Fix LOWBOOT configuration for MPC5200 with DDR memory
authorwdenk <wdenk>
Thu, 11 Mar 2004 22:46:36 +0000 (22:46 +0000)
committerwdenk <wdenk>
Thu, 11 Mar 2004 22:46:36 +0000 (22:46 +0000)
CHANGELOG
Makefile
cpu/mpc5xxx/start.S
cpu/mpc5xxx/usb_ohci.c
drivers/inca-ip_sw.c

index 0a130aa7ba81d56a7e4636ac78c17f259d550e28..aa6bfe5acf7440cc183e51372e4bba84cf16e1dc 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Fix LOWBOOT configuration for MPC5200 with DDR memory
+
 * Fix SDRAM timings for LITE5200 / IceCube board
 
 * Handle Auti-MDIX / connection status for INCA-IP
index 8c822c6defa1670c52bf8f4fa1db4e4ba6a099d5..b10acbb6e18754410a2132f852d52d993aff55fe 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -207,9 +207,10 @@ PATI_config:unconfig
 MPC5200LITE_config             \
 MPC5200LITE_LOWBOOT_config     \
 MPC5200LITE_LOWBOOT08_config   \
-icecube_5200_DDR_LOWBOOT_config        \
 icecube_5200_DDR_config                \
 IceCube_5200_DDR_config                \
+icecube_5200_DDR_LOWBOOT_config \
+icecube_5200_DDR_LOWBOOT08_config \
 icecube_5200_config            \
 IceCube_5200_config            \
 IceCube_5100_config:           unconfig
index a1631f49a438a50f9b5afe59f1a19760e4d73940..559c7f415aab092a21b3404040c1f076abdb99ec 100644 (file)
@@ -108,18 +108,19 @@ boot_warm:
 #error CFG_LOWBOOT is incompatible with CFG_RAMBOOT
 #endif /* CFG_RAMBOOT */
        lis     r4, CFG_DEFAULT_MBAR@h
-       lis     r3,     0x0000FF00@h
-       ori     r3, r3, 0x0000FF00@l
-       stw     r3, 0x4(r4)
-       lis     r3,     0x0000FFFF@h
-       ori     r3, r3, 0x0000FFFF@l
-       stw     r3, 0x8(r4)
+       lis     r3,     START_REG(CFG_BOOTCS_START)@h
+       ori     r3, r3, START_REG(CFG_BOOTCS_START)@l
+       stw     r3, 0x4(r4)             /* CS0 start */
+       lis     r3,     STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
+       ori     r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
+
+       stw     r3, 0x8(r4)             /* CS0 stop */
        lis     r3,     0x00047800@h
        ori     r3, r3, 0x00047800@l
-       stw     r3, 0x300(r4)
+       stw     r3, 0x300(r4)           /* set timing, CS0/boot conf reg */
        lis     r3,     0x02010000@h
        ori     r3, r3, 0x02010000@l
-       stw     r3, 0x54(r4)
+       stw     r3, 0x54(r4)            /* CS0 and Boot enable, IPBI ctrl reg */
 
        lis     r3,     lowboot_reentry@h
        ori     r3, r3, lowboot_reentry@l
@@ -127,18 +128,18 @@ boot_warm:
        blr                             /* jump to flash based address */
 
 lowboot_reentry:
-       lis     r3,     0x0000FF00@h
-       ori     r3, r3, 0x0000FF00@l
-       stw     r3, 0x4c(r4)
-       lis     r3,     0x0000FFFF@h
-       ori     r3, r3, 0x0000FFFF@l
-       stw     r3, 0x50(r4)
+       lis     r3,     START_REG(CFG_BOOTCS_START)@h
+       ori     r3, r3, START_REG(CFG_BOOTCS_START)@l
+       stw     r3, 0x4c(r4)            /* Boot start */
+       lis     r3,     STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
+       ori     r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
+       stw     r3, 0x50(r4)            /* Boot stop */
        lis     r3,     0x00047800@h
        ori     r3, r3, 0x00047800@l
-       stw     r3, 0x300(r4)
+       stw     r3, 0x300(r4)           /* set timing, CS0/boot conf reg */
        lis     r3,     0x02000001@h
        ori     r3, r3, 0x02000001@l
-       stw     r3, 0x54(r4)
+       stw     r3, 0x54(r4)            /* Boot enable, CS0 disable, wait state enable */
 #endif /* CFG_LOWBOOT */
 
