*/
.word CONFIG_SYS_XWAY_EBU_BOOTCFG
.word 0x0
-#elif defined(CONFIG_QEMU_MALTA)
+#elif defined(CONFIG_MALTA)
/*
* Linux expects the Board ID here.
*/
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
-#if defined(CONFIG_QEMU_MALTA)
-#define mips_boot_qemu_malta 1
+#if defined(CONFIG_MALTA)
+#define mips_boot_malta 1
#else
-#define mips_boot_qemu_malta 0
+#define mips_boot_malta 0
#endif
static int linux_argc;
strcpy(linux_env_p, env_name);
linux_env_p += strlen(env_name);
- if (mips_boot_qemu_malta) {
+ if (mips_boot_malta) {
linux_env_p++;
linux_env[++linux_env_idx] = linux_env_p;
} else {
if (cp)
linux_env_set("eth1addr", cp);
- if (mips_boot_qemu_malta)
+ if (mips_boot_malta)
linux_env_set("modetty0", "38400n8r");
}
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
- if (mips_boot_qemu_malta)
+ if (mips_boot_malta)
linux_extra = gd->ram_size;
/* we assume that the kernel is in place */
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = malta.o
+obj-y += lowlevel_init.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <config.h>
+#include <gt64120.h>
+
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/malta.h>
+
+#ifdef CONFIG_SYS_BIG_ENDIAN
+#define CPU_TO_GT32(_x) ((_x))
+#else
+#define CPU_TO_GT32(_x) ( \
+ (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
+ (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
+#endif
+
+ .text
+ .set noreorder
+ .set mips32
+
+ .globl lowlevel_init
+lowlevel_init:
+
+ /*
+ * Load BAR registers of GT64120 as done by YAMON
+ *
+ * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
+ * to the barebox mailing list.
+ * The subject of the original patch:
+ * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
+ * URL:
+ * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
+ *
+ * based on write_bootloader() in qemu.git/hw/mips_malta.c
+ * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
+ */
+
+ /* move GT64120 registers from 0x14000000 to 0x1be00000 */
+ li t1, KSEG1ADDR(GT_DEF_BASE)
+ li t0, CPU_TO_GT32(0xdf000000)
+ sw t0, GT_ISD_OFS(t1)
+
+ /* setup MEM-to-PCI0 mapping */
+ li t1, KSEG1ADDR(MALTA_GT_BASE)
+
+ /* setup PCI0 io window to 0x18000000-0x181fffff */
+ li t0, CPU_TO_GT32(0xc0000000)
+ sw t0, GT_PCI0IOLD_OFS(t1)
+ li t0, CPU_TO_GT32(0x40000000)
+ sw t0, GT_PCI0IOHD_OFS(t1)
+
+ /* setup PCI0 mem windows */
+ li t0, CPU_TO_GT32(0x80000000)
+ sw t0, GT_PCI0M0LD_OFS(t1)
+ li t0, CPU_TO_GT32(0x3f000000)
+ sw t0, GT_PCI0M0HD_OFS(t1)
+
+ li t0, CPU_TO_GT32(0xc1000000)
+ sw t0, GT_PCI0M1LD_OFS(t1)
+ li t0, CPU_TO_GT32(0x5e000000)
+ sw t0, GT_PCI0M1HD_OFS(t1)
+
+ jr ra
+ nop
--- /dev/null
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/malta.h>
+#include <pci_gt64120.h>
+
+phys_size_t initdram(int board_type)
+{
+ return CONFIG_SYS_MEM_SIZE;
+}
+
+int checkboard(void)
+{
+ puts("Board: MIPS Malta CoreLV (Qemu)\n");
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+
+void _machine_restart(void)
+{
+ void __iomem *reset_base;
+
+ reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
+ __raw_writel(GORESET, reset_base);
+}
+
+void pci_init_board(void)
+{
+ set_io_port_base(CKSEG1ADDR(MALTA_IO_PORT_BASE));
+
+ gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
+ 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
+ 0x10000000, 0x10000000, 128 * 1024 * 1024,
+ 0x00000000, 0x00000000, 0x20000);
+}
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = qemu-malta.o
-obj-y += lowlevel_init.o
+++ /dev/null
-/*
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-
-#include <config.h>
-#include <gt64120.h>
-
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/malta.h>
-
-#ifdef CONFIG_SYS_BIG_ENDIAN
-#define CPU_TO_GT32(_x) ((_x))
-#else
-#define CPU_TO_GT32(_x) ( \
- (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
- (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
-#endif
-
- .text
- .set noreorder
- .set mips32
-
- .globl lowlevel_init
-lowlevel_init:
-
- /*
- * Load BAR registers of GT64120 as done by YAMON
- *
- * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
- * to the barebox mailing list.
