ID_TIGON3_5781 0x16dd
-+#define PCI_DEVICE_ID_TIGON3_5753 0x16f7
-+#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd
-+#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe
-+#define PCI_DEVICE_ID_TIGON3_5901 0x170d
-+#define PCI_DEVICE_ID_BCM4401B1 0x170c
-+#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
-+#define PCI_DEVICE_ID_BCM4401 0x4401
-+#define PCI_DEVICE_ID_BCM4401B0 0x4402
-+
-+#define PCI_VENDOR_ID_TOPIC 0x151f
-+#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
-+
-+#define PCI_VENDOR_ID_ENE 0x1524
-+#define PCI_DEVICE_ID_ENE_1211 0x1211
-+#define PCI_DEVICE_ID_ENE_1225 0x1225
-+#define PCI_DEVICE_ID_ENE_1410 0x1410
-+#define PCI_DEVICE_ID_ENE_1420 0x1420
-+
-+#define PCI_VENDOR_ID_SYBA 0x1592
-+#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
-+#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783
-+
-+#define PCI_VENDOR_ID_MORETON 0x15aa
-+#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000
-+
-+#define PCI_VENDOR_ID_ZOLTRIX 0x15b0
-+#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0
-+
-+#define PCI_VENDOR_ID_MELLANOX 0x15b3
-+#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282
-+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
-+#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
-+
-+#define PCI_VENDOR_ID_PDC 0x15e9
-+#define PCI_DEVICE_ID_PDC_1841 0x1841
-+
-+#define PCI_VENDOR_ID_MACROLINK 0x15ed
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000
-+#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002
-+#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003
-+#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000
-+#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001
-+
-+#define PCI_VENDOR_ID_FARSITE 0x1619
-+#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
-+#define PCI_DEVICE_ID_FARSITE_T4P 0x0440
-+#define PCI_DEVICE_ID_FARSITE_T1U 0x0610
-+#define PCI_DEVICE_ID_FARSITE_T2U 0x0620
-+#define PCI_DEVICE_ID_FARSITE_T4U 0x0640
-+#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
-+#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
-+
-+#define PCI_VENDOR_ID_SIBYTE 0x166d
-+#define PCI_DEVICE_ID_BCM1250_HT 0x0002
-+
-+#define PCI_VENDOR_ID_LINKSYS 0x1737
-+#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032
-+#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064
-+
-+#define PCI_VENDOR_ID_ALTIMA 0x173b
-+#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8
-+#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9
-+#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
-+#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
-+
-+#define PCI_VENDOR_ID_S2IO 0x17d5
-+#define PCI_DEVICE_ID_S2IO_WIN 0x5731
-+#define PCI_DEVICE_ID_S2IO_UNI 0x5831
-+#define PCI_DEVICE_ID_HERC_WIN 0x5732
-+#define PCI_DEVICE_ID_HERC_UNI 0x5832
-+
-+#define PCI_VENDOR_ID_INFINICON 0x1820
-+
-+#define PCI_VENDOR_ID_TOPSPIN 0x1867
-+
-+#define PCI_VENDOR_ID_TDI 0x192E
-+#define PCI_DEVICE_ID_TDI_EHCI 0x0101
-+
-+#define PCI_VENDOR_ID_SYMPHONY 0x1c1c
-+#define PCI_DEVICE_ID_SYMPHONY_101 0x0001
-+
-+#define PCI_VENDOR_ID_TEKRAM 0x1de1
-+#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
-+
-+#define PCI_VENDOR_ID_HINT 0x3388
-+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
-+
-+#define PCI_VENDOR_ID_3DLABS 0x3d3d
-+#define PCI_DEVICE_ID_3DLABS_300SX 0x0001
-+#define PCI_DEVICE_ID_3DLABS_500TX 0x0002
-+#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004
-+#define PCI_DEVICE_ID_3DLABS_MX 0x0006
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
-+#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
-+
-+#define PCI_VENDOR_ID_AVANCE 0x4005
-+#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064
-+#define PCI_DEVICE_ID_AVANCE_2302 0x2302
-+
-+#define PCI_VENDOR_ID_AKS 0x416c
-+#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
-+#define PCI_DEVICE_ID_AKS_CPC 0x0200
-+
-+#define PCI_VENDOR_ID_REDCREEK 0x4916
-+#define PCI_DEVICE_ID_RC45 0x1960
-+
-+#define PCI_VENDOR_ID_NETVIN 0x4a14
-+#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000
-+
-+#define PCI_VENDOR_ID_S3 0x5333
-+#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551
-+#define PCI_DEVICE_ID_S3_ViRGE 0x5631
-+#define PCI_DEVICE_ID_S3_TRIO 0x8811
-+#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812
-+#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814
-+#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d
-+#define PCI_DEVICE_ID_S3_868 0x8880
-+#define PCI_DEVICE_ID_S3_928 0x88b0
-+#define PCI_DEVICE_ID_S3_864_1 0x88c0
-+#define PCI_DEVICE_ID_S3_864_2 0x88c1
-+#define PCI_DEVICE_ID_S3_964_1 0x88d0
-+#define PCI_DEVICE_ID_S3_964_2 0x88d1
-+#define PCI_DEVICE_ID_S3_968 0x88f0
-+#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901
-+#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902
-+#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01
-+#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10
-+#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
-+#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01
-+#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02
-+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03
-+#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
-+#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00
-+
-+#define PCI_VENDOR_ID_DUNORD 0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-+
-+#define PCI_VENDOR_ID_DCI 0x6666
-+#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
-+#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
-+
-+#define PCI_VENDOR_ID_DUNORD 0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-+
-+#define PCI_VENDOR_ID_GENROCO 0x5555
-+#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003
-+
-+#define PCI_VENDOR_ID_INTEL 0x8086
-+#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
-+#define PCI_DEVICE_ID_INTEL_21145 0x0039
-+#define PCI_DEVICE_ID_INTEL_82375 0x0482
-+#define PCI_DEVICE_ID_INTEL_82424 0x0483
-+#define PCI_DEVICE_ID_INTEL_82378 0x0484
-+#define PCI_DEVICE_ID_INTEL_82430 0x0486
-+#define PCI_DEVICE_ID_INTEL_82434 0x04a3
-+#define PCI_DEVICE_ID_INTEL_I960 0x0960
-+#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
-+#define PCI_DEVICE_ID_INTEL_82562ET 0x1031
-+#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038
-+#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
-+#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131
-+#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
-+#define PCI_DEVICE_ID_INTEL_82559ER 0x1209
-+#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
-+#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222
-+#define PCI_DEVICE_ID_INTEL_7116 0x1223
-+#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
-+#define PCI_DEVICE_ID_INTEL_7505_1 0x2552
-+#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
-+#define PCI_DEVICE_ID_INTEL_82596 0x1226
-+#define PCI_DEVICE_ID_INTEL_82865 0x1227
-+#define PCI_DEVICE_ID_INTEL_82557 0x1229
-+#define PCI_DEVICE_ID_INTEL_82437 0x122d
-+#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e
-+#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230
-+#define PCI_DEVICE_ID_INTEL_82371MX 0x1234
-+#define PCI_DEVICE_ID_INTEL_82437MX 0x1235
-+#define PCI_DEVICE_ID_INTEL_82441 0x1237
-+#define PCI_DEVICE_ID_INTEL_82380FB 0x124b
-+#define PCI_DEVICE_ID_INTEL_82439 0x1250
-+#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960
-+#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
-+#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
-+#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
-+#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
-+#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412
-+#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
-+#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415
-+#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416
-+#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418
-+#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420
-+#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421
-+#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422
-+#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423
-+#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425
-+#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426
-+#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428