 #if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
index 5b5eac2084c04d271ce9a5b82df21c96e08693a9..5fcb376c131d0720dbbe1e1ccfdee9d89bf903e6 100644 (file)
@@ -488,7 +488,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
                if (ohci->ed_controltail == NULL) {
                        writel (ed, &ohci->regs->ed_controlhead);
                } else {
-                       ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 (ed);
+                       ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
                }
                ed->ed_prev = ohci->ed_controltail;
                if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@@ -504,7 +504,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
                if (ohci->ed_bulktail == NULL) {
                        writel (ed, &ohci->regs->ed_bulkhead);
                } else {
-                       ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 (ed);
+                       ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
                }
                ed->ed_prev = ohci->ed_bulktail;
                if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@@ -598,7 +598,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
                ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
                /* dummy td; end of td list for ed */
                td = td_alloc (usb_dev);
-               ed->hwTailP = ohci_cpu_to_le32 (td);
+               ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
                ed->hwHeadP = ed->hwTailP;
                ed->state = ED_UNLINK;
                ed->type = usb_pipetype (pipe);
@@ -656,12 +656,12 @@ static void td_fill (ohci_t *ohci, unsigned int info,
                data = 0;
 
        td->hwINFO = ohci_cpu_to_le32 (info);
-       td->hwCBP = ohci_cpu_to_le32 (data);
+       td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
        if (data)
-               td->hwBE = ohci_cpu_to_le32 (data + len - 1);
+               td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
        else
                td->hwBE = 0;
-       td->hwNextTD = ohci_cpu_to_le32 (td_pt);
+       td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
        td->hwPSW [0] = ohci_cpu_to_le16 (((__u32)data & 0x0FFF) | 0xE000);
 
        /* append to queue */
index 3b6397da50530567fb4ed8b439902920cfc8ac4e..f8fe52ea26db9def4535bcce7eac9272b2b59598 100644 (file)
@@ -14,7 +14,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
 #define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
 #define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
 #define SW_WRITE_REG(reg, value)   \
-        *((volatile u32*)reg) = (u32)value;\
-        DELAY;\
-        *((volatile u32*)reg) = (u32)value;
+       *((volatile u32*)reg) = (u32)value;\
+       DELAY;\
+       *((volatile u32*)reg) = (u32)value;
 
-#define SW_READ_REG(reg, value)    \
-        value = (u32)*((volatile u32*)reg);\
-        DELAY;\
-        value = (u32)*((volatile u32*)reg);
+#define SW_READ_REG(reg, value)           \
+       value = (u32)*((volatile u32*)reg);\
+       DELAY;\
+       value = (u32)*((volatile u32*)reg);
 
-#define INCA_DMA_TX_POLLING_TIME       0x07
-#define INCA_DMA_RX_POLLING_TIME       0x07
+#define INCA_DMA_TX_POLLING_TIME       0x07
+#define INCA_DMA_RX_POLLING_TIME       0x07
 
-#define INCA_DMA_TX_HOLD   0x80000000
-#define INCA_DMA_TX_EOP    0x40000000
-#define INCA_DMA_TX_SOP    0x20000000
-#define INCA_DMA_TX_ICPT   0x10000000
-#define INCA_DMA_TX_IEOP   0x08000000
+#define INCA_DMA_TX_HOLD               0x80000000
+#define INCA_DMA_TX_EOP                        0x40000000
+#define INCA_DMA_TX_SOP                        0x20000000
+#define INCA_DMA_TX_ICPT               0x10000000
+#define INCA_DMA_TX_IEOP               0x08000000
 
