--- /dev/null
+From b0c19ed6088ab41dd2a727b60594b7297c15d6ce Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
+Date: Fri, 29 May 2020 14:43:44 +0200
+Subject: [PATCH] sch_cake: Take advantage of skb->hash where appropriate
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+While the other fq-based qdiscs take advantage of skb->hash and doesn't
+recompute it if it is already set, sch_cake does not.
+
+This was a deliberate choice because sch_cake hashes various parts of the
+packet header to support its advanced flow isolation modes. However,
+foregoing the use of skb->hash entirely loses a few important benefits:
+
+- When skb->hash is set by hardware, a few CPU cycles can be saved by not
+ hashing again in software.
+
+- Tunnel encapsulations will generally preserve the value of skb->hash from
+ before the encapsulation, which allows flow-based qdiscs to distinguish
+ between flows even though the outer packet header no longer has flow
+ information.
+
+It turns out that we can preserve these desirable properties in many cases,
+while still supporting the advanced flow isolation properties of sch_cake.
+This patch does so by reusing the skb->hash value as the flow_hash part of
+the hashing procedure in cake_hash() only in the following conditions:
+
+- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
+ set)
+
+AND
+
+- NAT header rewriting is either disabled, or did not change any values
+ used for hashing. The latter is important to match local-origin packets
+ such as those of a tunnel endpoint.
+
+The immediate motivation for fixing this was the recent patch to WireGuard
+to preserve the skb->hash on encapsulation. As such, this is also what I
+tested against; with this patch, added latency under load for competing
+flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
+going through a virtual link shaped to 1Gbps using sch_cake. This matches
+the results we saw with a similar setup using sch_fq_codel when testing the
+WireGuard patch.
+
+Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
+Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+---
+ net/sched/sch_cake.c | 65 ++++++++++++++++++++++++++++++++++----------
+ 1 file changed, 51 insertions(+), 14 deletions(-)
+
+--- a/net/sched/sch_cake.c
++++ b/net/sched/sch_cake.c
+@@ -585,26 +585,48 @@ static bool cobalt_should_drop(struct co
+ return drop;
+ }
+
+-static void cake_update_flowkeys(struct flow_keys *keys,
++static bool cake_update_flowkeys(struct flow_keys *keys,
+ const struct sk_buff *skb)
+ {
+ #if IS_ENABLED(CONFIG_NF_CONNTRACK)
+ struct nf_conntrack_tuple tuple = {};
+- bool rev = !skb->_nfct;
++ bool rev = !skb->_nfct, upd = false;
++ __be32 ip;
+
+ if (tc_skb_protocol(skb) != htons(ETH_P_IP))
+- return;
++ return false;
+
+ if (!nf_ct_get_tuple_skb(&tuple, skb))
+- return;
++ return false;
+
+- keys->addrs.v4addrs.src = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
+- keys->addrs.v4addrs.dst = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
++ ip = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
++ if (ip != keys->addrs.v4addrs.src) {
++ keys->addrs.v4addrs.src = ip;
++ upd = true;
++ }
++ ip = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
++ if (ip != keys->addrs.v4addrs.dst) {
++ keys->addrs.v4addrs.dst = ip;
++ upd = true;
++ }
+
+ if (keys->ports.ports) {
+- keys->ports.src = rev ? tuple.dst.u.all : tuple.src.u.all;
+- keys->ports.dst = rev ? tuple.src.u.all : tuple.dst.u.all;
++ __be16 port;
++
++ port = rev ? tuple.dst.u.all : tuple.src.u.all;
++ if (port != keys->ports.src) {
++ keys->ports.src = port;
++ upd = true;
++ }
++ port = rev ? tuple.src.u.all : tuple.dst.u.all;
++ if (port != keys->ports.dst) {
++ port = keys->ports.dst;
++ upd = true;
++ }
+ }
++ return upd;
++#else
++ return false;
+ #endif
+ }
+
+@@ -625,23 +647,36 @@ static bool cake_ddst(int flow_mode)
+ static u32 cake_hash(struct cake_tin_data *q, const struct sk_buff *skb,
+ int flow_mode, u16 flow_override, u16 host_override)
+ {
++ bool hash_flows = (!flow_override && !!(flow_mode & CAKE_FLOW_FLOWS));
++ bool hash_hosts = (!host_override && !!(flow_mode & CAKE_FLOW_HOSTS));
++ bool nat_enabled = !!(flow_mode & CAKE_FLOW_NAT_FLAG);
+ u32 flow_hash = 0, srchost_hash = 0, dsthost_hash = 0;
+ u16 reduced_hash, srchost_idx, dsthost_idx;
+ struct flow_keys keys, host_keys;
++ bool use_skbhash = skb->l4_hash;
+
+ if (unlikely(flow_mode == CAKE_FLOW_NONE))
+ return 0;
+
+- /* If both overrides are set we can skip packet dissection entirely */
+- if ((flow_override || !(flow_mode & CAKE_FLOW_FLOWS)) &&
+- (host_override || !(flow_mode & CAKE_FLOW_HOSTS)))
++ /* If both overrides are set, or we can use the SKB hash and nat mode is
++ * disabled, we can skip packet dissection entirely. If nat mode is
++ * enabled there's another check below after doing the conntrack lookup.
++ */
++ if ((!hash_flows || (use_skbhash && !nat_enabled)) && !hash_hosts)
+ goto skip_hash;
+
+ skb_flow_dissect_flow_keys(skb, &keys,
+ FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL);
+
+- if (flow_mode & CAKE_FLOW_NAT_FLAG)
+- cake_update_flowkeys(&keys, skb);
++ /* Don't use the SKB hash if we change the lookup keys from conntrack */
++ if (nat_enabled && cake_update_flowkeys(&keys, skb))
++ use_skbhash = false;
++
++ /* If we can still use the SKB hash and don't need the host hash, we can
++ * skip the rest of the hashing procedure
++ */
++ if (use_skbhash && !hash_hosts)
++ goto skip_hash;
+
+ /* flow_hash_from_keys() sorts the addresses by value, so we have
+ * to preserve their order in a separate data structure to treat
+@@ -680,12 +715,14 @@ static u32 cake_hash(struct cake_tin_dat
+ /* This *must* be after the above switch, since as a
+ * side-effect it sorts the src and dst addresses.
+ */
+- if (flow_mode & CAKE_FLOW_FLOWS)
++ if (hash_flows && !use_skbhash)
+ flow_hash = flow_hash_from_keys(&keys);
+
+ skip_hash:
+ if (flow_override)
+ flow_hash = flow_override - 1;
++ else if (use_skbhash)
++ flow_hash = skb->hash;
+ if (host_override) {
+ dsthost_hash = host_override - 1;
+ srchost_hash = host_override - 1;
projects / openwrt / staging / nbd.git / commitdiff