Add support for Ubiquiti LiteBeam M5 (XW).
The device was previously supported in ar71xx.
See commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=
d0988235dd277b9a832bbc4b2a100ac6e821f577
Add ALTX_MODEL for Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) in generic-ubnt.mk
This models are identical (firmware-wise) to the already supported Ubiquiti Nanostation Loco M (XW)
Add also Ubiquiti NanoBeam M5 to ALTX_MODEL of Ubiquiti Nanostation Loco M (XW) since it's another clone.
Tested on:
- Ubiquiti LiteBeam M5 (XW)
- Ubiquiti PowerBeam M5 (XW)
This also modify target/ath79/dts/ar9342_ubnt_xw.dtsi to use nvmem for calibration data
Checked that the caldata size in the eeprom partition are actually 0x440 on:
- Ubiquiti PowerBeam M5 (XW)
- Ubiquiti Nanostation M5 (XW)
- Ubiquiti LiteBeam M5 (XW)
- Ubiquiti AirGrid M5 HP (XW)
Signed-off-by: Samuele Longhi <agave@dracaena.it>
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9342_ubnt_xw.dtsi"
+#include "ar9342_ubnt_xw_rssileds.dtsi"
/ {
compatible = "ubnt,bullet-m-xw", "ubnt,xw", "qca,ar9342";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "ubnt,litebeam-m5-xw", "qca,ar9342";
+ model = "Ubiquiti LiteBeam M5 (XW)";
+
+ aliases {
+ led-boot = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ led-failsafe = &led_status;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-lan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-wlan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ linux,default-trigger = "phy0tpt";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: led-power {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "mii";
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy1>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar9342_ubnt_xw.dtsi"
-
-/ {
- compatible = "ubnt,nanobeam-m5-xw", "ubnt,xw", "qca,ar9342";
- model = "Ubiquiti NanoBeam M5 (XW)";
-};
-
-&mdio0 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "mii";
- reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&phy1>;
-};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9342_ubnt_xw.dtsi"
+#include "ar9342_ubnt_xw_rssileds.dtsi"
/ {
compatible = "ubnt,nanostation-loco-m-xw", "ubnt,xw", "qca,ar9342";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9342_ubnt_xw.dtsi"
+#include "ar9342_ubnt_xw_rssileds.dtsi"
/ {
compatible = "ubnt,nanostation-m-xw", "ubnt,xw", "qca,ar9342";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9342_ubnt_xw.dtsi"
+#include "ar9342_ubnt_xw_rssileds.dtsi"
/ {
compatible = "ubnt,powerbeam-m2-xw", "ubnt,xw", "qca,ar9342";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9342_ubnt_xw.dtsi"
+#include "ar9342_ubnt_xw_rssileds.dtsi"
/ {
compatible = "ubnt,powerbeam-m5-xw", "ubnt,xw", "qca,ar9342";
compatible = "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Networks XW board";
- aliases {
- led-boot = &led_link4;
- led-running = &led_link4;
- led-upgrade = &led_link4;
- led-failsafe = &led_link4;
- label-mac-device = &wmac;
- };
-
- leds {
- compatible = "gpio-leds";
-
- link1 {
- label = "red:link1";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- link2 {
- label = "orange:link2";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- link3 {
- label = "green:link3";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- led_link4: link4 {
- label = "green:link4";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- };
-
keys {
compatible = "gpio-keys";
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
+
+ calibration_art_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
};
};
};
&wmac {
status = "okay";
- mtd-cal-data = <&art 0x1000>;
+ nvmem-cells = <&calibration_art_1000>;
+ nvmem-cell-names = "calibration";
};
ð0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti Networks XW board";
+
+ aliases {
+ led-boot = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ led-failsafe = &led_link4;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "red:link1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "orange:link2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "green:link4";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
tplink,cpe605-v1|\
tplink,cpe610-v1|\
tplink,cpe610-v2|\
-tplink,tl-wa1201-v2)
+tplink,tl-wa1201-v2|\
+ubnt,litebeam-m5-xw)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
;;
tplink,tl-wdr6500-v2)
ubnt,bullet-m-xw|\
ubnt,lap-120|\
ubnt,litebeam-ac-gen2|\
+ ubnt,litebeam-m5-xw|\
ubnt,nanobeam-ac|\
ubnt,nanobeam-ac-xc|\
ubnt,nanostation-ac-loco|\
endef
TARGET_DEVICES += ubnt_litebeam-ac-gen2
+define Device/ubnt_litebeam-m5-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := LiteBeam M5
+ SUPPORTED_DEVICES += lbe-m5
+ DEVICE_PACKAGES := -kmod-usb2
+endef
+TARGET_DEVICES += ubnt_litebeam-m5-xw
+
define Device/ubnt_nanobeam-ac
$(Device/ubnt-wa)
DEVICE_MODEL := NanoBeam AC
endef
TARGET_DEVICES += ubnt_nanobeam-ac-xc
-define Device/ubnt_nanobeam-m5-xw
- $(Device/ubnt-xw)
- DEVICE_MODEL := NanoBeam M5
- DEVICE_PACKAGES += rssileds
- SUPPORTED_DEVICES += loco-m-xw
-endef
-TARGET_DEVICES += ubnt_nanobeam-m5-xw
-
define Device/ubnt_nanostation-ac
$(Device/ubnt-wa)
DEVICE_MODEL := Nanostation AC
define Device/ubnt_nanostation-loco-m-xw
$(Device/ubnt-xw)
DEVICE_MODEL := Nanostation Loco M
- DEVICE_PACKAGES += rssileds
- SUPPORTED_DEVICES += loco-m-xw
+ DEVICE_PACKAGES += rssileds -kmod-usb2
+ DEVICE_ALT0_VENDOR := Ubiquiti
+ DEVICE_ALT0_MODEL := AirGrid M5 HP
+ DEVICE_ALT0_VARIANT := XW
+ DEVICE_ALT1_VENDOR := Ubiquiti
+ DEVICE_ALT1_MODEL := PowerBeam M5 300
+ DEVICE_ALT1_VARIANT := XW
+ DEVICE_ALT2_VENDOR := Ubiquiti
+ DEVICE_ALT2_MODEL := NanoBeam M5
+ DEVICE_ALT2_VARIANT := XW
+ SUPPORTED_DEVICES += loco-m-xw nanostation-m-xw ubnt,nanobeam-m5-xw
endef
TARGET_DEVICES += ubnt_nanostation-loco-m-xw