-#define INCA_DMA_RX_C   0x80000000
-#define INCA_DMA_RX_SOP 0x40000000
-#define INCA_DMA_RX_EOP 0x20000000
+#define INCA_DMA_RX_C                  0x80000000
+#define INCA_DMA_RX_SOP                        0x40000000
+#define INCA_DMA_RX_EOP                        0x20000000
 
 #define INCA_SWITCH_PHY_SPEED_10H      0x1
 #define INCA_SWITCH_PHY_SPEED_10F      0x5
 #define INCA_SWITCH_PHY_SPEED_100F     0x6
 
 /************************ Auto MDIX settings ************************/
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR      INCA_IP_Ports_P1_DIR
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL   INCA_IP_Ports_P1_ALTSEL
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT      INCA_IP_Ports_P1_OUT
-#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX  16
-
-#define WAIT_SIGNAL_RETRIES                  100
-#define WAIT_LINK_RETRIES                    100
-#define LINK_RETRY_DELAY                     300  /* ms */
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR                INCA_IP_Ports_P1_DIR
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL     INCA_IP_Ports_P1_ALTSEL
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT                INCA_IP_Ports_P1_OUT
+#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX    16
+
+#define WAIT_SIGNAL_RETRIES                    100
+#define WAIT_LINK_RETRIES                      100
+#define LINK_RETRY_DELAY                       2000  /* ms */
 /********************************************************************/
 
 typedef struct
 {
        union {
                struct {
-                       volatile u32 HOLD                :1;
-                       volatile u32 ICpt                :1;
-                       volatile u32 IEop                :1;
-                       volatile u32 offset              :3;
-                       volatile u32 reserved0           :4;
-                       volatile u32 NFB                 :22;
+                       volatile u32 HOLD               :1;
+                       volatile u32 ICpt               :1;
+                       volatile u32 IEop               :1;
+                       volatile u32 offset             :3;
+                       volatile u32 reserved0          :4;
+                       volatile u32 NFB                :22;
                }field;
 
                volatile u32 word;
@@ -104,11 +104,11 @@ typedef struct
 
        union {
                struct {
-                       volatile u32 C                   :1;
-                       volatile u32 Sop                 :1;
-                       volatile u32 Eop                 :1;
-                       volatile u32 reserved3           :12;
-                       volatile u32 NBT                 :17;
+                       volatile u32 C                  :1;
+                       volatile u32 Sop                :1;
+                       volatile u32 Eop                :1;
+                       volatile u32 reserved3          :12;
+                       volatile u32 NBT                :17;
                }field;
 
                volatile u32 word;
@@ -121,13 +121,13 @@ typedef struct
 {
        union {
                struct {
-                       volatile u32 HOLD                :1;
-                       volatile u32 Eop                 :1;
-                       volatile u32 Sop                 :1;
-                       volatile u32 ICpt                :1;
-                       volatile u32 IEop                :1;
-                       volatile u32 reserved0           :5;
-                       volatile u32 NBA                 :22;
+                       volatile u32 HOLD               :1;
+                       volatile u32 Eop                :1;
+                       volatile u32 Sop                :1;
+                       volatile u32 ICpt               :1;
+                       volatile u32 IEop               :1;
+                       volatile u32 reserved0          :5;
+                       volatile u32 NBA                :22;
                }field;
 
                volatile u32 word;
@@ -137,8 +137,8 @@ typedef struct
 
        volatile u32 TxDataPtr;
 
-       volatile u32 C                   :1;
-       volatile u32 reserved3           :31;
+       volatile u32 C                  :1;
+       volatile u32 reserved3          :31;
 
 } inca_tx_descriptor_t;
 
@@ -148,12 +148,11 @@ static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
 
 static int tx_new, rx_new, tx_hold, rx_hold;
 static int tx_old_hold = -1;
-static int initialized  = 0;
+static int initialized = 0;
 
 
 static int inca_switch_init(struct eth_device *dev, bd_t * bis);
-static int inca_switch_send(struct eth_device *dev, volatile void *packet,
-                                                 int length);
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
 static int inca_switch_recv(struct eth_device *dev);
 static void inca_switch_halt(struct eth_device *dev);
 static void inca_init_switch_chip(void);
@@ -265,9 +264,9 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 
                memset(tx_desc, 0, sizeof(tx_ring[i]));
 
-               tx_desc->params.word       = 0;
+               tx_desc->params.word       = 0;
                tx_desc->params.field.HOLD = 1;
-               tx_desc->C                 = 1;
+               tx_desc->C                 = 1;
 
                        /* Check if it is the last descriptor.
                         */
@@ -296,8 +295,7 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 
        /* Writing to the COMMAND REG.
         */
-       DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0,
-                     INCA_IP_DMA_DMA_RXCCR0_INIT);
+       DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
 
        /* Initialize TxDMA.
         */
@@ -320,9 +318,9 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 #endif
        /* enable spanning tree forwarding, enable the CPU port */
        /* ST_PT:
-        *      CPS (CPU port status)   0x3 (forwarding)
-        *      LPS (LAN port status)   0x3 (forwarding)
-        *      PPS (PC port status)    0x3 (forwarding)
+        *      CPS (CPU port status)   0x3 (forwarding)
+        *      LPS (LAN port status)   0x3 (forwarding)
+        *      PPS (PC port status)    0x3 (forwarding)
         */
        SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
 
@@ -336,11 +334,11 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 
 static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
 {
-       int                    i;
-       int                    res         = -1;
-       u32                    command;
-       u32                    regValue;
-       inca_tx_descriptor_t * tx_desc     = KSEG1ADDR(&tx_ring[tx_new]);
+       int                    i;
+       int                    res      = -1;
+       u32                    command;
+       u32                    regValue;
+       inca_tx_descriptor_t * tx_desc  = KSEG1ADDR(&tx_ring[tx_new]);
 
 #if 0
        printf("Entered inca_switch_send()\n");
@@ -373,7 +371,7 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet, int l
        KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
 
        tx_hold = tx_new;
-       tx_new  = (tx_new + 1) % NUM_TX_DESC;
+       tx_new  = (tx_new + 1) % NUM_TX_DESC;
 
 
        if (! initialized) {
@@ -409,7 +407,7 @@ Done:
 
 static int inca_switch_recv(struct eth_device *dev)
 {
-       int                    length  = 0;
+       int                    length  = 0;
        inca_rx_descriptor_t * rx_desc;
 
 #if 0
@@ -450,8 +448,7 @@ static int inca_switch_recv(struct eth_device *dev)
 #if 0
                        printf("Received %d bytes\n", length);
 #endif
-                       NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]),
-                                   length - 4);
+                       NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
                } else {
 #if 1
                        printf("Zero length!!!\n");
@@ -516,13 +513,13 @@ static void inca_init_switch_chip(void)
 
 #if 1
        /* init MDIO configuration:
-        *      MDS (Poll speed):       0x01 (4ms)
-        *      PHY_LAN_ADDR:           0x06
-        *      PHY_PC_ADDR:            0x05
+        *      MDS (Poll speed):       0x01 (4ms)
+        *      PHY_LAN_ADDR:           0x06
+        *      PHY_PC_ADDR:            0x05
         *      UEP (Use External PHY): 0x00 (Internal PHY is used)
-        *      PS (Port Select):       0x00 (PT/UMM for LAN)
-        *      PT (PHY Test):          0x00 (no test mode)
-        *      UMM (Use MDIO Mode):    0x00 (state machine is disabled)
+        *      PS (Port Select):       0x00 (PT/UMM for LAN)
+        *      PT (PHY Test):          0x00 (no test mode)
+        *      UMM (Use MDIO Mode):    0x00 (state machine is disabled)
         */
        SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
 
@@ -540,39 +537,39 @@ static void inca_init_switch_chip(void)
 
