bitmap_shift_left(seq_bits, seq_bits, n, BATADV_TQ_LOCAL_WINDOW_SIZE);
}
-/* receive and process one packet within the sequence number window.
+/**
+ * batadv_bit_get_packet - receive and process one packet within the sequence
+ * number window
+ * @priv: the bat priv with all the soft interface information
+ * @seq_bits: pointer to the sequence number receive packet
+ * @seq_num_diff: difference between the current/received sequence number and
+ * the last sequence number
+ * @set_mark: whether this packet should be marked in seq_bits
*
- * Return:
- * 1 if the window was moved (either new or very old)
+ * Return: 1 if the window was moved (either new or very old),
* 0 if the window was not moved/shifted.
*/
int batadv_bit_get_packet(void *priv, unsigned long *seq_bits, s32 seq_num_diff,
#include <linux/types.h>
/**
- * batadv_test_bit
+ * batadv_test_bit - check if bit is set in the current window
+ *
+ * @seq_bits: pointer to the sequence number receive packet
+ * @last_seqno: latest sequence number in seq_bits
+ * @curr_seqno: sequence number to test for
*
* Return: 1 if the corresponding bit in the given seq_bits indicates true
* and curr_seqno is within range of last_seqno. Otherwise returns 0.
set_bit(n, seq_bits); /* turn the position on */
}
-/**
- * batadv_bit_get_packet - receive and process one packet
- *
- * Return: 1 if received seq_num is considered new, 0 if old
- */
int batadv_bit_get_packet(void *priv, unsigned long *seq_bits, s32 seq_num_diff,
int set_mark);
* originator table of an hard interface
* @inode: inode pointer to debugfs file
* @file: pointer to the seq_file
+ *
+ * Return: 0 on success or negative error number in case of failure
*/
static int batadv_originators_hardif_open(struct inode *inode,
struct file *file)
* batadv_dat_cache_open - Prepare file handler for reads from dat_chache
* @inode: inode which was opened
* @file: file handle to be initialized
+ *
+ * Return: 0 on success or negative error number in case of failure
*/
static int batadv_dat_cache_open(struct inode *inode, struct file *file)
{
* batadv_debugfs_add_hardif - creates the base directory for a hard interface
* in debugfs.
* @hard_iface: hard interface which should be added.
+ *
+ * Return: 0 on success or negative error number in case of failure
*/
int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface)
{
*
* payload_ptr must always point to an address in the skb head buffer and not to
* a fragment.
+ *
+ * Return: big endian crc32c of the checksummed data
*/
__be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr)
{
/**
* batadv_compare_eth - Compare two not u16 aligned Ethernet addresses
+ * @data1: Pointer to a six-byte array containing the Ethernet address
+ * @data2: Pointer other six-byte array containing the Ethernet address
*
* note: can't use ether_addr_equal() as it requires aligned memory
*
/**
* batadv_sum_counter - Sum the cpu-local counters for index 'idx'
+ * @bat_priv: the bat priv with all the soft interface information
+ * @idx: index of counter to sum up
*
* Return: sum of all cpu-local counters
*/
static void batadv_purge_orig(struct work_struct *work);
/**
- * batadv_compare_orig
+ * batadv_compare_orig - comparing function used in the originator hash table
+ * @node: node in the local table
+ * @data2: second object to compare the node to
*
* Return: 1 if they are the same originator
*/
* @version: batman-adv protocol version, part of the genereal header
* @ttl: time to live for this packet, part of the genereal header
* @flags: contains routing relevant flags - see enum batadv_iv_flags
+ * @seqno: sequence identification
+ * @orig: address of the source node
+ * @prev_sender: address of the previous sender
+ * @reserved: reserved byte for alignment
+ * @tq: transmission quality
* @tvlv_len: length of tvlv data following the ogm header
*/
struct batadv_ogm_packet {
* @u: common unicast packet header
* @src: address of the source
* @subtype: packet subtype
+ * @reserved: reserved byte for alignment
*/
struct batadv_unicast_4addr_packet {
struct batadv_unicast_packet u;
}
/**
- * batadv_window_protected checks whether the host restarted and is in the
+ * batadv_window_protected - checks whether the host restarted and is in the
* protection time.
+ * @bat_priv: the bat priv with all the soft interface information
+ * @seq_num_diff: difference between the current/received sequence number and
+ * the last sequence number
+ * @last_reset: jiffies timestamp of the last reset, will be updated when reset
+ * is detected
*
* Return:
* 0 if the packet is to be accepted.
}
/**
- * batadv_add_bcast_packet_to_list
+ * batadv_add_bcast_packet_to_list - queue broadcast packet for multiple sends
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: broadcast packet to add
+ * @delay: number of jiffies to wait before sending
*
* add a broadcast packet to the queue and setup timers. broadcast packets
* are sent multiple times to increase probability for being received.
/**
* batadv_interface_add_vid - ndo_add_vid API implementation
* @dev: the netdev of the mesh interface
+ * @proto: protocol of the the vlan id
* @vid: identifier of the new vlan
*
* Set up all the internal structures for handling the new vlan on top of the
/**
* batadv_interface_kill_vid - ndo_kill_vid API implementation
* @dev: the netdev of the mesh interface
+ * @proto: protocol of the the vlan id
* @vid: identifier of the deleted vlan
*
* Destroy all the internal structures used to handle the vlan identified by vid
/**
* batadv_kobj_to_vlan - convert a kobj in the associated softif_vlan struct
+ * @bat_priv: the bat priv with all the soft interface information
* @obj: kobject to covert
*
* Return: the associated softif_vlan struct if found, NULL otherwise.