geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux...

SVN-Revision: 30022

diff --git a/target/linux/x86/patches-3.2/002-geos_platform.patch b/target/linux/x86/patches-3.2/002-geos_platform.patch
new file mode 100644 (file)
index 0000000..cdb8dc2
--- /dev/null
+++ b/target/linux/x86/patches-3.2/002-geos_platform.patch
@@ -0,0 +1,188 @@
+From 31bc84d45320dad2392384381ad4d818ab21087a Mon Sep 17 00:00:00 2001
+From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
+Date: Wed, 18 Jan 2012 11:15:33 -0700
+Subject: [PATCH 1/1] geos: Platform driver for Geos and Geos2 single-board
+ computers.
+
+Trivial platform driver for Traverse Technologies Geos and Geos2
+single-board computers. Uses SMBIOS to identify platform.
+Based on progressive revisions of the leds-net5501 driver that
+was rewritten by Ed Wildgoose as a platform driver.
+
+Supports GPIO-based LEDs (3) and 1 polled button which is
+typically used for a soft reset.
+
+Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
+Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
+Acked-by: Andres Salomon <dilinger@queued.net>
+Cc: Richard Purdie <rpurdie@rpsys.net>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+---
+ arch/x86/Kconfig                 |    7 ++
+ arch/x86/platform/geode/Makefile |    1 +
+ arch/x86/platform/geode/geos.c   |  128 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 136 insertions(+), 0 deletions(-)
+ create mode 100644 arch/x86/platform/geode/geos.c
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 07c3f15..4ee921b 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -2168,6 +2168,13 @@ config ALIX
+ 
+         Note: You have to set alix.force=1 for boards with Award BIOS.
+ 
++config GEOS
++      bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
++      select GPIOLIB
++      depends on DMI
++      ---help---
++        This option enables system support for the Traverse Technologies GEOS.
++
+ endif # X86_32
+ 
+ config AMD_NB
+diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
+index 07c9cd0..d8ba564 100644
+--- a/arch/x86/platform/geode/Makefile
++++ b/arch/x86/platform/geode/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_ALIX)            += alix.o
++obj-$(CONFIG_GEOS)            += geos.o
+diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
+new file mode 100644
+index 0000000..c2e6d53
+--- /dev/null
++++ b/arch/x86/platform/geode/geos.c
+@@ -0,0 +1,128 @@
++/*
++ * System Specific setup for Traverse Technologies GEOS.
++ * At the moment this means setup of GPIO control of LEDs.
++ *
++ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
++ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
++ *                and Philip Prindeville <philipp@redfish-solutions.com>
++ *
++ * TODO: There are large similarities with leds-net5501.c
++ * by Alessandro Zummo <a.zummo@towertech.it>
++ * In the future leds-net5501.c should be migrated over to platform
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/string.h>
++#include <linux/module.h>
++#include <linux/leds.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++#include <linux/dmi.h>
++
++#include <asm/geode.h>
++
++static struct gpio_keys_button geos_gpio_buttons[] = {
++      {
++              .code = KEY_RESTART,
++              .gpio = 3,
++              .active_low = 1,
++              .desc = "Reset button",
++              .type = EV_KEY,
++              .wakeup = 0,
++              .debounce_interval = 100,
++              .can_disable = 0,
++      }
++};
++static struct gpio_keys_platform_data geos_buttons_data = {
++      .buttons = geos_gpio_buttons,
++      .nbuttons = ARRAY_SIZE(geos_gpio_buttons),
++      .poll_interval = 20,
++};
++
++static struct platform_device geos_buttons_dev = {
++      .name = "gpio-keys-polled",
++      .id = 1,
++      .dev = {
++              .platform_data = &geos_buttons_data,
++      }
++};
++
++static struct gpio_led geos_leds[] = {
++      {
++              .name = "geos:1",
++              .gpio = 6,
++              .default_trigger = "default-on",
++              .active_low = 1,
++      },
++      {
++              .name = "geos:2",
++              .gpio = 25,
++              .default_trigger = "default-off",
++              .active_low = 1,
++      },
++      {
++              .name = "geos:3",
++              .gpio = 27,
++              .default_trigger = "default-off",
++              .active_low = 1,
++      },
++};
++
++static struct gpio_led_platform_data geos_leds_data = {
++      .num_leds = ARRAY_SIZE(geos_leds),
++      .leds = geos_leds,
++};
++
++static struct platform_device geos_leds_dev = {
++      .name = "leds-gpio",
++      .id = -1,
++      .dev.platform_data = &geos_leds_data,
++};
++
++static struct __initdata platform_device *geos_devs[] = {
++      &geos_buttons_dev,
++      &geos_leds_dev,
++};
++
++static void __init register_geos(void)
++{
++      /* Setup LED control through leds-gpio driver */
++      platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
++}
++
++static int __init geos_init(void)
++{
++      const char *vendor, *product;
++
++      if (!is_geode())
++              return 0;
++
++      vendor = dmi_get_system_info(DMI_SYS_VENDOR);
++      if (!vendor || strcmp(vendor, "Traverse Technologies"))
++              return 0;
++
++      product = dmi_get_system_info(DMI_PRODUCT_NAME);
++      if (!product || strcmp(product, "Geos"))
++              return 0;
++
++      printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
++             KBUILD_MODNAME, vendor, product);
++
++      register_geos();
++
++      return 0;
++}
++
++module_init(geos_init);
++
++MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
++MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
++MODULE_LICENSE("GPL");
+-- 
+1.7.7.4
+

diff --git a/target/linux/x86/patches-3.3/002-geos_platform.patch b/target/linux/x86/patches-3.3/002-geos_platform.patch
new file mode 100644 (file)
index 0000000..cdb8dc2
--- /dev/null
+++ b/target/linux/x86/patches-3.3/002-geos_platform.patch
@@ -0,0 +1,188 @@
+From 31bc84d45320dad2392384381ad4d818ab21087a Mon Sep 17 00:00:00 2001
+From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
+Date: Wed, 18 Jan 2012 11:15:33 -0700
+Subject: [PATCH 1/1] geos: Platform driver for Geos and Geos2 single-board
+ computers.
+
+Trivial platform driver for Traverse Technologies Geos and Geos2
+single-board computers. Uses SMBIOS to identify platform.
+Based on progressive revisions of the leds-net5501 driver that
+was rewritten by Ed Wildgoose as a platform driver.
+
+Supports GPIO-based LEDs (3) and 1 polled button which is
+typically used for a soft reset.
+
+Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
+Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
+Acked-by: Andres Salomon <dilinger@queued.net>
+Cc: Richard Purdie <rpurdie@rpsys.net>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+---
+ arch/x86/Kconfig                 |    7 ++
+ arch/x86/platform/geode/Makefile |    1 +
+ arch/x86/platform/geode/geos.c   |  128 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 136 insertions(+), 0 deletions(-)
+ create mode 100644 arch/x86/platform/geode/geos.c
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 07c3f15..4ee921b 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -2168,6 +2168,13 @@ config ALIX
+ 
+         Note: You have to set alix.force=1 for boards with Award BIOS.
+ 
++config GEOS
++      bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
++      select GPIOLIB
++      depends on DMI
++      ---help---
++        This option enables system support for the Traverse Technologies GEOS.
++
+ endif # X86_32
+ 
+ config AMD_NB
+diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
+index 07c9cd0..d8ba564 100644
+--- a/arch/x86/platform/geode/Makefile
++++ b/arch/x86/platform/geode/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_ALIX)            += alix.o
++obj-$(CONFIG_GEOS)            += geos.o
+diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
+new file mode 100644
+index 0000000..c2e6d53
+--- /dev/null
++++ b/arch/x86/platform/geode/geos.c
+@@ -0,0 +1,128 @@
++/*
++ * System Specific setup for Traverse Technologies GEOS.
++ * At the moment this means setup of GPIO control of LEDs.
++ *
++ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
++ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
++ *                and Philip Prindeville <philipp@redfish-solutions.com>
++ *
++ * TODO: There are large similarities with leds-net5501.c
++ * by Alessandro Zummo <a.zummo@towertech.it>
++ * In the future leds-net5501.c should be migrated over to platform
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/string.h>
++#include <linux/module.h>
++#include <linux/leds.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++#include <linux/dmi.h>
++
++#include <asm/geode.h>
++
++static struct gpio_keys_button geos_gpio_buttons[] = {
++      {
++              .code = KEY_RESTART,
++              .gpio = 3,
++              .active_low = 1,
++              .desc = "Reset button",
++              .type = EV_KEY,
++              .wakeup = 0,
++              .debounce_interval = 100,
++              .can_disable = 0,
++      }
++};
++static struct gpio_keys_platform_data geos_buttons_data = {
++      .buttons = geos_gpio_buttons,
++      .nbuttons = ARRAY_SIZE(geos_gpio_buttons),
++      .poll_interval = 20,
++};
++
++static struct platform_device geos_buttons_dev = {
++      .name = "gpio-keys-polled",
++      .id = 1,
++      .dev = {
++              .platform_data = &geos_buttons_data,
++      }
++};
++
++static struct gpio_led geos_leds[] = {
++      {
++              .name = "geos:1",
++              .gpio = 6,
++              .default_trigger = "default-on",
++              .active_low = 1,
++      },
++      {
++              .name = "geos:2",
++              .gpio = 25,
++              .default_trigger = "default-off",
++              .active_low = 1,
++      },
++      {
++              .name = "geos:3",
++              .gpio = 27,
++              .default_trigger = "default-off",
++              .active_low = 1,
++      },
++};
++
++static struct gpio_led_platform_data geos_leds_data = {
++      .num_leds = ARRAY_SIZE(geos_leds),
++      .leds = geos_leds,
++};
++
++static struct platform_device geos_leds_dev = {
++      .name = "leds-gpio",
++      .id = -1,
++      .dev.platform_data = &geos_leds_data,
++};
++
++static struct __initdata platform_device *geos_devs[] = {
++      &geos_buttons_dev,
++      &geos_leds_dev,
++};
++
++static void __init register_geos(void)
++{
++      /* Setup LED control through leds-gpio driver */
++      platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
++}
++
++static int __init geos_init(void)
++{
++      const char *vendor, *product;
++
++      if (!is_geode())
++              return 0;
++
++      vendor = dmi_get_system_info(DMI_SYS_VENDOR);
++      if (!vendor || strcmp(vendor, "Traverse Technologies"))
++              return 0;
++
++      product = dmi_get_system_info(DMI_PRODUCT_NAME);
++      if (!product || strcmp(product, "Geos"))
++              return 0;
++
++      printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
++             KBUILD_MODNAME, vendor, product);
++
++      register_geos();
++
++      return 0;
++}
++
++module_init(geos_init);
++
++MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
++MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
++MODULE_LICENSE("GPL");
+-- 
+1.7.7.4
+