#include "comedi_pci.h"
/**
- * comedi_to_pci_dev() - comedi_device pointer to pci_dev pointer.
- * @dev: comedi_device struct
+ * comedi_to_pci_dev() - Return PCI device attached to COMEDI device
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev.
+ *
+ * Returns: Attached PCI device if @dev->hw_dev is non-%NULL.
+ * Returns %NULL if @dev->hw_dev is %NULL.
*/
struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
{
EXPORT_SYMBOL_GPL(comedi_to_pci_dev);
/**
- * comedi_pci_enable() - Enable the PCI device and request the regions.
- * @dev: comedi_device struct
+ * comedi_pci_enable() - Enable the PCI device and request the regions
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev. Enable the PCI device
+ * and request its regions. Set @dev->ioenabled to %true if successful,
+ * otherwise undo what was done.
+ *
+ * Calls to comedi_pci_enable() and comedi_pci_disable() cannot be nested.
+ *
+ * Returns:
+ * 0 on success,
+ * -%ENODEV if @dev->hw_dev is %NULL,
+ * -%EBUSY if regions busy,
+ * or some negative error number if failed to enable PCI device.
+ *
*/
int comedi_pci_enable(struct comedi_device *dev)
{
EXPORT_SYMBOL_GPL(comedi_pci_enable);
/**
- * comedi_pci_disable() - Release the regions and disable the PCI device.
- * @dev: comedi_device struct
+ * comedi_pci_disable() - Release the regions and disable the PCI device
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev. If the earlier call
+ * to comedi_pci_enable() was successful, release the PCI device's regions
+ * and disable it. Reset @dev->ioenabled back to %false.
*/
void comedi_pci_disable(struct comedi_device *dev)
{
EXPORT_SYMBOL_GPL(comedi_pci_disable);
/**
- * comedi_pci_detach() - A generic (*detach) function for PCI drivers.
- * @dev: comedi_device struct
+ * comedi_pci_detach() - A generic "detach" handler for PCI COMEDI drivers
+ * @dev: COMEDI device.
+ *
+ * COMEDI drivers for PCI devices that need no special clean-up of private data
+ * and have no ioremapped regions other than that pointed to by @dev->mmio may
+ * use this function as its "detach" handler called by the COMEDI core when a
+ * COMEDI device is being detached from the low-level driver. It may be also
+ * called from a more specific "detach" handler that does additional clean-up.
+ *
+ * Free the IRQ if @dev->irq is non-zero, iounmap @dev->mmio if it is
+ * non-%NULL, and call comedi_pci_disable() to release the PCI device's regions
+ * and disable it.
*/
void comedi_pci_detach(struct comedi_device *dev)
{
EXPORT_SYMBOL_GPL(comedi_pci_detach);
/**
- * comedi_pci_auto_config() - Configure/probe a comedi PCI driver.
- * @pcidev: pci_dev struct
- * @driver: comedi_driver struct
- * @context: driver specific data, passed to comedi_auto_config()
+ * comedi_pci_auto_config() - Configure/probe a PCI COMEDI device
+ * @pcidev: PCI device.
+ * @driver: Registered COMEDI driver.
+ * @context: Driver specific data, passed to comedi_auto_config().
*
- * Typically called from the pci_driver (*probe) function.
+ * Typically called from the pci_driver (*probe) function. Auto-configure
+ * a COMEDI device, using the &struct device embedded in *@pcidev as the
+ * hardware device. The @context value gets passed through to @driver's
+ * "auto_attach" handler. The "auto_attach" handler may call
+ * comedi_to_pci_dev() on the passed in COMEDI device to recover @pcidev.
+ *
+ * Returns: The result of calling comedi_auto_config() (0 on success, or
+ * a negative error number on failure).
*/
int comedi_pci_auto_config(struct pci_dev *pcidev,
struct comedi_driver *driver,
EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
/**
- * comedi_pci_auto_unconfig() - Unconfigure/remove a comedi PCI driver.
- * @pcidev: pci_dev struct
+ * comedi_pci_auto_unconfig() - Unconfigure/remove a PCI COMEDI device
+ * @pcidev: PCI device.
+ *
+ * Typically called from the pci_driver (*remove) function. Auto-unconfigure
+ * a COMEDI device attached to this PCI device, using a pointer to the
+ * &struct device embedded in *@pcidev as the hardware device. The COMEDI
+ * driver's "detach" handler will be called during unconfiguration of the
+ * COMEDI device.
*
- * Typically called from the pci_driver (*remove) function.
+ * Note that the COMEDI device may have already been unconfigured using the
+ * %COMEDI_DEVCONFIG ioctl, in which case this attempt to unconfigure it
+ * again should be ignored.
*/
void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
{
EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
/**
- * comedi_pci_driver_register() - Register a comedi PCI driver.
- * @comedi_driver: comedi_driver struct
- * @pci_driver: pci_driver struct
+ * comedi_pci_driver_register() - Register a PCI COMEDI driver
+ * @comedi_driver: COMEDI driver to be registered.
+ * @pci_driver: PCI driver to be registered.
+ *
+ * This function is called from the module_init() of PCI COMEDI driver modules
+ * to register the COMEDI driver and the PCI driver. Do not call it directly,
+ * use the module_comedi_pci_driver() helper macro instead.
*
- * This function is used for the module_init() of comedi PCI drivers.
- * Do not call it directly, use the module_comedi_pci_driver() helper
- * macro instead.
+ * Returns: 0 on success, or a negative error number on failure.
*/
int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
/**
- * comedi_pci_driver_unregister() - Unregister a comedi PCI driver.
- * @comedi_driver: comedi_driver struct
- * @pci_driver: pci_driver struct
+ * comedi_pci_driver_unregister() - Unregister a PCI COMEDI driver
+ * @comedi_driver: COMEDI driver to be unregistered.
+ * @pci_driver: PCI driver to be unregistered.
*
- * This function is used for the module_exit() of comedi PCI drivers.
- * Do not call it directly, use the module_comedi_pci_driver() helper
- * macro instead.
+ * This function is called from the module_exit() of PCI COMEDI driver modules
+ * to unregister the PCI driver and the COMEDI driver. Do not call it
+ * directly, use the module_comedi_pci_driver() helper macro instead.
*/
void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)