        /* MDIO_ACC:
         *      RA (Request/Ack)  0x01 (Request)
-        *      RW (Read/Write)   0x01 (Write)
-        *      PHY_ADDR          0x05 (PC)
-        *      REG_ADDR          0x00 (PHY_BCR: basic control register)
-        *      PHY_DATA          0x8000
-        *                    Reset                   - software reset
-        *                    LB (loop back)          - normal
-        *                    SS (speed select)       - 10 Mbit/s
+        *      RW (Read/Write)   0x01 (Write)
+        *      PHY_ADDR          0x05 (PC)
+        *      REG_ADDR          0x00 (PHY_BCR: basic control register)
+        *      PHY_DATA          0x8000
+        *                    Reset                   - software reset
+        *                    LB (loop back)          - normal
+        *                    SS (speed select)       - 10 Mbit/s
         *                    ANE (auto neg. enable)  - enable
-        *                    PD (power down)         - normal
-        *                    ISO (isolate)           - normal
+        *                    PD (power down)         - normal
+        *                    ISO (isolate)           - normal
         *                    RAN (restart auto neg.) - normal
-        *                    DM (duplex mode)        - half duplex
+        *                    DM (duplex mode)        - half duplex
         *                    CT (collision test)     - enable
         */
        SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
 
        /* MDIO_ACC:
         *      RA (Request/Ack)  0x01 (Request)
-        *      RW (Read/Write)   0x01 (Write)
-        *      PHY_ADDR          0x06 (LAN)
-        *      REG_ADDR          0x00 (PHY_BCR: basic control register)
-        *      PHY_DATA          0x8000
-        *                    Reset                   - software reset
-        *                    LB (loop back)          - normal
-        *                    SS (speed select)       - 10 Mbit/s
+        *      RW (Read/Write)   0x01 (Write)
+        *      PHY_ADDR          0x06 (LAN)
+        *      REG_ADDR          0x00 (PHY_BCR: basic control register)
+        *      PHY_DATA          0x8000
+        *                    Reset                   - software reset
+        *                    LB (loop back)          - normal
+        *                    SS (speed select)       - 10 Mbit/s
         *                    ANE (auto neg. enable)  - enable
-        *                    PD (power down)         - normal
-        *                    ISO (isolate)           - normal
+        *                    PD (power down)         - normal
+        *                    ISO (isolate)           - normal
         *                    RAN (restart auto neg.) - normal
-        *                    DM (duplex mode)        - half duplex
+        *                    DM (duplex mode)        - half duplex
         *                    CT (collision test)     - enable
         */
-       SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
+       SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
 
 #endif
 
@@ -723,7 +720,7 @@ static int inca_amdix(void)
                                (0x6 << 21) |   /* LAN          */
                                (31  << 16));   /* PHY_SCSR     */
                        do {
-                               SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
+                               SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
                        } while (phyReg31 & (1 << 31));
 
                        switch ((phyReg31 >> 2) & 0x7) {
@@ -755,7 +752,7 @@ static int inca_amdix(void)
                                        (0x6 << 21) |   /* LAN          */
                                        (6   << 16));   /* PHY_ANER     */
                                do {
-                                       SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
+                                       SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
                                } while (phyReg6 & (1 << 31));
 
                                /* We are Autoneg-able.
@@ -768,7 +765,7 @@ static int inca_amdix(void)
                                                (0x6 << 21) |   /* LAN          */
                                                (4   << 16));   /* PHY_ANAR     */
                                        do {
-                                               SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
+                                               SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
                                        } while (phyReg4 & (1 << 31));
 
                                        /* We advertise PAUSE capab.
@@ -781,7 +778,7 @@ static int inca_amdix(void)
                                                        (0x6 << 21) |   /* LAN          */
                                                        (5   << 16));   /* PHY_ANLPAR   */
                                                do {
-                                                       SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
+                                                       SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
                                                } while (phyReg5 & (1 << 31));
 
                                                /* Link partner is PAUSE capab.