[PATCH] powerpc/pseries: EEH Cleanup

This patch removes unnecessary exports, marks functions as static when
possible, and simplifies some list-related code.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9b2b1cb117b37f16db490e37a61482170a947729..780fb27a0099e24ca66b3fee2fbb9a5f7a258f1b 100644 (file)
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -865,7 +865,7 @@ void __init eeh_init(void)
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-void eeh_add_device_early(struct device_node *dn)
+static void eeh_add_device_early(struct device_node *dn)
 {
        struct pci_controller *phb;
        struct eeh_early_enable_info info;
@@ -882,7 +882,6 @@ void eeh_add_device_early(struct device_node *dn)
        info.buid_lo = BUID_LO(phb->buid);
        early_enable_eeh(dn, &info);
 }
-EXPORT_SYMBOL_GPL(eeh_add_device_early);
 
 void eeh_add_device_tree_early(struct device_node *dn)
 {
@@ -893,20 +892,6 @@ void eeh_add_device_tree_early(struct device_node *dn)
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-       struct pci_dev *dev;
-
-       list_for_each_entry(dev, &bus->devices, bus_list) {
-               eeh_add_device_late(dev);
-               if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-                       struct pci_bus *subbus = dev->subordinate;
-                       if (subbus)
-                               eeh_add_device_tree_late(subbus);
-               }
-       }
-}
-
 /**
  * eeh_add_device_late - perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
@@ -914,7 +899,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-void eeh_add_device_late(struct pci_dev *dev)
+static void eeh_add_device_late(struct pci_dev *dev)
 {
        struct device_node *dn;
        struct pci_dn *pdn;
@@ -933,16 +918,33 @@ void eeh_add_device_late(struct pci_dev *dev)
 
        pci_addr_cache_insert_device (dev);
 }
-EXPORT_SYMBOL_GPL(eeh_add_device_late);
+
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               eeh_add_device_late(dev);
+               if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+                       struct pci_bus *subbus = dev->subordinate;
+                       if (subbus)
+                               eeh_add_device_tree_late(subbus);
+               }
+       }
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
 
 /**
  * eeh_remove_device - undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
  *
- * This routine should be when a device is removed from a running
- * system (e.g. by hotplug or dlpar).
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar).  It unregisters
+ * the PCI device from the EEH subsystem.  I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
  */
-void eeh_remove_device(struct pci_dev *dev)
+static void eeh_remove_device(struct pci_dev *dev)
 {
        struct device_node *dn;
        if (!dev || !eeh_subsystem_enabled)
@@ -958,21 +960,17 @@ void eeh_remove_device(struct pci_dev *dev)
        PCI_DN(dn)->pcidev = NULL;
        pci_dev_put (dev);
 }
-EXPORT_SYMBOL_GPL(eeh_remove_device);
 
 void eeh_remove_bus_device(struct pci_dev *dev)
 {
+       struct pci_bus *bus = dev->subordinate;
+       struct pci_dev *child, *tmp;
+
        eeh_remove_device(dev);
-       if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-               struct pci_bus *bus = dev->subordinate;
-               struct list_head *ln;
-               if (!bus)
-                       return; 
-               for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-                       struct pci_dev *pdev = pci_dev_b(ln);
-                       if (pdev)
-                               eeh_remove_bus_device(pdev);
-               }
+
+       if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+               list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+                        eeh_remove_bus_device(child);
        }
 }
 EXPORT_SYMBOL_GPL(eeh_remove_bus_device);

diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 5207758a6dd9d4b760623dd2218d848964f7da9b..868c7139dbfff8db6d6730db3900e0ccce6add4d 100644 (file)
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -60,23 +60,9 @@ void __init pci_addr_cache_build(void);
  * device (including config space i/o).  Call eeh_add_device_late
  * to finish the eeh setup for this device.
  */
-void eeh_add_device_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *dev);
 void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_tree_late(struct pci_bus *);
 
-/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar).  It unregisters
- * the PCI device from the EEH subsystem.  I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-void eeh_remove_device(struct pci_dev *);
-
 /**
  * eeh_remove_device_recursive - undo EEH for device & children.
  * @dev: pci device to be removed
@@ -116,12 +102,6 @@ static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *d
 
 static inline void pci_addr_cache_build(void) { }
 
-static inline void eeh_add_device_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
-static inline void eeh_remove_device(struct pci_dev *dev) { }
-
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }