pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
if ((pcic->pcic_config_space_addr =
ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) {
- prom_printf("PCIC: Error, cannot map"
+ prom_printf("PCIC: Error, cannot map "
"PCI Configuration Space Address.\n");
prom_halt();
}
pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
if ((pcic->pcic_config_space_data =
ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) {
- prom_printf("PCIC: Error, cannot map"
+ prom_printf("PCIC: Error, cannot map "
"PCI Configuration Space Data.\n");
prom_halt();
}
* board in a PCI slot. We must remap it
* under 64K but it is not done yet. XXX
*/
- printk("PCIC: Skipping I/O space at 0x%lx,"
- "this will Oops if a driver attaches;"
+ printk("PCIC: Skipping I/O space at 0x%lx, "
+ "this will Oops if a driver attaches "
"device '%s' at %02x:%02x)\n", address,
namebuf, dev->bus->number, dev->devfn);
}