Refreshed all patches.
Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
endif
LINUX_VERSION-4.14 = .171
-LINUX_VERSION-4.19 = .105
+LINUX_VERSION-4.19 = .106
LINUX_KERNEL_HASH-4.14.171 = 4fe02489e4b4a187eccf0ef87df6100534c9d485e76d876b1fa247c7635332a0
-LINUX_KERNEL_HASH-4.19.105 = f82c778ab404feb3dce6c08bff089fe2e1d86b62fc40cf2950112ea7aa22bf12
+LINUX_KERNEL_HASH-4.19.106 = 63c8bd76a9b282e18112f8ff9e3fd41e3d1df9f9b7248ea1a370b05a827e9cda
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
-@@ -80,6 +80,24 @@ struct resource *platform_get_resource(s
+@@ -81,6 +81,24 @@ struct resource *platform_get_resource(s
EXPORT_SYMBOL_GPL(platform_get_resource);
/**
drivers/tty/serial/ar933x_uart.c | 113 +++++++++++++++++++++++++++++--
2 files changed, 108 insertions(+), 6 deletions(-)
-diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
-index 52eaac21ff9f..b675924138e0 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
-@@ -1279,6 +1279,7 @@ config SERIAL_AR933X
+@@ -1296,6 +1296,7 @@ config SERIAL_AR933X
tristate "AR933X serial port support"
depends on HAVE_CLK && ATH79
select SERIAL_CORE
help
If you have an Atheros AR933X SOC based board and want to use the
built-in UART of the SoC, say Y to this option.
-diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
-index ea12f10610b6..7e7f1398019f 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -13,6 +13,7 @@
};
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
-@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
+@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_i
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
}
static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
{
unsigned int rdata;
-@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
+@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty
static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
{
}
static void ar933x_uart_start_tx(struct uart_port *port)
-@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct uart_port *port)
+@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct
ar933x_uart_start_tx_interrupt(up);
}
static void ar933x_uart_stop_tx(struct uart_port *port)
{
struct ar933x_uart_port *up =
-@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct uart_port *port)
+@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct u
struct ar933x_uart_port *up =
container_of(port, struct ar933x_uart_port, port);
}
static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
-@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
+@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
count = up->port.fifosize;
do {
unsigned int rdata;
-@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
+@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
}
static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
-@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct uart_port *port)
+@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct ua
AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
/* Enable RX interrupts */
spin_unlock_irqrestore(&up->port.lock, flags);
-@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart_ops = {
+@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart
.verify_port = ar933x_uart_verify_port,
};
#ifdef CONFIG_SERIAL_AR933X_CONSOLE
static struct ar933x_uart_port *
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
-@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct plat
goto err_disable_clk;
}
port->mapbase = mem_res->start;
port->line = id;
port->irq = irq_res->start;
-@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct plat
port->regshift = 2;
port->fifosize = AR933X_UART_FIFO_SIZE;
port->ops = &ar933x_uart_ops;
baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
-@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct plat
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
+++ /dev/null
-From 1738aaf187e0c8e97fbdd9661960b835f45e8985 Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Mon, 18 Nov 2019 23:02:55 +0200
-Subject: [PATCH] leds: pca963x: Fix open-drain initialization
-
-commit 697529091ac7a0a90ca349b914bb30641c13c753 upstream.
-
-Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
-polarity") Mode register 2 was initialized directly with either 0x01
-or 0x05 for open-drain or totem pole (push-pull) configuration.
-
-Afterwards, MODE2 initialization started using bitwise operations on
-top of the default MODE2 register value (0x05). Using bitwise OR for
-setting OUTDRV with 0x01 and 0x05 does not produce correct results.
-When open-drain is used, instead of setting OUTDRV to 0, the driver
-keeps it as 1:
-
-Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
-Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)
-
-Now OUTDRV setting uses correct bitwise operations for initialization:
-
-Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
-Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)
-
-Additional MODE2 register definitions are introduced now as well.