-+#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440
-+#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442
-+#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443
-+#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444
-+#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445
-+#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446
-+#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448
-+#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449
-+#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a
-+#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b
-+#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c
-+#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
-+#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450
-+#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452
-+#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453
-+#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459
-+#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b
-+#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d
-+#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e
-+#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480
-+#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482
-+#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483
-+#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484
-+#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485
-+#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486
-+#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487
-+#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a
-+#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b
-+#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c
-+#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0
-+#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1
-+#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2
-+#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3
-+#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4
-+#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5
-+#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6
-+#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7
-+#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9
-+#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca
-+#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb
-+#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc
-+#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd
-+#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0
-+#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1
-+#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2
-+#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3
-+#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4
-+#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
-+#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
-+#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7
-+#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
-+#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
-+#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
-+#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
-+#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3
-+#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0
-+#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
-+#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6
-+#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7
-+#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9
-+#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa
-+#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
-+#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac
-+#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad
-+#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae
-+#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500
-+#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501
-+#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530
-+#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531
-+#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560
-+#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562
-+#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570
-+#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572
-+#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578
-+#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b
-+#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580
-+#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
-+#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
-+#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
-+#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
-+#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
-+#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
-+#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
-+#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
-+#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651
-+#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652
-+#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653
-+#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658
-+#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659
-+#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a
-+#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b
-+#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c
-+#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660
-+#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662
-+#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664
-+#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666
-+#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668
-+#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a
-+#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d
-+#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
-+#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f
-+#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670
-+#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680
-+#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681
-+#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682
-+#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683
-+#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688
-+#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689
-+#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a
-+#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b
-+#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c
-+#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690
-+#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692
-+#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694
-+#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696
-+#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698
-+#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699
-+#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a
-+#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b
-+#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e
-+#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8
-+#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9
-+#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0
-+#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1
-+#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0
-+#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd
-+#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4
-+#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5
-+#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8
-+#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9
-+#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca
-+#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb
-+#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc
-+#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0
-+#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2
-+#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4
-+#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6
-+#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8
-+#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da
-+#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc
-+#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
