mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig

Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.

This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45749

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
index 7e48e23e4fd8e8c8a47ac7b5d5d6f156a1b7f9d9..2beb39cf1f2b22d99207b2298bd550a71c8d7666 100644 (file)
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@@ -103,6 +103,7 @@
                                        0x00058 0xcf35cf35 /* LED_CTRL2 */
                                        0x0005c 0x03ffff00 /* LED_CTRL3 */
                                        0x0007c 0x0000007e /* PORT0_STATUS */
+                                       0x00094 0x00000200 /* PORT6_STATUS */
                                >;
                        };
                };