-
-Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
-Signed-off-by: Zahari Petkov <zahari@balena.io>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca963x.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/leds/leds-pca963x.c
-+++ b/drivers/leds/leds-pca963x.c
-@@ -43,6 +43,8 @@
- #define PCA963X_LED_PWM 0x2 /* Controlled through PWM */
- #define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */
-
-+#define PCA963X_MODE2_OUTDRV 0x04 /* Open-drain or totem pole */
-+#define PCA963X_MODE2_INVRT 0x10 /* Normal or inverted direction */
- #define PCA963X_MODE2_DMBLNK 0x20 /* Enable blinking */
-
- #define PCA963X_MODE1 0x00
-@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_clie
- PCA963X_MODE2);
- /* Configure output: open-drain or totem pole (push-pull) */
- if (pdata->outdrv == PCA963X_OPEN_DRAIN)
-- mode2 |= 0x01;
-+ mode2 &= ~PCA963X_MODE2_OUTDRV;
- else
-- mode2 |= 0x05;
-+ mode2 |= PCA963X_MODE2_OUTDRV;
- /* Configure direction: normal or inverted */
- if (pdata->dir == PCA963X_INVERTED)
-- mode2 |= 0x10;
-+ mode2 |= PCA963X_MODE2_INVRT;
- i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
- mode2);
- }
config MODULES_TREE_LOOKUP
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -3029,9 +3029,11 @@ static int setup_load_info(struct load_i
+@@ -3028,9 +3028,11 @@ static int setup_load_info(struct load_i
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
if (flags & MODULE_INIT_IGNORE_VERMAGIC)
modmagic = NULL;
-@@ -3052,6 +3054,7 @@ static int check_modinfo(struct module *
+@@ -3051,6 +3053,7 @@ static int check_modinfo(struct module *
mod->name);
add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
}
/*
* The Mellanox Tavor device gives false positive parity errors. Mark this
* device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3147,6 +3148,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
* To work around this, query the size it should be configured to by the
-@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d
+@@ -3172,6 +3175,8 @@ static void quirk_intel_ntb(struct pci_d
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled, even
* though no one is handling them (e.g., if the i915 driver is never
-@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3210,6 +3215,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
partition@100000 {
- label = "zImage";
- reg = <0x100000 0x300000>;
+- };
+-
+- partition@540000 {
+- label = "initrd";
+- reg = <0x540000 0x300000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
-- partition@540000 {
-- label = "initrd";
-- reg = <0x540000 0x300000>;
-- };
--
- partition@980000 {
- label = "boot";
- reg = <0x980000 0x1f400000>;
- partition@500000 {
- label = "uImage2";
- reg = <0x00500000 0x300000>;
+- };
+-
+- partition@800000 {
+- label = "failsafe";
+- reg = <0x00800000 0x800000>;
+ partition@1c0000 {
+ label = "uboot_env";
+ reg = <0x001c0000 0x40000>;
};
-- partition@800000 {
-- label = "failsafe";
-- reg = <0x00800000 0x800000>;
-- };
--
- partition@1000000 {
- label = "root";
- reg = <0x01000000 0x7000000>;
partition@100000 {
- label = "zImage";
- reg = <0x100000 0x300000>;
+- };
+-
+- partition@540000 {
+- label = "initrd";
+- reg = <0x540000 0x300000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
-- partition@540000 {
-- label = "initrd";
-- reg = <0x540000 0x300000>;
-- };
--
- partition@980000 {
- label = "boot";
- reg = <0x980000 0x1f400000>;
- partition@500000 {
- label = "uImage2";
- reg = <0x00500000 0x300000>;
+- };
+-
+- partition@800000 {
+- label = "failsafe";
+- reg = <0x00800000 0x800000>;
+ partition@1c0000 {
+ label = "uboot_env";
+ reg = <0x001c0000 0x40000>;
};
-- partition@800000 {
-- label = "failsafe";
-- reg = <0x00800000 0x800000>;
-- };
--
- partition@1000000 {
- label = "root";
- reg = <0x01000000 0x7000000>;
projects / openwrt / staging / ynezz.git / commitdiff