-+#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
-+#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
-+#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0
-+#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2
-+#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
-+#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500
-+#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501
-+#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504
-+#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505
-+#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c
-+#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d
-+#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510
-+#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511
-+#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514
-+#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515
-+#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518
-+#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519
-+#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
-+#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
-+#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
-+#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
-+#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
-+#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592
-+#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595
-+#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596
-+#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597
-+#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598
-+#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599
-+#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a
-+#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
-+#define PCI_DEVICE_ID_INTEL_80310 0x530d
-+#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
-+#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
-+#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
-+#define PCI_DEVICE_ID_INTEL_82437VX 0x7030
-+#define PCI_DEVICE_ID_INTEL_82439TX 0x7100
-+#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110
-+#define PCI_DEVICE_ID_INTEL_82371AB 0x7111
-+#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112
-+#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113
-+#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120
-+#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121
-+#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122
-+#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123
-+#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124
-+#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125
-+#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180
-+#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181
-+#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190
-+#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191
-+#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192
-+#define PCI_DEVICE_ID_INTEL_440MX 0x7195
-+#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198
-+#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199
-+#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a
-+#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b
-+#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
-+#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1
-+#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
-+#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600
-+#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
-+#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602
-+#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603
-+#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
-+#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
-+#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
-+#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
-+#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
-+#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
-+#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001
-+#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
-+#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
-+
-+#define PCI_VENDOR_ID_COMPUTONE 0x8e0e
-+#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291
-+#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302
-+#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003
-+
-+#define PCI_VENDOR_ID_KTI 0x8e2e
-+#define PCI_DEVICE_ID_KTI_ET32P2 0x3000
-+
-+#define PCI_VENDOR_ID_ADAPTEC 0x9004
-+#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078
-+#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178
-+#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860
-+#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078
-+#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578
-+#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800
-+#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038
-+#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075
-+#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078
-+#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178
-+#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078
-+#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178
-+#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278
-+#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378
-+#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478
-+#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895
-+#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078
-+#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178
-+#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278
-+#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378
-+#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478
-+#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578
-+#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678
-+#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778
-+#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878
-+#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78
-+
-+#define PCI_VENDOR_ID_ADAPTEC2 0x9005
-+#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010
-+#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011
-+#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013
-+#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f
-+#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050
-+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051
-+#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f
-+#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080
-+#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081
-+#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083
-+#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f
-+#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0
-+#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1
-+#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3
-+#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf
-+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
-+
-+#define PCI_VENDOR_ID_ATRONICS 0x907f
-+#define PCI_DEVICE_ID_ATRONICS_2015 0x2015
-+
-+#define PCI_VENDOR_ID_HOLTEK 0x9412
-+#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
-+
-+#define PCI_VENDOR_ID_NETMOS 0x9710
-+#define PCI_DEVICE_ID_NETMOS_9705 0x9705
-+#define PCI_DEVICE_ID_NETMOS_9715 0x9715
-+#define PCI_DEVICE_ID_NETMOS_9735 0x9735
-+#define PCI_DEVICE_ID_NETMOS_9745 0x9745
-+#define PCI_DEVICE_ID_NETMOS_9755 0x9755
-+#define PCI_DEVICE_ID_NETMOS_9805 0x9805
-+#define PCI_DEVICE_ID_NETMOS_9815 0x9815
-+#define PCI_DEVICE_ID_NETMOS_9835 0x9835
-+#define PCI_DEVICE_ID_NETMOS_9845 0x9845
-+#define PCI_DEVICE_ID_NETMOS_9855 0x9855
-+
-+#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
-+#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
-+
-+#define PCI_VENDOR_ID_TIGERJET 0xe159
-+#define PCI_DEVICE_ID_TIGERJET_300 0x0001
-+#define PCI_DEVICE_ID_TIGERJET_100 0x0002
-+
-+#define PCI_VENDOR_ID_TTTECH 0x0357
-+#define PCI_DEVICE_ID_TTTECH_MC322 0x000A
-+
-+#define PCI_VENDOR_ID_ARK 0xedd8
-+#define PCI_DEVICE_ID_ARK_STING 0xa091
-+#define PCI_DEVICE_ID_ARK_STINGARK 0xa099
-+#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1
projects / openwrt / svn-archive / openwrt.git / commitdiff