- * The subject of the original patch:
- * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
- * URL:
- * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
- *
- * based on write_bootloader() in qemu.git/hw/mips_malta.c
- * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
- */
-
- /* move GT64120 registers from 0x14000000 to 0x1be00000 */
- li t1, KSEG1ADDR(GT_DEF_BASE)
- li t0, CPU_TO_GT32(0xdf000000)
- sw t0, GT_ISD_OFS(t1)
-
- /* setup MEM-to-PCI0 mapping */
- li t1, KSEG1ADDR(MALTA_GT_BASE)
-
- /* setup PCI0 io window to 0x18000000-0x181fffff */
- li t0, CPU_TO_GT32(0xc0000000)
- sw t0, GT_PCI0IOLD_OFS(t1)
- li t0, CPU_TO_GT32(0x40000000)
- sw t0, GT_PCI0IOHD_OFS(t1)
-
- /* setup PCI0 mem windows */
- li t0, CPU_TO_GT32(0x80000000)
- sw t0, GT_PCI0M0LD_OFS(t1)
- li t0, CPU_TO_GT32(0x3f000000)
- sw t0, GT_PCI0M0HD_OFS(t1)
-
- li t0, CPU_TO_GT32(0xc1000000)
- sw t0, GT_PCI0M1LD_OFS(t1)
- li t0, CPU_TO_GT32(0x5e000000)
- sw t0, GT_PCI0M1HD_OFS(t1)
-
- jr ra
- nop
+++ /dev/null
-/*
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-
-#include <common.h>
-#include <netdev.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/malta.h>
-#include <pci_gt64120.h>
-
-phys_size_t initdram(int board_type)
-{
- return CONFIG_SYS_MEM_SIZE;
-}
-
-int checkboard(void)
-{
- puts("Board: MIPS Malta CoreLV (Qemu)\n");
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
-
-void _machine_restart(void)
-{
- void __iomem *reset_base;
-
- reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
- __raw_writel(GORESET, reset_base);
-}
-
-void pci_init_board(void)
-{
- set_io_port_base(CKSEG1ADDR(MALTA_IO_PORT_BASE));
-
- gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
- 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
- 0x10000000, 0x10000000, 128 * 1024 * 1024,
- 0x00000000, 0x00000000, 0x20000);
-}
Active m68k mcf547x_8x - freescale m548xevb M5485GFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Active m68k mcf547x_8x - freescale m548xevb M5485HFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Active microblaze microblaze - xilinx microblaze-generic microblaze-generic - Michal Simek <monstr@monstr.eu>
-Active mips mips32 - - qemu-malta qemu_malta qemu-malta:MIPS32,SYS_BIG_ENDIAN -
-Active mips mips32 - - qemu-malta qemu_maltael qemu-malta:MIPS32,SYS_LITTLE_ENDIAN -
Active mips mips32 - - qemu-mips qemu_mips qemu-mips:SYS_BIG_ENDIAN Vlad Lungu <vlad.lungu@windriver.com>
Active mips mips32 - - qemu-mips qemu_mipsel qemu-mips:SYS_LITTLE_ENDIAN -
+Active mips mips32 - imgtec malta malta malta:MIPS32,SYS_BIG_ENDIAN -
+Active mips mips32 - imgtec malta maltael malta:MIPS32,SYS_LITTLE_ENDIAN -
Active mips mips32 - micronas vct vct_platinum vct:VCT_PLATINUM -
Active mips mips32 - micronas vct vct_platinum_onenand vct:VCT_PLATINUM,VCT_ONENAND -
Active mips mips32 - micronas vct vct_platinum_onenand_small vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE -
--- /dev/null
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _MALTA_CONFIG_H
+#define _MALTA_CONFIG_H
+
+#include <asm/addrspace.h>
+#include <asm/malta.h>
+
+/*
+ * System configuration
+ */
+#define CONFIG_MALTA
+
+#define CONFIG_PCI
+#define CONFIG_PCI_GT64120
+#define CONFIG_PCI_PNP
+#define CONFIG_PCNET
+
+/*
+ * CPU Configuration
+ */
+#define CONFIG_SYS_MHZ 250 /* arbitrary value */
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
+
+#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */
+#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */
+
+#define CONFIG_SWAP_IO_SPACE
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
+
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
+
+/*
+ * Console configuration
+ */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT "maltael # "
+#else
+#define CONFIG_SYS_PROMPT "malta # "
+#endif
+
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Serial driver
+ */
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK 115200
+#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE)
+#define CONFIG_CONS_INDEX 1
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x10000
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Commands
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */
+
+#endif /* _MALTA_CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-
-#ifndef _QEMU_MALTA_CONFIG_H
-#define _QEMU_MALTA_CONFIG_H
-
-#include <asm/addrspace.h>
-#include <asm/malta.h>
-
-/*
- * System configuration
- */
-#define CONFIG_QEMU_MALTA
-
-#define CONFIG_PCI
-#define CONFIG_PCI_GT64120
-#define CONFIG_PCI_PNP
-#define CONFIG_PCNET
-
-/*
- * CPU Configuration
- */
-#define CONFIG_SYS_MHZ 250 /* arbitrary value */
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-
-#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */
-#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */
-
-#define CONFIG_SWAP_IO_SPACE
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024)
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
-#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
-
-/*
- * Console configuration
- */
-#if defined(CONFIG_SYS_LITTLE_ENDIAN)
-#define CONFIG_SYS_PROMPT "qemu-maltael # "
-#else
-#define CONFIG_SYS_PROMPT "qemu-malta # "
-#endif
-
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Serial driver
- */
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE)
-#define CONFIG_CONS_INDEX 1
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE)
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Commands
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */
-
-#endif /* _QEMU_MALTA_CONFIG_H */
projects / project / bcm63xx / u-boot.git / commitdiff